From: Angus Gratton Date: Sat, 12 Jul 2014 09:34:19 +0000 (+1000) Subject: swd: Add SWD protocol decoder for ARM Serial Wire Debug format. X-Git-Tag: libsigrokdecode-0.4.0~161 X-Git-Url: https://sigrok.org/gitweb/?p=libsigrokdecode.git;a=commitdiff_plain;h=4afe40462af650a0df1bfb7bd185ee666f2b30f0;hp=25adf5cf29d26751d3f481bd2d22fe8d034ed44c;ds=sidebyside swd: Add SWD protocol decoder for ARM Serial Wire Debug format. Supports annotated output for analysing debug sessions, Python output for potential stacked decoders looking at higher level debug operations. --- diff --git a/decoders/swd/__init__.py b/decoders/swd/__init__.py new file mode 100644 index 0000000..e6da908 --- /dev/null +++ b/decoders/swd/__init__.py @@ -0,0 +1,35 @@ +## +## This file is part of the libsigrokdecode project. +## +## Copyright (C) 2014 Angus Gratton +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +''' +This PD decodes the ARM SWD (version 1) protocol, as described in the +"ARM Debug Interface v5.2" Architecture Specification. + +Details: +http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ihi0031c/index.html +(Registration required) + +Not supported: + * Turnaround periods other than the default 1, as set in DLCR.TURNROUND + (should be trivial to add) + * SWD protocol version 2 (multi-drop support, etc.) +''' + +from .pd import * diff --git a/decoders/swd/pd.py b/decoders/swd/pd.py new file mode 100644 index 0000000..4e68f2d --- /dev/null +++ b/decoders/swd/pd.py @@ -0,0 +1,356 @@ +## +## This file is part of the libsigrokdecode project. +## +## Copyright (C) 2014 Angus Gratton +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +import sigrokdecode as srd +import re, traceback + +''' +OUTPUT_PYTHON format: + +Packet: +[, ] + +: + - 'AP_READ' (AP read) + - 'DP_READ' (DP read) + - 'AP_WRITE' (AP write) + - 'DP_WRITE' (DP write) + - 'LINE_RESET' (line reset sequence) + +: + - tuple of address, ack state, data for the given sequence +''' + +swd_states = [ + 'IDLE', # Idle/unknown + 'REQUEST', # Request phase (first 8 bits) + 'ACK', # Ack phase (next 3 bits) + 'READ', # Reading phase (next 32 bits for reads) + 'WRITE', # Writing phase (next 32 bits for write) + 'DPARITY', # Data parity phase +] + +# Regexes for matching SWD data out of bitstring ('1' / '0' characters) format +RE_SWDSWITCH = re.compile(bin(0xE79E)[:1:-1] + '$') +RE_SWDREQ = re.compile(r'1(?P.)(?P.)(?P..)(?P.)01$') +RE_IDLE = re.compile('0' * 50 + '$') + +# Sample edges +RISING = 1 +FALLING = 0 + +ADDR_DP_SELECT = 0x8 +ADDR_DP_CTRLSTAT = 0x4 + +BIT_SELECT_CTRLSEL = 1 +BIT_CTRLSTAT_ORUNDETECT = 1 + +ANNOTATIONS = ['reset', 'enable', 'read', 'write', 'ack', 'data', 'parity'] + +class Decoder(srd.Decoder): + api_version = 2 + id = 'swd' + name = 'SWD' + longname = 'Serial Wire Debug' + desc = 'Two-wire protocol for debug access to ARM CPUs.' + license = 'gplv2+' + inputs = ['logic'] + outputs = ['swd'] + channels = ( + {'id': 'swclk', 'name': 'SWCLK', 'desc': 'Master clock'}, + {'id': 'swdio', 'name': 'SWDIO', 'desc': 'Data input/output'}, + ) + options = ( + {'id': 'strict_start', + 'desc': 'Wait for a line reset before starting to decode', + 'default': 'no', 'values': ('yes', 'no')}, + ) + annotations = ( + ('reset', 'RESET'), + ('enable', 'ENABLE'), + ('read', 'READ'), + ('write', 'WRITE'), + ('ack', 'ACK'), + ('data', 'DATA'), + ('parity', 'PARITY'), + ) + + def __init__(self, **kwargs): + # SWD data/clock state + self.state = 'UNKNOWN' + self.oldclk = -1 + self.sample_edge = RISING + self.ack = None # Ack state of the current phase + self.ss_req = 0 # Start sample of current req + self.turnaround = 0 # Number of turnaround edges to ignore before continuing + self.bits = '' # Bits from SWDIO are accumulated here, matched against expected sequences + self.samplenums = [] # Sample numbers that correspond to the samples in self.bits + self.linereset_count = 0 + + # SWD debug port state + self.data = None + self.addr = None + self.rw = None # Are we inside an SWD read or a write? + self.ctrlsel = 0 # 'ctrlsel' is bit 0 in the SELECT register. + self.orundetect = 0 # 'orundetect' is bit 0 in the CTRLSTAT register. + + def start(self): + self.out_ann = self.register(srd.OUTPUT_ANN) + self.out_python = self.register(srd.OUTPUT_PYTHON) + if self.options['strict_start'] == 'no': + self.state = 'REQ' # No need to wait for a LINE RESET. + + def putx(self, ann, length, data): + '''Output annotated data.''' + ann = ANNOTATIONS.index(ann) + try: + ss = self.samplenums[-length] + except IndexError: + ss = self.samplenums[0] + if self.state == 'REQ': + self.ss_req = ss + es = self.samplenum + self.put(ss, es, self.out_ann, [ann, [data]]) + + def putp(self, ptype, pdata): + self.put(self.ss_req, self.samplenum, self.out_python, [ptype, pdata]) + + def put_python_data(self): + '''Emit Python data item based on current SWD packet contents.''' + ptype = { + ('AP', 'R'): 'AP_READ', + ('AP', 'W'): 'AP_WRITE', + ('DP', 'R'): 'DP_READ', + ('DP', 'W'): 'DP_WRITE', + }[(self.apdp, self.rw)] + self.putp(ptype, (self.addr, self.data, self.ack)) + + def decode(self, ss, es, data): + try: + return self._decode(ss, es, data) + except: + traceback.print_exc() + raise + + def _decode(self, ss, es, data): + for (self.samplenum, (clk, dio)) in data: + if clk == self.oldclk: + continue # Not a clock edge. + self.oldclk = clk + + # Count rising edges with DIO held high, + # as a line reset (50+ high edges) can happen from any state. + if clk == RISING: + if dio == 1: + self.linereset_count += 1 + else: + if self.linereset_count >= 50: + self.putx('reset', self.linereset_count, 'LINERESET') + self.putp('LINE_RESET', None) + self.reset_state() + self.linereset_count = 0 + + # Otherwise, we only care about either rising or falling edges + # (depending on sample_edge, set according to current state). + if clk != self.sample_edge: + continue + + # Turnaround bits get skipped. + if self.turnaround > 0: + self.turnaround -= 1 + continue + + self.bits += str(dio) + self.samplenums.append(self.samplenum) + { + 'UNKNOWN': self.handle_unknown_edge, + 'REQ': self.handle_req_edge, + 'ACK': self.handle_ack_edge, + 'DATA': self.handle_data_edge, + 'DPARITY': self.handle_dparity_edge, + }[self.state]() + + def next_state(self): + '''Step to the next SWD state, reset internal counters accordingly.''' + self.bits = '' + self.samplenums = [] + self.linereset_count = 0 + if self.state == 'UNKNOWN': + self.state = 'REQ' + self.sample_edge = RISING + self.turnaround = 0 + elif self.state == 'REQ': + self.state = 'ACK' + self.sample_edge = FALLING + self.turnaround = 1 + elif self.state == 'ACK': + self.state = 'DATA' + self.sample_edge = RISING if self.rw == 'W' else FALLING + self.turnaround = 0 if self.rw == 'R' else 2 + elif self.state == 'DATA': + self.state = 'DPARITY' + elif self.state == 'DPARITY': + self.put_python_data() + self.state = 'REQ' + self.sample_edge = RISING + self.turnaround = 1 if self.rw == 'R' else 0 + + def reset_state(self): + '''Line reset (or equivalent), wait for a new pending SWD request.''' + if self.state != 'REQ': # Emit a Python data item. + self.put_python_data() + # Clear state. + self.bits = '' + self.samplenums = [] + self.linereset_count = 0 + self.turnaround = 0 + self.sample_edge = RISING + self.data = '' + self.ack = None + self.state = 'REQ' + + def handle_unknown_edge(self): + ''' + Clock edge in the UNKNOWN state. + In the unknown state, clock edges get ignored until we see a line + reset (which is detected in the decode method, not here.) + ''' + pass + + def handle_req_edge(self): + '''Clock edge in the REQ state (waiting for SWD r/w request).''' + # Check for a JTAG->SWD enable sequence. + m = re.search(RE_SWDSWITCH, self.bits) + if m is not None: + self.putx('enable', 16, 'JTAG->SWD') + self.reset_state() + return + + # Or a valid SWD Request packet. + m = re.search(RE_SWDREQ, self.bits) + if m is not None: + calc_parity = sum([int(x) for x in m.group('rw') + m.group('apdp') + m.group('addr')]) % 2 + parity = '' if str(calc_parity) == m.group('parity') else 'E' + self.rw = 'R' if m.group('rw') == '1' else 'W' + self.apdp = 'AP' if m.group('apdp') == '1' else 'DP' + self.addr = int(m.group('addr')[::-1], 2) << 2 + self.putx('read' if self.rw == 'R' else 'write', 8, self.get_address_description()) + self.next_state() + return + + def handle_ack_edge(self): + '''Clock edge in the ACK state (waiting for complete ACK sequence).''' + if len(self.bits) < 3: + return + if self.bits == '100': + self.putx('ack', 3, 'OK') + self.ack = 'OK' + self.next_state() + elif self.bits == '001': + self.putx('ack', 3, 'FAULT') + self.ack = 'FAULT' + if self.orundetect == 1: + self.next_state() + else: + self.reset_state() + self.turnaround = 1 + elif self.bits == '010': + self.putx('ack', 3, 'WAIT') + self.ack = 'WAIT' + if self.orundetect == 1: + self.next_state() + else: + self.reset_state() + self.turnaround = 1 + elif self.bits == '111': + self.putx('ack', 3, 'NOREPLY') + self.ack = 'NOREPLY' + self.reset_state() + else: + self.putx('ack', 3, 'ERROR') + self.ack = 'ERROR' + self.reset_state() + + def handle_data_edge(self): + '''Clock edge in the DATA state (waiting for 32 bits to clock past).''' + if len(self.bits) < 32: + return + self.data = 0 + self.dparity = 0 + for x in range(32): + if self.bits[x] == '1': + self.data += (1 << x) + self.dparity += 1 + self.dparity = self.dparity % 2 + + self.putx('data', 32, '0x%08x' % self.data) + self.next_state() + + def handle_dparity_edge(self): + '''Clock edge in the DPARITY state (clocking in parity bit).''' + if str(self.dparity) != self.bits: + self.putx('parity', 1, str(self.dparity) + self.bits) # PARITY ERROR + elif self.rw == 'W': + self.handle_completed_write() + self.next_state() + + def handle_completed_write(self): + ''' + Update internal state of the debug port based on a completed + write operation. + ''' + if self.apdp != 'DP': + return + elif self.addr == ADDR_DP_SELECT: + self.ctrlsel = self.data & BIT_SELECT_CTRLSEL + elif self.addr == ADDR_DP_CTRLSTAT and self.ctrlsel == 0: + self.orundetect = self.data & BIT_CTRLSTAT_ORUNDETECT + + def get_address_description(self): + ''' + Return a human-readable description of the currently selected address, + for annotated results. + ''' + if self.apdp == 'DP': + if self.rw == 'R': + # Tables 2-4 & 2-5 in ADIv5.2 spec ARM document IHI 0031C + return { + 0: 'IDCODE', + 0x4: 'R CTRL/STAT' if self.ctrlsel == 0 else 'R DLCR', + 0x8: 'RESEND', + 0xC: 'RDBUFF' + }[self.addr] + elif self.rw == 'W': + # Tables 2-4 & 2-5 in ADIv5.2 spec ARM document IHI 0031C + return { + 0: 'W ABORT', + 0x4: 'W CTRL/STAT' if self.ctrlsel == 0 else 'W DLCR', + 0x8: 'W SELECT', + 0xC: 'W RESERVED' + }[self.addr] + elif self.apdp == 'AP': + if self.rw == 'R': + return 'W AP%x' % self.addr + elif self.rw == 'W': + return 'W AP%x' % self.addr + + # Any legitimate operations shouldn't fall through to here, probably + # a decoder bug. + return '? %s%s%x' % (self.rw, self.apdp, self.addr)