#include <QDialogButtonBox>
#include <QFormLayout>
#include <QGridLayout>
+#include <QLabel>
#include <QLineEdit>
+#include <QPushButton>
#include <QString>
+#include <QTabWidget>
+#include <QVBoxLayout>
#include "mathsignal.hpp"
#define MATHSIGNAL_INPUT_TIMEOUT (2000)
+const vector< pair<string, string> > MathEditDialog::Examples = {
+ {"Product of signals named A1 and A2:",
+ "A1 * A2"},
+ {"Create a sine wave with f=1MHz:",
+ "sin(1e6 * 2 * pi * t)"},
+ {"Average the past 4 samples of A2:",
+ "var v := 0;\n" \
+ "var n := 4;\n\n" \
+ "for (var i := 0; i < n; i += 1) {\n" \
+ "\tv += sample('A2', s - i) / n;\n" \
+ "}"},
+ {"Create a <a href=https://en.wikipedia.org/wiki/Chirp#Linear>frequency sweep</a> from 1Hz to 1MHz over 10 seconds:",
+ "var f_min := 1;\n" \
+ "var f_max := 1e6;\n" \
+ "var duration := 10;\n" \
+ "var gradient := (f_max - f_min) / duration;\n" \
+ "// phase is the antiderivative of (gradient * t + f_min) dt\n" \
+ "var phase := gradient * (t ^ 2 / 2) + f_min * t;\n" \
+ "sin(2 * pi * phase)"},
+ {"Single-pole low-pass IIR filter, see " \
+ "<a href=https://tomroelandts.com/articles/low-pass-single-pole-iir-filter>this</a> " \
+ "and <a href=https://dsp.stackexchange.com/questions/34969/cutoff-frequency-of-a-first-order-recursive-filter>this</a> article:",
+ "// -3db point is set to 10% of the sampling frequency\n" \
+ "var f_c := 0.1;\n" \
+ "var omega_c := 2 * pi * f_c;\n" \
+ "var b := 2 - cos(omega_c) - sqrt(((2 - cos(omega_c)) ^ 2) - 1);\n" \
+ "var a := 1 - b;\n\n" \
+ "// formula is y[n] = ax[n] + (1 - a) * y[n - 1]\n" \
+ "// x[n] becomes the input signal, here A4\n" \
+ "// y[n - 1] becomes sample('Math1', s - 1)\n" \
+ "a * A4 + (1 - a) * sample('Math1', s - 1)"}
+};
+
MathEditDialog::MathEditDialog(pv::Session &session,
shared_ptr<pv::data::MathSignal> math_signal, QWidget *parent) :
QDialog(parent),
session_(session),
math_signal_(math_signal),
- expression_(math_signal->get_expression()),
- old_expression_(math_signal->get_expression())
+ old_expression_(math_signal->get_expression()),
+ expr_edit_(new QPlainTextEdit())
{
setWindowTitle(tr("Math Expression Editor"));
+ // Create the pages
+ QWidget *basics_page = new QWidget();
+ QVBoxLayout *basics_layout = new QVBoxLayout(basics_page);
+ basics_layout->addWidget(new QLabel("<b>" + tr("Inputs:") + "</b>"));
+ basics_layout->addWidget(new QLabel("signal_name\tCurrent value of signal signal_name (e.g. A0 or CH1)"));
+ basics_layout->addWidget(new QLabel("T\t\tSampling interval (= 1 / sample rate)"));
+ basics_layout->addWidget(new QLabel("t\t\tCurrent time in seconds"));
+ basics_layout->addWidget(new QLabel("s\t\tCurrent sample number"));
+ basics_layout->addWidget(new QLabel("sample('s', n)\tValue of sample #n of the signal named s"));
+ basics_layout->addWidget(new QLabel("<b>" + tr("Variables:") + "</b>"));
+ basics_layout->addWidget(new QLabel("var x;\t\tCreate variable\nvar x := 5;\tCreate variable with initial value"));
+ basics_layout->addWidget(new QLabel("<b>" + tr("Basic operators:") + "</b>"));
+ basics_layout->addWidget(new QLabel("x + y\t\tAddition of x and y"));
+ basics_layout->addWidget(new QLabel("x - y\t\tSubtraction of x and y"));
+ basics_layout->addWidget(new QLabel("x * y\t\tMultiplication of x and y"));
+ basics_layout->addWidget(new QLabel("x / y\t\tDivision of x and y"));
+ basics_layout->addWidget(new QLabel("x % y\t\tRemainder of division x / y"));
+ basics_layout->addWidget(new QLabel("x ^ y\t\tx to the power of y"));
+ basics_layout->addWidget(new QLabel("<b>" + tr("Assignments:") + "</b>"));
+ basics_layout->addWidget(new QLabel("x := y\t\tAssign the value of y to x"));
+ basics_layout->addWidget(new QLabel("x += y\t\tIncrement x by y"));
+ basics_layout->addWidget(new QLabel("x -= y\t\tDecrement x by y"));
+ basics_layout->addWidget(new QLabel("x *= y\t\tMultiply x by y"));
+ basics_layout->addWidget(new QLabel("x /= y\t\tDivide x by y"));
+ basics_layout->addWidget(new QLabel("x %= y\t\tSet x to the value of x % y"));
+
+ QWidget *func1_page = new QWidget();
+ QVBoxLayout *func1_layout = new QVBoxLayout(func1_page);
+ func1_layout->addWidget(new QLabel("<b>" + tr("General purpose functions:") + "</b>"));
+ func1_layout->addWidget(new QLabel(tr("abs(x)\t\tAbsolute value of x")));
+ func1_layout->addWidget(new QLabel(tr("avg(x, y, ...)\tAverage of all input values")));
+ func1_layout->addWidget(new QLabel(tr("ceil(x)\t\tSmallest integer that is greater than or equal to x")));
+ func1_layout->addWidget(new QLabel(tr("clamp(lb, x, ub)\tClamp x in range between lb and ub, where lb < ub")));
+ func1_layout->addWidget(new QLabel(tr("equal(x, y)\tEquality test between x and y using normalised epsilon")));
+ func1_layout->addWidget(new QLabel(tr("erf(x)\t\tError function of x")));
+ func1_layout->addWidget(new QLabel(tr("erfc(x)\t\tComplimentary error function of x")));
+ func1_layout->addWidget(new QLabel(tr("exp(x)\t\te to the power of x")));
+ func1_layout->addWidget(new QLabel(tr("expm1(x)\te to the power of x minus 1, where x is very small.")));
+ func1_layout->addWidget(new QLabel(tr("floor(x)\t\tLargest integer that is less than or equal to x")));
+ func1_layout->addWidget(new QLabel(tr("frac(x)\t\tFractional portion of x")));
+ func1_layout->addWidget(new QLabel(tr("hypot(x)\t\tHypotenuse of x and y (i.e. sqrt(x*x + y*y))")));
+ func1_layout->addWidget(new QLabel(tr("iclamp(lb, x, ub)\tInverse-clamp x outside of the range lb and ub, where lb < ub.\n\t\tIf x is within the range it will snap to the closest bound")));
+ func1_layout->addWidget(new QLabel(tr("inrange(lb, x, ub)\tIn-range returns true when x is within the range lb and ub, where lb < ub.")));
+ func1_layout->addWidget(new QLabel(tr("log(x)\t\tNatural logarithm of x")));
+ func1_layout->addWidget(new QLabel(tr("log10(x)\t\tBase 10 logarithm of x")));
+
+ QWidget *func2_page = new QWidget();
+ QVBoxLayout *func2_layout = new QVBoxLayout(func2_page);
+ func2_layout->addWidget(new QLabel(tr("log1p(x)\t\tNatural logarithm of 1 + x, where x is very small")));
+ func2_layout->addWidget(new QLabel(tr("log2(x)\t\tBase 2 logarithm of x")));
+ func2_layout->addWidget(new QLabel(tr("logn(x)\t\tBase N logarithm of x, where n is a positive integer")));
+ func2_layout->addWidget(new QLabel(tr("max(x, y, ...)\tLargest value of all the inputs")));
+ func2_layout->addWidget(new QLabel(tr("min(x, y, ...)\tSmallest value of all the inputs")));
+ func2_layout->addWidget(new QLabel(tr("mul(x, y, ...)\tProduct of all the inputs")));
+ func2_layout->addWidget(new QLabel(tr("ncdf(x)\t\tNormal cumulative distribution function")));
+ func2_layout->addWidget(new QLabel(tr("nequal(x, y)\tNot-equal test between x and y using normalised epsilon")));
+ func2_layout->addWidget(new QLabel(tr("pow(x, y)\tx to the power of y")));
+ func2_layout->addWidget(new QLabel(tr("root(x, n)\tNth-Root of x, where n is a positive integer")));
+ func2_layout->addWidget(new QLabel(tr("round(x)\t\tRound x to the nearest integer")));
+ func2_layout->addWidget(new QLabel(tr("roundn(x, n)\tRound x to n decimal places, where n > 0 and is an integer")));
+ func2_layout->addWidget(new QLabel(tr("sgn(x)\t\tSign of x; -1 if x < 0, +1 if x > 0, else zero")));
+ func2_layout->addWidget(new QLabel(tr("sqrt(x)\t\tSquare root of x, where x >= 0")));
+ func2_layout->addWidget(new QLabel(tr("sum(x, y, ..,)\tSum of all the inputs")));
+ func2_layout->addWidget(new QLabel(tr("swap(x, y)\tSwap the values of the variables x and y and return the current value of y")));
+ func2_layout->addWidget(new QLabel(tr("trunc(x)\t\tInteger portion of x")));
+
+ QWidget *trig_page = new QWidget();
+ QVBoxLayout *trig_layout = new QVBoxLayout(trig_page);
+ trig_layout->addWidget(new QLabel("<b>" + tr("Trigonometry functions:") + "</b>"));
+ trig_layout->addWidget(new QLabel(tr("acos(x)\t\tArc cosine of x expressed in radians. Interval [-1,+1]")));
+ trig_layout->addWidget(new QLabel(tr("acosh(x)\t\tInverse hyperbolic cosine of x expressed in radians")));
+ trig_layout->addWidget(new QLabel(tr("asin(x)\t\tArc sine of x expressed in radians. Interval [-1,+1]")));
+ trig_layout->addWidget(new QLabel(tr("asinh(x)\t\tInverse hyperbolic sine of x expressed in radians")));
+ trig_layout->addWidget(new QLabel(tr("atan(x)\t\tArc tangent of x expressed in radians. Interval [-1,+1]")));
+ trig_layout->addWidget(new QLabel(tr("atan2(x, y)\tArc tangent of (x / y) expressed in radians. [-pi,+pi] ")));
+ trig_layout->addWidget(new QLabel(tr("atanh(x)\t\tInverse hyperbolic tangent of x expressed in radians")));
+ trig_layout->addWidget(new QLabel(tr("cos(x)\t\tCosine of x")));
+ trig_layout->addWidget(new QLabel(tr("cosh(x)\t\tHyperbolic cosine of x")));
+ trig_layout->addWidget(new QLabel(tr("cot(x)\t\tCotangent of x")));
+ trig_layout->addWidget(new QLabel(tr("csc(x)\t\tCosectant of x")));
+ trig_layout->addWidget(new QLabel(tr("sec(x)\t\tSecant of x")));
+ trig_layout->addWidget(new QLabel(tr("sin(x)\t\tSine of x")));
+ trig_layout->addWidget(new QLabel(tr("sinc(x)\t\tSine cardinal of x")));
+ trig_layout->addWidget(new QLabel(tr("sinh(x)\t\tHyperbolic sine of x")));
+ trig_layout->addWidget(new QLabel(tr("tan(x)\t\tTangent of x")));
+ trig_layout->addWidget(new QLabel(tr("tanh(x)\t\tHyperbolic tangent of x")));
+ trig_layout->addWidget(new QLabel(tr("deg2rad(x)\tConvert x from degrees to radians")));
+ trig_layout->addWidget(new QLabel(tr("deg2grad(x)\tConvert x from degrees to gradians")));
+ trig_layout->addWidget(new QLabel(tr("rad2deg(x)\tConvert x from radians to degrees")));
+ trig_layout->addWidget(new QLabel(tr("grad2deg(x)\tConvert x from gradians to degrees")));
+
+ QWidget *logic_page = new QWidget();
+ QVBoxLayout *logic_layout = new QVBoxLayout(logic_page);
+ logic_layout->addWidget(new QLabel("<b>" + tr("Logic operators:") + "</b>"));
+ logic_layout->addWidget(new QLabel("true\t\tTrue state or any value other than zero (typically 1)"));
+ logic_layout->addWidget(new QLabel("false\t\tFalse state, value of exactly zero"));
+ logic_layout->addWidget(new QLabel("x and y\t\tLogical AND, true only if x and y are both true"));
+ logic_layout->addWidget(new QLabel("mand(x, y, z, ...)\tMulti-input logical AND, true only if all inputs are true"));
+ logic_layout->addWidget(new QLabel("x or y\t\tLogical OR, true if either x or y is true"));
+ logic_layout->addWidget(new QLabel("mor(x, y, z, ...)\tMulti-input logical OR, true if at least one of the inputs is true"));
+ logic_layout->addWidget(new QLabel("x nand y\t\tLogical NAND, true only if either x or y is false"));
+ logic_layout->addWidget(new QLabel("x nor y\t\tLogical NOR, true only if the result of x or y is false"));
+ logic_layout->addWidget(new QLabel("not(x)\t\tLogical NOT, negate the logical sense of the input"));
+ logic_layout->addWidget(new QLabel("x xor y\t\tLogical NOR, true only if the logical states of x and y differ"));
+ logic_layout->addWidget(new QLabel("x xnor y\t\tLogical NOR, true only if x and y have the same state"));
+ logic_layout->addWidget(new QLabel("x & y\t\tSame as AND but with left to right expression short circuiting optimisation"));
+ logic_layout->addWidget(new QLabel("x | y\t\tSame as OR but with left to right expression short circuiting optimisation"));
+
+ QWidget *control1_page = new QWidget();
+ QVBoxLayout *control1_layout = new QVBoxLayout(control1_page);
+ control1_layout->addWidget(new QLabel("<b>" + tr("Comparisons:") + "</b>"));
+ control1_layout->addWidget(new QLabel(tr("x = y or x == y\tTrue only if x is strictly equal to y")));
+ control1_layout->addWidget(new QLabel(tr("x <> y or x != y\tTrue only if x does not equal y")));
+ control1_layout->addWidget(new QLabel(tr("x < y\t\tTrue only if x is less than y")));
+ control1_layout->addWidget(new QLabel(tr("x <= y\t\tTrue only if x is less than or equal to y")));
+ control1_layout->addWidget(new QLabel(tr("x > y\t\tTrue only if x is greater than y")));
+ control1_layout->addWidget(new QLabel(tr("x >= y\t\tTrue only if x is greater than or equal to y")));
+ control1_layout->addWidget(new QLabel("<b>" + tr("Flow control:") + "</b>"));
+ control1_layout->addWidget(new QLabel(tr("{ ... }\t\tBeginning and end of instruction block")));
+ control1_layout->addWidget(new QLabel(tr("if (x, y, z)\tIf x is true then return y else return z\nif (x) y;\t\t\tvariant without implied else\nif (x) { y };\t\tvariant with an instruction block\nif (x) y; else z;\t\tvariant with explicit else\nif (x) { y } else { z };\tvariant with instruction blocks")));
+ control1_layout->addWidget(new QLabel(tr("x ? y : z\tTernary operator, equivalent to 'if (x, y, z)'")));
+ control1_layout->addWidget(new QLabel(tr("switch {\t\tThe first true case condition that is encountered will\n case x > 1: a;\tdetermine the result of the switch. If none of the case\n case x < 1: b;\tconditions hold true, the default action is used\n default: c;\tto determine the return value\n}")));
+
+ QWidget *control2_page = new QWidget();
+ QVBoxLayout *control2_layout = new QVBoxLayout(control2_page);
+ control2_layout->addWidget(new QLabel(tr("while (conditon) {\tEvaluates expression repeatedly as long as condition is true,\n expression;\treturning the last value of expression\n}")));
+ control2_layout->addWidget(new QLabel(tr("repeat\t\tEvalues expression repeatedly as long as condition is false,\n expression;\treturning the last value of expression\nuntil (condition)\n")));
+ control2_layout->addWidget(new QLabel(tr("for (var x := 0; condition; x += 1) {\tRepeatedly evaluates expression while the condition is true,\n expression\t\t\twhile evaluating the 'increment' expression on each loop\n}")));
+ control2_layout->addWidget(new QLabel(tr("break\t\tTerminates the execution of the nearest enclosed loop, returning NaN")));
+ control2_layout->addWidget(new QLabel(tr("break[x]\t\tTerminates the execution of the nearest enclosed loop, returning x")));
+ control2_layout->addWidget(new QLabel(tr("continue\t\tInterrupts loop execution and resumes with the next loop iteration")));
+ control2_layout->addWidget(new QLabel(tr("return[x]\t\tReturns immediately from within the current expression, returning x")));
+ control2_layout->addWidget(new QLabel(tr("~(expr; expr; ...)\tEvaluates each sub-expression and returns the value of the last one\n~{expr; expr; ...}")));
+
+ QWidget *example_page = new QWidget();
+ QVBoxLayout *example_layout = new QVBoxLayout(example_page);
+ for (const pair<string, string> &entry : Examples) {
+ const string &desc = entry.first;
+ const string &example = entry.second;
+
+ QLabel *desc_label = new QLabel("<b>" + tr(desc.c_str()) + "</b>");
+ desc_label->setTextInteractionFlags(Qt::TextSelectableByMouse | Qt::LinksAccessibleByMouse | Qt::LinksAccessibleByKeyboard);
+ desc_label->setOpenExternalLinks(true);
+ example_layout->addWidget(desc_label);
+ QPushButton *btn = new QPushButton(tr("Copy to expression"));
+ connect(btn, &QPushButton::clicked, this, [&]() { set_expr(QString::fromStdString(example)); });
+ QGridLayout *gridlayout = new QGridLayout();
+ gridlayout->addWidget(new QLabel(QString::fromStdString(example)), 0, 0, Qt::AlignLeft);
+ gridlayout->addWidget(btn, 0, 1, Qt::AlignRight);
+ example_layout->addLayout(gridlayout);
+ }
+
// Create the rest of the dialog
QDialogButtonBox *button_box = new QDialogButtonBox(
QDialogButtonBox::Ok | QDialogButtonBox::Cancel);
- QVBoxLayout* root_layout = new QVBoxLayout(this);
-// root_layout->addLayout(tab_layout);
+ QTabWidget *tabs = new QTabWidget();
+ tabs->addTab(basics_page, tr("Basics"));
+ tabs->addTab(func1_page, tr("Functions 1"));
+ tabs->addTab(func2_page, tr("Functions 2"));
+ tabs->addTab(trig_page, tr("Trigonometry"));
+ tabs->addTab(logic_page, tr("Logic"));
+ tabs->addTab(control1_page, tr("Flow Control 1"));
+ tabs->addTab(control2_page, tr("Flow Control 2"));
+ tabs->addTab(example_page, tr("Examples"));
+
+ QVBoxLayout *root_layout = new QVBoxLayout(this);
+ root_layout->addWidget(tabs);
+ root_layout->addWidget(expr_edit_);
root_layout->addWidget(button_box);
+ // Set tab width to 4 characters
+ expr_edit_->setTabStopWidth(util::text_width(QFontMetrics(font()), "XXXX"));
+
connect(button_box, SIGNAL(accepted()), this, SLOT(accept()));
connect(button_box, SIGNAL(rejected()), this, SLOT(reject()));
}
+void MathEditDialog::set_expr(const QString &expr)
+{
+ expr_edit_->document()->setPlainText(expr);
+}
+
void MathEditDialog::accept()
{
- math_signal_->set_expression(expression_);
+ math_signal_->set_expression(expr_edit_->document()->toPlainText());
QDialog::accept();
}
void MathSignal::on_edit_clicked()
{
MathEditDialog dlg(session_, math_signal_);
+ dlg.set_expr(expression_edit_->text());
dlg.exec();
}
projects / pulseview.git / blobdiff