* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#ifdef ENABLE_DECODE
#include <cmath>
#include <iostream>
#include <iterator>
-#include <mutex>
#include <unordered_set>
#include <boost/archive/text_iarchive.hpp>
#include <boost/archive/text_oarchive.hpp>
#include <boost/serialization/serialization.hpp>
-#include <boost/thread/locks.hpp>
#include <QApplication>
-#include <QHBoxLayout>
#include <QEvent>
#include <QFontMetrics>
#include <QMouseEvent>
#include <QScrollBar>
+#include <QVBoxLayout>
#include <libsigrokcxx/libsigrokcxx.hpp>
#include "view.hpp"
#include "viewport.hpp"
-#include "pv/session.hpp"
-#include "pv/devices/device.hpp"
#include "pv/data/logic.hpp"
#include "pv/data/logicsegment.hpp"
+#include "pv/devices/device.hpp"
+#include "pv/globalsettings.hpp"
+#include "pv/session.hpp"
#include "pv/util.hpp"
#ifdef ENABLE_DECODE
#include "decodetrace.hpp"
#endif
-using boost::shared_lock;
-using boost::shared_mutex;
-
using pv::data::SignalData;
using pv::data::Segment;
using pv::util::TimeUnit;
using std::back_inserter;
using std::copy_if;
-using std::deque;
+using std::count_if;
using std::dynamic_pointer_cast;
using std::inserter;
-using std::list;
-using std::lock_guard;
using std::max;
using std::make_pair;
using std::make_shared;
using std::set;
using std::set_difference;
using std::shared_ptr;
+using std::stringstream;
using std::unordered_map;
using std::unordered_set;
using std::vector;
-using std::weak_ptr;
namespace pv {
namespace views {
const Timestamp View::MinScale("1e-12");
const int View::MaxScrollValue = INT_MAX / 2;
-const int View::MaxViewAutoUpdateRate = 25; // No more than 25 Hz with sticky scrolling
const int View::ScaleUnits[3] = {1, 2, 5};
-CustomAbstractScrollArea::CustomAbstractScrollArea(QWidget *parent) :
+CustomScrollArea::CustomScrollArea(QWidget *parent) :
QAbstractScrollArea(parent)
{
}
-void CustomAbstractScrollArea::setViewportMargins(int left, int top, int right, int bottom)
-{
- QAbstractScrollArea::setViewportMargins(left, top, right, bottom);
-}
-
-bool CustomAbstractScrollArea::viewportEvent(QEvent *event)
+bool CustomScrollArea::viewportEvent(QEvent *event)
{
switch (event->type()) {
case QEvent::Paint:
}
}
-View::View(Session &session, QWidget *parent) :
- ViewBase(session, parent),
- viewport_(new Viewport(*this)),
- ruler_(new Ruler(*this)),
- header_(new Header(*this)),
- scrollarea_(this),
+View::View(Session &session, bool is_main_view, QWidget *parent) :
+ ViewBase(session, is_main_view, parent),
+ splitter_(new QSplitter()),
scale_(1e-3),
offset_(0),
updating_scroll_(false),
cursors_(new CursorPair(*this)),
next_flag_text_('A'),
trigger_markers_(),
- hover_point_(-1, -1)
-{
- connect(scrollarea_.horizontalScrollBar(), SIGNAL(valueChanged(int)),
+ hover_point_(-1, -1),
+ scroll_needs_defaults_(false),
+ saved_v_offset_(0)
+{
+ QVBoxLayout *root_layout = new QVBoxLayout(this);
+ root_layout->setContentsMargins(0, 0, 0, 0);
+ root_layout->addWidget(splitter_);
+
+ viewport_ = new Viewport(*this);
+ scrollarea_ = new CustomScrollArea(splitter_);
+ scrollarea_->setViewport(viewport_);
+ scrollarea_->setFrameShape(QFrame::NoFrame);
+
+ ruler_ = new Ruler(*this);
+
+ header_ = new Header(*this);
+ header_->setMinimumWidth(10); // So that the arrow tips show at least
+
+ // We put the header into a simple layout so that we can add the top margin,
+ // allowing us to make it line up with the bottom of the ruler
+ QWidget *header_container = new QWidget();
+ header_container->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Expanding);
+ QVBoxLayout *header_layout = new QVBoxLayout(header_container);
+ header_layout->setContentsMargins(0, ruler_->sizeHint().height(), 0, 0);
+ header_layout->addWidget(header_);
+
+ // To let the ruler and scrollarea be on the same split pane, we need a layout
+ QWidget *trace_container = new QWidget();
+ trace_container->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Expanding);
+ QVBoxLayout *trace_layout = new QVBoxLayout(trace_container);
+ trace_layout->setSpacing(0); // We don't want space between the ruler and scrollarea
+ trace_layout->setContentsMargins(0, 0, 0, 0);
+ trace_layout->addWidget(ruler_);
+ trace_layout->addWidget(scrollarea_);
+
+ splitter_->addWidget(header_container);
+ splitter_->addWidget(trace_container);
+ splitter_->setHandleWidth(1); // Don't show a visible rubber band
+ splitter_->setCollapsible(0, false); // Prevent the header from collapsing
+ splitter_->setCollapsible(1, false); // Prevent the traces from collapsing
+ splitter_->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Expanding);
+
+ viewport_->installEventFilter(this);
+ ruler_->installEventFilter(this);
+ header_->installEventFilter(this);
+
+ // Set up settings and event handlers
+ GlobalSettings settings;
+ coloured_bg_ = settings.value(GlobalSettings::Key_View_ColouredBG).toBool();
+
+ connect(scrollarea_->horizontalScrollBar(), SIGNAL(valueChanged(int)),
this, SLOT(h_scroll_value_changed(int)));
- connect(scrollarea_.verticalScrollBar(), SIGNAL(valueChanged(int)),
+ connect(scrollarea_->verticalScrollBar(), SIGNAL(valueChanged(int)),
this, SLOT(v_scroll_value_changed()));
connect(header_, SIGNAL(selection_changed()),
this, SLOT(process_sticky_events()));
lazy_event_handler_.setSingleShot(true);
- connect(&delayed_view_updater_, SIGNAL(timeout()),
- this, SLOT(perform_delayed_view_update()));
- delayed_view_updater_.setSingleShot(true);
- delayed_view_updater_.setInterval(1000 / MaxViewAutoUpdateRate);
-
- /* To let the scroll area fill up the parent QWidget (this), we need a layout */
- QHBoxLayout *layout = new QHBoxLayout(this);
- setLayout(layout);
- layout->setContentsMargins(0, 0, 0, 0);
- layout->addWidget(&scrollarea_);
-
- scrollarea_.setViewport(viewport_);
-
- viewport_->installEventFilter(this);
- ruler_->installEventFilter(this);
- header_->installEventFilter(this);
-
// Trigger the initial event manually. The default device has signals
// which were created before this object came into being
signals_changed();
return session_;
}
-std::unordered_set< std::shared_ptr<Signal> > View::signals() const
+unordered_set< shared_ptr<Signal> > View::signals() const
{
return signals_;
}
void View::clear_signals()
{
+ ViewBase::clear_signalbases();
signals_.clear();
}
void View::add_signal(const shared_ptr<Signal> signal)
{
+ ViewBase::add_signalbase(signal->base());
signals_.insert(signal);
}
void View::save_settings(QSettings &settings) const
{
settings.setValue("scale", scale_);
+ settings.setValue("v_offset",
+ scrollarea_->verticalScrollBar()->sliderPosition());
- std::stringstream ss;
+ stringstream ss;
boost::archive::text_oarchive oa(ss);
oa << boost::serialization::make_nvp("offset", offset_);
settings.setValue("offset", QString::fromStdString(ss.str()));
void View::restore_settings(QSettings &settings)
{
+ // Note: It is assumed that this function is only called once,
+ // immediately after restoring a previous session.
+
if (settings.contains("scale"))
set_scale(settings.value("scale").toDouble());
if (settings.contains("offset")) {
util::Timestamp offset;
- std::stringstream ss;
+ stringstream ss;
ss << settings.value("offset").toString().toStdString();
boost::archive::text_iarchive ia(ss);
signal->restore_settings(settings);
settings.endGroup();
}
+
+ if (settings.contains("v_offset")) {
+ saved_v_offset_ = settings.value("v_offset").toInt();
+ set_v_offset(saved_v_offset_);
+ scroll_needs_defaults_ = false;
+ // Note: see eventFilter() for additional information
+ }
}
vector< shared_ptr<TimeItem> > View::time_items() const
int View::owner_visual_v_offset() const
{
- return -scrollarea_.verticalScrollBar()->sliderPosition();
+ return -scrollarea_->verticalScrollBar()->sliderPosition();
}
void View::set_v_offset(int offset)
{
- scrollarea_.verticalScrollBar()->setSliderPosition(offset);
+ scrollarea_->verticalScrollBar()->setSliderPosition(offset);
header_->update();
viewport_->update();
}
void View::zoom(double steps, int offset)
{
- set_zoom(scale_ * pow(3.0/2.0, -steps), offset);
+ set_zoom(scale_ * pow(3.0 / 2.0, -steps), offset);
}
void View::zoom_fit(bool gui_state)
boost::optional<Timestamp> left_time, right_time;
const set< shared_ptr<SignalData> > visible_data = get_visible_data();
for (const shared_ptr<SignalData> d : visible_data) {
- const vector< shared_ptr<Segment> > segments =
- d->segments();
+ const vector< shared_ptr<Segment> > segments = d->segments();
for (const shared_ptr<Segment> &s : segments) {
double samplerate = s->samplerate();
samplerate = (samplerate <= 0.0) ? 1.0 : samplerate;
return make_pair(*left_time, *right_time);
}
-void View::enable_sticky_scrolling(bool state)
+void View::enable_show_sampling_points(bool state)
{
- sticky_scrolling_ = state;
+ (void)state;
+
+ viewport_->update();
}
-void View::enable_coloured_bg(bool state)
+void View::enable_show_analog_minor_grid(bool state)
{
- const vector<shared_ptr<TraceTreeItem>> items(
- list_by_type<TraceTreeItem>());
-
- for (shared_ptr<TraceTreeItem> i : items) {
- // Can't cast to Trace because it's abstract, so we need to
- // check for any derived classes individually
-
- shared_ptr<AnalogSignal> a = dynamic_pointer_cast<AnalogSignal>(i);
- if (a)
- a->set_coloured_bg(state);
-
- shared_ptr<LogicSignal> l = dynamic_pointer_cast<LogicSignal>(i);
- if (l)
- l->set_coloured_bg(state);
+ (void)state;
-#ifdef ENABLE_DECODE
- shared_ptr<DecodeTrace> d = dynamic_pointer_cast<DecodeTrace>(i);
- if (d)
- d->set_coloured_bg(state);
-#endif
- }
+ viewport_->update();
+}
+void View::enable_coloured_bg(bool state)
+{
+ coloured_bg_ = state;
viewport_->update();
}
+bool View::coloured_bg() const
+{
+ return coloured_bg_;
+}
+
bool View::cursors_shown() const
{
return show_cursors_;
viewport_->update();
}
-std::shared_ptr<CursorPair> View::cursors() const
+shared_ptr<CursorPair> View::cursors() const
{
return cursors_;
}
void View::add_flag(const Timestamp& time)
{
- flags_.push_back(shared_ptr<Flag>(new Flag(*this, time,
- QString("%1").arg(next_flag_text_))));
+ flags_.push_back(make_shared<Flag>(*this, time,
+ QString("%1").arg(next_flag_text_)));
next_flag_text_ = (next_flag_text_ >= 'Z') ? 'A' :
(next_flag_text_ + 1);
time_item_appearance_changed(true, true);
}
-void View::remove_flag(std::shared_ptr<Flag> flag)
+void View::remove_flag(shared_ptr<Flag> flag)
{
flags_.remove(flag);
time_item_appearance_changed(true, true);
}
-vector< std::shared_ptr<Flag> > View::flags() const
+vector< shared_ptr<Flag> > View::flags() const
{
- vector< std::shared_ptr<Flag> > flags(flags_.begin(), flags_.end());
+ vector< shared_ptr<Flag> > flags(flags_.begin(), flags_.end());
stable_sort(flags.begin(), flags.end(),
[](const shared_ptr<Flag> &a, const shared_ptr<Flag> &b) {
return a->time() < b->time();
for (auto &o : sorted_owners)
o->restack_items();
- // Re-assign background colors
- bool next_bgcolour_state = 0;
-
- for (auto &o : sorted_owners)
- next_bgcolour_state = o->reassign_bgcolour_states(next_bgcolour_state);
-
// Animate the items to their destination
for (const auto &i : items)
i->animate_to_layout_v_offset();
void View::trigger_event(util::Timestamp location)
{
- trigger_markers_.push_back(shared_ptr<TriggerMarker>(
- new TriggerMarker(*this, location)));
+ trigger_markers_.push_back(make_shared<TriggerMarker>(*this, location));
}
void View::get_scroll_layout(double &length, Timestamp &offset) const
// Precision is the number of fractional digits required, not
// taking the prefix into account (and it must never be negative)
- tick_precision = std::max(ceil(log10(1 / tick_period)).convert_to<int>(), 0);
+ tick_precision = max(ceil(log10(1 / tick_period)).convert_to<int>(), 0);
tick_period_width = (tick_period / scale_).convert_to<double>();
set_tick_precision(tick_precision);
}
+void View::adjust_top_margin()
+{
+ assert(viewport_);
+
+ const QSize areaSize = viewport_->size();
+
+ const pair<int, int> extents = v_extents();
+ const int top_margin = owner_visual_v_offset() + extents.first;
+ const int trace_bottom = owner_visual_v_offset() + extents.first + extents.second;
+
+ // Do we have empty space at the top while the last trace goes out of screen?
+ if ((top_margin > 0) && (trace_bottom > areaSize.height())) {
+ const int trace_height = extents.second - extents.first;
+
+ // Center everything vertically if there is enough space
+ if (areaSize.height() >= trace_height)
+ set_v_offset(extents.first -
+ ((areaSize.height() - trace_height) / 2));
+ else
+ // Remove the top margin to make as many traces fit on screen as possible
+ set_v_offset(extents.first);
+ }
+}
+
void View::update_scroll()
{
assert(viewport_);
- QScrollBar *hscrollbar = scrollarea_.horizontalScrollBar();
- QScrollBar *vscrollbar = scrollarea_.verticalScrollBar();
+ QScrollBar *hscrollbar = scrollarea_->horizontalScrollBar();
+ QScrollBar *vscrollbar = scrollarea_->verticalScrollBar();
const QSize areaSize = viewport_->size();
vscrollbar->setRange(extents.first - areaSize.height(),
extents.second);
- if (scroll_needs_defaults)
+ if (scroll_needs_defaults_)
set_scroll_default();
}
void View::reset_scroll()
{
- scrollarea_.verticalScrollBar()->setRange(0, 0);
+ scrollarea_->verticalScrollBar()->setRange(0, 0);
}
void View::set_scroll_default()
const QSize areaSize = viewport_->size();
- // Special case: when starting up and the window isn't visible yet,
- // areaSize is [0, 0]. In this case we want to be called again later
- if (areaSize.height() == 0) {
- scroll_needs_defaults = true;
- return;
- } else {
- scroll_needs_defaults = false;
- }
-
const pair<int, int> extents = v_extents();
const int trace_height = extents.second - extents.first;
set_v_offset(extents.first);
}
+bool View::header_fully_visible() const
+{
+ const int header_pane_width = splitter_->sizes().front();
+ const int header_width = header_->extended_size_hint().width();
+
+ return (header_pane_width >= header_width);
+}
+
void View::update_layout()
{
- scrollarea_.setViewportMargins(
- header_->sizeHint().width() - Header::BaselineOffset,
- ruler_->sizeHint().height(), 0, 0);
- ruler_->setGeometry(viewport_->x(), 0,
- viewport_->width(), ruler_->extended_size_hint().height());
- header_->setGeometry(0, viewport_->y(),
- header_->extended_size_hint().width(), viewport_->height());
+ // Only adjust pane sizes if the header hasn't been partially hidden by the user
+ if (header_fully_visible()) {
+ int splitter_area_width = 0;
+ for (int w : splitter_->sizes())
+ splitter_area_width += w;
+
+ // Make sure the header has enough horizontal space to show all labels fully
+ QList<int> pane_sizes;
+ pane_sizes.push_back(header_->extended_size_hint().width());
+ pane_sizes.push_back(splitter_area_width - header_->extended_size_hint().width());
+ splitter_->setSizes(pane_sizes);
+ }
+
update_scroll();
}
size_t max_prevalence = 0;
TraceTreeItemOwner *prevalent_owner = nullptr;
for (TraceTreeItemOwner *owner : owners) {
- const size_t prevalence = std::count_if(
+ const size_t prevalence = count_if(
owner_list.begin(), owner_list.end(),
[&](TraceTreeItemOwner *o) { return o == owner; });
if (prevalence > max_prevalence) {
} else if (type == QEvent::Leave) {
hover_point_ = QPoint(-1, -1);
hover_point_changed();
+ } else if (type == QEvent::Show) {
+
+ // This is somewhat of a hack, unfortunately. We cannot use
+ // set_v_offset() from within restore_settings() as the view
+ // at that point is neither visible nor properly sized.
+ // This is the least intrusive workaround I could come up
+ // with: set the vertical offset (or scroll defaults) when
+ // the view is shown, which happens after all widgets were
+ // resized to their final sizes.
+ update_layout();
+
+ if (scroll_needs_defaults_) {
+ set_scroll_default();
+ scroll_needs_defaults_ = false;
+ }
+
+ if (saved_v_offset_) {
+ set_v_offset(saved_v_offset_);
+ saved_v_offset_ = 0;
+ }
}
return QObject::eventFilter(object, event);
}
-void View::resizeEvent(QResizeEvent*)
+void View::resizeEvent(QResizeEvent* event)
{
+ // Only adjust the top margin if we shrunk vertically
+ if (event->size().height() < event->oldSize().height())
+ adjust_top_margin();
+
update_layout();
}
sticky_events_ |=
(horz ? TraceTreeItemHExtentsChanged : 0) |
(vert ? TraceTreeItemVExtentsChanged : 0);
+
lazy_event_handler_.start();
}
sticky_scrolling_changed(false);
}
- const int range = scrollarea_.horizontalScrollBar()->maximum();
+ const int range = scrollarea_->horizontalScrollBar()->maximum();
if (range < MaxScrollValue)
set_offset(scale_ * value);
else {
// Do we need to set the vertical scrollbar to its default position later?
// We do if there are no traces, i.e. the scroll bar has no range set
bool reset_scrollbar =
- (scrollarea_.verticalScrollBar()->minimum() ==
- scrollarea_.verticalScrollBar()->maximum());
+ (scrollarea_->verticalScrollBar()->minimum() ==
+ scrollarea_->verticalScrollBar()->maximum());
if (!session_.device()) {
reset_scroll();
}
// Add and position the pending top levels items
+ int offset = v_extents().second;
for (auto item : new_top_level_items) {
add_child_item(item);
// Position the item after the last item or at the top if there is none
- int offset = v_extents().second;
const pair<int, int> extents = item->v_extents();
if (item->enabled())
set_time_unit(util::TimeUnit::Samples);
trigger_markers_.clear();
+
+ // Activate "always zoom to fit" if the setting is enabled and we're
+ // the main view of this session (other trace views may be used for
+ // zooming and we don't want to mess them up)
+ GlobalSettings settings;
+ bool state = settings.value(GlobalSettings::Key_View_AlwaysZoomToFit).toBool();
+ if (is_main_view_ && state) {
+ always_zoom_to_fit_ = true;
+ always_zoom_to_fit_changed(always_zoom_to_fit_);
+ }
+
+ // Enable sticky scrolling if the setting is enabled
+ sticky_scrolling_ = settings.value(GlobalSettings::Key_View_StickyScrolling).toBool();
}
if (state == Session::Stopped) {
// Reset "always zoom to fit", the acquisition has stopped
if (always_zoom_to_fit_) {
+ // Perform a final zoom-to-fit before disabling
+ zoom_fit(always_zoom_to_fit_);
always_zoom_to_fit_ = false;
- always_zoom_to_fit_changed(false);
+ always_zoom_to_fit_changed(always_zoom_to_fit_);
}
}
}
-void View::data_updated()
-{
- if (always_zoom_to_fit_ || sticky_scrolling_) {
- if (!delayed_view_updater_.isActive())
- delayed_view_updater_.start();
- } else {
- determine_time_unit();
- update_scroll();
- ruler_->update();
- viewport_->update();
- }
-}
-
void View::perform_delayed_view_update()
{
- if (always_zoom_to_fit_)
+ if (always_zoom_to_fit_) {
zoom_fit(true);
-
- if (sticky_scrolling_) {
+ } else if (sticky_scrolling_) {
// Make right side of the view sticky
double length = 0;
Timestamp offset;
projects / pulseview.git / blobdiff