libsigrokdecode.git
6 years agoonewire_link: Define annotation rows.
Uwe Hermann [Sat, 1 Feb 2014 14:25:53 +0000 (15:25 +0100)]
onewire_link: Define annotation rows.

6 years agodcf77: Fix incorrect startsample for "month" field.
Uwe Hermann [Sat, 1 Feb 2014 13:58:23 +0000 (14:58 +0100)]
dcf77: Fix incorrect startsample for "month" field.

6 years agoavr_isp: Fix a bug resulting in incorrect start samples.
Uwe Hermann [Sat, 1 Feb 2014 13:46:52 +0000 (14:46 +0100)]
avr_isp: Fix a bug resulting in incorrect start samples.

6 years agodcf77: Define annotation rows.
Uwe Hermann [Fri, 31 Jan 2014 13:56:17 +0000 (14:56 +0100)]
dcf77: Define annotation rows.

6 years agospi: Define annotation rows.
Uwe Hermann [Fri, 31 Jan 2014 13:56:14 +0000 (14:56 +0100)]
spi: Define annotation rows.

6 years agouart: Define annotation rows.
Uwe Hermann [Thu, 30 Jan 2014 21:26:39 +0000 (22:26 +0100)]
uart: Define annotation rows.

Also, provide all the required annotation classes for this to work
properly.

6 years agoAdd support for annotation rows.
Uwe Hermann [Fri, 31 Jan 2014 15:59:22 +0000 (16:59 +0100)]
Add support for annotation rows.

An annotation row is a list of annotation classes that should all be
displayed in the same "row" in GUIs.

For example, the UART decoder would have at least two rows (for decoded
RX and TX data/startbits/stopbits/paritybits), the SPI decoder would have
at least two rows (for decoded MISO and MOSI data), and so on.

Each annotation row has a short ID string (mostly for use in
command-line frontends), a description string (mostly for use by GUIs),
and a tuple/list of annotation class IDs belonging to this row.

If no annotation rows are provided by the decoder, frontends can
consider this as the "trivial" case of all annotation classes being
displayed on the same (only) row.

6 years agouart: Allow either RX or TX to be optional.
Uwe Hermann [Thu, 30 Jan 2014 23:45:56 +0000 (00:45 +0100)]
uart: Allow either RX or TX to be optional.

6 years agosrd_inst_probe_set_all: Error out upon missing required probes.
Uwe Hermann [Thu, 30 Jan 2014 23:13:32 +0000 (00:13 +0100)]
srd_inst_probe_set_all: Error out upon missing required probes.

6 years agos/out_proto/out_python/.
Uwe Hermann [Thu, 30 Jan 2014 21:37:29 +0000 (22:37 +0100)]
s/out_proto/out_python/.

The output type is now called OUTPUT_PYTHON, adapt all PDs to that.

6 years agoFix warnings exposed by -Wmissing-prototypes.
Uwe Hermann [Thu, 30 Jan 2014 18:33:13 +0000 (19:33 +0100)]
Fix warnings exposed by -Wmissing-prototypes.

6 years agoconfigure.ac: Add -Wmissing-prototypes.
Uwe Hermann [Thu, 30 Jan 2014 18:28:49 +0000 (19:28 +0100)]
configure.ac: Add -Wmissing-prototypes.

6 years agoconfigure.ac: Only check for things we actually use.
Uwe Hermann [Thu, 30 Jan 2014 18:19:23 +0000 (19:19 +0100)]
configure.ac: Only check for things we actually use.

Drop checks where we don't use the result (yet). We might bring back
some of those once we start actually using the result in the code.

6 years agomx25lxx05d: Add probe test case.
Uwe Hermann [Thu, 30 Jan 2014 18:17:40 +0000 (19:17 +0100)]
mx25lxx05d: Add probe test case.

6 years agouart: Add trekstor_ebr30_a test case.
Uwe Hermann [Thu, 30 Jan 2014 16:54:16 +0000 (17:54 +0100)]
uart: Add trekstor_ebr30_a test case.

6 years agouart: Better fix for ASCII output.
Uwe Hermann [Thu, 30 Jan 2014 14:26:06 +0000 (15:26 +0100)]
uart: Better fix for ASCII output.

This is a temporary thing, later there'll be some facility to let
frontends handle any annotations marked as "this is a number" (as opposed
to "this is a string") in a generic manner and display them in any
supported (by that frontend) format, e.g. ascii, hex, oct, decimal,
binary, big-endian vs. little-endian, and so on.

This is a fix related to #201.

6 years agospi: Add mx25l1605d_probe test case.
Uwe Hermann [Wed, 29 Jan 2014 17:34:10 +0000 (18:34 +0100)]
spi: Add mx25l1605d_probe test case.

6 years agospi: Add atmega32_00 test case.
Uwe Hermann [Wed, 29 Jan 2014 17:25:08 +0000 (18:25 +0100)]
spi: Add atmega32_00 test case.

6 years agospi: Rename 'sck' to the more common 'clk'.
Uwe Hermann [Tue, 28 Jan 2014 23:31:14 +0000 (00:31 +0100)]
spi: Rename 'sck' to the more common 'clk'.

6 years agospi: Allow MISO or MOSI to be optional.
Uwe Hermann [Mon, 27 Jan 2014 13:38:47 +0000 (14:38 +0100)]
spi: Allow MISO or MOSI to be optional.

This fixes bug #175.

6 years agotests/pdtest: Fix -R (takes an argument).
Uwe Hermann [Mon, 27 Jan 2014 14:50:15 +0000 (15:50 +0100)]
tests/pdtest: Fix -R (takes an argument).

6 years agospi: Drop temporary hack for combined MISO/MOSI out.
Uwe Hermann [Sat, 25 Jan 2014 08:55:19 +0000 (09:55 +0100)]
spi: Drop temporary hack for combined MISO/MOSI out.

6 years agoFix out-of-tree build.
Uwe Hermann [Mon, 27 Jan 2014 14:09:08 +0000 (15:09 +0100)]
Fix out-of-tree build.

This fixes 'make install' and 'make dist' for out-of-tree builds.

6 years agotests/runtc.c: Minor whitespace fixes.
Uwe Hermann [Wed, 22 Jan 2014 22:06:01 +0000 (23:06 +0100)]
tests/runtc.c: Minor whitespace fixes.

6 years agotests/pdtest: Add missing license header.
Uwe Hermann [Wed, 22 Jan 2014 22:03:02 +0000 (23:03 +0100)]
tests/pdtest: Add missing license header.

6 years agotests/pdtest: Fix shebang line.
Uwe Hermann [Wed, 22 Jan 2014 22:01:52 +0000 (23:01 +0100)]
tests/pdtest: Fix shebang line.

6 years agoAll PDs: Consistent naming/case for annotation shortnames/IDs.
Uwe Hermann [Wed, 22 Jan 2014 21:56:08 +0000 (22:56 +0100)]
All PDs: Consistent naming/case for annotation shortnames/IDs.

6 years agoAll PDs: Drop unneeded comments.
Uwe Hermann [Wed, 22 Jan 2014 21:47:18 +0000 (22:47 +0100)]
All PDs: Drop unneeded comments.

The single comment re-stating the PD's name / description / purpose in
each pd.py file is not really needed, that info is available in the
Decoder class' attributes already.

6 years agoAll PDs: Improve/fix descriptions.
Uwe Hermann [Wed, 22 Jan 2014 21:43:21 +0000 (22:43 +0100)]
All PDs: Improve/fix descriptions.

6 years agotransitioncounter: Drop PD (obsolete).
Uwe Hermann [Mon, 20 Jan 2014 20:52:15 +0000 (21:52 +0100)]
transitioncounter: Drop PD (obsolete).

This decoder was just a simple test case for early libsigrokdecode
development and testing, it is neither useful nor properly working
currently, so drop it.

6 years agouart: Add binaryout/dump support, drop obsolete 'uart_dump' PD.
Uwe Hermann [Mon, 20 Jan 2014 16:43:01 +0000 (17:43 +0100)]
uart: Add binaryout/dump support, drop obsolete 'uart_dump' PD.

The functionality of the preliminary 'uart_dump' PD is now available
in the proper 'uart' PD, via the OUTPUT_BINARY mechanism that frontends
can use to dump decoded data (in various formats) to a file, or pipe it
into other applications, and so on.

Old sigrok-cli example usage:

 $ sigrok-cli -i foo.sr -P uart:rx=0:tx=1,uart_dump:filename=bootlog.txt

New sigrok-cli example usage:

 $ sigrok-cli -i foo.sr -P uart:rx=0:tx=1 -B uart=rxtx > bootlog.txt

New sigrok-cli example usage (piping into other applications):

 $ sigrok-cli -i foo.sr -P uart:rx=0:tx=1 -B uart=rxtx | grep "whatever"

6 years agoi2s: Add WAV dump support, drop obsolete 'i2s_dump' PD.
Uwe Hermann [Sat, 18 Jan 2014 18:15:41 +0000 (19:15 +0100)]
i2s: Add WAV dump support, drop obsolete 'i2s_dump' PD.

The functionality of the preliminary 'i2s_dump' PD is now available
in the proper 'i2s' PD, via the OUTPUT_BINARY mechanism that frontends
can use to dump decoded data (in various formats) to a file, or pipe it
into other applications, and so on.

Old sigrok-cli example usage:

 $ sigrok-cli -i 2ch-16bit-16khz.sr \
-P i2s:sck=0:ws=1:sd=2,i2s_dump:filename=foo.wav
 $ aplay foo.wav

New sigrok-cli example usage:

 $ sigrok-cli -i 2ch-16bit-16khz.sr \
-P i2s:sck=0:ws=1:sd=2 -B i2s=wav > foo.wav
 $ aplay foo.wav

New sigrok-cli example usage (piping into other applications):

 $ sigrok-cli -i 2ch-16bit-16khz.sr \
-P i2s:sck=0:ws=1:sd=2 -B i2s=wav | aplay -

6 years agoconfigure.ac: Drop obsolete MinGW Python3 workaround.
Uwe Hermann [Fri, 17 Jan 2014 16:56:26 +0000 (17:56 +0100)]
configure.ac: Drop obsolete MinGW Python3 workaround.

We just use dummy/fake python3.pc files on Windows so that the usual
pkg-config mechanism works there as well.

6 years agoconfigure.ac: Check for all known Python3 pkg-config names.
Uwe Hermann [Fri, 17 Jan 2014 16:56:08 +0000 (17:56 +0100)]
configure.ac: Check for all known Python3 pkg-config names.

Even when using pkg-config not all distro/platform specific issues are
transparent, unfortunately. On some systems the pkg-config file is
named "python3.pc" on others it's versioned, e.g. "python-3.2.pc".

See also: http://sigrok.org/wiki/Libsigrokdecode/Python

This should fix the build on e.g. FreeBSD, NetBSD, Mac OS X (some
versions), and possibly various Linux distros, e.g. Gentoo.

Also, drop manual AC_MSG_ERROR() and let PKG_CHECK_MODULES() output a
more verbose and standardized error message if Python 3 is not found.

6 years agoparallel: Make CLK probe optional.
Uwe Hermann [Mon, 13 Jan 2014 22:26:36 +0000 (23:26 +0100)]
parallel: Make CLK probe optional.

When no CLK probe is supplied to this PD, handle any transition on
any of the supplied data probes as if there had been a CLK transition.

(based on a suggestion/patch by "bmx" from the #sigrok channel, thanks!)

6 years agoLink against libm to avoid Python related linking errors.
Uwe Hermann [Fri, 3 Jan 2014 16:41:24 +0000 (17:41 +0100)]
Link against libm to avoid Python related linking errors.

The python3-config script reported "-lm" as linker option previously,
but we switched to using pkg-config (among other things for
cross-compile support) which doesn't report "-lm" though (this is a
common behaviour across multiple distros and OSes).

6 years agoconfigure.ac: Use pkg-config to check for python
Marcus Comstedt [Thu, 2 Jan 2014 11:43:34 +0000 (12:43 +0100)]
configure.ac: Use pkg-config to check for python

Using python-config does not work when cross-compiling, since it
can only be run on the host system.

6 years agojtag: Use proper annotation classes, fix GUI usage.
Uwe Hermann [Sat, 28 Dec 2013 22:17:18 +0000 (23:17 +0100)]
jtag: Use proper annotation classes, fix GUI usage.

This closes bug #156.

6 years agojtag: Refactor and simplify some code.
Uwe Hermann [Sun, 13 Oct 2013 13:39:44 +0000 (15:39 +0200)]
jtag: Refactor and simplify some code.

6 years agoDo some more I2C to I²C changes.
Uwe Hermann [Sat, 28 Dec 2013 14:15:06 +0000 (15:15 +0100)]
Do some more I2C to I²C changes.

6 years agoi2s: Fix typo.
Uwe Hermann [Sat, 28 Dec 2013 14:11:55 +0000 (15:11 +0100)]
i2s: Fix typo.

6 years agomxc6225xu: Replace I2C with I²C
Joel Holdsworth [Sat, 28 Dec 2013 08:17:02 +0000 (09:17 +0100)]
mxc6225xu: Replace I2C with I²C

6 years agolm75: Replace I2C with I²C
Joel Holdsworth [Sat, 28 Dec 2013 08:16:13 +0000 (09:16 +0100)]
lm75: Replace I2C with I²C

6 years agoi2s_dump: Replace I2S with I²S
Joel Holdsworth [Sat, 28 Dec 2013 08:03:48 +0000 (09:03 +0100)]
i2s_dump: Replace I2S with I²S

6 years agoi2s: Replace I2S with I²S
Joel Holdsworth [Sat, 28 Dec 2013 08:02:34 +0000 (09:02 +0100)]
i2s: Replace I2S with I²S

6 years agoi2cfiler: Replaced I2C with I²C
Joel Holdsworth [Sat, 28 Dec 2013 08:01:02 +0000 (09:01 +0100)]
i2cfiler: Replaced I2C with I²C

6 years agoi2cdemux: Replaced I2C with I²C
Joel Holdsworth [Sat, 28 Dec 2013 00:37:18 +0000 (01:37 +0100)]
i2cdemux: Replaced I2C with I²C

6 years agoi2c: Replaced I2C with I²C
Joel Holdsworth [Sat, 28 Dec 2013 00:21:26 +0000 (01:21 +0100)]
i2c: Replaced I2C with I²C

6 years agoruntc: Fix conditional build on non-Linux systems.
Bert Vermeulen [Sun, 22 Dec 2013 22:07:23 +0000 (23:07 +0100)]
runtc: Fix conditional build on non-Linux systems.

6 years agoDon't install runtc.
Arkadiusz Miśkiewicz [Wed, 18 Dec 2013 15:12:34 +0000 (16:12 +0100)]
Don't install runtc.

Don't install runtc. Not meant for generic usage.

Signed-off-by: Arkadiusz Miśkiewicz <arekm@maven.pl>
6 years agoruntc: Output binary as ASCII timestamp/class/hex bytes instead.
Bert Vermeulen [Wed, 18 Dec 2013 11:04:26 +0000 (12:04 +0100)]
runtc: Output binary as ASCII timestamp/class/hex bytes instead.

This allows for verifying timestamps and classes as well.

6 years agoruntc: Make sure to compile against this library
Bert Vermeulen [Sun, 15 Dec 2013 14:55:35 +0000 (15:55 +0100)]
runtc: Make sure to compile against this library

It might compile against a previously-installed one unless the linker
finds it in the top directory first.

6 years agoi2c: Add Python tests.
Bert Vermeulen [Fri, 13 Dec 2013 17:13:08 +0000 (18:13 +0100)]
i2c: Add Python tests.

6 years agopdtest/runtc: Add support for Python output types.
Bert Vermeulen [Fri, 13 Dec 2013 17:11:52 +0000 (18:11 +0100)]
pdtest/runtc: Add support for Python output types.

6 years agoSend SRD_OUTPUT_PYTHON to registered callbacks as well.
Bert Vermeulen [Fri, 13 Dec 2013 16:57:01 +0000 (17:57 +0100)]
Send SRD_OUTPUT_PYTHON to registered callbacks as well.

There's really only one use case for this: the testing framework. This
allows it to check what gets sent up the stack as well.

6 years agoPrune dead code.
Bert Vermeulen [Fri, 13 Dec 2013 10:52:38 +0000 (11:52 +0100)]
Prune dead code.

6 years agoi2c: Avoid obsolete method.
Bert Vermeulen [Fri, 13 Dec 2013 10:51:41 +0000 (11:51 +0100)]
i2c: Avoid obsolete method.

6 years agoNo need to mess with method reference counts.
Bert Vermeulen [Fri, 13 Dec 2013 10:29:59 +0000 (11:29 +0100)]
No need to mess with method reference counts.

6 years agoi2c: Add binary tests.
Bert Vermeulen [Thu, 12 Dec 2013 12:30:36 +0000 (13:30 +0100)]
i2c: Add binary tests.

6 years agopdtest/runtc: Add support for binary output types.
Bert Vermeulen [Thu, 12 Dec 2013 12:29:37 +0000 (13:29 +0100)]
pdtest/runtc: Add support for binary output types.

6 years agopdtest: Add -f option to automatically fix failing tests.
Bert Vermeulen [Thu, 12 Dec 2013 12:28:21 +0000 (13:28 +0100)]
pdtest: Add -f option to automatically fix failing tests.

6 years agoruntc: Add support for binary output.
Bert Vermeulen [Thu, 12 Dec 2013 00:29:26 +0000 (01:29 +0100)]
runtc: Add support for binary output.

6 years agoUse new binary class definition format.
Bert Vermeulen [Wed, 11 Dec 2013 23:57:04 +0000 (00:57 +0100)]
Use new binary class definition format.

6 years agoBinary classes are now defined as (name, description).
Bert Vermeulen [Wed, 11 Dec 2013 23:56:12 +0000 (00:56 +0100)]
Binary classes are now defined as (name, description).

6 years agoEasier access to sequences of strings, not just lists.
Bert Vermeulen [Wed, 11 Dec 2013 22:41:02 +0000 (23:41 +0100)]
Easier access to sequences of strings, not just lists.

6 years agoruntc: Return errorcode according to testcase result.
Bert Vermeulen [Wed, 11 Dec 2013 20:53:17 +0000 (21:53 +0100)]
runtc: Return errorcode according to testcase result.

6 years agopdtest: Use -dd to turn on SR/SRD debugging.
Bert Vermeulen [Wed, 11 Dec 2013 20:52:33 +0000 (21:52 +0100)]
pdtest: Use -dd to turn on SR/SRD debugging.

6 years agocheck: Make sure to test this set of decoders, not the installed ones.
Bert Vermeulen [Wed, 11 Dec 2013 17:36:42 +0000 (18:36 +0100)]
check: Make sure to test this set of decoders, not the installed ones.

6 years agoLoad decoders from all search paths, not just the default.
Bert Vermeulen [Wed, 11 Dec 2013 17:31:56 +0000 (18:31 +0100)]
Load decoders from all search paths, not just the default.

srd_decoder_load_all() was really only getting a list of decoders
from the default (installation) path, so could not find uninstalled
decoders, or those in a custom added search path.

This broke development of new PDs when using the SIGROKDECODE_DIR
environment variable, and broke many of the unit tests in the tests/
directory -- those actually tested against the already-installed
decoders, not the ones about to be installed.

6 years agoClear decoder list after unloading, not just at exit.
Bert Vermeulen [Wed, 11 Dec 2013 15:30:25 +0000 (16:30 +0100)]
Clear decoder list after unloading, not just at exit.

6 years agoruntc: Make sure to test this set of decoders, not the installed ones.
Bert Vermeulen [Wed, 11 Dec 2013 11:50:38 +0000 (12:50 +0100)]
runtc: Make sure to test this set of decoders, not the installed ones.

6 years agopdtest: Don't bother with diff if any error at all occurred.
Bert Vermeulen [Wed, 11 Dec 2013 11:49:30 +0000 (12:49 +0100)]
pdtest: Don't bother with diff if any error at all occurred.

6 years agopdtest: Add option for custom sigrok-dumps repository path.
Bert Vermeulen [Wed, 11 Dec 2013 11:48:50 +0000 (12:48 +0100)]
pdtest: Add option for custom sigrok-dumps repository path.

6 years agopdtest: Always sanity-check all testcases.
Bert Vermeulen [Wed, 11 Dec 2013 11:39:50 +0000 (12:39 +0100)]
pdtest: Always sanity-check all testcases.

6 years agoClean up runtc build.
Bert Vermeulen [Wed, 11 Dec 2013 00:21:22 +0000 (01:21 +0100)]
Clean up runtc build.

This only compiles libsigrok into the one target that needs it, instead
of slopping it all over the place.

6 years agoAdd protocol decoder testing framework.
Bert Vermeulen [Tue, 10 Dec 2013 16:17:38 +0000 (17:17 +0100)]
Add protocol decoder testing framework.

This adds a tool in the tests directory, called pdtest. It uses the
"test/" directory in every PD directory, if present, to run the
PD against dumps found in the sigrok-dumps repository, and compares
the output against ".output" files in the "test/" directory. The file
"test/test.conf" is used to configure which tests to run.

A separate tool (tests/runtc.c) is used to run the actual decoding and
report output.

To get an overview of the options, run tests/pdtest without any options.

6 years agoAPI clarification.
Bert Vermeulen [Tue, 10 Dec 2013 01:38:44 +0000 (02:38 +0100)]
API clarification.

6 years agoFix 'dist' make target.
Bert Vermeulen [Tue, 10 Dec 2013 00:05:59 +0000 (01:05 +0100)]
Fix 'dist' make target.

6 years agoAvoid GError warning when unloading decoders.
Bert Vermeulen [Mon, 9 Dec 2013 10:44:27 +0000 (11:44 +0100)]
Avoid GError warning when unloading decoders.

6 years agoSupport DESTDIR on install targets.
Bert Vermeulen [Mon, 9 Dec 2013 00:40:23 +0000 (01:40 +0100)]
Support DESTDIR on install targets.

Fixes bug 215.

6 years agoparallel: start(): Drop obsoleted metadata parameter.
Uwe Hermann [Wed, 4 Dec 2013 10:05:00 +0000 (11:05 +0100)]
parallel: start(): Drop obsoleted metadata parameter.

This fixes bug #202.

6 years agouart: Display non-ASCII characters properly.
Uwe Hermann [Tue, 3 Dec 2013 13:46:23 +0000 (14:46 +0100)]
uart: Display non-ASCII characters properly.

We use the [XX] notation for non-printable characters, which is what
various other logic analyzer software packages do too, e.g. the
CWAV USBee Suite.

This fixes bug #201.

6 years agoPython 3.2 and portability fixes.
Bert Vermeulen [Fri, 29 Nov 2013 12:59:51 +0000 (13:59 +0100)]
Python 3.2 and portability fixes.

6 years agoClean up autoconf leftover configuration.
Bert Vermeulen [Wed, 27 Nov 2013 16:50:23 +0000 (17:50 +0100)]
Clean up autoconf leftover configuration.

6 years agoedid: Make sure to install the vendor list.
Bert Vermeulen [Wed, 27 Nov 2013 15:52:56 +0000 (16:52 +0100)]
edid: Make sure to install the vendor list.

6 years agoAutomate protocol decoder installation.
Bert Vermeulen [Wed, 27 Nov 2013 15:47:04 +0000 (16:47 +0100)]
Automate protocol decoder installation.

This automatically figures out the files to install for each protocol
decoder, without involving autotools.

All python files (filenames ending in .py) are always installed. If a
protocol decoder requires installation of a non-python file, a small
file called 'config' can be created in that protocol decoder's
directory, with the following content:

# comments are ok
extra-install vendorlist.txt commands.txt

6 years agoRemove 64-probe limit.
Bert Vermeulen [Tue, 26 Nov 2013 15:05:54 +0000 (16:05 +0100)]
Remove 64-probe limit.

Fixes bug 120.

6 years agoAdd a missing #include.
Uwe Hermann [Tue, 19 Nov 2013 20:14:03 +0000 (21:14 +0100)]
Add a missing #include.

This causes compiler errors in some setups otherwise, e.g.:

  CC       libsigrokdecode_la-session.lo
session.c: In function 'srd_session_metadata_set':
session.c:195:46: error: expected ')' before 'PRIu64'
  srd_dbg("Setting session %d samplerate to %"PRIu64".",
                                              ^
session.c: In function 'srd_session_send':
session.c:242:15: error: expected ')' before 'PRIu64'
    "number %" PRIu64 ", %" PRIu64 " bytes at 0x%p",
               ^

6 years agoTurn off excessive logging
Bert Vermeulen [Mon, 18 Nov 2013 09:57:34 +0000 (10:57 +0100)]
Turn off excessive logging

6 years agoRemove unreasonable test
Bert Vermeulen [Mon, 18 Nov 2013 09:55:02 +0000 (10:55 +0100)]
Remove unreasonable test

6 years agoFix inverted condition on doc check
Bert Vermeulen [Mon, 18 Nov 2013 09:49:04 +0000 (10:49 +0100)]
Fix inverted condition on doc check

6 years agoDon't try to load an already-loaded module
Bert Vermeulen [Mon, 18 Nov 2013 09:44:28 +0000 (10:44 +0100)]
Don't try to load an already-loaded module

Python silently uses the existing module anyway, but the library
was counting it as an extra module. This was exposed by a test
case in the test suite.

6 years agoDon't decrease borrowed reference to probe definition dict
Bert Vermeulen [Mon, 18 Nov 2013 08:41:14 +0000 (09:41 +0100)]
Don't decrease borrowed reference to probe definition dict

This fixes bug 177.

6 years agoFix inverted condition on decoder check
Bert Vermeulen [Mon, 18 Nov 2013 00:33:54 +0000 (01:33 +0100)]
Fix inverted condition on decoder check

6 years agoCheck library initialization before handling decoders
Bert Vermeulen [Mon, 18 Nov 2013 00:21:16 +0000 (01:21 +0100)]
Check library initialization before handling decoders

6 years agoClean up prototypes
Bert Vermeulen [Mon, 18 Nov 2013 00:14:02 +0000 (01:14 +0100)]
Clean up prototypes

6 years agoBetter error checking on session metadata
Bert Vermeulen [Sun, 17 Nov 2013 23:03:53 +0000 (00:03 +0100)]
Better error checking on session metadata

6 years agoOnly instance-related functionality remains, rename source file
Bert Vermeulen [Sat, 16 Nov 2013 22:03:19 +0000 (23:03 +0100)]
Only instance-related functionality remains, rename source file

6 years agoMove initialization/shutdown into srd.c
Bert Vermeulen [Sat, 16 Nov 2013 21:58:28 +0000 (22:58 +0100)]
Move initialization/shutdown into srd.c

6 years agoMove session-specific functionality into session.c
Bert Vermeulen [Sat, 16 Nov 2013 22:14:50 +0000 (23:14 +0100)]
Move session-specific functionality into session.c