X-Git-Url: https://sigrok.org/gitweb/?p=libsigrokdecode.git;a=blobdiff_plain;f=decoders%2Fguess_bitrate%2F__init__.py;h=9c7e6a47aba7d2912d0c2c7981a85129bc04e8cb;hp=86f9466a9b530438ef6f15e628a921fa22258f7c;hb=6a15597a7b3f901b566b7bfc8c484a14e0fb6a11;hpb=486858f7208207fb12a281640c5f6e9be4e4626f

diff --git a/decoders/guess_bitrate/__init__.py b/decoders/guess_bitrate/__init__.py
index 86f9466..9c7e6a4 100644
--- a/decoders/guess_bitrate/__init__.py
+++ b/decoders/guess_bitrate/__init__.py
@@ -20,7 +20,7 @@
 
 '''
 This protocol decoder tries to guess the bitrate / baudrate of the
-communication on the specified probe. Typically this will be used to
+communication on the specified channel. Typically this will be used to
 guess / detect the baudrate used in a UART communication snippet, but it
 could also be used to guess bitrates of certain other protocols or buses.
 
@@ -29,9 +29,9 @@ and that there are various cases in practice where the detection of the
 bitrate or baudrate will not necessarily have the expected result.
 
 The precision of the estimated bitrate / baudrate will also depend on the
-samplerate used to sample the respective probe. For good results it is
+samplerate used to sample the respective channel. For good results it is
 recommended to use a logic analyzer samplerate that is much higher than
-the expected bitrate/baudrate that might be used on the probe.
+the expected bitrate/baudrate that might be used on the channel.
 '''
 
 from .pd import *