X-Git-Url: https://sigrok.org/gitweb/?p=libsigrokdecode.git;a=blobdiff_plain;f=decoders%2Fmaxim_ds28ea00%2F__init__.py;h=750d6993d7c76aa4fc622b84da697f132844238d;hp=c6f063dae629741fcdda7828a0437306001337c9;hb=35b380b1156434b73d4a976c68f5ab3604c8510a;hpb=19dd61efcc1fe07c6a66f48f74b7926607f3a541

diff --git a/decoders/maxim_ds28ea00/__init__.py b/decoders/maxim_ds28ea00/__init__.py
index c6f063d..750d699 100644
--- a/decoders/maxim_ds28ea00/__init__.py
+++ b/decoders/maxim_ds28ea00/__init__.py
@@ -1,5 +1,5 @@
 ##
-## This file is part of the sigrok project.
+## This file is part of the libsigrokdecode project.
 ##
 ## Copyright (C) 2012 Uwe Hermann <uwe@hermann-uwe.de>
 ##
@@ -19,38 +19,8 @@
 ##
 
 '''
-1-Wire protocol decoder.
-
-The 1-Wire protocol enables bidirectional communication over a single wire (and
-ground) between a single master and one or multiple slaves. The protocol is
-layered.
-- Link layer (reset, presence detection, reading/writing bits)
-- Network layer (skip/search/match device ROM addresses)
-- Transport layer (transport data between 1-Wire master and device)
-
-Transport layer
-
-The transport layer is the largest and most complex part of the protocol, since
-it is very device specific. The decoder is parsing only a small part of the
-protocol.
-
-Annotations:
-The next link layer annotations are shown:
-- RESET/PRESENCE True/False
-  The event is marked from the signal negative edge to the end of the reset
-  high period. It is also reported if there are any devices attached to the
-  bus.
-The next network layer annotations are shown:
-- ROM val
-  The 64bit value of the addressed device is displayed:
-  family code (1B) + serial number (6B) + CRC (1B)
-- FUNCTION COMMAND val name
-  The requested FUNCTION command is displayed as an 8bit HEX value and by name.
-- DATA val
-  Data intended for the transport layer is displayed as an 8bit HEX value.
-
-TODO:
-- add CRC checks for transport layer
+This decoder stacks on top of the 'onewire_network' PD and decodes the
+Maxim DS28EA00 1-Wire digital thermometer protocol.
 '''
 
-from .maxim_ds28ea00 import *
+from .pd import *