libsigrokdecode.git
8 years agocommiting new unfinished 1-wire decoder
Iztok Jeras [Tue, 15 May 2012 21:15:26 +0000 (23:15 +0200)]
commiting new unfinished 1-wire decoder

8 years agosrd: MX25Lxx05D: Fix inverted SRWD bit handling.
Uwe Hermann [Fri, 18 May 2012 19:42:29 +0000 (21:42 +0200)]
srd: MX25Lxx05D: Fix inverted SRWD bit handling.

8 years agosrd: MX25Lxx05D: Decode status register bits.
Uwe Hermann [Fri, 18 May 2012 17:58:58 +0000 (19:58 +0200)]
srd: MX25Lxx05D: Decode status register bits.

8 years agosrd: MX25Lxx05D: Fix SE command.
Uwe Hermann [Fri, 18 May 2012 13:28:52 +0000 (15:28 +0200)]
srd: MX25Lxx05D: Fix SE command.

8 years agosrd: MX25Lxx05D: Implement READ command.
Uwe Hermann [Fri, 18 May 2012 13:05:03 +0000 (15:05 +0200)]
srd: MX25Lxx05D: Implement READ command.

8 years agosrd: MX25Lxx05D: Implement RDSR and PP commands.
Uwe Hermann [Wed, 16 May 2012 21:06:21 +0000 (23:06 +0200)]
srd: MX25Lxx05D: Implement RDSR and PP commands.

Also, some small fixes and additional debug code/output.

8 years agosrd: spi: Document output protocol, send CS# changes.
Uwe Hermann [Wed, 16 May 2012 20:48:47 +0000 (22:48 +0200)]
srd: spi: Document output protocol, send CS# changes.

As per guidelines in HACKING, the protocol "commands"/items should be ALLCAPS,
thus change 'data' to 'DATA'. Also, fix MX25Lxx05D protocol decoder
accordingly, currently the only one we have which stacks on top of SPI.

Add a new 'CS-CHANGE' output protocol item, which is sent upon every
change of the CS# pin value (either 0->1, or vice versa). This is needed
by various higher-level PDs.

8 years agosr/srd/cli: Fix compiling with Homebrew.
Pekka Nikander [Fri, 11 May 2012 16:23:21 +0000 (19:23 +0300)]
sr/srd/cli: Fix compiling with Homebrew.

Add ACLOCAL_DIR setting and AM_PROG_AR macro for compiling with Homebrew
under Mac OS X.

Applies essentially the same change to
{libsigrok,libsigrokdecode,sigrok-cli}/{autogen.sh,configure.ac}

It may be that the same fix is needed for the other autogen.sh and/or
configure.ac files, but that hasn't been tested and therefore not in
this commit.

8 years agosrd: JTAG: Enavble and get/use optional probes.
Uwe Hermann [Thu, 10 May 2012 07:38:54 +0000 (09:38 +0200)]
srd: JTAG: Enavble and get/use optional probes.

8 years agosrd: Support for one or more optional probes.
Uwe Hermann [Thu, 10 May 2012 07:34:13 +0000 (09:34 +0200)]
srd: Support for one or more optional probes.

In the protocol decoder you always get all required probes, then _all_
optional probes in the list of probes in the decode() call.

Example:

 (r1, r2, r3, o1, o2, o3, o4) = pins

In this case r1-r3 are required probes, o1-o4 are optional probes.
However, the value of valid/used/specified probes will be 0 or 1,
whereas the value of probes that were not specified/assigned by the user
will be (at the moment) 42.

The PD can check for a valid probe like this:

  if p in (0, 1):
    ...

Or check for an invalid probe:

  if (p > 1):
    ...

The value of 42 could change to be -1 or None later.

8 years agosrd: Fix a few Doxygen errors.
Uwe Hermann [Tue, 8 May 2012 23:06:01 +0000 (01:06 +0200)]
srd: Fix a few Doxygen errors.

8 years agosrd: Add usable one-liner descriptions for all PDs.
Uwe Hermann [Tue, 8 May 2012 22:35:30 +0000 (00:35 +0200)]
srd: Add usable one-liner descriptions for all PDs.

8 years agosrd: Remove TODOs from annotation format names.
Uwe Hermann [Tue, 8 May 2012 21:53:48 +0000 (23:53 +0200)]
srd: Remove TODOs from annotation format names.

Also, fix minor consistency issues, cosmetics, typos.

8 years agosrd: JTAG/SMT32: Some more improvements.
Uwe Hermann [Sat, 5 May 2012 17:51:30 +0000 (19:51 +0200)]
srd: JTAG/SMT32: Some more improvements.

Add APB-AP register offsets/names, refactor and fix some code, handle
in/out APACC/DPACC better.

8 years agoFix bracket placing
Thomas Jarosch [Fri, 4 May 2012 08:18:22 +0000 (10:18 +0200)]
Fix bracket placing

Make it consistent with the rest of the code

Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
8 years agosrd: JTAG/STM32: Factor out dpacc_data_in/out.
Uwe Hermann [Thu, 3 May 2012 19:22:03 +0000 (21:22 +0200)]
srd: JTAG/STM32: Factor out dpacc_data_in/out.

Also, add a few code comments.

8 years agosrd: JTAG/STM32: Decode IDCODE[31:0] parts.
Uwe Hermann [Thu, 3 May 2012 17:19:01 +0000 (19:19 +0200)]
srd: JTAG/STM32: Decode IDCODE[31:0] parts.

8 years agosrd: JTAG: Also show the bitstrings in hex (for now).
Uwe Hermann [Wed, 2 May 2012 23:39:30 +0000 (01:39 +0200)]
srd: JTAG: Also show the bitstrings in hex (for now).

8 years agosrd: JTAG/STM32: Various improvements, fixes.
Uwe Hermann [Wed, 2 May 2012 23:39:16 +0000 (01:39 +0200)]
srd: JTAG/STM32: Various improvements, fixes.

Add APACC register handling, fix DPACC handling (esp. 'A' register size),
ouput a warning upon reserved DAPABORT bits being non-zero, implement
preliminary state machine, add various TODOs.

This is still work in progress, not yet finished or working properly.

8 years agosrd: Add initial JTAG/STM32 protocol decoder.
Uwe Hermann [Sat, 28 Apr 2012 17:24:57 +0000 (19:24 +0200)]
srd: Add initial JTAG/STM32 protocol decoder.

(not yet finished)

This protocol decoder can decode ST STM32 specific JTAG accesses, knows
about the STM32-specific registers and bits.

8 years agosrd: JTAG: Add some more docs.
Uwe Hermann [Sat, 28 Apr 2012 22:46:02 +0000 (00:46 +0200)]
srd: JTAG: Add some more docs.

8 years agosrd: JTAG: The TRST# (and SRST#) signals are optional.
Uwe Hermann [Sat, 28 Apr 2012 22:35:52 +0000 (00:35 +0200)]
srd: JTAG: The TRST# (and SRST#) signals are optional.

Don't handle them for now, will do this later.

8 years agosrd: jtag: Various bugfixes.
Uwe Hermann [Sat, 28 Apr 2012 17:24:14 +0000 (19:24 +0200)]
srd: jtag: Various bugfixes.

Most importantly, both TDI and TDO are sampled at the rising TCK edge,
and only upon transitions from SHIFT-DR to SHIFT-DR and SHIFT-IR to SHIFT-IR
are we to save the TDI/TDO values (if I understood this correcly).

Also, start out in RUN-TEST/IDLE state for now. This is useful if you
have JTAG dumps which start "in the middle" somewhere, not in the
TEST-LOGIC-RESET state. For full dumps, the JTAG software usually issues
five TMS=1 cycles to force the JTAG state machine into TEST-LOGIC-RESET
anyway, so this works fine too.

8 years agosrd: Add initial JTAG protocol decoder.
Uwe Hermann [Thu, 26 Apr 2012 20:51:26 +0000 (22:51 +0200)]
srd: Add initial JTAG protocol decoder.

This is unfinished, needs some more work.

8 years agosrd: lpc: Minor additions/fixes.
Uwe Hermann [Wed, 25 Apr 2012 16:44:50 +0000 (18:44 +0200)]
srd: lpc: Minor additions/fixes.

8 years agosrd: MXC6225XU: Bugfixes, add missing bits/registers.
Uwe Hermann [Sat, 21 Apr 2012 17:58:47 +0000 (19:58 +0200)]
srd: MXC6225XU: Bugfixes, add missing bits/registers.

8 years agosrd: Initial MEMSIC MXC6225XU protocol decoder.
Uwe Hermann [Thu, 19 Apr 2012 18:18:10 +0000 (20:18 +0200)]
srd: Initial MEMSIC MXC6225XU protocol decoder.

Not quite finished yet, but relatively close.

8 years agoInitial LPC protocol decoder implementation.
Uwe Hermann [Tue, 17 Apr 2012 21:28:12 +0000 (23:28 +0200)]
Initial LPC protocol decoder implementation.

This is unfinished and not tested, and probably not really working, yet.

8 years agosrd: Initial 0.1.0 release. libsigrokdecode-0.1.0
Uwe Hermann [Mon, 16 Apr 2012 22:12:56 +0000 (00:12 +0200)]
srd: Initial 0.1.0 release.

8 years agosr/srd: SR_API/SRD_API/etc. is a no-op on MinGW.
Uwe Hermann [Mon, 16 Apr 2012 21:16:00 +0000 (23:16 +0200)]
sr/srd: SR_API/SRD_API/etc. is a no-op on MinGW.

This avoids warnings on a MinGW build. The feature depends on ELF files,
but MinGW/Windows uses PE files.

8 years agosrd: Quickfix for MinGW build issue.
Uwe Hermann [Mon, 16 Apr 2012 21:10:26 +0000 (23:10 +0200)]
srd: Quickfix for MinGW build issue.

8 years agosrd: Add functions to query srd version(s).
Uwe Hermann [Sun, 15 Apr 2012 18:58:08 +0000 (20:58 +0200)]
srd: Add functions to query srd version(s).

8 years agosr/srd: Use/fix SR(D)_MAX_NUM_PROBES.
Uwe Hermann [Sat, 7 Apr 2012 16:14:39 +0000 (18:14 +0200)]
sr/srd: Use/fix SR(D)_MAX_NUM_PROBES.

8 years agosrd/i2s: Added links to documentation
Joel Holdsworth [Fri, 6 Apr 2012 21:29:31 +0000 (22:29 +0100)]
srd/i2s: Added links to documentation

8 years agosrd/i2s: Added sample-rate and bit-depth to report
Joel Holdsworth [Fri, 6 Apr 2012 21:01:30 +0000 (22:01 +0100)]
srd/i2s: Added sample-rate and bit-depth to report

8 years agosrd/i2s: Print a warning on receiving a malformed word
Joel Holdsworth [Fri, 6 Apr 2012 19:11:01 +0000 (20:11 +0100)]
srd/i2s: Print a warning on receiving a malformed word

8 years agosrd/i2s: Initial implementation
Joel Holdsworth [Fri, 6 Apr 2012 19:01:02 +0000 (20:01 +0100)]
srd/i2s: Initial implementation

8 years agosrd: Disable 'nunchuk' PD for now, it's unfinished.
Uwe Hermann [Sat, 31 Mar 2012 15:06:03 +0000 (17:06 +0200)]
srd: Disable 'nunchuk' PD for now, it's unfinished.

8 years agosrd: Decoders: Fix/simplify samplenum usage.
Uwe Hermann [Sat, 31 Mar 2012 15:04:50 +0000 (17:04 +0200)]
srd: Decoders: Fix/simplify samplenum usage.

8 years agosr/srd: Fix 'make distcheck'.
Uwe Hermann [Sat, 31 Mar 2012 10:09:37 +0000 (12:09 +0200)]
sr/srd: Fix 'make distcheck'.

8 years agosr/srd: Add ChangeLog to ignore list, it's generated.
Uwe Hermann [Sat, 31 Mar 2012 10:05:20 +0000 (12:05 +0200)]
sr/srd: Add ChangeLog to ignore list, it's generated.

8 years agosrd: Generate ChangeLog from git upon 'make dist'.
Uwe Hermann [Sat, 31 Mar 2012 09:38:38 +0000 (11:38 +0200)]
srd: Generate ChangeLog from git upon 'make dist'.

8 years agosrd: Add NEWS file.
Uwe Hermann [Sat, 31 Mar 2012 09:37:19 +0000 (11:37 +0200)]
srd: Add NEWS file.

8 years agosrd: SRD_PACKAGE_VERSION_* for consistency.
Uwe Hermann [Sat, 31 Mar 2012 09:31:14 +0000 (11:31 +0200)]
srd: SRD_PACKAGE_VERSION_* for consistency.

No need to use the LIBSIGROKDECODE_ prefix here when we use SRD_ everywhere
else. Also, better distinction between package version and lib version.

8 years agosrd: Some more (optional) consistency renames.
Uwe Hermann [Sun, 25 Mar 2012 13:08:16 +0000 (15:08 +0200)]
srd: Some more (optional) consistency renames.

8 years agosrd/cli/qt: Some more API consistency renames.
Uwe Hermann [Sun, 25 Mar 2012 12:49:11 +0000 (14:49 +0200)]
srd/cli/qt: Some more API consistency renames.

8 years agosrd: PDs: Kill obsolete 'longdesc' entries.
Uwe Hermann [Sun, 25 Mar 2012 07:39:44 +0000 (09:39 +0200)]
srd: PDs: Kill obsolete 'longdesc' entries.

8 years agosrd: Add .gitignore file.
Uwe Hermann [Sat, 24 Mar 2012 21:05:59 +0000 (22:05 +0100)]
srd: Add .gitignore file.

8 years agosrd: sigrokdecode.h: Add version macros.
Uwe Hermann [Sat, 24 Mar 2012 18:41:40 +0000 (19:41 +0100)]
srd: sigrokdecode.h: Add version macros.

8 years agosrd: Rename sigrokdecode.h to sigrokdecode.h.in.
Uwe Hermann [Sat, 24 Mar 2012 16:52:48 +0000 (17:52 +0100)]
srd: Rename sigrokdecode.h to sigrokdecode.h.in.

8 years agosrd: List 'report()' in all PDs for consistency.
Uwe Hermann [Sat, 24 Mar 2012 08:37:55 +0000 (09:37 +0100)]
srd: List 'report()' in all PDs for consistency.

8 years agosrd: Drop unused inputformats/outputformats entries.
Uwe Hermann [Wed, 21 Mar 2012 21:38:08 +0000 (22:38 +0100)]
srd: Drop unused inputformats/outputformats entries.

8 years agosr/srd: Remove API warnings from READMEs.
Uwe Hermann [Wed, 21 Mar 2012 21:33:51 +0000 (22:33 +0100)]
sr/srd: Remove API warnings from READMEs.

We'll have a libsigrok and a libsigrokdecode release soon. After that,
any API changes must be properly documented and reflected in the
SO version (and package version) numbers of the libs.

8 years agosrd: Drop ebr30a_i2c_demux in favor of i2cdemux.
Uwe Hermann [Wed, 21 Mar 2012 18:40:07 +0000 (19:40 +0100)]
srd: Drop ebr30a_i2c_demux in favor of i2cdemux.

The i2cdemux protocol decoder is the more generic version of the
obsolete ebr30a_i2c_demux decoder, and should be able (now or later) to do
everything that ebr30a_i2c_demux can do.

8 years agosr/srd: Small fixes, constifications, doc updates.
Uwe Hermann [Wed, 21 Mar 2012 18:28:43 +0000 (19:28 +0100)]
sr/srd: Small fixes, constifications, doc updates.

8 years agosr/cli/gtk/qt: Fix package version numbers / docs.
Uwe Hermann [Wed, 21 Mar 2012 17:40:25 +0000 (18:40 +0100)]
sr/cli/gtk/qt: Fix package version numbers / docs.

The next (and first) libsigrok release will be called 0.1.0.

The next (and first) libsigrokdecode release will be called 0.1.0.

The next sigrok-cli release will be called 0.3.0 (as we already had a 0.1
and 0.2 release of sigrok-cli; those did not yet use the libs, though).

sigrok-gtk and sigrok-qt didn't have any releases yet, so their version
numbers are set to 0.1.0.

Also, consistently use three numbers/digits for our version numbers.

8 years agosrd: srd_exit(): Set pd_list to NULL after freeing.
Uwe Hermann [Tue, 20 Mar 2012 17:02:45 +0000 (18:02 +0100)]
srd: srd_exit(): Set pd_list to NULL after freeing.

This will ensure that any subsequent checks for pd_list == NULL work
properly.

8 years agosrd/cli/qt: s/srd_session_feed/srd_session_send/.
Uwe Hermann [Tue, 20 Mar 2012 16:58:25 +0000 (17:58 +0100)]
srd/cli/qt: s/srd_session_feed/srd_session_send/.

8 years agosrd/cli/qt:s/decoders/decoder/ for consistency.
Uwe Hermann [Fri, 16 Mar 2012 14:25:53 +0000 (15:25 +0100)]
srd/cli/qt:s/decoders/decoder/ for consistency.

8 years agosrd: Constify lots more parameters.
Uwe Hermann [Fri, 16 Mar 2012 14:12:54 +0000 (15:12 +0100)]
srd: Constify lots more parameters.

8 years agosrd: Cosmetics, fix/add Doxygen comments.
Uwe Hermann [Thu, 15 Mar 2012 21:00:24 +0000 (22:00 +0100)]
srd: Cosmetics, fix/add Doxygen comments.

8 years agosrd: Fix typos.
Uwe Hermann [Sun, 18 Mar 2012 13:16:50 +0000 (14:16 +0100)]
srd: Fix typos.

8 years agosrd: Drop unused ARRAY_SIZE/ARRAY_AND_SIZE for now.
Uwe Hermann [Wed, 14 Mar 2012 21:12:08 +0000 (22:12 +0100)]
srd: Drop unused ARRAY_SIZE/ARRAY_AND_SIZE for now.

8 years agosrd: I2C: Update PD protocol docs.
Uwe Hermann [Sun, 4 Mar 2012 09:55:30 +0000 (10:55 +0100)]
srd: I2C: Update PD protocol docs.

8 years agosrd: PDs: More cosmetics.
Uwe Hermann [Sun, 4 Mar 2012 09:40:58 +0000 (10:40 +0100)]
srd: PDs: More cosmetics.

8 years agosrd: PDs: Use strings for states, too.
Uwe Hermann [Sun, 4 Mar 2012 09:13:29 +0000 (10:13 +0100)]
srd: PDs: Use strings for states, too.

8 years agosrd: PDs: Consistency/cosmetic fixes.
Uwe Hermann [Sat, 3 Mar 2012 13:39:14 +0000 (14:39 +0100)]
srd: PDs: Consistency/cosmetic fixes.

8 years agosr/srd: s/handler/callback/.
Uwe Hermann [Sat, 3 Mar 2012 13:13:21 +0000 (14:13 +0100)]
sr/srd: s/handler/callback/.

We should consistently use the same name for the same thing.

8 years agosr: Name all callback data 'cb_data'.
Uwe Hermann [Wed, 29 Feb 2012 21:32:34 +0000 (22:32 +0100)]
sr: Name all callback data 'cb_data'.

8 years agosr/srd: Consistency fixes for callbacks.
Uwe Hermann [Wed, 29 Feb 2012 20:56:24 +0000 (21:56 +0100)]
sr/srd: Consistency fixes for callbacks.

 - Callback function pointer typedefs end with _t.

 - Variables holding callback functions are named 'cb' everywhere.

8 years agosrd: I2C: change format to have ACK/NACK bits as separate events
Bert Vermeulen [Tue, 28 Feb 2012 13:33:45 +0000 (14:33 +0100)]
srd: I2C: change format to have ACK/NACK bits as separate events

8 years agosrd: fix SIGROKDECODE_DIR env variable brokenness
Bert Vermeulen [Tue, 28 Feb 2012 01:01:41 +0000 (02:01 +0100)]
srd: fix SIGROKDECODE_DIR env variable brokenness

8 years agosrd: properly return status code
Bert Vermeulen [Tue, 28 Feb 2012 00:16:29 +0000 (01:16 +0100)]
srd: properly return status code

8 years agosrd: PDs: Whitespace and cosmetics.
Uwe Hermann [Mon, 27 Feb 2012 23:42:45 +0000 (00:42 +0100)]
srd: PDs: Whitespace and cosmetics.

8 years agosrd: rename public API functions to srd_thing_action format
Bert Vermeulen [Tue, 14 Feb 2012 02:43:28 +0000 (03:43 +0100)]
srd: rename public API functions to srd_thing_action format

8 years agosrd: don't load all protocol decoders unless we really need to.
Bert Vermeulen [Tue, 14 Feb 2012 02:28:53 +0000 (03:28 +0100)]
srd: don't load all protocol decoders unless we really need to.

8 years agosrd: last public/private fix, and docs for all publis functions.
Bert Vermeulen [Sun, 12 Feb 2012 13:55:20 +0000 (14:55 +0100)]
srd: last public/private fix, and docs for all publis functions.

8 years agosrd: finish up public/private API
Bert Vermeulen [Sun, 12 Feb 2012 13:18:32 +0000 (14:18 +0100)]
srd: finish up public/private API

8 years agosrd: no public API functions use python-specific arguments now
Bert Vermeulen [Sun, 12 Feb 2012 12:47:07 +0000 (13:47 +0100)]
srd: no public API functions use python-specific arguments now

8 years agosrd: extra module path can now optionally be passed to srd_init()
Bert Vermeulen [Sun, 12 Feb 2012 03:07:22 +0000 (04:07 +0100)]
srd: extra module path can now optionally be passed to srd_init()

Also environment variable SIGROKDECODE_DIR, if present, is prepended
to the module path.

8 years agoRename 'void *' callback parameters to 'user_data'.
Uwe Hermann [Sat, 11 Feb 2012 21:09:18 +0000 (22:09 +0100)]
Rename 'void *' callback parameters to 'user_data'.

This is better, both for consistency reasons, and also because 'data' is
a bit too generic and might be confusing, especially since we have other
'data' fields in the code in various places.

8 years agosrd: Every callback should have a 'void *' parameter.
Uwe Hermann [Sat, 11 Feb 2012 21:38:17 +0000 (22:38 +0100)]
srd: Every callback should have a 'void *' parameter.

This is required in various situations and for various lib users,
especially so GUIs which might want to pass specific info via this
mechanism.

8 years agoUse g_try_malloc/g_free/g_strdup consistently.
Uwe Hermann [Sat, 11 Feb 2012 19:06:46 +0000 (20:06 +0100)]
Use g_try_malloc/g_free/g_strdup consistently.

Avoid plain malloc()/free() in sr/srd, especially in the API calls.
Also avoid g_malloc*() in favor of g_try_malloc*().

Use g_strdup() instead of strdup() so that we can use g_free()
consistently everywhere.

Exceptions: Stuff that is allocated via other libs (not using glib),
should also be properly free'd using the respective free-ing function
(instead of g_free()). Examples: Stuff allocated by libusb, libftdi, etc.

Also, use sr_err() instead of sr_warn() for actual errors. sr_warn() is
meant for non-fatal/uncritical warnings.

8 years agosrd: rename all instance to inst
Bert Vermeulen [Sat, 11 Feb 2012 17:06:56 +0000 (18:06 +0100)]
srd: rename all instance to inst

8 years agosrd: Update README.
Uwe Hermann [Fri, 10 Feb 2012 23:43:26 +0000 (00:43 +0100)]
srd: Update README.

8 years agosrd: s/python/Python/.
Uwe Hermann [Fri, 10 Feb 2012 08:29:38 +0000 (09:29 +0100)]
srd: s/python/Python/.

8 years agosrd: Add/improve g_malloc() error messages.
Uwe Hermann [Thu, 9 Feb 2012 23:06:58 +0000 (00:06 +0100)]
srd: Add/improve g_malloc() error messages.

8 years agosrd: Move private symbols to sigrokdecode-internal.h.
Uwe Hermann [Thu, 9 Feb 2012 18:17:54 +0000 (19:17 +0100)]
srd: Move private symbols to sigrokdecode-internal.h.

8 years agosrd: Add/use SRD_API/SRD_PRIV macros.
Uwe Hermann [Thu, 9 Feb 2012 18:11:53 +0000 (19:11 +0100)]
srd: Add/use SRD_API/SRD_PRIV macros.

This is not yet finished, more things should be made private.

8 years agosrd: Cosmetics, whitespace, coding-style fixes.
Uwe Hermann [Wed, 8 Feb 2012 21:39:30 +0000 (22:39 +0100)]
srd: Cosmetics, whitespace, coding-style fixes.

8 years agosrd: More consistent log related function names.
Uwe Hermann [Wed, 8 Feb 2012 18:52:43 +0000 (19:52 +0100)]
srd: More consistent log related function names.

Also, fix typos, constify some parameters, add more Doxygen comments.

8 years agoProject-wide consistent naming for #include guards.
Uwe Hermann [Sat, 4 Feb 2012 09:41:30 +0000 (10:41 +0100)]
Project-wide consistent naming for #include guards.

Document the naming scheme in HACKING.

8 years agoautogen.sh: aclocal support for Windows XP/Vista/7.
Uwe Hermann [Sun, 5 Feb 2012 11:54:44 +0000 (12:54 +0100)]
autogen.sh: aclocal support for Windows XP/Vista/7.

8 years agosrd: Add explicit srd_pd_output_callback_t typedef.
Uwe Hermann [Thu, 2 Feb 2012 08:28:56 +0000 (09:28 +0100)]
srd: Add explicit srd_pd_output_callback_t typedef.

8 years agosrd: Properly use append() for appending to lists.
Uwe Hermann [Wed, 1 Feb 2012 22:14:29 +0000 (23:14 +0100)]
srd: Properly use append() for appending to lists.

This is not only the canonical way to do it, it's also quite a bit faster
and less memory-intensive than using '+='.

8 years agosrd: Move all protocol docs to __init__.py files.
Uwe Hermann [Wed, 1 Feb 2012 21:23:03 +0000 (22:23 +0100)]
srd: Move all protocol docs to __init__.py files.

8 years agosrd: spi: Use strings for most options.
Uwe Hermann [Wed, 1 Feb 2012 20:57:43 +0000 (21:57 +0100)]
srd: spi: Use strings for most options.

8 years agosrd: uart: Use strings for most PD options.
Uwe Hermann [Wed, 1 Feb 2012 18:47:50 +0000 (19:47 +0100)]
srd: uart: Use strings for most PD options.

8 years agosrd: uart: Move protocol docs to __init__.py.
Uwe Hermann [Wed, 1 Feb 2012 18:24:21 +0000 (19:24 +0100)]
srd: uart: Move protocol docs to __init__.py.

8 years agosrd: uart: Add missing initialization.
Uwe Hermann [Wed, 1 Feb 2012 18:07:11 +0000 (19:07 +0100)]
srd: uart: Add missing initialization.