From: Uwe Hermann <redacted>
Date: Sun, 6 Feb 2011 16:29:44 +0000 (+0100)
Subject: Python decoders: Add more metadata.
X-Git-Tag: libsigrokdecode-0.1.0~290
X-Git-Url: https://sigrok.org/gitweb/?p=libsigrokdecode.git;a=commitdiff_plain;h=4ed59136f8033c2cb745302bfd42d359c541e64b

Python decoders: Add more metadata.

Make the list of metadata info match the spec in the wiki more closely.
---

diff --git a/decoders/i2c.py b/decoders/i2c.py
index bbf6925..4e11921 100644
--- a/decoders/i2c.py
+++ b/decoders/i2c.py
@@ -237,13 +237,23 @@ def register():
 	return {
 		'id': 'i2c',
 		'name': 'I2C',
-		'desc': 'Inter-Integrated Circuit (I2C) bus',
-		'inputformats': ['raw'],
-		'signalnames':  {
-				'SCL': 'Serial clock line',
-				'SDA': 'Serial data line',
-				},
-		'outputformats': ['i2c'],
+		'longname': 'Inter-Integrated Circuit (I2C) bus',
+		'desc': 'I2C is a two-wire, multi-master, serial bus.',
+		'longdesc': '...',
+		'author': 'Uwe Hermann',
+		'email': 'uwe@hermann-uwe.de',
+		'license': 'gplv2+',
+		'in': ['logic'],
+		'out': ['i2c'],
+		'probes': [
+			['scl', 'Serial clock line'],
+			['sda', 'Serial data line'],
+		],
+		'options': {
+			'address-space': ['Address space (in bits)', 7],
+		},
+		# 'start': start,
+		# 'report': report,
 	}
 
 # Use psyco (if available) as it results in huge performance improvements.
diff --git a/decoders/nunchuk.py b/decoders/nunchuk.py
index 409e120..77b154e 100644
--- a/decoders/nunchuk.py
+++ b/decoders/nunchuk.py
@@ -143,9 +143,22 @@ def register():
 	return {
 		'id': 'nunchuk',
 		'name': 'Nunchuk',
-		'desc': 'Nintendo Wii Nunchuk decoder',
-		'inputformats': ['i2c'],
-		'ouputformats': ['nunchuk'],
+		'longname': 'Nintendo Wii Nunchuk decoder',
+		'desc': 'Decodes the Nintendo Wii Nunchuk I2C-based protocol.',
+		'longdesc': '...',
+		'author': 'Uwe Hermann',
+		'email': 'uwe@hermann-uwe.de',
+		'license': 'gplv2+',
+		'in': ['i2c'],
+		'out': ['nunchuck'],
+		'probes': [
+			# TODO
+		],
+		'options': {
+			# TODO
+		},
+		# 'start': start,
+		# 'report': report,
 	}
 
 # Use psyco (if available) as it results in huge performance improvements.
diff --git a/decoders/transitioncounter.py b/decoders/transitioncounter.py
index a6d331e..6bd97c2 100644
--- a/decoders/transitioncounter.py
+++ b/decoders/transitioncounter.py
@@ -79,10 +79,22 @@ def register():
 	return {
 		'id': 'transitioncounter',
 		'name': 'Transition counter',
-		'desc': 'Count rising/falling edges',
-		'inputformats': ['raw'],
-		'signalnames': {}, # FIXME
-		'outputformats': ['transitioncounts'],
+		'longname': '...',
+		'desc': 'Counts rising/falling edges in the signal.',
+		'longdesc': '...',
+		'author': 'Uwe Hermann',
+		'email': 'uwe@hermann-uwe.de',
+		'license': 'gplv2+',
+		'in': ['logic'],
+		'out': ['transitioncounts'],
+		'probes': [
+			# All probes.
+		],
+		'options': {
+			# No options so far.
+		},
+		# 'start': start,
+		# 'report': report,
 	}
 
 # Use psyco (if available) as it results in huge performance improvements.