onewire_link: Drop PD info not useful for the user.

diff --git a/decoders/onewire_link/__init__.py b/decoders/onewire_link/__init__.py
index 8846bf4e26dfcd228ddc1d65075944a7bc396597..f55b998aaadeb2b313c31bf216b23c3df2471f64 100644 (file)
--- a/decoders/onewire_link/__init__.py
+++ b/decoders/onewire_link/__init__.py
@@ -29,7 +29,7 @@ is layered:
  - Network layer (skip/search/match device ROM addresses)
  - Transport layer (transport data between 1-Wire master and device)
 
  - Network layer (skip/search/match device ROM addresses)
  - Transport layer (transport data between 1-Wire master and device)
 

-Link layer protocol details:
+This protocol decoder handles the 1-Wire link layer.

 
 Sample rate:
 A sufficiently high samplerate is required to properly detect all the elements
 
 Sample rate:
 A sufficiently high samplerate is required to properly detect all the elements


@@ -65,26 +65,6 @@ configure the following timing values (number of samplerate periods):
 
 These options should be configured only on very rare cases and the user should
 read the decoder source code to understand them correctly.
 
 These options should be configured only on very rare cases and the user should
 read the decoder source code to understand them correctly.

-
-Protocol output format:
-TODO.
-
-Annotations:
-
-Link layer annotations show the following events:
-
- - NOTE/WARNING/ERROR
-   Possible samplerate related timing issues are reported.
- - Reset/presence true/false
-   The event is marked from the signal negative edge to the end of the reset
-   high period. It's also reported if there are any devices attached to the bus.
- - Bit 0/1
-   The event is marked from the signal negative edge to the end of the data
-   slot. The value of each received bit is also provided.
-
-TODO:
-- Check for protocol correctness, if events are timed inside prescribed limits.
-- Maybe add support for interrupts, check if this feature is deprecated.

 '''
 
 from .pd import *
 '''
 
 from .pd import *