From: Uwe Hermann Date: Sun, 11 Apr 2010 19:44:12 +0000 (+0200) Subject: First attempt at an I2C decoder (untested). X-Git-Tag: libsigrokdecode-0.1.0~343 X-Git-Url: https://sigrok.org/gitweb/?p=libsigrokdecode.git;a=commitdiff_plain;h=0588ed702725edbb5ed37ceb63fced93a5e68251 First attempt at an I2C decoder (untested). --- diff --git a/decode.c b/decode.c index de37913..d489068 100644 --- a/decode.c +++ b/decode.c @@ -35,9 +35,9 @@ int sigrokdecode_init(void) /* Allows for ./gui/sigrok-gui in the top-level directory. */ PySys_SetPath("libsigrokdecode/scripts"); /* Allows for ./sigrok-gui in the gui/ directory. */ - PySys_SetPath("../libsigrokdecode/scripts"); + // PySys_SetPath("../libsigrokdecode/scripts"); /* Allows for sigrok-gui from anywhere given sigrok is installed. */ - PySys_SetPath("/usr/local/share/sigrok"); + // PySys_SetPath("/usr/local/share/sigrok"); return 0; } @@ -71,7 +71,8 @@ int sigrokdecode_run_decoder(const char *decodername, uint8_t *inbuf, uint64_t inbuflen, uint8_t **outbuf, uint64_t *outbuflen) { - const char *decoder_filename = "transitioncounter"; /* FIXME */ + // const char *decoder_filename = "transitioncounter"; /* FIXME */ + const char *decoder_filename = "i2c"; /* FIXME */ PyObject *py_name, *py_module, *py_func, *py_args; PyObject *py_value, *py_result; int ret; diff --git a/scripts/i2c.py b/scripts/i2c.py new file mode 100644 index 0000000..f7022f5 --- /dev/null +++ b/scripts/i2c.py @@ -0,0 +1,164 @@ +## +## This file is part of the sigrok project. +## +## Copyright (C) 2010 Uwe Hermann +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# +# I2C protocol decoder +# + +# +# The Inter-Integrated Circuit (I2C) bus is a bidirectional, multi-master +# bus using two signals (SCL = serial clock line, SDA = serial data line). +# +# There can be many devices on the same bus. Each device can potentially be +# master or slave (and that can change during runtime). Both slave and master +# can potentially play the transmitter or receiver role (this can also +# change at runtime). +# +# Possible maximum data rates: +# - Standard mode: 100 kbit/s +# - Fast mode: 400 kbit/s +# - Fast-mode Plus: 1 Mbit/s +# - High-speed mode: 3.4 Mbit/s +# +# START condition (S): SDA = falling, SCL = high +# Repeated START condition (Sr): same as S +# STOP condition (P): SDA = rising, SCL = high +# +# All data bytes on SDA are extactly 8 bits long (transmitted MSB-first). +# Each byte has to be followed by a 9th ACK/NACK bit. If that bit is low, +# that indicates an ACK, if it's high that indicates a NACK. +# +# After the first START condition, a master sends the device address of the +# slave it wants to talk to. Slave addresses are 7 bits long (MSB-first). +# After those 7 bits a data direction bit is sent. If the bit is low that +# indicates a WRITE operation, if it's high that indicates a READ operation. +# +# Later an optional 10bit slave addressing scheme was added. +# +# Documentation: +# http://www.nxp.com/acrobat/literature/9398/39340011.pdf (v2.1 spec) +# http://www.nxp.com/acrobat/usermanuals/UM10204_3.pdf (v3 spec) +# http://en.wikipedia.org/wiki/I2C +# + +# TODO: Look into arbitration, collision detection, clock synchronisation, etc. +# TODO: Handle clock stretching. +# TODO: Handle combined messages / repeated START. +# TODO: Implement support for 7bit and 10bit slave addresses. +# TODO: Implement support for inverting SDA/SCL levels (0->1 and 1->0). +# TODO: Implement support for detecting various bus errors. + +# TODO: Return two buffers, one with structured data for the GUI to parse +# and display, and one with human-readable ASCII output. + +def sigrokdecode_i2c(inbuf): + """I2C protocol decoder""" + + # FIXME: This should be passed in as metadata, not hardcoded here. + signals = (2, 5) + channels = 8 + + o = wr = ack = d = '' + bitcount = data = 0 + state = 'IDLE' + + # Get the bit number (and thus probe index) of the SCL/SDA signals. + scl_bit, sda_bit = signals + + # Get SCL/SDA bit values (0/1 for low/high) of the first sample. + s = ord(inbuf[0]) + oldscl = (s & (1 << scl_bit)) != 0 + oldsda = (s & (1 << sda_bit)) != 0 + + # Loop over all samples. + # TODO: Handle LAs with more/less than 8 channels. + for samplenum, s in enumerate(inbuf[1:]): # We skip the first byte... + + s = ord(s) # FIXME + + # Get SCL/SDA bit values (0/1 for low/high). + scl = (s & (1 << scl_bit)) != 0 + sda = (s & (1 << sda_bit)) != 0 + + # TODO: Wait until the bus is idle (SDA = SCL = 1) first? + + # START condition (S): SDA = falling, SCL = high + if (oldsda == 1 and sda == 0) and scl == 1: + o += "%d\t\tSTART\n" % samplenum + state = 'ADDRESS' + bitcount = data = 0 + + # Data latching by transmitter: SCL = low + elif (scl == 0): + pass # TODO + + # Data sampling of receiver: SCL = rising + elif (oldscl == 0 and scl == 1): + bitcount += 1 + + # o += "%d\t\tRECEIVED BIT %d: %d\n" % \ + # (samplenum, 8 - bitcount, sda) + + # Address and data are transmitted MSB-first. + data <<= 1 + data |= sda + + if bitcount != 9: + continue + + # We received 8 address/data bits and the ACK/NACK bit. + data >>= 1 # Shift out unwanted ACK/NACK bit here. + o += "%d\t\t%s: " % (samplenum, state) + ack = (sda == 1) and 'NACK' or 'ACK' + d = (state == 'ADDRESS') and (data & 0xfe) or data + wr = '' + if state == 'ADDRESS': + wr = (data & 1) and ' (W)' or ' (R)' + state = 'DATA' + o += "0x%02x%s (%s)\n" % (d, wr, ack) + bitcount = data = 0 + + # STOP condition (P): SDA = rising, SCL = high + elif (oldsda == 0 and sda == 1) and scl == 1: + o += "%d\t\tSTOP\n" % samplenum + state = 'IDLE' + + # Save current SDA/SCL values for the next round. + oldscl = scl + oldsda = sda + + return o + +# This is just a draft. +def sigrokdecode_register_i2c(): + metadata = { + 'id': 'i2c', + 'name': 'I2C', + 'description': 'Inter-Integrated Circuit (I2C) bus', + 'function': 'sigrokdecode_i2c', + 'inputformats': ['raw'], + 'signalnames': { + 'SCL': 'Serial clock line', + 'SDA': 'Serial data line', + }, + 'ouputformats': ['i2c', 'ascii'], + } + return metadata +