X-Git-Url: https://sigrok.org/gitweb/?p=libsigrokdecode.git;a=blobdiff_plain;f=decoders%2Fuart%2Fpd.py;h=fd8254c217d1602e2c6c46b3d3b43e24a5239127;hp=3bac6f1da48c147d9430f2caee6fdc99d1b504ed;hb=3d2d91e0b30e2e421bf693f7f9f8aad0634084b3;hpb=fb7a2f689cad8328a2b53101a968aef8e7a7b9e1

diff --git a/decoders/uart/pd.py b/decoders/uart/pd.py
index 3bac6f1..fd8254c 100644
--- a/decoders/uart/pd.py
+++ b/decoders/uart/pd.py
@@ -110,10 +110,11 @@ class Decoder(srd.Decoder):
             'values': ('lsb-first', 'msb-first')},
         {'id': 'format', 'desc': 'Data format', 'default': 'hex',
             'values': ('ascii', 'dec', 'hex', 'oct', 'bin')},
-        {'id': 'invert_rx', 'desc': 'Invert RX?', 'default': 'no',
+        {'id': 'invert_rx', 'desc': 'Invert RX', 'default': 'no',
             'values': ('yes', 'no')},
-        {'id': 'invert_tx', 'desc': 'Invert TX?', 'default': 'no',
+        {'id': 'invert_tx', 'desc': 'Invert TX', 'default': 'no',
             'values': ('yes', 'no')},
+        {'id': 'sample_point', 'desc': 'Sample point (%)', 'default': 50},
         {'id': 'rx_packet_delim', 'desc': 'RX packet delimiter (decimal)',
             'default': -1},
         {'id': 'tx_packet_delim', 'desc': 'TX packet delimiter (decimal)',
@@ -195,7 +196,6 @@ class Decoder(srd.Decoder):
 
     def reset(self):
         self.samplerate = None
-        self.samplenum = 0
         self.frame_start = [-1, -1]
         self.frame_valid = [None, None]
         self.startbit = [-1, -1]
@@ -225,12 +225,16 @@ class Decoder(srd.Decoder):
 
     def get_sample_point(self, rxtx, bitnum):
         # Determine absolute sample number of a bit slot's sample point.
-        # bitpos is the samplenumber which is in the middle of the
-        # specified UART bit (0 = start bit, 1..x = data, x+1 = parity bit
-        # (if used) or the first stop bit, and so on).
-        # The samples within bit are 0, 1, ..., (bit_width - 1), therefore
-        # index of the middle sample within bit window is (bit_width - 1) / 2.
-        bitpos = self.frame_start[rxtx] + (self.bit_width - 1) / 2.0
+        # Counts for UART bits start from 0 (0 = start bit, 1..x = data,
+        # x+1 = parity bit (if used) or the first stop bit, and so on).
+        # Accept a position in the range of 1-99% of the full bit width.
+        # Assume 50% for invalid input specs for backwards compatibility.
+        perc = self.options['sample_point'] or 50
+        if not perc or perc not in range(1, 100):
+            perc = 50
+        perc /= 100.0
+        bitpos = (self.bit_width - 1) * perc
+        bitpos += self.frame_start[rxtx]
         bitpos += bitnum * self.bit_width
         return bitpos