* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <config.h>
#include "libsigrokdecode-internal.h" /* First, so we avoid a _POSIX_C_SOURCE warning. */
#include "libsigrokdecode.h"
-#include "config.h"
#include <inttypes.h>
#include <glib.h>
GVariant *data)
{
PyObject *py_ret;
+ GSList *l;
+ struct srd_decoder_inst *next_di;
+ int ret;
+ PyGILState_STATE gstate;
if (key != SRD_CONF_SAMPLERATE)
/* This is the only key we pass on to the decoder for now. */
return SRD_OK;
- if (!PyObject_HasAttrString(di->py_inst, "metadata"))
- /* This decoder doesn't want metadata, that's fine. */
- return SRD_OK;
+ gstate = PyGILState_Ensure();
+
+ if (PyObject_HasAttrString(di->py_inst, "metadata")) {
+ py_ret = PyObject_CallMethod(di->py_inst, "metadata", "lK",
+ (long)SRD_CONF_SAMPLERATE,
+ (unsigned long long)g_variant_get_uint64(data));
+ Py_XDECREF(py_ret);
+ }
- py_ret = PyObject_CallMethod(di->py_inst, "metadata", "lK",
- (long)SRD_CONF_SAMPLERATE,
- (unsigned long long)g_variant_get_uint64(data));
- Py_XDECREF(py_ret);
+ PyGILState_Release(gstate);
+
+ /* Push metadata to all the PDs stacked on top of this one. */
+ for (l = di->next_di; l; l = l->next) {
+ next_di = l->data;
+ if ((ret = srd_inst_send_meta(next_di, key, data)) != SRD_OK)
+ return ret;
+ }
return SRD_OK;
}
return SRD_ERR_ARG;
}
- srd_dbg("Setting session %d samplerate to %"PRIu64".",
+ srd_dbg("Setting session %d samplerate to %"G_GUINT64_FORMAT".",
sess->session_id, g_variant_get_uint64(data));
ret = SRD_OK;
* in channel order, in the least amount of space possible. The default
* channel set consists of all required channels + all optional channels.
*
- * The size of a sample in inbuf is the unit size passed to
- * srd_inst_channel_set_all(). If no channel map has been configured, it is
- * the minimum number of bytes needed to store the default channels.
+ * The size of a sample in inbuf is 'unitsize' bytes. If no channel map
+ * has been configured, it is the minimum number of bytes needed to store
+ * the default channels.
+ *
+ * The calls to this function must provide the samples that shall be
+ * used by the protocol decoder
+ * - in the correct order ([...]5, 6, 4, 7, 8[...] is a bug),
+ * - starting from sample zero (2, 3, 4, 5, 6[...] is a bug),
+ * - consecutively, with no gaps (0, 1, 2, 4, 5[...] is a bug).
+ *
+ * The start- and end-sample numbers are absolute sample numbers (relative
+ * to the start of the whole capture/file/stream), i.e. they are not relative
+ * sample numbers within the chunk specified by 'inbuf' and 'inbuflen'.
*
- * @param sess The session to use.
- * @param start_samplenum The sample number of the first sample in this chunk.
- * @param end_samplenum The sample number of the last sample in this chunk.
- * @param inbuf Pointer to sample data.
- * @param inbuflen Length in bytes of the buffer.
+ * Correct example (4096 samples total, 4 chunks @ 1024 samples each):
+ * srd_session_send(s, 0, 1023, inbuf, 1024, 1);
+ * srd_session_send(s, 1024, 2047, inbuf, 1024, 1);
+ * srd_session_send(s, 2048, 3071, inbuf, 1024, 1);
+ * srd_session_send(s, 3072, 4095, inbuf, 1024, 1);
+ *
+ * The chunk size ('inbuflen') can be arbitrary and can differ between calls.
+ *
+ * Correct example (4096 samples total, 7 chunks @ various samples each):
+ * srd_session_send(s, 0, 1023, inbuf, 1024, 1);
+ * srd_session_send(s, 1024, 1123, inbuf, 100, 1);
+ * srd_session_send(s, 1124, 1423, inbuf, 300, 1);
+ * srd_session_send(s, 1424, 1642, inbuf, 219, 1);
+ * srd_session_send(s, 1643, 2047, inbuf, 405, 1);
+ * srd_session_send(s, 2048, 3071, inbuf, 1024, 1);
+ * srd_session_send(s, 3072, 4095, inbuf, 1024, 1);
+ *
+ * INCORRECT example (4096 samples total, 4 chunks @ 1024 samples each, but
+ * the start- and end-samplenumbers are not absolute):
+ * srd_session_send(s, 0, 1023, inbuf, 1024, 1);
+ * srd_session_send(s, 0, 1023, inbuf, 1024, 1);
+ * srd_session_send(s, 0, 1023, inbuf, 1024, 1);
+ * srd_session_send(s, 0, 1023, inbuf, 1024, 1);
+ *
+ * @param sess The session to use. Must not be NULL.
+ * @param abs_start_samplenum The absolute starting sample number for the
+ * buffer's sample set, relative to the start of capture.
+ * @param abs_end_samplenum The absolute ending sample number for the
+ * buffer's sample set, relative to the start of capture.
+ * @param inbuf Pointer to sample data. Must not be NULL.
+ * @param inbuflen Length in bytes of the buffer. Must be > 0.
+ * @param unitsize The number of bytes per sample. Must be > 0.
*
* @return SRD_OK upon success, a (negative) error code otherwise.
*
- * @since 0.3.0
+ * @since 0.4.0
*/
SRD_API int srd_session_send(struct srd_session *sess,
- uint64_t start_samplenum, uint64_t end_samplenum,
- const uint8_t *inbuf, uint64_t inbuflen)
+ uint64_t abs_start_samplenum, uint64_t abs_end_samplenum,
+ const uint8_t *inbuf, uint64_t inbuflen, uint64_t unitsize)
{
GSList *d;
int ret;
return SRD_ERR_ARG;
}
- srd_dbg("Calling decode() on all instances with starting sample "
- "number %" PRIu64 ", %" PRIu64 " bytes at 0x%p",
- start_samplenum, inbuflen, inbuf);
-
for (d = sess->di_list; d; d = d->next) {
- if ((ret = srd_inst_decode(d->data, start_samplenum,
- end_samplenum, inbuf, inbuflen)) != SRD_OK)
+ if ((ret = srd_inst_decode(d->data, abs_start_samplenum,
+ abs_end_samplenum, inbuf, inbuflen, unitsize)) != SRD_OK)
return ret;
}
return SRD_OK;
}
+/**
+ * Terminate currently executing decoders in a session, reset internal state.
+ *
+ * All decoder instances have their .wait() method terminated, which
+ * shall terminate .decode() as well. Afterwards the decoders' optional
+ * .reset() method gets executed.
+ *
+ * This routine allows callers to abort pending expensive operations,
+ * when they are no longer interested in the decoders' results. Note
+ * that the decoder state is lost and aborted work cannot resume.
+ *
+ * This routine also allows callers to re-use previously created decoder
+ * stacks to process new input data which is not related to previously
+ * processed input data. This avoids the necessity to re-construct the
+ * decoder stack.
+ *
+ * @param sess The session in which to terminate decoders.
+ * @return SRD_OK upon success, a (negative) error code otherwise.
+ *
+ * @since 0.6.0
+ */
+SRD_API int srd_session_terminate_reset(struct srd_session *sess)
+{
+ GSList *d;
+ int ret;
+
+ if (session_is_valid(sess) != SRD_OK) {
+ srd_err("Invalid session.");
+ return SRD_ERR_ARG;
+ }
+
+ for (d = sess->di_list; d; d = d->next) {
+ ret = srd_inst_terminate_reset(d->data);
+ if (ret != SRD_OK)
+ return ret;
+ }
+ return SRD_OK;
+}
+
/**
* Destroy a decoding session.
*
session_id = sess->session_id;
if (sess->di_list)
- srd_inst_free_all(sess, NULL);
+ srd_inst_free_all(sess);
if (sess->callbacks)
g_slist_free_full(sess->callbacks, g_free);
sessions = g_slist_remove(sessions, sess);
projects / libsigrokdecode.git / blobdiff