4 years agoSession/View: Save triggers in a list and use it
Soeren Apel [Wed, 7 Feb 2018 09:51:30 +0000 (10:51 +0100)]
Session/View: Save triggers in a list and use it

4 years agoSession: Clean up header a little
Soeren Apel [Wed, 24 Jan 2018 08:35:23 +0000 (09:35 +0100)]
Session: Clean up header a little

4 years agoAdjust unit tests
Soeren Apel [Tue, 6 Feb 2018 18:28:37 +0000 (19:28 +0100)]
Adjust unit tests

4 years agoChange the number of minor ticks to be either 4 or 5
Cenkron [Wed, 10 Jan 2018 15:10:58 +0000 (09:10 -0600)]
Change the number of minor ticks to be either 4 or 5

Depends on the current tick interval size, in the sense of the 1, 2, 5
sequence. It was originally always 4.

4 years agoProvide a settings checkbox for showing zero at the trigger
Cenkron [Wed, 10 Jan 2018 02:28:11 +0000 (20:28 -0600)]
Provide a settings checkbox for showing zero at the trigger

4 years agoDecodeSignal: only pass non-zero sample rate to decoders
Gerhard Sittig [Sun, 28 Jan 2018 20:02:54 +0000 (21:02 +0100)]
DecodeSignal: only pass non-zero sample rate to decoders

As reported in bug #1118 not all input sources provide a samplerate, and
decoder instances may not cope with a rate spec of 0. Only pass non-zero
sample rates to the decoder stack. This improves robustness in addition
to the specific fix for #1118 in the decoders' implementations.

4 years agodoc: Update pulseview(1) manpage, add --no-scan option (-D)
Gerhard Sittig [Wed, 24 Jan 2018 20:22:43 +0000 (21:22 +0100)]
doc: Update pulseview(1) manpage, add --no-scan option (-D)

4 years agomain: introduce -D cmdline option, don't auto-scan for devices
Gerhard Sittig [Wed, 24 Jan 2018 20:11:50 +0000 (21:11 +0100)]
main: introduce -D cmdline option, don't auto-scan for devices

Add a -D command line option which skips auto-detection of devices upon
startup. This can speedup program startup for setups with known devices,
and allows to skip the scan for troubled drivers which might break the
startup phase.

This -D option can be combined with -d specs, either presence or absence
of -d is acceptable when -D is specified. Users still can interactively
scan for and use devices after program startup.

This resolves bug #1116.

4 years agowin32: Use -mwindows only for non-Debug targets.
Cenkron [Fri, 12 Jan 2018 18:43:27 +0000 (12:43 -0600)]
win32: Use -mwindows only for non-Debug targets.

Direct cmake to apply the -mwindows linker switch based on a cmake
command line argument rather than by using a patch file. The command
line argument is -DCMAKE_BUILD_TYPE=xxxxx and applies the linker switch
only to WIN32 builds that are not Debug.

4 years agoDecodeSignal: Void a session pointer after destroy() call
Gerhard Sittig [Tue, 2 Jan 2018 18:51:22 +0000 (19:51 +0100)]
DecodeSignal: Void a session pointer after destroy() call

Fixup an error path when starting a created decoder session fails.

4 years agomain.cpp: check log level range before using its value
Gerhard Sittig [Tue, 2 Jan 2018 21:13:06 +0000 (22:13 +0100)]
main.cpp: check log level range before using its value

(Silently) ignore invalid -l loglevel specs. This avoids a crash
reported in bug #1071.

4 years agoFix unit tests
Soeren Apel [Sun, 7 Jan 2018 20:48:54 +0000 (21:48 +0100)]
Fix unit tests

4 years agoAdd segment display mode UI controls and some related changes
Soeren Apel [Sun, 7 Jan 2018 20:09:55 +0000 (21:09 +0100)]
Add segment display mode UI controls and some related changes

4 years agoAdd segment display mode icons
Soeren Apel [Sun, 7 Jan 2018 20:00:47 +0000 (21:00 +0100)]
Add segment display mode icons

4 years agoSession: Make get_segment_count() consider all segments
Soeren Apel [Sun, 7 Jan 2018 19:15:19 +0000 (20:15 +0100)]
Session: Make get_segment_count() consider all segments

Also changes the type for the getters to uint32_t.

4 years agoSupply the segment ID when adding samples to optimize trace painting
Soeren Apel [Fri, 5 Jan 2018 19:48:20 +0000 (20:48 +0100)]
Supply the segment ID when adding samples to optimize trace painting

Use case is as follows:
- Capture 20+ segments with ~500kS each
- Afterwards, enable conversion for a channel

Without this change, the converted logic will be repainted
20++ times because we are only told that new samples were
added but not which segment.

With this change, the logic trace is only painted when we
see that samples were added to the segment we're showing.

4 years agoAdd segment_id to all segment classes
Soeren Apel [Fri, 5 Jan 2018 14:24:41 +0000 (15:24 +0100)]
Add segment_id to all segment classes

4 years agoLogicSegment: Don't use new/delete in get_unpacked_sample()
Soeren Apel [Wed, 3 Jan 2018 23:30:28 +0000 (00:30 +0100)]
LogicSegment: Don't use new/delete in get_unpacked_sample()

4 years agoLogicSegment: Limit end in get_subsampled_edges() if needed
Soeren Apel [Wed, 3 Jan 2018 16:14:51 +0000 (17:14 +0100)]
LogicSegment: Limit end in get_subsampled_edges() if needed

This is necessary because there is a race condition between
adding samples and trace repainting.

4 years agoSignalBase: Don't terminate conversion when there's no data
Soeren Apel [Tue, 2 Jan 2018 10:07:36 +0000 (11:07 +0100)]
SignalBase: Don't terminate conversion when there's no data

Instead of terminating, we wait instead.
We do this because SignalBase::on_samples_added() somehow doesn't
reliably see that there's no conversion thread active anymore.
conversion_thread_.joinable() returns true when the thread was
already terminated for whatever reason, resulting in on_samples_added()
trying to notify a non-existant thread.

4 years agoImplement Trace::ShowLastCompleteSegmentOnly display mode
Soeren Apel [Thu, 28 Dec 2017 16:37:48 +0000 (17:37 +0100)]
Implement Trace::ShowLastCompleteSegmentOnly display mode

4 years agoDecodeSignal: Restructure metadata handling
Soeren Apel [Wed, 27 Dec 2017 09:31:30 +0000 (10:31 +0100)]
DecodeSignal: Restructure metadata handling

Instead of handling the metadata separately from the mux/decode segments,
it's much neater to handle both together. Doing this also allows us to
remove the need for query_input_metadata() since we're taking the metadata
from the muxed logic segments.

4 years agoSignalBase: Implement multi-segment conversion
Soeren Apel [Thu, 21 Dec 2017 22:10:36 +0000 (23:10 +0100)]
SignalBase: Implement multi-segment conversion

4 years agoFinalize segment decoding
Soeren Apel [Tue, 19 Dec 2017 19:20:57 +0000 (20:20 +0100)]
Finalize segment decoding

4 years agoView: Fixes related to multi-segment display
Soeren Apel [Wed, 13 Dec 2017 16:19:29 +0000 (17:19 +0100)]
View: Fixes related to multi-segment display

4 years agoDecodeSignal: Mux all segments
Soeren Apel [Fri, 15 Dec 2017 14:16:41 +0000 (15:16 +0100)]
DecodeSignal: Mux all segments

4 years agoPrepare multi-segment protocol decoding ability
Soeren Apel [Wed, 29 Nov 2017 08:32:24 +0000 (09:32 +0100)]
Prepare multi-segment protocol decoding ability

4 years agoDecodeSignal: Allow muxed logic data to be cached
Soeren Apel [Wed, 20 Dec 2017 19:22:27 +0000 (20:22 +0100)]
DecodeSignal: Allow muxed logic data to be cached

4 years agoDecodeSignal: Rename some items
Soeren Apel [Thu, 23 Nov 2017 17:30:26 +0000 (18:30 +0100)]
DecodeSignal: Rename some items

4 years agoBegin PD multisegment support
Soeren Apel [Tue, 21 Nov 2017 21:07:09 +0000 (22:07 +0100)]
Begin PD multisegment support

4 years agoMove current_segment_ to Trace
Soeren Apel [Tue, 21 Nov 2017 21:07:09 +0000 (22:07 +0100)]
Move current_segment_ to Trace

4 years agoFlesh out segment display mode handling
Soeren Apel [Mon, 20 Nov 2017 21:50:53 +0000 (22:50 +0100)]
Flesh out segment display mode handling

4 years agoImplement segment display mode handling and update notifications
Soeren Apel [Tue, 7 Nov 2017 09:56:25 +0000 (10:56 +0100)]
Implement segment display mode handling and update notifications

4 years agoDon't set SR_CONF_LIMIT_FRAMES to 1
Soeren Apel [Fri, 15 Dec 2017 22:56:39 +0000 (23:56 +0100)]

4 years agoMake it pass desktop-file-validate
probonopd [Fri, 24 Nov 2017 20:56:17 +0000 (20:56 +0000)]
Make it pass desktop-file-validate


4 years agoDecodeSignal: Make sure bit IDs are always up-to-date
Soeren Apel [Tue, 12 Dec 2017 22:31:35 +0000 (23:31 +0100)]
DecodeSignal: Make sure bit IDs are always up-to-date

https://www.youtube.com/watch?v=mw6Bd6Hv168 shows what
happens when this isn't done.

4 years agoSession: Fix mismatched delete operator.
Philipp Marek [Sat, 18 Nov 2017 12:53:24 +0000 (13:53 +0100)]
Session: Fix mismatched delete operator.

Mismatched free() / delete / delete []
   at 0x4C2D31B: operator delete(void*) (vg_replace_malloc.c:576)
   by 0x1C76D0: operator() (unique_ptr.h:78)
   by 0x1C76D0: ~unique_ptr (unique_ptr.h:268)
   by 0x1C76D0: pv::data::AnalogSegment::append_interleaved_samples(float const*, unsigned long, unsigned long) (analogsegment.cpp:78)
Address 0x1d123f70 is 0 bytes inside a block of size 312 alloc'd
   at 0x4C2C97F: operator new[](unsigned long) (vg_replace_malloc.c:423)
   by 0x1C765E: pv::data::AnalogSegment::append_interleaved_samples(float const*, unsigned long, unsigned long) (analogsegment.cpp:78)
   by 0x1AFDD5: pv::Session::feed_in_analog(std::shared_ptr<sigrok::Analog>) (session.cpp:1142)

4 years ago.gitignore: Don't care about the doxygen-generated files.
Philipp Marek [Sat, 18 Nov 2017 12:53:12 +0000 (13:53 +0100)]
.gitignore: Don't care about the doxygen-generated files.

4 years agoSession: Fix mismatched delete operator.
Philipp Marek [Fri, 17 Nov 2017 10:17:36 +0000 (11:17 +0100)]
Session: Fix mismatched delete operator.

Valgrind reported this here:

Mismatched free() / delete / delete []
   at 0x4C2D31B: operator delete(void*) (vg_replace_malloc.c:576)
   by 0x1C76D0: operator() (unique_ptr.h:78)
   by 0x1C76D0: ~unique_ptr (unique_ptr.h:268)
   by 0x1C76D0: pv::data::AnalogSegment::append_interleaved_samples(float const*, unsigned long, unsigned long) (analogsegment.cpp:78)
   by 0x1AFDD5: pv::Session::feed_in_analog(std::shared_ptr<sigrok::Analog>) (session.cpp:1142)
   by 0x1B043C: pv::Session::data_feed_in(std::shared_ptr<sigrok::Device>, std::shared_ptr<sigrok::Packet>) (session.cpp:1187)
 Address 0x1cbf6b90 is 0 bytes inside a block of size 940 alloc'd
   at 0x4C2C97F: operator new[](unsigned long) (vg_replace_malloc.c:423)
   by 0x1C765E: pv::data::AnalogSegment::append_interleaved_samples(float const*, unsigned long, unsigned long) (analogsegment.cpp:78)
   by 0x1AFDD5: pv::Session::feed_in_analog(std::shared_ptr<sigrok::Analog>) (session.cpp:1142)

4 years agoRework new segment notification mechanism
Soeren Apel [Sun, 29 Oct 2017 22:38:06 +0000 (23:38 +0100)]
Rework new segment notification mechanism

4 years agoAppend new segments to the end, not the beginning of the list
Soeren Apel [Fri, 27 Oct 2017 16:44:51 +0000 (18:44 +0200)]
Append new segments to the end, not the beginning of the list

4 years agoSession: Query the device's sample rate when needed, not sooner
Soeren Apel [Mon, 9 Oct 2017 15:47:19 +0000 (17:47 +0200)]
Session: Query the device's sample rate when needed, not sooner

4 years agoDecodeSignal: Remove outdated code and comment
Soeren Apel [Sat, 23 Sep 2017 06:33:16 +0000 (08:33 +0200)]
DecodeSignal: Remove outdated code and comment

4 years agoSignalBase: Make sure PDs are restarted when conv options change
Soeren Apel [Fri, 22 Sep 2017 16:25:06 +0000 (18:25 +0200)]
SignalBase: Make sure PDs are restarted when conv options change

4 years agoTraceView: Properly handle the header resizing events
Soeren Apel [Fri, 22 Sep 2017 06:27:56 +0000 (08:27 +0200)]
TraceView: Properly handle the header resizing events

4 years agoTraceView: Make header resize state determination reliable
Soeren Apel [Fri, 22 Sep 2017 06:24:17 +0000 (08:24 +0200)]
TraceView: Make header resize state determination reliable

4 years agoView: Move comment to where it belongs
Soeren Apel [Tue, 19 Sep 2017 05:50:50 +0000 (07:50 +0200)]
View: Move comment to where it belongs

4 years agoAdjust trace view header width when signal names change
Soeren Apel [Tue, 19 Sep 2017 05:48:36 +0000 (07:48 +0200)]
Adjust trace view header width when signal names change

This change is primarily needed because before, newly
created decode signals had a name assigned to them at time
of the constructor call. This changed, and now the name
is empty upon creation, breaking the previously working
header size adjustment.

4 years agoDecodeTrace: Reset cached trace properties when decoder stack resets
Soeren Apel [Sat, 9 Sep 2017 07:01:07 +0000 (09:01 +0200)]
DecodeTrace: Reset cached trace properties when decoder stack resets

4 years agoDecodeSignal: Break up annotation storage to allow multiple segments
Soeren Apel [Sat, 9 Sep 2017 06:42:36 +0000 (08:42 +0200)]
DecodeSignal: Break up annotation storage to allow multiple segments

4 years agoImplement showing only the selected segment
Soeren Apel [Thu, 31 Aug 2017 06:24:53 +0000 (08:24 +0200)]
Implement showing only the selected segment

4 years agoAdd segment selector UI + helpers
Soeren Apel [Sun, 10 Sep 2017 19:26:59 +0000 (21:26 +0200)]
Add segment selector UI + helpers

4 years agorowdata: Use emplace_back() for Annotation objects.
Uwe Hermann [Wed, 2 Aug 2017 06:14:31 +0000 (08:14 +0200)]
rowdata: Use emplace_back() for Annotation objects.

This should eliminate one unnecessary allocation per annotation.

4 years agoRename DecodeSignal::segment_ to logic_mux_segment_ for clarity
Soeren Apel [Fri, 1 Sep 2017 06:21:10 +0000 (08:21 +0200)]
Rename DecodeSignal::segment_ to logic_mux_segment_ for clarity

4 years agoFix #1024 by changing decode channel assigment to PDs
Soeren Apel [Fri, 8 Sep 2017 16:14:47 +0000 (18:14 +0200)]
Fix #1024 by changing decode channel assigment to PDs

When assigning the decoder stack channels to the libsrd
instance's channels, channels that had no signal assigned
to them were still assigned anyway. This patch fixes this bug.

After doing this, another subtle bug became apparent:
The mapping between channels and bits in the data stream sent
to the PD was done via DecodeChannel->id. This is however
insufficient as the channels of the decoder stack have
IDs that may or may not match the ID needed for the data
stream. Example:

A PD has 4 channels: A, B, C and D. In PV, those channels
have the IDs 0, 1, 2 and 3. If the user only assigns A and D,
Decoder::create_decoder_inst() will use the IDs 0 and 3 as
the bit positions of those signals in the data stream sent
to libsrd. This is obviously wrong.

Hence, we now use a separate bit_id for this purpose.

4 years agoAnalogSignal: Prevent threshold bg from spilling beyond extents
Soeren Apel [Mon, 21 Aug 2017 17:58:49 +0000 (19:58 +0200)]
AnalogSignal: Prevent threshold bg from spilling beyond extents

4 years agoImplement "show conversion thresholds as dots" mode
Soeren Apel [Sat, 19 Aug 2017 21:58:36 +0000 (23:58 +0200)]
Implement "show conversion thresholds as dots" mode

4 years agoConvert threshold display setting to a multi-value choice
Soeren Apel [Sun, 20 Aug 2017 14:18:50 +0000 (16:18 +0200)]
Convert threshold display setting to a multi-value choice

4 years agoAnalogSignal: Make threshold neutral area darker
Soeren Apel [Thu, 17 Aug 2017 06:30:29 +0000 (08:30 +0200)]
AnalogSignal: Make threshold neutral area darker

4 years agoSession: Rework frame handling
Soeren Apel [Mon, 14 Aug 2017 15:52:43 +0000 (17:52 +0200)]
Session: Rework frame handling

4 years agoAnalogSignal: Use setting change handler for threshold display
Soeren Apel [Tue, 8 Aug 2017 17:40:11 +0000 (19:40 +0200)]
AnalogSignal: Use setting change handler for threshold display

4 years agoAnalogSignal: Draw analog thresholds differently
Soeren Apel [Mon, 7 Aug 2017 19:41:11 +0000 (21:41 +0200)]
AnalogSignal: Draw analog thresholds differently

Instead of using a patterned region on top of the trace,
show the thresholds by using different background colors
for the individual areas: green/grey/red.

4 years agoView: Update ruler after restoring session
Soeren Apel [Sat, 5 Aug 2017 20:38:45 +0000 (22:38 +0200)]
View: Update ruler after restoring session

If we don't do this, the ruler is out-of-sync with the rest
of the view until the session is loaded and goes into stopped
state. At that point, the ruler is updated, which is too late.

4 years agoSignalBase: Default to dynamic conversion preset, not custom values
Soeren Apel [Wed, 2 Aug 2017 16:42:34 +0000 (18:42 +0200)]
SignalBase: Default to dynamic conversion preset, not custom values

The reason for this change is that when you initially select a
conversion from the channel config popup dialog, the threshold
will be set to "0.0V" or "0.0V/0.0V", respectively.
This is of course not what we want and the root cause is that
when no preset is selected, NoPreset is assumed instead of
DynamicPreset. This patch changes this.

4 years agoUse min/max notification for autoranging of analog signals
Soeren Apel [Wed, 2 Aug 2017 16:23:32 +0000 (18:23 +0200)]
Use min/max notification for autoranging of analog signals

4 years agoMove delayed conversion starter to SignalBase
Soeren Apel [Wed, 2 Aug 2017 07:15:18 +0000 (09:15 +0200)]
Move delayed conversion starter to SignalBase

This way, we can use the same mechanism for changing
min/max as well, preventing multiple successive starts
of the conversion algorithm.
Preventing this is necessary because it makes the UI
stop updating for a significant amount of time, which
we obviously don't want.

4 years agoRemove SignalBase::A2LChannel
Soeren Apel [Tue, 1 Aug 2017 19:38:15 +0000 (21:38 +0200)]
Remove SignalBase::A2LChannel

4 years agoUse identifiers for fixed conversion preset values
Soeren Apel [Tue, 1 Aug 2017 19:35:15 +0000 (21:35 +0200)]
Use identifiers for fixed conversion preset values

4 years agoRestart min-max-based conversion if min or max change
Soeren Apel [Tue, 1 Aug 2017 18:58:46 +0000 (20:58 +0200)]
Restart min-max-based conversion if min or max change

4 years agoFix some random clang-tidy warnings.
Uwe Hermann [Tue, 1 Aug 2017 20:19:56 +0000 (22:19 +0200)]
Fix some random clang-tidy warnings.

4 years agoTrace view: Make the zero line for analog traces thicker
Soeren Apel [Mon, 31 Jul 2017 22:09:06 +0000 (00:09 +0200)]
Trace view: Make the zero line for analog traces thicker

This is to make it stand out more and make it easily

4 years agoImplement graphical display of A2L thresholds
Soeren Apel [Mon, 31 Jul 2017 20:31:54 +0000 (22:31 +0200)]
Implement graphical display of A2L thresholds

4 years agoTypo fix: treshold -> threshold
Soeren Apel [Sat, 29 Jul 2017 17:44:59 +0000 (19:44 +0200)]
Typo fix: treshold -> threshold

4 years agoAnalogSignal: Reword "traces to show" option
Soeren Apel [Sat, 29 Jul 2017 17:41:31 +0000 (19:41 +0200)]
AnalogSignal: Reword "traces to show" option

4 years agoAnalogSignal: Use pv::data::SignalBase namespace
Soeren Apel [Sat, 29 Jul 2017 17:33:47 +0000 (19:33 +0200)]
AnalogSignal: Use pv::data::SignalBase namespace

4 years agoImplement A2L presets and custom threshold handling
Soeren Apel [Mon, 31 Jul 2017 20:31:20 +0000 (22:31 +0200)]
Implement A2L presets and custom threshold handling

4 years agoUse getter for the conversion type instead of a local copy
Soeren Apel [Tue, 25 Jul 2017 14:09:08 +0000 (16:09 +0200)]
Use getter for the conversion type instead of a local copy

Don't ask me why I used a local copy in the first place,
even I can't figure it out :)

4 years agoSignalBase: Minor doxygen comments
Soeren Apel [Mon, 24 Jul 2017 06:57:51 +0000 (08:57 +0200)]
SignalBase: Minor doxygen comments

4 years agoTrace View: Add doxygen comments to some classes
Soeren Apel [Sun, 23 Jul 2017 20:17:16 +0000 (22:17 +0200)]
Trace View: Add doxygen comments to some classes

4 years agoImprove hover point signaling
Soeren Apel [Sun, 23 Jul 2017 07:35:25 +0000 (09:35 +0200)]
Improve hover point signaling

Two issues here:
1) it's bad style to have an event handler for an event
that was triggered in the same class
2) supplying the current hover point along with the event
is a sensible thing to do

4 years agoRemove signal scale handle
Soeren Apel [Thu, 20 Jul 2017 06:45:06 +0000 (08:45 +0200)]
Remove signal scale handle

It will be replaced by a different mechanism.

4 years agoTriggerMarker: Don't return "valid" drag point coordinates
Soeren Apel [Tue, 18 Jul 2017 18:40:33 +0000 (20:40 +0200)]
TriggerMarker: Don't return "valid" drag point coordinates

4 years agoRename ViewItem::point() to ViewItem::drag_point() for clarity
Soeren Apel [Tue, 18 Jul 2017 15:51:01 +0000 (17:51 +0200)]
Rename ViewItem::point() to ViewItem::drag_point() for clarity

4 years agoINSTALL/CMakeLists.txt: Bump libsigrokdecode requirement to >= 0.6.0.
Uwe Hermann [Fri, 21 Jul 2017 05:08:06 +0000 (07:08 +0200)]
INSTALL/CMakeLists.txt: Bump libsigrokdecode requirement to >= 0.6.0.

PulseView now relies on e.g. the fact that multiple libsigrokdecode
calls from different threads don't cause issues (which has not been the
case prior to libsigrokdecode 0.6.0).

4 years agoCMakeLists.txt: Bump libsigrokcxx requirement to 0.6.0.
Uwe Hermann [Fri, 21 Jul 2017 05:07:10 +0000 (07:07 +0200)]
CMakeLists.txt: Bump libsigrokcxx requirement to 0.6.0.

This was already documented in INSTALL, but the check wasn't updated.

4 years agoFix the build with ENABLE_DECODE=n.
Uwe Hermann [Wed, 19 Jul 2017 18:55:59 +0000 (20:55 +0200)]
Fix the build with ENABLE_DECODE=n.

  pv/dialogs/settings.cpp: In member function ‘QWidget* pv::dialogs::Settings::get_decoder_settings_form(QWidget*) const’:
  pv/dialogs/settings.cpp:218:1: error: no return statement in function returning non-void [-Werror=return-type]

4 years agoLogicSignal: Make trace height adjustable
Soeren Apel [Sun, 16 Jul 2017 20:09:19 +0000 (22:09 +0200)]
LogicSignal: Make trace height adjustable

4 years agoIntroduce "logic trace height" setting
Soeren Apel [Sun, 16 Jul 2017 19:29:26 +0000 (21:29 +0200)]
Introduce "logic trace height" setting

4 years agoAnalogSignal: Make div height adjustable
Soeren Apel [Sun, 16 Jul 2017 20:10:16 +0000 (22:10 +0200)]
AnalogSignal: Make div height adjustable

4 years agoIntroduce "default div height" setting
Soeren Apel [Sun, 16 Jul 2017 17:14:16 +0000 (19:14 +0200)]
Introduce "default div height" setting

4 years agoDecodeTrace: Resize trace when hiding/deleting a stacked PD
Soeren Apel [Fri, 14 Jul 2017 16:24:32 +0000 (18:24 +0200)]
DecodeTrace: Resize trace when hiding/deleting a stacked PD

The trace height depends on DecodeTrace::max_visible_rows_,
which needs to be updated when a stacked PD is hidden or
deleted. In order to do this, we reset max_visible_rows_ to
0 and then request a repaint.

4 years agoDecodeTrace: Fix trace resizing when new annotation classes appear
Soeren Apel [Fri, 14 Jul 2017 06:46:21 +0000 (08:46 +0200)]
DecodeTrace: Fix trace resizing when new annotation classes appear

4 years agoMake restack_items() available to all TraceTreeItemOwners
Soeren Apel [Fri, 14 Jul 2017 06:40:04 +0000 (08:40 +0200)]
Make restack_items() available to all TraceTreeItemOwners

Currently, TTIO:restack_items() is empty and only the
TraceGroup actually implements it. For this reason, decode
traces (and analog traces) are correctly pushing other traces
around when their size changes.
Top-level traces that are not part of a group however aren't
handled properly, simply overlapping when they grow.

This patch makes the code available to all TTIO-derived
classes, allowing all owners (including View itself) to
properly handle this event.

4 years agoDecodeTrace: Don't show tooltips destined for the header area
Soeren Apel [Wed, 12 Jul 2017 07:05:39 +0000 (09:05 +0200)]
DecodeTrace: Don't show tooltips destined for the header area

4 years agoDecodeSignal: Don't set name when creating the signal
Soeren Apel [Mon, 10 Jul 2017 17:14:35 +0000 (19:14 +0200)]
DecodeSignal: Don't set name when creating the signal

The thought behind this was to have no unnamed signals because
this may make debugging harder. However, giving the signal a
long name and shortening it when decoders are added isn't working
well. The reason is that the width of the header area can be
expanded programmatically but we don't shrink it because we
don't want to hide things the user may want to see.
This behavior in turn leads to the header width expanding when
a signal labeled "Empty decoder signal" is added, only to see
this very signal be renamed to e.g. "SPI" immediately afterwards.
As we don't shrink the header width, the header is now too wide.

4 years agoDecodeSignal: Fix flawed PD stack restoration
Soeren Apel [Thu, 6 Jul 2017 20:27:46 +0000 (22:27 +0200)]
DecodeSignal: Fix flawed PD stack restoration

Before, the libsigrokdecode sessions would be started without
having any channels assigned to it, which of course should be

4 years agoFix assertions
Soeren Apel [Thu, 6 Jul 2017 19:55:01 +0000 (21:55 +0200)]
Fix assertions

4 years agoFix unit tests
Soeren Apel [Thu, 6 Jul 2017 19:19:04 +0000 (21:19 +0200)]
Fix unit tests

4 years agoApply some clang-tidy fixes.
Uwe Hermann [Thu, 6 Jul 2017 06:56:39 +0000 (08:56 +0200)]
Apply some clang-tidy fixes.

This patch was generated using clang-tidy:

  clang-tidy -checks="-*,..." -fix

The following set of checks was enabled:


Add NOLINT to have clang-tidy (among other tools) ignore some lines
that are not meant to be changed.

4 years agoDecodeSignal: Auto-assign only the channels of newly added decoders
Soeren Apel [Wed, 5 Jul 2017 16:16:18 +0000 (18:16 +0200)]
DecodeSignal: Auto-assign only the channels of newly added decoders

Before, the channels of all decoders in the stack were auto-assigned,
potentially messing up the configuration the user chose.