# --- MUI interface configuration ---------------------------------------------
# Use the following icon for the installer EXE file.
-!define MUI_ICON "@PROJECT_SOURCE_DIR@/icons/sigrok-logo-notext.ico"
+!define MUI_ICON "@PROJECT_SOURCE_DIR@/icons/pulseview.ico"
# Show a nice image at the top of each installer page.
!define MUI_HEADERIMAGE
# Change this to where-ever you installed libsigrok.a and so on.
!define CROSS "@CMAKE_INSTALL_PREFIX@"
+# Defines for WinAPI SHChangeNotify call.
+!define SHCNE_ASSOCCHANGED 0x8000000
+!define SHCNF_IDLIST 0
+
# --- Functions ---------------------------------------------------------------
Function register_sr_files
-${registerExtension} "$INSTDIR\pulseview.exe" ".sr" "sigrok session file"
+ ${registerExtension} "$INSTDIR\pulseview.exe" ".sr" "sigrok session file"
+
+ # Force Windows to update the icon cache so that the icon for .sr files shows up.
+ System::Call 'Shell32::SHChangeNotify(i ${SHCNE_ASSOCCHANGED}, i ${SHCNF_IDLIST}, i 0, i 0)'
FunctionEnd
# --- Default section ---------------------------------------------------------
Section "PulseView (required)" Section1
-
# This section is gray (can't be disabled) in the component list.
SectionIn RO
# Firmware files.
File /r "${CROSS}/share/sigrok-firmware"
- # Example *.sr files.
- SetOutPath "$INSTDIR\examples"
- File /r "${CROSS}/share/sigrok-dumps/*"
-
# Generate the uninstaller executable.
WriteUninstaller "$INSTDIR\Uninstall.exe"
"" "Open-source, portable sigrok GUI"
# Create a shortcut for the uninstaller.
- CreateShortCut "$SMPROGRAMS\sigrok\PulseView\Uninstall.lnk" \
+ CreateShortCut "$SMPROGRAMS\sigrok\PulseView\Uninstall PulseView.lnk" \
"$INSTDIR\Uninstall.exe" "" "$INSTDIR\Uninstall.exe" 0 \
SW_SHOWNORMAL "" "Uninstall PulseView"
# Create a shortcut for the Zadig executable.
- CreateShortCut "$SMPROGRAMS\sigrok\PulseView\Zadig.lnk" \
+ CreateShortCut "$SMPROGRAMS\sigrok\PulseView\Zadig (PulseView).lnk" \
"$INSTDIR\zadig.exe" "" "$INSTDIR\zadig.exe" 0 \
- SW_SHOWNORMAL "" "Zadig"
+ SW_SHOWNORMAL "" "Zadig (PulseView)"
# Create a shortcut for the Zadig executable (for Win XP).
- CreateShortCut "$SMPROGRAMS\sigrok\PulseView\Zadig (Win XP).lnk" \
+ CreateShortCut "$SMPROGRAMS\sigrok\PulseView\Zadig (PulseView, Win XP).lnk" \
"$INSTDIR\zadig_xp.exe" "" "$INSTDIR\zadig_xp.exe" 0 \
- SW_SHOWNORMAL "" "Zadig (Win XP)"
+ SW_SHOWNORMAL "" "Zadig (PulseView, Win XP)"
# Create registry keys for "Add/remove programs" in the control panel.
WriteRegStr HKLM "${REGSTR}" "DisplayName" "PulseView"
"$\"$INSTDIR\Uninstall.exe$\""
WriteRegStr HKLM "${REGSTR}" "InstallLocation" "$\"$INSTDIR$\""
WriteRegStr HKLM "${REGSTR}" "DisplayIcon" \
- "$\"$INSTDIR\sigrok-logo-notext.ico$\""
+ "$\"$INSTDIR\pulseview.ico$\""
WriteRegStr HKLM "${REGSTR}" "Publisher" "sigrok"
WriteRegStr HKLM "${REGSTR}" "HelpLink" \
"http://sigrok.org/wiki/PulseView"
# Display "Remove" instead of "Modify/Remove" in the control panel.
WriteRegDWORD HKLM "${REGSTR}" "NoModify" 1
WriteRegDWORD HKLM "${REGSTR}" "NoRepair" 1
+SectionEnd
+Section /o "Example data" Section2
+ # Example *.sr files.
+ SetOutPath "$INSTDIR\examples"
+
+ File "${CROSS}/share/sigrok-dumps/arm_trace/stm32f105/trace_example.sr"
+ File "${CROSS}/share/sigrok-dumps/am230x/am2301/am2301_1mhz.sr"
+ File "${CROSS}/share/sigrok-dumps/avr_isp/atmega88/isp_atmega88_erase_chip.sr"
+ File "${CROSS}/share/sigrok-dumps/can/microchip_mcp2515dm-bm/mcp2515dm-bm-125kbits_msg_222_5bytes.sr"
+ File "${CROSS}/share/sigrok-dumps/dcf77/pollin_dcf1_module/dcf77_120s.sr"
+ File "${CROSS}/share/sigrok-dumps/i2c/eeprom_24xx/microchip_24lc02b/hantek_6022be_powerup.sr"
+ File "${CROSS}/share/sigrok-dumps/i2c/eeprom_24xx/microchip_24lc64/sainsmart_dds120_powerup_scl_sda_analog.sr"
+ File "${CROSS}/share/sigrok-dumps/i2c/potentiometer/analog_devices_ad5258/ad5258_read_once_write_continuously_triangle.sr"
+ File "${CROSS}/share/sigrok-dumps/mdio/lan8720a/lan8720a_read_write_read.sr"
+ File "${CROSS}/share/sigrok-dumps/onewire/owfs/ds28ea00.sr"
+ File "${CROSS}/share/sigrok-dumps/sdcard/sd_mode/rcar-h2/cmd23_cmd18.sr"
+ File "${CROSS}/share/sigrok-dumps/spi/mx25l1605d/mx25l1605d_read.sr"
+ File "${CROSS}/share/sigrok-dumps/uart/gps/mtk3339/mtk3339_8n1_9600.sr"
+ File "${CROSS}/share/sigrok-dumps/usb/hid/mouse/olimex_stm32-h103_usb_hid/olimex_stm32-h103_usb_hid.sr"
+ File "${CROSS}/share/sigrok-dumps/z80/kc85/kc85-20mhz.sr"
+
+ # Create a shortcut for the example data folder.
+ CreateShortCut "$SMPROGRAMS\sigrok\PulseView\Examples (PulseView).lnk" \
+ "$INSTDIR\examples" "" "$INSTDIR\examples" 0 \
+ SW_SHOWNORMAL "" ""
SectionEnd
# --- Uninstaller section -----------------------------------------------------
Section "Uninstall"
-
# Always delete the uninstaller first (yes, this really works).
Delete "$INSTDIR\Uninstall.exe"
# Delete the links from the start menu.
Delete "$SMPROGRAMS\sigrok\PulseView\PulseView.lnk"
- Delete "$SMPROGRAMS\sigrok\PulseView\Uninstall.lnk"
- Delete "$SMPROGRAMS\sigrok\PulseView\Zadig.lnk"
- Delete "$SMPROGRAMS\sigrok\PulseView\Zadig (Win XP).lnk"
+ Delete "$SMPROGRAMS\sigrok\PulseView\Uninstall PulseView.lnk"
+ Delete "$SMPROGRAMS\sigrok\PulseView\Zadig (PulseView).lnk"
+ Delete "$SMPROGRAMS\sigrok\PulseView\Zadig (PulseView, Win XP).lnk"
+ Delete "$SMPROGRAMS\sigrok\PulseView\Examples (PulseView).lnk"
# Delete the sub-directory in the start menu.
RMDir "$SMPROGRAMS\sigrok\PulseView"
# Unregister any previously registered file extension(s).
${unregisterExtension} ".sr" "sigrok session file"
+ # Force Windows to update the icon cache so that the icon for .sr files is reset.
+ System::Call 'Shell32::SHChangeNotify(i ${SHCNE_ASSOCCHANGED}, i ${SHCNF_IDLIST}, i 0, i 0)'
SectionEnd
# --- Component selection section descriptions --------------------------------
-LangString DESC_Section1 ${LANG_ENGLISH} "This installs the PulseView sigrok GUI, some firmware files, the protocol decoders, some example files, and all required libraries."
+LangString DESC_Section1 ${LANG_ENGLISH} "This installs the PulseView sigrok GUI, some firmware files, the protocol decoders, and all required libraries."
+LangString DESC_Section2 ${LANG_ENGLISH} "This installs some example files that you can use to try out the features sigrok has to offer."
!insertmacro MUI_FUNCTION_DESCRIPTION_BEGIN
-!insertmacro MUI_DESCRIPTION_TEXT ${Section1} $(DESC_Section1)
+ !insertmacro MUI_DESCRIPTION_TEXT ${Section1} $(DESC_Section1)
+ !insertmacro MUI_DESCRIPTION_TEXT ${Section2} $(DESC_Section2)
!insertmacro MUI_FUNCTION_DESCRIPTION_END
projects / pulseview.git / blobdiff