X-Git-Url: https://sigrok.org/gitweb/?p=libsigrokdecode.git;a=blobdiff_plain;f=decoders%2Fonewire_link%2Fpd.py;h=38ef8ccea3b5907fa1f020ba4964741e853bcb9d;hp=e7bf8b3b034e128e7588d16143b9d861d06a0f15;hb=84c1c0b52820af2418186ac3ecf93a5c6373a22e;hpb=497f196ddfa2d0e2e7925d6d8b3dea3548cf1b52 diff --git a/decoders/onewire_link/pd.py b/decoders/onewire_link/pd.py index e7bf8b3..38ef8cc 100644 --- a/decoders/onewire_link/pd.py +++ b/decoders/onewire_link/pd.py @@ -18,8 +18,6 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -# 1-Wire protocol decoder (link layer) - import sigrokdecode as srd class Decoder(srd.Decoder): @@ -37,31 +35,54 @@ class Decoder(srd.Decoder): optional_probes = [ {'id': 'pwr', 'name': 'PWR', 'desc': '1-Wire power supply pin'}, ] - options = { - 'overdrive': ['Overdrive', 1], + options = ( + {'id': 'overdrive', + 'desc': 'Overdrive mode', + 'default': 'no'}, # Time options (specified in microseconds): - 'cnt_normal_bit': ['Normal mode sample bit time (us)', 15], - 'cnt_normal_slot': ['Normal mode data slot time (us)', 60], - 'cnt_normal_presence': ['Normal mode sample presence time (us)', 75], - 'cnt_normal_reset': ['Normal mode reset time (us)', 480], - 'cnt_overdrive_bit': ['Overdrive mode sample bit time (us)', 2], - # 'cnt_overdrive_slot': ['Overdrive mode data slot time (us)', 7.3], - 'cnt_overdrive_slot': ['Overdrive mode data slot time (us)', 7], - 'cnt_overdrive_presence': ['Overdrive mode sample presence time (us)', 10], - 'cnt_overdrive_reset': ['Overdrive mode reset time (us)', 48], - } + {'id': 'cnt_normal_bit', + 'desc': 'Normal mode sample bit time (μs)', + 'default': 15}, + {'id': 'cnt_normal_slot', + 'desc': 'Normal mode data slot time (μs)', + 'default': 60}, + {'id': 'cnt_normal_presence', + 'desc': 'Normal mode sample presence time (μs)', + 'default': 75}, + {'id': 'cnt_normal_reset', + 'desc': 'Normal mode reset time (μs)', + 'default': 480}, + {'id': 'cnt_overdrive_bit', + 'desc': 'Overdrive mode sample bit time (μs)', + 'default': 2}, + {'id': 'cnt_overdrive_slot', + 'desc': 'Overdrive mode data slot time (μs)', + 'default': 7.3}, + {'id': 'cnt_overdrive_presence', + 'desc': 'Overdrive mode sample presence time (μs)', + 'default': 10}, + {'id': 'cnt_overdrive_reset', + 'desc': 'Overdrive mode reset time (μs)', + 'default': 48}, + ) annotations = [ ['bit', 'Bit'], ['warnings', 'Warnings'], - ['reset', 'Reset/presence'], + ['reset', 'Reset'], + ['presence', 'Presence'], ['overdrive', 'Overdrive mode notifications'], ] + annotation_rows = ( + ('bits', 'Bits', (0, 2, 3)), + ('info', 'Info', (4,)), + ('warnings', 'Warnings', (1,)), + ) def putm(self, data): self.put(0, 0, self.out_ann, data) def putpb(self, data): - self.put(self.fall, self.samplenum, self.out_proto, data) + self.put(self.fall, self.samplenum, self.out_python, data) def putb(self, data): self.put(self.fall, self.samplenum, self.out_ann, data) @@ -69,7 +90,17 @@ class Decoder(srd.Decoder): def putx(self, data): self.put(self.fall, self.cnt_bit[self.overdrive], self.out_ann, data) + def putfr(self, data): + self.put(self.fall, self.rise, self.out_ann, data) + + def putprs(self, data): + self.put(self.rise, self.samplenum, self.out_python, data) + + def putrs(self, data): + self.put(self.rise, self.samplenum, self.out_ann, data) + def __init__(self, **kwargs): + self.samplerate = None self.samplenum = 0 self.state = 'WAIT FOR FALLING EDGE' self.present = 0 @@ -80,14 +111,17 @@ class Decoder(srd.Decoder): self.fall = 0 self.rise = 0 - def start(self, metadata): - self.out_proto = self.add(srd.OUTPUT_PROTO, 'onewire_link') - self.out_ann = self.add(srd.OUTPUT_ANN, 'onewire_link') + def start(self): + self.out_python = self.register(srd.OUTPUT_PYTHON) + self.out_ann = self.register(srd.OUTPUT_ANN) - self.samplerate = metadata['samplerate'] + def metadata(self, key, value): + if key != srd.SRD_CONF_SAMPLERATE: + return + self.samplerate = value # Check if samplerate is appropriate. - if self.options['overdrive']: + if self.options['overdrive'] == 'yes': if self.samplerate < 2000000: self.putm([1, ['Sampling rate is too low. Must be above ' + '2MHz for proper overdrive mode decoding.']]) @@ -159,10 +193,9 @@ class Decoder(srd.Decoder): '(%2.1fus-%2.1fus) should be inside (7.3us, 10.0us).' % (time_min*1000000, time_max*1000000)]]) - def report(self): - pass - def decode(self, ss, es, data): + if self.samplerate is None: + raise Exception("Cannot decode without samplerate.") for (self.samplenum, (owr, pwr)) in data: # State machine. if self.state == 'WAIT FOR FALLING EDGE': @@ -191,7 +224,7 @@ class Decoder(srd.Decoder): self.state = 'WAIT FOR RISING EDGE' continue - self.putb([0, ['Bit: %d' % self.bit]]) + self.putb([0, ['Bit: %d' % self.bit, '%d' % self.bit]]) self.putpb(['BIT', self.bit]) # Checking the first command to see if overdrive mode @@ -199,7 +232,7 @@ class Decoder(srd.Decoder): if self.bit_cnt <= 8: self.command |= (self.bit << self.bit_cnt) elif self.bit_cnt == 8 and self.command in [0x3c, 0x69]: - self.putx([3, ['Entering overdrive mode']]) + self.putx([4, ['Entering overdrive mode', 'Overdrive on']]) # Increment the bit counter. self.bit_cnt += 1 # Wait for next slot. @@ -212,19 +245,21 @@ class Decoder(srd.Decoder): # Check if this was a reset cycle. t = self.samplenum - self.fall if t > self.cnt_normal_reset: - # Save the sample number for the falling edge. + # Save the sample number for the rising edge. self.rise = self.samplenum + self.putfr([2, ['Reset', 'Rst', 'R']]) self.state = 'WAIT FOR PRESENCE DETECT' # Exit overdrive mode. if self.overdrive: - self.putx([3, ['Exiting overdrive mode']]) + self.putx([4, ['Exiting overdrive mode', 'Overdrive off']]) self.overdrive = 0 # Clear command bit counter and data register. self.bit_cnt = 0 self.command = 0 elif (t > self.cnt_overdrive_reset) and self.overdrive: - # Save the sample number for the falling edge. + # Save the sample number for the rising edge. self.rise = self.samplenum + self.putfr([2, ['Reset', 'Rst', 'R']]) self.state = "WAIT FOR PRESENCE DETECT" # Otherwise this is assumed to be a data bit. else: @@ -247,8 +282,8 @@ class Decoder(srd.Decoder): continue p = 'false' if self.present else 'true' - self.putb([2, ['Reset/presence: %s' % p]]) - self.putpb(['RESET/PRESENCE', not self.present]) + self.putrs([3, ['Presence: %s' % p, 'Presence', 'Pres', 'P']]) + self.putprs(['RESET/PRESENCE', not self.present]) # Wait for next slot. self.state = 'WAIT FOR FALLING EDGE'