* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include <extdef.h>
#include <limits>
#include <QApplication>
+#include <QCheckBox>
#include <QComboBox>
#include <QFormLayout>
#include <QGridLayout>
#include "analogsignal.hpp"
#include "pv/data/analog.hpp"
#include "pv/data/analogsegment.hpp"
+#include "pv/data/signalbase.hpp"
#include "pv/view/view.hpp"
+#include "pv/globalsettings.hpp"
#include <libsigrokcxx/libsigrokcxx.hpp>
using std::shared_ptr;
using std::deque;
-using sigrok::Channel;
-
namespace pv {
-namespace view {
+namespace views {
+namespace TraceView {
const QColor AnalogSignal::SignalColours[4] = {
QColor(0xC4, 0xA0, 0x00), // Yellow
const QColor AnalogSignal::GridMajorColor = QColor(0, 0, 0, 40*256/100);
const QColor AnalogSignal::GridMinorColor = QColor(0, 0, 0, 20*256/100);
+const QColor AnalogSignal::SamplingPointColour(0x77, 0x77, 0x77);
+
const float AnalogSignal::EnvelopeThreshold = 256.0f;
const int AnalogSignal::MaximumVDivs = 10;
AnalogSignal::AnalogSignal(
pv::Session &session,
- shared_ptr<Channel> channel,
- shared_ptr<data::Analog> data) :
- Signal(session, channel),
- data_(data),
+ shared_ptr<data::SignalBase> base) :
+ Signal(session, base),
scale_index_(4), // 20 per div
scale_index_drag_offset_(0),
div_height_(3 * QFontMetrics(QApplication::font()).height()),
- vdivs_(1),
- resolution_(0)
+ pos_vdivs_(1),
+ neg_vdivs_(1),
+ resolution_(0),
+ autoranging_(true)
{
- set_colour(SignalColours[channel_->index() % countof(SignalColours)]);
+ pv::data::Analog* analog_data =
+ dynamic_cast<pv::data::Analog*>(data().get());
+
+ connect(analog_data, SIGNAL(samples_added(QObject*, uint64_t, uint64_t)),
+ this, SLOT(on_samples_added()));
+
+ base_->set_colour(SignalColours[base_->index() % countof(SignalColours)]);
update_scale();
}
shared_ptr<pv::data::SignalData> AnalogSignal::data() const
{
- return data_;
+ return base_->analog_data();
}
-shared_ptr<pv::data::Analog> AnalogSignal::analog_data() const
+void AnalogSignal::save_settings(QSettings &settings) const
{
- return data_;
+ settings.setValue("pos_vdivs", pos_vdivs_);
+ settings.setValue("neg_vdivs", neg_vdivs_);
+ settings.setValue("scale_index", scale_index_);
+ settings.setValue("autoranging", autoranging_);
+}
+
+void AnalogSignal::restore_settings(QSettings &settings)
+{
+ if (settings.contains("pos_vdivs"))
+ pos_vdivs_ = settings.value("pos_vdivs").toInt();
+
+ if (settings.contains("neg_vdivs"))
+ neg_vdivs_ = settings.value("neg_vdivs").toInt();
+
+ if (settings.contains("scale_index")) {
+ scale_index_ = settings.value("scale_index").toInt();
+ update_scale();
+ }
+
+ if (settings.contains("autoranging"))
+ autoranging_ = settings.value("autoranging").toBool();
}
std::pair<int, int> AnalogSignal::v_extents() const
{
- const int h = vdivs_ * div_height_;
- return make_pair(-h, h);
+ const int ph = pos_vdivs_ * div_height_;
+ const int nh = neg_vdivs_ * div_height_;
+ return make_pair(-ph, nh);
}
int AnalogSignal::scale_handle_offset() const
{
- const int h = vdivs_ * div_height_;
+ const int h = (pos_vdivs_ + neg_vdivs_) * div_height_;
return ((scale_index_drag_offset_ - scale_index_) *
h / 4) - h / 2;
void AnalogSignal::scale_handle_dragged(int offset)
{
- const int h = vdivs_ * div_height_;
+ const int h = (pos_vdivs_ + neg_vdivs_) * div_height_;
scale_index_ = scale_index_drag_offset_ -
(offset + h / 2) / (h / 4);
void AnalogSignal::paint_back(QPainter &p, const ViewItemPaintParams &pp)
{
- if (channel_->enabled()) {
+ if (base_->enabled()) {
Trace::paint_back(p, pp);
paint_axis(p, pp, get_visual_y());
}
void AnalogSignal::paint_mid(QPainter &p, const ViewItemPaintParams &pp)
{
- assert(data_);
+ assert(base_->analog_data());
assert(owner_);
const int y = get_visual_y();
- if (!channel_->enabled())
+ if (!base_->enabled())
return;
paint_grid(p, y, pp.left(), pp.right());
const deque< shared_ptr<pv::data::AnalogSegment> > &segments =
- data_->analog_segments();
+ base_->analog_data()->analog_segments();
if (segments.empty())
return;
// Show the info section on the right side of the trace
const QString infotext = QString("%1 V/div").arg(resolution_);
- p.setPen(colour_);
+ p.setPen(base_->colour());
p.setFont(QApplication::font());
const QRectF bounding_rect = QRectF(pp.left(),
{
p.setRenderHint(QPainter::Antialiasing, false);
- p.setPen(QPen(GridMajorColor, 1, Qt::DashLine));
- for (int i = 1; i <= vdivs_; i++) {
- const float dy = i * div_height_;
- p.drawLine(QLineF(left, y - dy, right, y - dy));
- p.drawLine(QLineF(left, y + dy, right, y + dy));
+ if (pos_vdivs_ > 0) {
+ p.setPen(QPen(GridMajorColor, 1, Qt::DashLine));
+ for (int i = 1; i <= pos_vdivs_; i++) {
+ const float dy = i * div_height_;
+ p.drawLine(QLineF(left, y - dy, right, y - dy));
+ }
+
+ p.setPen(QPen(GridMinorColor, 1, Qt::DashLine));
+ for (int i = 0; i < pos_vdivs_; i++) {
+ const float dy = i * div_height_;
+ const float dy25 = dy + (0.25 * div_height_);
+ const float dy50 = dy + (0.50 * div_height_);
+ const float dy75 = dy + (0.75 * div_height_);
+ p.drawLine(QLineF(left, y - dy25, right, y - dy25));
+ p.drawLine(QLineF(left, y - dy50, right, y - dy50));
+ p.drawLine(QLineF(left, y - dy75, right, y - dy75));
+ }
}
- p.setPen(QPen(GridMinorColor, 1, Qt::DashLine));
- for (int i = 0; i < vdivs_; i++) {
- const float dy = i * div_height_;
- const float dy25 = dy + (0.25 * div_height_);
- const float dy50 = dy + (0.50 * div_height_);
- const float dy75 = dy + (0.75 * div_height_);
- p.drawLine(QLineF(left, y - dy25, right, y - dy25));
- p.drawLine(QLineF(left, y + dy25, right, y + dy25));
- p.drawLine(QLineF(left, y - dy50, right, y - dy50));
- p.drawLine(QLineF(left, y + dy50, right, y + dy50));
- p.drawLine(QLineF(left, y - dy75, right, y - dy75));
- p.drawLine(QLineF(left, y + dy75, right, y + dy75));
+ if (neg_vdivs_ > 0) {
+ p.setPen(QPen(GridMajorColor, 1, Qt::DashLine));
+ for (int i = 1; i <= neg_vdivs_; i++) {
+ const float dy = i * div_height_;
+ p.drawLine(QLineF(left, y + dy, right, y + dy));
+ }
+
+ p.setPen(QPen(GridMinorColor, 1, Qt::DashLine));
+ for (int i = 0; i < neg_vdivs_; i++) {
+ const float dy = i * div_height_;
+ const float dy25 = dy + (0.25 * div_height_);
+ const float dy50 = dy + (0.50 * div_height_);
+ const float dy75 = dy + (0.75 * div_height_);
+ p.drawLine(QLineF(left, y + dy25, right, y + dy25));
+ p.drawLine(QLineF(left, y + dy50, right, y + dy50));
+ p.drawLine(QLineF(left, y + dy75, right, y + dy75));
+ }
}
p.setRenderHint(QPainter::Antialiasing, true);
int y, int left, const int64_t start, const int64_t end,
const double pixels_offset, const double samples_per_pixel)
{
- const int64_t sample_count = end - start;
-
- const float *const samples = segment->get_samples(start, end);
- assert(samples);
+ p.setPen(base_->colour());
- p.setPen(colour_);
+ const int64_t points_count = end - start;
- QPointF *points = new QPointF[sample_count];
+ QPointF *points = new QPointF[points_count];
QPointF *point = points;
+ QRectF *const sampling_points = new QRectF[points_count];
+ QRectF *sampling_point = sampling_points;
+
+ pv::data::SegmentAnalogDataIterator* it =
+ segment->begin_sample_iteration(start);
+
+ const int w = 2;
for (int64_t sample = start; sample != end; sample++) {
const float x = (sample / samples_per_pixel -
pixels_offset) + left;
- *point++ = QPointF(x,
- y - samples[sample - start] * scale_);
+
+ *point++ = QPointF(x, y - *((float*)it->value) * scale_);
+ *sampling_point++ = QRectF(x - (w / 2), y - *((float*)it->value) * scale_ - (w / 2), w, w);
+
+ segment->continue_sample_iteration(it, 1);
}
+ segment->end_sample_iteration(it);
- p.drawPolyline(points, point - points);
+ p.drawPolyline(points, points_count);
+
+ // Paint the sampling points if enabled
+ GlobalSettings settings;
+ const bool show_sampling_points =
+ settings.value(GlobalSettings::Key_View_ShowSamplingPoints).toBool();
+ if (show_sampling_points) {
+ p.setPen(SamplingPointColour);
+ p.drawRects(sampling_points, points_count);
+ }
- delete[] samples;
delete[] points;
+ delete[] sampling_points;
}
void AnalogSignal::paint_envelope(QPainter &p,
return;
p.setPen(QPen(Qt::NoPen));
- p.setBrush(colour_);
+ p.setBrush(base_->colour());
QRectF *const rects = new QRectF[e.length];
QRectF *rect = rects;
scale_ = div_height_ / resolution_;
}
+void AnalogSignal::perform_autoranging(bool force_update)
+{
+ const deque< shared_ptr<pv::data::AnalogSegment> > &segments =
+ base_->analog_data()->analog_segments();
+
+ if (segments.empty())
+ return;
+
+ static double prev_min = 0, prev_max = 0;
+ double min = 0, max = 0;
+
+ for (shared_ptr<pv::data::AnalogSegment> segment : segments) {
+ std::pair<double, double> mm = segment->get_min_max();
+ min = std::min(min, mm.first);
+ max = std::max(max, mm.second);
+ }
+
+ if ((min == prev_min) && (max == prev_max) && !force_update)
+ return;
+
+ prev_min = min;
+ prev_max = max;
+
+ // Use all divs for the positive range if there are no negative values
+ if ((min == 0) && (neg_vdivs_ > 0)) {
+ pos_vdivs_ += neg_vdivs_;
+ neg_vdivs_ = 0;
+ }
+
+ // Split up the divs if there are negative values but no negative divs
+ if ((min < 0) && (neg_vdivs_ == 0)) {
+ neg_vdivs_ = pos_vdivs_ / 2;
+ pos_vdivs_ -= neg_vdivs_;
+ }
+
+ double min_value_per_div;
+ if ((pos_vdivs_ > 0) && (neg_vdivs_ > 0))
+ min_value_per_div = std::max(max / pos_vdivs_, -min / neg_vdivs_);
+ else if (pos_vdivs_ > 0)
+ min_value_per_div = max / pos_vdivs_;
+ else
+ min_value_per_div = -min / neg_vdivs_;
+
+ // Find first scale value that is bigger than the value we need
+ for (int i = MinScaleIndex; i < MaxScaleIndex; i++)
+ if (get_resolution(i) > min_value_per_div) {
+ scale_index_ = i;
+ break;
+ }
+
+ update_scale();
+}
+
void AnalogSignal::populate_popup_form(QWidget *parent, QFormLayout *form)
{
// Add the standard options
QFormLayout *const layout = new QFormLayout;
// Add the number of vdivs
- QSpinBox *vdiv_sb = new QSpinBox(parent);
- vdiv_sb->setRange(1, MaximumVDivs);
- vdiv_sb->setValue(vdivs_);
- connect(vdiv_sb, SIGNAL(valueChanged(int)),
- this, SLOT(on_vdivs_changed(int)));
- layout->addRow(tr("Number of vertical divs"), vdiv_sb);
+ QSpinBox *pvdiv_sb = new QSpinBox(parent);
+ pvdiv_sb->setRange(0, MaximumVDivs);
+ pvdiv_sb->setValue(pos_vdivs_);
+ connect(pvdiv_sb, SIGNAL(valueChanged(int)),
+ this, SLOT(on_pos_vdivs_changed(int)));
+ layout->addRow(tr("Number of pos vertical divs"), pvdiv_sb);
+
+ QSpinBox *nvdiv_sb = new QSpinBox(parent);
+ nvdiv_sb->setRange(0, MaximumVDivs);
+ nvdiv_sb->setValue(neg_vdivs_);
+ connect(nvdiv_sb, SIGNAL(valueChanged(int)),
+ this, SLOT(on_neg_vdivs_changed(int)));
+ layout->addRow(tr("Number of neg vertical divs"), nvdiv_sb);
// Add the vertical resolution
resolution_cb_ = new QComboBox(parent);
layout->addRow(tr("Vertical resolution"), vdiv_layout);
+ // Add the autoranging checkbox
+ QCheckBox* autoranging_cb = new QCheckBox();
+ autoranging_cb->setCheckState(autoranging_ ? Qt::Checked : Qt::Unchecked);
+
+ connect(autoranging_cb, SIGNAL(stateChanged(int)),
+ this, SLOT(on_autoranging_changed(int)));
+
+ layout->addRow(tr("Autoranging"), autoranging_cb);
+
form->addRow(layout);
}
-void AnalogSignal::on_vdivs_changed(int vdivs)
+void AnalogSignal::on_samples_added()
{
- vdivs_ = vdivs;
+ perform_autoranging();
- if (owner_)
+ if (owner_) {
+ // Call order is important, otherwise the lazy event handler won't work
owner_->extents_changed(false, true);
+ owner_->row_item_appearance_changed(false, true);
+ }
+}
+
+void AnalogSignal::on_pos_vdivs_changed(int vdivs)
+{
+ pos_vdivs_ = vdivs;
+
+ if (autoranging_)
+ perform_autoranging(true);
+
+ if (owner_) {
+ // Call order is important, otherwise the lazy event handler won't work
+ owner_->extents_changed(false, true);
+ owner_->row_item_appearance_changed(false, true);
+ }
+}
+
+void AnalogSignal::on_neg_vdivs_changed(int vdivs)
+{
+ neg_vdivs_ = vdivs;
+
+ if (autoranging_)
+ perform_autoranging(true);
+
+ if (owner_) {
+ // Call order is important, otherwise the lazy event handler won't work
+ owner_->extents_changed(false, true);
+ owner_->row_item_appearance_changed(false, true);
+ }
}
void AnalogSignal::on_resolution_changed(int index)
owner_->row_item_appearance_changed(false, true);
}
-} // namespace view
+void AnalogSignal::on_autoranging_changed(int state)
+{
+ autoranging_ = (state == Qt::Checked);
+
+ if (autoranging_)
+ perform_autoranging(true);
+
+ if (owner_) {
+ // Call order is important, otherwise the lazy event handler won't work
+ owner_->extents_changed(false, true);
+ owner_->row_item_appearance_changed(false, true);
+ }
+}
+
+} // namespace TraceView
+} // namespace views
} // namespace pv
projects / pulseview.git / blobdiff