From: Stefan Brüns <redacted>
Date: Mon, 17 Jun 2019 17:51:29 +0000 (+0200)
Subject: usb_request: Fix some decoding errors
X-Git-Url: https://sigrok.org/gitweb/?p=libsigrokdecode.git;a=commitdiff_plain;h=7c4029417cbdd12fdbfbd2a94107e215c1eaa605

usb_request: Fix some decoding errors

Append OUT data only if it has been ACKed. OUT transfers (BULK OUT or
CONTROL transfer DATA stage) are typically NACKed to create backpressure.

Always keep IN and OUT transfers separate. On the physical layer, the
endpoint number only uses 4 bits, and IN and OUT use separate tokens.
In case the transfer is an IN transfer, set the high bit as used in the
endpoint descriptors (i.e. 0x81 is IN enpoint 1, 0x01 is OUT endpoint 1).
---

diff --git a/decoders/usb_request/pd.py b/decoders/usb_request/pd.py
index 49b0b35..25ee4c5 100644
--- a/decoders/usb_request/pd.py
+++ b/decoders/usb_request/pd.py
@@ -211,7 +211,8 @@ class Decoder(srd.Decoder):
             self.handle_request(request_started, request_end)
         elif request['type'] in (None, 'BULK OUT') and self.transaction_type == 'OUT':
             request['type'] = 'BULK OUT'
-            request['data'] += self.transaction_data
+            if self.handshake == 'ACK':
+                request['data'] += self.transaction_data
             self.handle_request(request_started, request_end)
 
         # CONTROL, SETUP stage
@@ -231,7 +232,8 @@ class Decoder(srd.Decoder):
             request['data'] += self.transaction_data
 
         elif request['type'] == 'SETUP OUT' and self.transaction_type == 'OUT':
-            request['data'] += self.transaction_data
+            if self.handshake == 'ACK':
+                request['data'] += self.transaction_data
             if request['wLength'] == len(request['data']):
                 self.handle_request(1, 0)
 
@@ -339,6 +341,8 @@ class Decoder(srd.Decoder):
             self.es_transaction = es
             self.transaction_state = 'TOKEN RECEIVED'
             self.transaction_ep = ep
+            if ep > 0 and pname == 'IN':
+                self.transaction_ep = ep + 0x80
             self.transaction_addr = addr
             self.transaction_type = pname # IN OUT SETUP