From d12e106fe565b2fd431c7306a1f38363960a33d4 Mon Sep 17 00:00:00 2001 From: Elias Oenal Date: Mon, 18 Apr 2016 17:37:07 +0200 Subject: [PATCH] Add an MDIO protocol decoder. This new implementation supports all the features of the old decoder, and additionally supports Clause 22 and 45. --- decoders/mdio/__init__.py | 39 +++++ decoders/mdio/pd.py | 333 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 372 insertions(+) create mode 100644 decoders/mdio/__init__.py create mode 100644 decoders/mdio/pd.py diff --git a/decoders/mdio/__init__.py b/decoders/mdio/__init__.py new file mode 100644 index 0000000..98213b9 --- /dev/null +++ b/decoders/mdio/__init__.py @@ -0,0 +1,39 @@ +## +## This file is part of the libsigrokdecode project. +## +## Copyright (C) 2016 Elias Oenal +## All rights reserved. +## +## Redistribution and use in source and binary forms, with or without +## modification, are permitted provided that the following conditions are met: +## +## 1. Redistributions of source code must retain the above copyright notice, +## this list of conditions and the following disclaimer. +## 2. Redistributions in binary form must reproduce the above copyright notice, +## this list of conditions and the following disclaimer in the documentation +## and/or other materials provided with the distribution. +## +## THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +## AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +## IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +## ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +## LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +## CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +## SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +## INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +## CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +## ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +## POSSIBILITY OF SUCH DAMAGE. +## + +''' +The MDIO (Management Data Input/Output) protocol decoder supports the +MII Management serial bus (a bidirectional bus between the PHY and the STA), +with a clock line (MDC) and a bi-directional data line (MDIO). + +MDIO is also known as SMI (Serial Management Interface). + +It's part of the Ethernet standard. +''' + +from .pd import Decoder diff --git a/decoders/mdio/pd.py b/decoders/mdio/pd.py new file mode 100644 index 0000000..98e76e8 --- /dev/null +++ b/decoders/mdio/pd.py @@ -0,0 +1,333 @@ +## +## This file is part of the libsigrokdecode project. +## +## Copyright (C) 2016 Elias Oenal +## All rights reserved. +## +## Redistribution and use in source and binary forms, with or without +## modification, are permitted provided that the following conditions are met: +## +## 1. Redistributions of source code must retain the above copyright notice, +## this list of conditions and the following disclaimer. +## 2. Redistributions in binary form must reproduce the above copyright notice, +## this list of conditions and the following disclaimer in the documentation +## and/or other materials provided with the distribution. +## +## THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +## AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +## IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +## ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +## LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +## CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +## SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +## INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +## CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +## ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +## POSSIBILITY OF SUCH DAMAGE. +## + +import sigrokdecode as srd + +class Decoder(srd.Decoder): + api_version = 2 + id = 'mdio' + name = 'MDIO' + longname = 'Management Data Input/Output' + desc = 'Half-duplex sync serial bus for MII management between MAC and PHY.' + license = 'bsd' + inputs = ['logic'] + outputs = ['mdio'] + channels = ( + {'id': 'mdc', 'name': 'MDC', 'desc': 'Clock'}, + {'id': 'mdio', 'name': 'MDIO', 'desc': 'Data'}, + ) + options = ( + {'id': 'show_debug_bits', 'desc': 'Show debug bits', + 'default': 'no', 'values': ('yes', 'no')}, + ) + annotations = ( + ('bit-val', 'Bit value'), + ('bit-num', 'Bit number'), + ('frame', 'Frame'), + ('frame-idle', 'Bus idle state'), + ('frame-error', 'Frame error'), + ('decode', 'Decode'), + ) + annotation_rows = ( + ('bit-val', 'Bit value', (0,)), + ('bit-num', 'Bit number', (1,)), + ('frame', 'Frame', (2, 3)), + ('frame-error', 'Frame error', (4,)), + ('decode', 'Decode', (5,)), + ) + + def __init__(self): + self.last_mdc = 1 + self.illegal_bus = 0 + self.samplenum = -1 + self.clause45_addr = -1 # Clause 45 is context sensitive. + self.reset_decoder_state() + + def start(self): + self.out_python = self.register(srd.OUTPUT_PYTHON) + self.out_ann = self.register(srd.OUTPUT_ANN) + + def putbit(self, mdio, ss, es): + self.put(ss, es, self.out_ann, [0, ['%d' % mdio]]) + if self.options['show_debug_bits'] == 'yes': + self.put(ss, es, self.out_ann, [1, ['%d' % (self.bitcount - 1), '%d' % ((self.bitcount - 1) % 10)]]) + + def putdata(self): + self.put(self.ss_frame_field, self.mdiobits[0][2], self.out_ann, + [2, ['DATA: %04X' % self.data, 'DATA', 'D']]) + + if self.clause45 and self.opcode == 0: + self.clause45_addr = self.data + + # Decode data. + if self.opcode > 0 or not self.clause45: + decoded_min = '' + if self.clause45 and self.clause45_addr != -1: + decoded_min += str.format('ADDR: %04X ' % self.clause45_addr) + elif self.clause45: + decoded_min += str.format('ADDR: UKWN ' % self.clause45_addr) + + if self.clause45 and self.opcode > 1 \ + or (not self.clause45 and self.opcode): + decoded_min += str.format('READ: %04X' % self.data) + is_read = 1 + else: + decoded_min += str.format('WRITE: %04X' % self.data) + is_read = 0 + decoded_ext = str.format(' %s: %02d' % \ + ('PRTAD' if self.clause45 else 'PHYAD', self.portad)) + decoded_ext += str.format(' %s: %02d' % \ + ('DEVAD' if self.clause45 else 'REGAD', self.devad)) + if self.ta_invalid or self.op_invalid: + decoded_ext += ' ERROR' + self.put(self.ss_frame, self.mdiobits[0][2], self.out_ann, + [5, [decoded_min + decoded_ext, decoded_min]]) + + self.put(self.ss_frame, self.mdiobits[0][2], self.out_python, + [(bool(self.clause45), int(self.clause45_addr), \ + bool(is_read), int(self.portad), int(self.devad), \ + int(self.data))]) + + # Post read increment address. + if self.clause45 and self.opcode == 2 and self.clause45_addr != -1: + self.clause45_addr += 1 + + def reset_decoder_state(self): + self.mdiobits = [] + self.bitcount = -1 + self.opcode = -1 + self.clause45 = 0 + self.ss_frame = -1 + self.ss_frame_field = -1 + self.preamble_len = 0 + self.ta_invalid = -1 + self.op_invalid = '' + self.portad = -1 + self.portad_bits = 5 + self.devad = -1 + self.devad_bits = 5 + self.data = -1 + self.data_bits = 16 + self.state = 'PRE' + + def state_PRE(self, mdio): + if self.illegal_bus: + if mdio == 0: # Stay in illegal bus state. + return + else: # Leave and continue parsing. + self.illegal_bus = 0 + self.put(self.ss_illegal, self.samplenum, self.out_ann, + [4, ['ILLEGAL BUS STATE', 'ILL']]) + self.ss_frame = self.samplenum + + if self.ss_frame == -1: + self.ss_frame = self.samplenum + + if mdio == 1: + self.preamble_len += 1 + + # Valid MDIO can't clock more than 16 succeeding ones without being + # in either IDLE or PRE. + if self.preamble_len > 16: + if self.preamble_len >= 10000 + 32: + self.put(self.ss_frame, self.mdiobits[32][1], self.out_ann, + [3, ['IDLE #%d' % (self.preamble_len - 32), 'IDLE', 'I']]) + self.ss_frame = self.mdiobits[32][1] + self.preamble_len = 32 + # This is getting out of hand, free some memory. + del self.mdiobits[33:-1] + if mdio == 0: + if self.preamble_len < 32: + self.ss_frame = self.mdiobits[self.preamble_len][1] + self.put(self.ss_frame, self.samplenum, self.out_ann, + [4, ['SHORT PREAMBLE', 'SHRT PRE']]) + elif self.preamble_len > 32: + self.ss_frame = self.mdiobits[32][1] + self.put(self.mdiobits[self.preamble_len][1], + self.mdiobits[32][1], self.out_ann, + [3, ['IDLE #%d' % (self.preamble_len - 32), + 'IDLE', 'I']]) + self.preamble_len = 32 + else: + self.ss_frame = self.mdiobits[32][1] + self.put(self.ss_frame, self.samplenum, self.out_ann, + [2, ['PRE #%d' % self.preamble_len, 'PRE', 'P']]) + self.ss_frame_field = self.samplenum + self.state = 'ST' + elif mdio == 0: + self.ss_illegal = self.ss_frame + self.illegal_bus = 1 + + def state_ST(self, mdio): + if mdio == 0: + self.clause45 = 1 + self.state = 'OP' + + def state_OP(self, mdio): + if self.opcode == -1: + if self.clause45: + st = ['ST (Clause 45)', 'ST 45'] + else: + st = ['ST (Clause 22)', 'ST 22'] + self.put(self.ss_frame_field, self.samplenum, self.out_ann, + [2, st + ['ST', 'S']]) + self.ss_frame_field = self.samplenum + + if mdio: + self.opcode = 2 + else: + self.opcode = 0 + else: + if self.clause45: + self.state = 'PRTAD' + self.opcode += mdio + else: + if mdio == self.opcode: + self.op_invalid = 'invalid for Clause 22' + self.state = 'PRTAD' + + def state_PRTAD(self, mdio): + if self.portad == -1: + self.portad = 0 + if self.clause45: + if self.opcode == 0: + op = ['OP: ADDR', 'OP: A'] + elif self.opcode == 1: + op = ['OP: WRITE', 'OP: W'] + elif self.opcode == 2: + op = ['OP: READINC', 'OP: RI'] + elif self.opcode == 3: + op = ['OP: READ', 'OP: R'] + else: + op = ['OP: READ', 'OP: R'] if self.opcode else ['OP: WRITE', 'OP: W'] + self.put(self.ss_frame_field, self.samplenum, self.out_ann, + [2, op + ['OP', 'O']]) + if self.op_invalid: + self.put(self.ss_frame_field, self.samplenum, self.out_ann, + [4, ['OP %s' % self.op_invalid, 'OP', 'O']]) + self.ss_frame_field = self.samplenum + self.portad_bits -= 1 + self.portad |= mdio << self.portad_bits + if not self.portad_bits: + self.state = 'DEVAD' + + def state_DEVAD(self, mdio): + if self.devad == -1: + self.devad = 0 + if self.clause45: + prtad = ['PRTAD: %02d' % self.portad, 'PRT', 'P'] + else: + prtad = ['PHYAD: %02d' % self.portad, 'PHY', 'P'] + self.put(self.ss_frame_field, self.samplenum, self.out_ann, + [2, prtad]) + self.ss_frame_field = self.samplenum + self.devad_bits -= 1 + self.devad |= mdio << self.devad_bits + if not self.devad_bits: + self.state = 'TA' + + def state_TA(self, mdio): + if self.ta_invalid == -1: + self.ta_invalid = '' + if self.clause45: + regad = ['DEVAD: %02d' % self.devad, 'DEV', 'D'] + else: + regad = ['REGAD: %02d' % self.devad, 'REG', 'R'] + self.put(self.ss_frame_field, self.samplenum, self.out_ann, + [2, regad]) + self.ss_frame_field = self.samplenum + if mdio != 1 and ((self.clause45 and self.opcode < 2) + or (not self.clause45 and self.opcode == 0)): + self.ta_invalid = ' invalid (bit1)' + else: + if mdio != 0: + if self.ta_invalid: + self.ta_invalid = ' invalid (bit1 and bit2)' + else: + self.ta_invalid = ' invalid (bit2)' + self.state = 'DATA' + + def state_DATA(self, mdio): + if self.data == -1: + self.data = 0 + self.put(self.ss_frame_field, self.samplenum, self.out_ann, + [2, ['TA', 'T']]) + if self.ta_invalid: + self.put(self.ss_frame_field, self.samplenum, self.out_ann, + [4, ['TA%s' % self.ta_invalid, 'TA', 'T']]) + self.ss_frame_field = self.samplenum + self.data_bits -= 1 + self.data |= mdio << self.data_bits + if not self.data_bits: + # Output final bit. + self.mdiobits[0][2] = self.mdiobits[0][1] + self.quartile_cycle_length() + self.bitcount += 1 + self.putbit(self.mdiobits[0][0], self.mdiobits[0][1], self.mdiobits[0][2]) + self.putdata() + self.reset_decoder_state() + + def process_state(self, argument, mdio): + method_name = 'state_' + str(argument) + method = getattr(self, method_name) + return method(mdio) + + # Returns the first quartile point of the frames cycle lengths. This is a + # conservative guess for the end of the last cycle. On average it will be + # more likely to fall short, than being too long, which makes for better + # readability in GUIs. + def quartile_cycle_length(self): + # 48 is the minimum number of samples we have to have at the end of a + # frame. The last sample only has a leading clock edge and is ignored. + bitlen = [] + for i in range(1, 49): + bitlen.append(self.mdiobits[i][2] - self.mdiobits[i][1]) + bitlen = sorted(bitlen) + return bitlen[12] + + def handle_bit(self, mdio): + self.bitcount += 1 + self.mdiobits.insert(0, [mdio, self.samplenum, -1]) + + if self.bitcount > 0: + self.mdiobits[1][2] = self.samplenum # Note end of last cycle. + # Output the last bit we processed. + self.putbit(self.mdiobits[1][0], self.mdiobits[1][1], self.mdiobits[1][2]) + + self.process_state(self.state, mdio) + + def decode(self, ss, es, data): + for (self.samplenum, pins) in data: + # Ignore identical samples early on (for performance reasons). + if self.last_mdc == pins[0]: + continue + self.last_mdc = pins[0] + if pins[0] == 0: # Check for rising edge. + continue + + # Found the correct clock edge, now get/handle the bit(s). + self.handle_bit(pins[1]) -- 2.30.2