]> sigrok.org Git - libsigrokdecode.git/history - decoders
Doxyfile: Set version to 0.4.0.
[libsigrokdecode.git] / decoders /
2016-01-28 Daniel Thompsonuart: Optimize handling of samples when tx and rx are...
2016-01-28 Petteri Aimonenarm_itm: Use objdump instead of addr2line.
2015-12-25 Uwe Hermannusb_power_delivery: Raise SamplerateError instead of...
2015-12-24 Uwe HermannUse self.out_binary naming consistently across all...
2015-12-24 Uwe HermannUse a Python list (not tuple) for OUT_BINARY.
2015-12-18 Uwe Hermannem4100: Simplify the code a bit.
2015-12-18 Uwe Hermannem4100: Use ss/es naming for consistency across PDs.
2015-12-18 Uwe Hermannem4100: Eliminate some unnecessary int()s.
2015-12-18 Uwe Hermannem4100: Change annotation setup a bit, decode more...
2015-12-18 Benjamin LarssonAdd RFID EM4100 protocol decoding
2015-12-16 Uwe Hermannusb_power_delivery: Use "if not self.samplerate" form.
2015-12-16 Vincent Palatinusb_power_delivery: convert double quotes to single...
2015-12-04 Uwe Hermannusb*: Minor cosmetics.
2015-12-01 Stefan Brünsusb_signalling: detect PREamble PID
2015-12-01 Stefan Brünsusb_signalling: add signaling states needed after LS...
2015-12-01 Stefan Brünsusb_{packet,request}: handle PREamble transmissions
2015-11-29 Stefan Brünsusb_signalling: fix SOP detection after an error condition
2015-11-29 Stefan Brünsusb_packet: handle errors from usb_signalling
2015-11-29 Stefan Brünsusb_request: Handle transmission timeouts
2015-11-29 Stefan Brünsusb_signalling: add option to automatically set signall...
2015-11-29 Stefan Brünsusb_signalling: decode RESET and Keep-Alive signalling...
2015-11-29 Stefan Brünsusb_signalling: use explicit positions for packet start/end
2015-11-29 Stefan Brünsusb_signalling: handle symbol errors in EOP state
2015-11-29 Stefan Brünsusb_signalling: remove unneeded syms array
2015-11-29 Stefan Brünsusb_signalling: remove unused ss_sop member
2015-11-29 Stefan Brünsusb_signalling: detect bit stuffing errors
2015-11-29 Stefan Brünsusb_signalling: consolidate symbol output
2015-11-22 Paul "LeoNerd" Evansspi: Add a 'TRANSFER' output type.
2015-11-22 Paul "LeoNerd" EvansFix documentation comment in SPI decoder
2015-11-21 Uwe Hermannusb_power_delivery: Minor typo and whitespace fixes.
2015-11-21 Uwe Hermannusb_power_delivery: Use the same license header format...
2015-11-21 Vincent PalatinUSB Power Delivery protocol decoder
2015-11-21 Uwe Hermannspiflash: Fix incorrect 'inputs' field.
2015-11-12 Paul "LeoNerd" EvansInitial attempt at MAX7219/MAX7221 decoder
2015-10-22 ElrondUART: Handle framing errors better
2015-10-06 Stefan Brünsusb_request: USB transaction decoder and PCAP generator
2015-10-06 Uwe Hermannusb_packet: Document CRC5 ERROR and CRC16 ERROR packets.
2015-10-06 Uwe Hermannusb_{signalling,packet}: Minor cosmetics.
2015-10-06 Stefan Brünsusb_signalling: Track USB symbol width to compensate...
2015-10-06 Stefan Brünsusb_packet: calculate and check CRC5/CRC16
2015-10-06 Roland Hieberrfm12: fix small typo
2015-09-15 Daniel Elstnerjitter, pwm: Avoid Unicode string literals
2015-09-14 Uwe Hermanncan: Improve stuff bit annotation placement.
2015-09-14 Uwe Hermanncan: Emit bit value annotations.
2015-09-03 Uwe Hermannjtag_stm32: Decode IDCODE contents as strings (not...
2015-09-03 Uwe Hermannjtag_stm32: Decode more fields, improve IDCODE handling.
2015-09-03 Uwe Hermannjtag_stm32: Cleanups, shorter code.
2015-09-03 Uwe Hermannjtag_stm32: Update to reflect change in jtag OUT_PYTHON.
2015-09-03 Uwe Hermannjtag: Submit bit samplenumbers together with the bits.
2015-09-03 Uwe Hermannjtag_stm32: Fix incorrect handling of registers.
2015-09-03 Uwe Hermannjtag: Add more annotations, fix a SHIFT-IR/-DR issue.
2015-09-03 Uwe Hermannjtag: Fix/enable OUT_PYTHON output.
2015-08-21 Uwe Hermannnunchuk: Fix inverted button press logic.
2015-08-18 Uwe Hermannmrf24j40: Fix a register address typo.
2015-08-17 Uwe Hermanntlc5620: Add options for per-DAC Vref, show voltages.
2015-08-17 Uwe Hermanntlc5620: Handle the case of less than 11 bits in a...
2015-08-17 Uwe Hermanntlc5620: Properly handle LOAD and LDAC based operations.
2015-08-17 Uwe Hermanntlc5620: Only decode the last 11 bits, ignore the rest.
2015-08-17 Uwe Hermanntlc5620: Fix incorrect DAC selection decode, add more...
2015-08-14 Uwe Hermannusb_packet: Handle invalid packets more gracefully.
2015-08-14 Uwe Hermannusb_packet: Fix incorrect DATA*/MDATA handling.
2015-08-06 Uwe HermannAdd initial SD card (SD mode) decoder.
2015-07-18 Bart de WaalAdd protocol decoder for Modbus RTU.
2015-07-10 Josef Gajdusekqi: Add Qi charger protocol decoder
2015-07-09 Aurelien JacobsAdd an MDIO/SMI decoder.
2015-06-30 Uwe Hermannadns5020: Minor tweak to annotation format.
2015-06-30 Uwe Hermannmrf24j40: Factor out register lists to lists.py.
2015-06-30 Karl PalssonAdd a Microchip MRF24J40 802.15.4 2.4GHz RF tranceiver...
2015-06-22 Uwe Hermannadns5020: Add manufacturer name to description.
2015-06-19 Karl PalssonAdd Avago ADNS-5020 optical mouse sensor decoder.
2015-06-16 Karl Palssonam23xx: explicitly mention RHTxx devices.
2015-04-26 Uwe Hermanntiming: Shorten annotations (time units).
2015-04-26 Baruch EvenAdd a decoder that calculates timings between transitions.
2015-04-07 Uwe Hermannspiflash: Add lists.py and a 'chips' PD option.
2015-04-07 Uwe HermannRename the 'mx25lxx05d' PD to 'spiflash'.
2015-04-07 Uwe HermannFix a bunch of typos.
2015-04-03 Uwe Hermannonewire_link: Fix a bug when the samplerate is too...
2015-04-03 Andreas Sandbergspi: Don't decode data lines if CS isn't asserted
2015-04-02 Uwe HermannSlightly shorten a few PD descriptions.
2015-04-02 Petteri AimonenAdd a decoder for stepper motor direction/speed signals.
2015-04-02 Petteri AimonenFix a few decoding bugs with arm_etmv3.
2015-04-02 Matt Porterpwm: add period annotation
2015-03-25 Uwe Hermannmx25lxx05d: Implement FAST READ command.
2015-03-02 Petteri AimonenFix typo in swd decoder
2015-03-02 Petteri AimonenAdd ARM TPIU/ITM/ETMv3 decoders
2015-02-24 Uwe Hermannnrf24l01: Change 'xn297_extensions' option to 'chip'.
2015-02-24 Mikenrf24l01: Add option to support the XN297's extra registers
2015-02-17 Petteri AimonenImprove uart decoder sample positions at high data...
2014-12-28 Uwe HermannAdd 24xx I2C EEPROM protocol decoder.
2014-12-28 Uwe Hermannspi: Add binary output facilities for MISO/MOSI.
2014-12-16 Bert Vermeulenedid: Add annotation rows.
2014-12-16 Bert Vermeuleneded: Add all sections.
2014-11-23 Uwe Hermannjitter: Simplify ascii-float binary out.
2014-11-23 Uwe Hermannjitter: Rename "jitter" binary out to "ascii-float".
2014-11-23 Sebastien Bourdelinjitter: add a binary output to report the raw jitter...
2014-11-23 Sebastien Bourdelinjitter: fixes an error when a miss clock/signal is...
2014-11-09 Uwe Hermannjitter: Factor out handle_clk() and handle_sig().
2014-11-09 Sebastien BourdelinAdd a timing jitter decoder.
2014-11-02 Sebastien Bourdelinpwm: Fix and rework
2014-10-19 Jens Steinhauserspi: Use 'None' to signal the missing CS# pin.
next