Rename --no-scan to --dont-scan

diff --git a/doc/pulseview.1 b/doc/pulseview.1
index 834247b7022677b1057f2c6c71a7fa2ea56afdee..8289eaa85f858becb08069c3b67a4e742105402c 100644 (file)
--- a/doc/pulseview.1
+++ b/doc/pulseview.1
@@ -47,7 +47,7 @@ Specify the capture device to connect to. If the
 option is not supplied, PulseView attempts to re-connect to the
 most recently used device, or auto-detect available devices.
 .TP
-.BR "\-D, \-\-no\-scan "
+.BR "\-D, \-\-dont\-scan "
 Usually PulseView automatically scans all drivers to find suitable
 devices during program startup. This option disables the auto-scan.
 Users can either specify the

diff --git a/main.cpp b/main.cpp
index 8054e49be3315810bcd355d994c689f30471cd61..c7fe9bb2dedc38029d115b324c3da58d2a3f6d58 100644 (file)
--- a/main.cpp
+++ b/main.cpp
@@ -151,7 +151,7 @@ void usage()
                "  -V, --version                   Show release version\n"
                "  -l, --loglevel                  Set libsigrok/libsigrokdecode loglevel\n"
                "  -d, --driver                    Specify the device driver to use\n"
-               "  -D, --no-scan                   Don't auto-scan for devices, use -d spec only\n"
+               "  -D, --dont-scan                 Don't auto-scan for devices, use -d spec only\n"
                "  -i, --input-file                Load input from file\n"
                "  -I, --input-format              Input format\n"
                "  -c, --clean                     Don't restore previous sessions on startup\n"
@@ -183,7 +183,7 @@ int main(int argc, char *argv[])
                        {"version", no_argument, nullptr, 'V'},
                        {"loglevel", required_argument, nullptr, 'l'},
                        {"driver", required_argument, nullptr, 'd'},
-                       {"no-scan", no_argument, nullptr, 'D'},
+                       {"dont-scan", no_argument, nullptr, 'D'},
                        {"input-file", required_argument, nullptr, 'i'},
                        {"input-format", required_argument, nullptr, 'I'},
                        {"clean", no_argument, nullptr, 'c'},

diff --git a/manual/cli.txt b/manual/cli.txt
index c7798dff31e25532baef3a3bbaf25b3361e09c70..001b6e9f2eb1dc576305e7c0e813a25b0d64b116 100644 (file)
--- a/manual/cli.txt
+++ b/manual/cli.txt
@@ -21,22 +21,22 @@ a file on startup. Without -I, it is assumed that the file is in the native sigr
 You can also specify more than one file but they are all expected to be in the same format then.
 Example:
 
-       pulseview -i data.vcd -I vcd
+       pulseview -i data.csv -I csv:samplerate=3000000
 
 The remaining parameters are mostly for debug purposes:
 
        -V / --version          Shows the release version
        -l / --loglevel         Sets the libsigrok/libsigrokdecode log level (max is 5)
-       -D / --no-scan          Don't auto-scan 
+       -D / --dont-scan        Don't auto-scan for devices
        -c / --clean            Don't restore previous sessions on startup
 
-Of these, -D can be useful when PulseView gets stuck during the startup device scan. No such
-scan will be performed then, allowing the program to start up but you'll have to scan for your
-acquisition device(s) manually before you can use them then.
+Of these, -D / --dont-scan can be useful when PulseView gets stuck during the startup device scan.
+No such scan will be performed then, allowing the program to start up but you'll have to scan for
+your acquisition device(s) manually before you can use them.
 
-Another potentially useful option is -c, which can be used when PulseView doesn't start up and
-you don't know what could cause this.
+Another potentially useful option is -c / --clean, which can be used when PulseView doesn't start
+up and you don't know what could cause this.
 
 Thus, the combination of both parameters can be seen as some kind of "safe mode" for PulseView:
 
-       pulseview -D -c
+       pulseview -c -D