#include "logicsignal.hpp"
#include "view.hpp"
+#include "pv/util.hpp"
#include "pv/data/analog.hpp"
#include "pv/data/analogsegment.hpp"
#include "pv/data/logic.hpp"
using std::deque;
using std::div;
using std::div_t;
+// Note that "using std::isnan;" is _not_ put here since that would break
+// compilation on some platforms. Use "std::isnan()" instead in checks below.
using std::max;
using std::make_pair;
using std::min;
using std::shared_ptr;
using std::vector;
+using pv::data::LogicSegment;
using pv::data::SignalBase;
+using pv::util::SIPrefix;
namespace pv {
namespace views {
shared_ptr<data::SignalBase> base) :
Signal(session, base),
scale_index_(4), // 20 per div
- scale_index_drag_offset_(0),
pos_vdivs_(1),
neg_vdivs_(1),
resolution_(0),
display_type_(DisplayBoth),
- autoranging_(true)
+ autoranging_(true),
+ value_at_hover_pos_(std::numeric_limits<float>::quiet_NaN())
{
axis_pen_ = AxisPen;
update_scale();
}
-AnalogSignal::~AnalogSignal()
-{
- GlobalSettings::remove_change_handler(this);
-}
-
shared_ptr<pv::data::SignalData> AnalogSignal::data() const
{
return base_->analog_data();
return make_pair(-ph, nh);
}
-int AnalogSignal::scale_handle_offset() const
-{
- const int h = (pos_vdivs_ + neg_vdivs_) * div_height_;
-
- return ((scale_index_drag_offset_ - scale_index_) * h / 4) - h / 2;
-}
-
-void AnalogSignal::scale_handle_dragged(int offset)
-{
- const int h = (pos_vdivs_ + neg_vdivs_) * div_height_;
-
- scale_index_ = scale_index_drag_offset_ - (offset + h / 2) / (h / 4);
-
- update_scale();
-}
-
-void AnalogSignal::scale_handle_drag_release()
-{
- scale_index_drag_offset_ = scale_index_;
- update_scale();
-}
-
void AnalogSignal::on_setting_changed(const QString &key, const QVariant &value)
{
Signal::on_setting_changed(key, value);
(int64_t)0), last_sample);
if (samples_per_pixel < EnvelopeThreshold)
- paint_trace(p, segment, y, pp.left(),
- start_sample, end_sample,
+ paint_trace(p, segment, y, pp.left(), start_sample, end_sample,
pixels_offset, samples_per_pixel);
else
- paint_envelope(p, segment, y, pp.left(),
- start_sample, end_sample,
+ paint_envelope(p, segment, y, pp.left(), start_sample, end_sample,
pixels_offset, samples_per_pixel);
}
if ((display_type_ == DisplayAnalog) || (display_type_ == DisplayBoth)) {
const int y = get_visual_y();
- // Show the info section on the right side of the trace
- const QString infotext = QString("%1 V/div").arg(resolution_);
+ QString infotext;
+
+ // Show the info section on the right side of the trace, including
+ // the value at the hover point when the hover marker is enabled
+ // and we have corresponding data available
+ if (show_hover_marker_ && !std::isnan(value_at_hover_pos_)) {
+ infotext = QString("[%1] %2 V/div")
+ .arg(format_value_si(value_at_hover_pos_, SIPrefix::unspecified, 0, "V", false))
+ .arg(resolution_);
+ } else
+ infotext = QString("%1 V/div").arg(resolution_);
p.setPen(base_->color());
p.setFont(QApplication::font());
float *sample_block = new float[TracePaintBlockSize];
segment->get_samples(start, start + sample_count, sample_block);
+ if (show_hover_marker_)
+ reset_pixel_values();
+
const int w = 2;
for (int64_t sample = start; sample <= end; sample++, block_sample++) {
+ // Fetch next block of samples if we finished the current one
if (block_sample == TracePaintBlockSize) {
block_sample = 0;
sample_count = min(points_count - sample, TracePaintBlockSize);
segment->get_samples(sample, sample + sample_count, sample_block);
}
- const float x = left + (sample / samples_per_pixel - pixels_offset);
+ const float abs_x = sample / samples_per_pixel - pixels_offset;
+ const float x = left + abs_x;
*point++ = QPointF(x, y - sample_block[block_sample] * scale_);
+ // Generate the pixel<->value lookup table for the mouse hover
+ if (show_hover_marker_)
+ process_next_sample_value(abs_x, sample_block[block_sample]);
+
+ // Create the sampling points if needed
if (show_sampling_points) {
int idx = 0; // Neutral
{
using pv::data::AnalogSegment;
+ // Note: Envelope painting currently doesn't generate a pixel<->value lookup table
+ if (show_hover_marker_)
+ reset_pixel_values();
+
AnalogSegment::EnvelopeSection e;
segment->get_envelope_section(e, start, end, samples_per_pixel);
for (uint64_t sample = 0; sample < e.length - 1; sample++) {
const float x = ((e.scale * sample + e.start) /
samples_per_pixel - pixels_offset) + left;
- const AnalogSegment::EnvelopeSample *const s =
- e.samples + sample;
+
+ const AnalogSegment::EnvelopeSample *const s = e.samples + sample;
// We overlap this sample with the next so that vertical
// gaps do not appear during steep rising or falling edges
conv_threshold_cb_->blockSignals(false);
}
+vector<data::LogicSegment::EdgePair> AnalogSignal::get_nearest_level_changes(uint64_t sample_pos)
+{
+ assert(base_);
+ assert(owner_);
+
+ // Return if there's no logic data or we're showing only the analog trace
+ if (!base_->logic_data() || (display_type_ == DisplayAnalog))
+ return vector<data::LogicSegment::EdgePair>();
+
+ if (sample_pos == 0)
+ return vector<LogicSegment::EdgePair>();
+
+ shared_ptr<LogicSegment> segment = get_logic_segment_to_paint();
+ if (!segment || (segment->get_sample_count() == 0))
+ return vector<LogicSegment::EdgePair>();
+
+ const View *view = owner_->view();
+ assert(view);
+ const double samples_per_pixel = base_->get_samplerate() * view->scale();
+
+ vector<LogicSegment::EdgePair> edges;
+
+ segment->get_surrounding_edges(edges, sample_pos,
+ samples_per_pixel / LogicSignal::Oversampling, 0);
+
+ if (edges.empty())
+ return vector<LogicSegment::EdgePair>();
+
+ return edges;
+}
+
void AnalogSignal::perform_autoranging(bool keep_divs, bool force_update)
{
const deque< shared_ptr<pv::data::AnalogSegment> > &segments =
update_scale();
}
+void AnalogSignal::reset_pixel_values()
+{
+ value_at_pixel_pos_.clear();
+ current_pixel_pos_ = -1;
+ prev_value_at_pixel_ = std::numeric_limits<float>::quiet_NaN();
+}
+
+void AnalogSignal::process_next_sample_value(float x, float value)
+{
+ // Note: NAN is used to indicate the non-existance of a value at this pixel
+
+ if (std::isnan(prev_value_at_pixel_)) {
+ if (x < 0) {
+ min_value_at_pixel_ = value;
+ max_value_at_pixel_ = value;
+ prev_value_at_pixel_ = value;
+ current_pixel_pos_ = x;
+ } else
+ prev_value_at_pixel_ = std::numeric_limits<float>::quiet_NaN();
+ }
+
+ const int pixel_pos = (int)(x + 0.5);
+
+ if (pixel_pos > current_pixel_pos_) {
+ if (pixel_pos - current_pixel_pos_ == 1) {
+ if (std::isnan(prev_value_at_pixel_)) {
+ value_at_pixel_pos_.push_back(prev_value_at_pixel_);
+ } else {
+ // Average the min/max range to create one value for the previous pixel
+ const float avg = (min_value_at_pixel_ + max_value_at_pixel_) / 2;
+ value_at_pixel_pos_.push_back(avg);
+ }
+ } else {
+ // Interpolate values to create values for the intermediate pixels
+ const float start_value = prev_value_at_pixel_;
+ const float end_value = value;
+ const int steps = fabs(pixel_pos - current_pixel_pos_);
+ const double gradient = (end_value - start_value) / steps;
+ for (int i = 0; i < steps; i++) {
+ if (current_pixel_pos_ + i < 0)
+ continue;
+ value_at_pixel_pos_.push_back(start_value + i * gradient);
+ }
+ }
+
+ min_value_at_pixel_ = value;
+ max_value_at_pixel_ = value;
+ prev_value_at_pixel_ = value;
+ current_pixel_pos_ = pixel_pos;
+ } else {
+ // Another sample for the same pixel
+ if (value < min_value_at_pixel_)
+ min_value_at_pixel_ = value;
+ if (value > max_value_at_pixel_)
+ max_value_at_pixel_ = value;
+ }
+}
+
void AnalogSignal::populate_popup_form(QWidget *parent, QFormLayout *form)
{
// Add the standard options
connect(conv_threshold_cb_, SIGNAL(currentIndexChanged(int)),
this, SLOT(on_conv_threshold_changed(int)));
- connect(conv_threshold_cb_, SIGNAL(editTextChanged(const QString)),
+ connect(conv_threshold_cb_, SIGNAL(editTextChanged(const QString&)),
this, SLOT(on_conv_threshold_changed())); // index will be -1
// Add the display type dropdown
form->addRow(layout);
}
+void AnalogSignal::hover_point_changed(const QPoint &hp)
+{
+ Signal::hover_point_changed(hp);
+
+ // Note: Even though the view area begins at 0, we exclude 0 because
+ // that's also the value given when the cursor is over the header to the
+ // left of the trace paint area
+ if (hp.x() <= 0) {
+ value_at_hover_pos_ = std::numeric_limits<float>::quiet_NaN();
+ } else {
+ try {
+ value_at_hover_pos_ = value_at_pixel_pos_.at(hp.x());
+ } catch (out_of_range&) {
+ value_at_hover_pos_ = std::numeric_limits<float>::quiet_NaN();
+ }
+ }
+}
+
void AnalogSignal::on_min_max_changed(float min, float max)
{
(void)min;
projects / pulseview.git / blobdiff