X-Git-Url: https://sigrok.org/gitweb/?p=libsigrokdecode.git;a=blobdiff_plain;f=decoders%2Fonewire%2Fonewire.py;h=e1972a8144131f3189d17392dbfc334a26182821;hp=7cd840b15c141ff1775270650a98d838e1ae6f33;hb=bcf36fc8681c2184b81601449c5fde25251e45cb;hpb=c08aea7e835a60f86e65c3b05bc8edff763c87a9 diff --git a/decoders/onewire/onewire.py b/decoders/onewire/onewire.py index 7cd840b..e1972a8 100644 --- a/decoders/onewire/onewire.py +++ b/decoders/onewire/onewire.py @@ -1,7 +1,7 @@ ## ## This file is part of the sigrok project. ## -## Copyright (C) 2011-2012 Uwe Hermann +## Copyright (C) 2012 Iztok Jeras ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by @@ -27,12 +27,22 @@ ANN_LINK = 0 ANN_NETWORK = 1 ANN_TRANSPORT = 2 +# a dictionary of ROM commands and their names +rom_command = {0x33: "READ ROM", + 0x0f: "CONDITIONAL READ ROM", + 0xcc: "SKIP ROM", + 0x55: "MATCH ROM", + 0xf0: "SEARCH ROM", + 0xec: "CONDITIONAL SEARCH ROM", + 0x3c: "OVERDRIVE SKIP ROM", + 0x6d: "OVERDRIVE MATCH ROM"} + class Decoder(srd.Decoder): api_version = 1 id = 'onewire' name = '1-Wire' - longname = '' - desc = '1-Wire bus and MicroLan' + longname = '1-Wire serial communication bus' + desc = 'Bidirectional, half-duplex, asynchronous serial bus.' license = 'gplv2+' inputs = ['logic'] outputs = ['onewire'] @@ -71,6 +81,7 @@ class Decoder(srd.Decoder): self.lnk_rise = 0 self.net_beg = 0 self.net_end = 0 + self.net_len = 0 # Network layer variables self.net_state = 'IDLE' self.net_cnt = 0 @@ -87,49 +98,85 @@ class Decoder(srd.Decoder): # check if samplerate is appropriate self.samplerate = metadata['samplerate'] if (self.options['overdrive']): - self.put(0, 0, self.out_ann, [ANN_LINK, ['NOTE: Sample rate checks assume overdrive mode.']]) + self.put(0, 0, self.out_ann, [ANN_LINK, + ['NOTE: Sample rate checks assume overdrive mode.']]) if (self.samplerate < 2000000): - self.put(0, 0, self.out_ann, [ANN_LINK, ['ERROR: Sampling rate is too low must be above 2MHz for proper overdrive mode decoding.']]) + self.put(0, 0, self.out_ann, [ANN_LINK, + ['ERROR: Sampling rate is too low must be above 2MHz for proper overdrive mode decoding.']]) elif (self.samplerate < 5000000): - self.put(0, 0, self.out_ann, [ANN_LINK, ['WARNING: Sampling rate is suggested to be above 5MHz for proper overdrive mode decoding.']]) + self.put(0, 0, self.out_ann, [ANN_LINK, + ['WARNING: Sampling rate is suggested to be above 5MHz for proper overdrive mode decoding.']]) else: - self.put(0, 0, self.out_ann, [ANN_LINK, ['NOTE: Sample rate checks assume normal mode only.']]) + self.put(0, 0, self.out_ann, [ANN_LINK, + ['NOTE: Sample rate checks assume normal mode only.']]) if (self.samplerate < 400000): - self.put(0, 0, self.out_ann, [ANN_LINK, ['ERROR: Sampling rate is too low must be above 400kHz for proper normal mode decoding.']]) + self.put(0, 0, self.out_ann, [ANN_LINK, + ['ERROR: Sampling rate is too low must be above 400kHz for proper normal mode decoding.']]) elif (self.samplerate < 1000000): - self.put(0, 0, self.out_ann, [ANN_LINK, ['WARNING: Sampling rate is suggested to be above 1MHz for proper normal mode decoding.']]) + self.put(0, 0, self.out_ann, [ANN_LINK, + ['WARNING: Sampling rate is suggested to be above 1MHz for proper normal mode decoding.']]) # The default 1-Wire time base is 30us, this is used to calculate sampling times. - if (self.options['cnt_normal_bit']): self.cnt_normal_bit = self.options['cnt_normal_bit'] - else: self.cnt_normal_bit = int(float(self.samplerate) * 0.000015) - 1 # 15ns - if (self.options['cnt_normal_presence']): self.cnt_normal_presence = self.options['cnt_normal_presence'] - else: self.cnt_normal_presence = int(float(self.samplerate) * 0.000075) - 1 # 75ns - if (self.options['cnt_normal_reset']): self.cnt_normal_reset = self.options['cnt_normal_reset'] - else: self.cnt_normal_reset = int(float(self.samplerate) * 0.000480) - 1 # 480ns - if (self.options['cnt_overdrive_bit']): self.cnt_overdrive_bit = self.options['cnt_overdrive_bit'] - else: self.cnt_overdrive_bit = int(float(self.samplerate) * 0.000002) - 1 # 2ns - if (self.options['cnt_overdrive_presence']): self.cnt_overdrive_presence = self.options['cnt_overdrive_presence'] - else: self.cnt_overdrive_presence = int(float(self.samplerate) * 0.000010) - 1 # 10ns - if (self.options['cnt_overdrive_reset']): self.cnt_overdrive_reset = self.options['cnt_overdrive_reset'] - else: self.cnt_overdrive_reset = int(float(self.samplerate) * 0.000048) - 1 # 48ns + if (self.options['cnt_normal_bit']): + self.cnt_normal_bit = self.options['cnt_normal_bit'] + else: + self.cnt_normal_bit = int(float(self.samplerate) * 0.000015) - 1 # 15ns + if (self.options['cnt_normal_presence']): + self.cnt_normal_presence = self.options['cnt_normal_presence'] + else: + self.cnt_normal_presence = int(float(self.samplerate) * 0.000075) - 1 # 75ns + if (self.options['cnt_normal_reset']): + self.cnt_normal_reset = self.options['cnt_normal_reset'] + else: + self.cnt_normal_reset = int(float(self.samplerate) * 0.000480) - 1 # 480ns + if (self.options['cnt_overdrive_bit']): + self.cnt_overdrive_bit = self.options['cnt_overdrive_bit'] + else: + self.cnt_overdrive_bit = int(float(self.samplerate) * 0.000002) - 1 # 2ns + if (self.options['cnt_overdrive_presence']): + self.cnt_overdrive_presence = self.options['cnt_overdrive_presence'] + else: + self.cnt_overdrive_presence = int(float(self.samplerate) * 0.000010) - 1 # 10ns + if (self.options['cnt_overdrive_reset']): + self.cnt_overdrive_reset = self.options['cnt_overdrive_reset'] + else: + self.cnt_overdrive_reset = int(float(self.samplerate) * 0.000048) - 1 # 48ns + + # calculating the slot size + self.cnt_normal_slot = int(float(self.samplerate) * 0.000060) - 1 # 60ns + self.cnt_overdrive_slot = int(float(self.samplerate) * 0.000006) - 1 # 6ns + + # organize values into lists + self.cnt_bit = [self.cnt_normal_bit , self.cnt_overdrive_bit ] + self.cnt_presence = [self.cnt_normal_presence, self.cnt_overdrive_presence] + self.cnt_reset = [self.cnt_normal_reset , self.cnt_overdrive_reset ] + self.cnt_slot = [self.cnt_normal_slot , self.cnt_overdrive_slot ] # Check if sample times are in the allowed range time_min = float(self.cnt_normal_bit ) / self.samplerate time_max = float(self.cnt_normal_bit+1) / self.samplerate if ( (time_min < 0.000005) or (time_max > 0.000015) ) : - self.put(0, 0, self.out_ann, [ANN_LINK, ['WARNING: The normal mode data sample time interval (%2.1fus-%2.1fus) should be inside (5.0us, 15.0us).' % (time_min*1000000, time_max*1000000)]]) + self.put(0, 0, self.out_ann, [ANN_LINK, + ['WARNING: The normal mode data sample time interval (%2.1fus-%2.1fus) should be inside (5.0us, 15.0us).' + % (time_min*1000000, time_max*1000000)]]) time_min = float(self.cnt_normal_presence ) / self.samplerate time_max = float(self.cnt_normal_presence+1) / self.samplerate if ( (time_min < 0.0000681) or (time_max > 0.000075) ) : - self.put(0, 0, self.out_ann, [ANN_LINK, ['WARNING: The normal mode presence sample time interval (%2.1fus-%2.1fus) should be inside (68.1us, 75.0us).' % (time_min*1000000, time_max*1000000)]]) + self.put(0, 0, self.out_ann, [ANN_LINK, + ['WARNING: The normal mode presence sample time interval (%2.1fus-%2.1fus) should be inside (68.1us, 75.0us).' + % (time_min*1000000, time_max*1000000)]]) time_min = float(self.cnt_overdrive_bit ) / self.samplerate time_max = float(self.cnt_overdrive_bit+1) / self.samplerate if ( (time_min < 0.000001) or (time_max > 0.000002) ) : - self.put(0, 0, self.out_ann, [ANN_LINK, ['WARNING: The overdrive mode data sample time interval (%2.1fus-%2.1fus) should be inside (1.0us, 2.0us).' % (time_min*1000000, time_max*1000000)]]) + self.put(0, 0, self.out_ann, [ANN_LINK, + ['WARNING: The overdrive mode data sample time interval (%2.1fus-%2.1fus) should be inside (1.0us, 2.0us).' + % (time_min*1000000, time_max*1000000)]]) time_min = float(self.cnt_overdrive_presence ) / self.samplerate time_max = float(self.cnt_overdrive_presence+1) / self.samplerate if ( (time_min < 0.0000073) or (time_max > 0.000010) ) : - self.put(0, 0, self.out_ann, [ANN_LINK, ['WARNING: The overdrive mode presence sample time interval (%2.1fus-%2.1fus) should be inside (7.3us, 10.0us).' % (time_min*1000000, time_max*1000000)]]) + self.put(0, 0, self.out_ann, [ANN_LINK, + ['WARNING: The overdrive mode presence sample time interval (%2.1fus-%2.1fus) should be inside (7.3us, 10.0us).' + % (time_min*1000000, time_max*1000000)]]) def report(self): pass @@ -151,14 +198,12 @@ class Decoder(srd.Decoder): self.lnk_state = 'WAIT FOR DATA SAMPLE' elif self.lnk_state == 'WAIT FOR DATA SAMPLE': # Sample data bit - if (self.lnk_overdrive): cnt = self.cnt_overdrive_bit - else : cnt = self.cnt_normal_bit - if (self.samplenum - self.lnk_fall == cnt): + if (self.samplenum - self.lnk_fall == self.cnt_bit[self.lnk_overdrive]): self.lnk_bit = owr & 0x1 self.lnk_event = "DATA BIT" if (self.lnk_bit): self.lnk_state = 'WAIT FOR FALLING EDGE' else : self.lnk_state = 'WAIT FOR RISING EDGE' - self.put(self.lnk_fall, self.samplenum, self.out_ann, [ANN_LINK, ['BIT: %01x' % self.lnk_bit]]) + self.put(self.lnk_fall, self.cnt_bit[self.lnk_overdrive], self.out_ann, [ANN_LINK, ['BIT: %01x' % self.lnk_bit]]) elif self.lnk_state == 'WAIT FOR RISING EDGE': # The end of a cycle is a rising edge. if (owr == 1): @@ -169,9 +214,9 @@ class Decoder(srd.Decoder): # Send a reset event to the next protocol layer. self.lnk_event = "RESET" self.lnk_state = "WAIT FOR PRESENCE DETECT" - self.put(self.lnk_fall, self.samplenum, self.out_proto, ['RESET']) - self.put(self.lnk_fall, self.samplenum, self.out_ann, [ANN_LINK , ['RESET']]) - self.put(self.lnk_fall, self.samplenum, self.out_ann, [ANN_NETWORK , ['RESET']]) + self.put(self.lnk_fall, self.lnk_rise, self.out_proto, ['RESET']) + self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_LINK , ['RESET']]) + self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_NETWORK , ['RESET']]) # Reset the timer. self.lnk_fall = self.samplenum elif ((self.samplenum - self.lnk_fall > self.cnt_overdrive_reset) and (self.lnk_overdrive)): @@ -180,9 +225,9 @@ class Decoder(srd.Decoder): # Send a reset event to the next protocol layer. self.lnk_event = "RESET" self.lnk_state = "WAIT FOR PRESENCE DETECT" - self.put(self.lnk_fall, self.samplenum, self.out_proto, ['RESET OVERDRIVE']) - self.put(self.lnk_fall, self.samplenum, self.out_ann, [ANN_LINK , ['RESET OVERDRIVE']]) - self.put(self.lnk_fall, self.samplenum, self.out_ann, [ANN_NETWORK , ['RESET OVERDRIVE']]) + self.put(self.lnk_fall, self.lnk_rise, self.out_proto, ['RESET OVERDRIVE']) + self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_LINK , ['RESET OVERDRIVE']]) + self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_NETWORK , ['RESET OVERDRIVE']]) # Reset the timer. self.lnk_fall = self.samplenum # Otherwise this is assumed to be a data bit. @@ -190,9 +235,7 @@ class Decoder(srd.Decoder): self.lnk_state = "WAIT FOR FALLING EDGE" elif self.lnk_state == 'WAIT FOR PRESENCE DETECT': # Sample presence status - if (self.lnk_overdrive): cnt = self.cnt_overdrive_presence - else : cnt = self.cnt_normal_presence - if (self.samplenum - self.lnk_rise == cnt): + if (self.samplenum - self.lnk_rise == self.cnt_presence[self.lnk_overdrive]): self.lnk_present = owr & 0x1 # Save the sample number for the falling edge. if not (self.lnk_present) : self.lnk_fall = self.samplenum @@ -201,13 +244,13 @@ class Decoder(srd.Decoder): if (self.lnk_present) : self.lnk_state = 'WAIT FOR FALLING EDGE' else : self.lnk_state = 'WAIT FOR RISING EDGE' present_str = "False" if self.lnk_present else "True" - self.put(self.lnk_fall, self.samplenum, self.out_ann, [ANN_LINK , ['PRESENCE: ' + present_str]]) - self.put(self.lnk_fall, self.samplenum, self.out_ann, [ANN_NETWORK, ['PRESENCE: ' + present_str]]) + self.put(self.samplenum, 0, self.out_ann, [ANN_LINK , ['PRESENCE: ' + present_str]]) + self.put(self.samplenum, 0, self.out_ann, [ANN_NETWORK, ['PRESENCE: ' + present_str]]) else: raise Exception('Invalid lnk_state: %d' % self.lnk_state) # Network layer - + # State machine. if (self.lnk_event == "RESET"): self.net_state = "COMMAND" @@ -218,39 +261,24 @@ class Decoder(srd.Decoder): elif (self.net_state == "COMMAND"): # Receiving and decoding a ROM command if (self.onewire_collect(8)): - self.put(self.net_beg, self.net_end, self.out_ann, [ANN_NETWORK, ['ROM COMMAND: 0x%02x' % self.net_data]]) - if (self.net_data == 0x33): - # READ ROM - self.put(self.net_beg, self.net_end, self.out_ann, [ANN_NETWORK, ['ROM COMMAND: \'READ ROM\'']]) + self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK, + ['ROM COMMAND: 0x%02x \'%s\'' % (self.net_data, rom_command[self.net_data])]]) + if (self.net_data == 0x33): # READ ROM self.net_state = "GET ROM" - elif (self.net_data == 0x0f): - # CONDITIONAL READ ROM - self.put(self.net_beg, self.net_end, self.out_ann, [ANN_NETWORK, ['ROM COMMAND: \'CONDITIONAL READ ROM\'']]) + elif (self.net_data == 0x0f): # CONDITIONAL READ ROM self.net_state = "GET ROM" - elif (self.net_data == 0xcc): - # SKIP ROM - self.put(self.net_beg, self.net_end, self.out_ann, [ANN_NETWORK, ['ROM COMMAND: \'SKIP ROM\'']]) + elif (self.net_data == 0xcc): # SKIP ROM self.net_state = "TRANSPORT" - elif (self.net_data == 0x55): - # MATCH ROM - self.put(self.net_beg, self.net_end, self.out_ann, [ANN_NETWORK, ['ROM COMMAND: \'MATCH ROM\'']]) + elif (self.net_data == 0x55): # MATCH ROM self.net_state = "GET ROM" - elif (self.net_data == 0xf0): - # SEARCH ROM - self.put(self.net_beg, self.net_end, self.out_ann, [ANN_NETWORK, ['ROM COMMAND: \'SEARCH ROM\'']]) + elif (self.net_data == 0xf0): # SEARCH ROM self.net_state = "SEARCH ROM" - elif (self.net_data == 0xec): - # CONDITIONAL SEARCH ROM - self.put(self.net_beg, self.net_end, self.out_ann, [ANN_NETWORK, ['ROM COMMAND: \'CONDITIONAL SEARCH ROM\'']]) + elif (self.net_data == 0xec): # CONDITIONAL SEARCH ROM self.net_state = "SEARCH ROM" - elif (self.net_data == 0x3c): - # OVERDRIVE SKIP ROM - self.put(self.net_beg, self.net_end, self.out_ann, [ANN_NETWORK, ['ROM COMMAND: \'OVERDRIVE SKIP ROM\'']]) + elif (self.net_data == 0x3c): # OVERDRIVE SKIP ROM self.lnk_overdrive = 1 self.net_state = "TRANSPORT" - elif (self.net_data == 0x69): - # OVERDRIVE MATCH ROM - self.put(self.net_beg, self.net_end, self.out_ann, [ANN_NETWORK, ['ROM COMMAND: \'OVERDRIVE MATCH ROM\'']]) + elif (self.net_data == 0x69): # OVERDRIVE MATCH ROM self.lnk_overdrive = 1 self.net_state = "GET ROM" elif (self.net_state == "GET ROM"): @@ -258,21 +286,21 @@ class Decoder(srd.Decoder): # family code (1B) + serial number (6B) + CRC (1B) if (self.onewire_collect(64)): self.net_rom = self.net_data & 0xffffffffffffffff - self.put(self.net_beg, self.net_end, self.out_ann, [ANN_NETWORK, ['ROM: 0x%016x' % self.net_rom]]) + self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK, ['ROM: 0x%016x' % self.net_rom]]) self.net_state = "TRANSPORT" elif (self.net_state == "SEARCH ROM"): # A 64 bit device address is searched for # family code (1B) + serial number (6B) + CRC (1B) if (self.onewire_search(64)): self.net_rom = self.net_data & 0xffffffffffffffff - self.put(self.net_beg, self.net_end, self.out_ann, [ANN_NETWORK, ['ROM: 0x%016x' % self.net_rom]]) + self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK, ['ROM: 0x%016x' % self.net_rom]]) self.net_state = "TRANSPORT" elif (self.net_state == "TRANSPORT"): # The transport layer is handled in byte sized units if (self.onewire_collect(8)): - self.put(self.net_beg, self.net_end, self.out_ann, [ANN_NETWORK , ['TRANSPORT: 0x%02x' % self.net_data]]) - self.put(self.net_beg, self.net_end, self.out_ann, [ANN_TRANSPORT, ['TRANSPORT: 0x%02x' % self.net_data]]) - self.put(self.net_beg, self.net_end, self.out_proto, ['transfer', self.net_data]) + self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK , ['TRANSPORT: 0x%02x' % self.net_data]]) + self.put(self.net_beg, self.net_len, self.out_ann, [ANN_TRANSPORT, ['TRANSPORT: 0x%02x' % self.net_data]]) + self.put(self.net_beg, self.net_len, self.out_proto, ['transfer', self.net_data]) # TODO: Sending translort layer data to 1-Wire device models else: raise Exception('Invalid net_state: %s' % self.net_state) @@ -283,13 +311,14 @@ class Decoder(srd.Decoder): if (self.lnk_event == "DATA BIT"): # Storing the sampe this sequence begins with if (self.net_cnt == 1): - self.net_beg = self.samplenum + self.net_beg = self.lnk_fall self.net_data = self.net_data & ~(1 << self.net_cnt) | (self.lnk_bit << self.net_cnt) self.net_cnt = self.net_cnt + 1 # Storing the sampe this sequence ends with # In case the full length of the sequence is received, return 1 if (self.net_cnt == length): - self.net_end = self.samplenum + self.net_end = self.lnk_fall + self.cnt_slot[self.lnk_overdrive] + self.net_len = self.net_end - self.net_beg self.net_data = self.net_data & ((1<