di->condition_list = NULL;
di->match_array = NULL;
- di->start_samplenum = 0;
- di->end_samplenum = 0;
+ di->abs_start_samplenum = 0;
+ di->abs_end_samplenum = 0;
di->inbuf = NULL;
di->inbuflen = 0;
- di->cur_samplenum = 0;
+ di->abs_cur_samplenum = 0;
di->old_pins_array = NULL;
di->thread_handle = NULL;
di->got_new_samples = FALSE;
return TRUE;
}
- num_samples_to_process = di->end_samplenum - di->cur_samplenum;
+ num_samples_to_process = di->abs_end_samplenum - di->abs_cur_samplenum;
num_conditions = g_slist_length(di->condition_list);
/* di->match_array is NULL here. Create a new GArray. */
di->match_array = g_array_sized_new(FALSE, TRUE, sizeof(gboolean), num_conditions);
g_array_set_size(di->match_array, num_conditions);
- for (i = 0, s = 0; i < num_samples_to_process; i++, s++, (di->cur_samplenum)++) {
+ for (i = 0, s = 0; i < num_samples_to_process; i++, s++, (di->abs_cur_samplenum)++) {
- sample_pos = di->inbuf + ((di->cur_samplenum - di->start_samplenum) * di->data_unitsize);
+ sample_pos = di->inbuf + ((di->abs_cur_samplenum - di->abs_start_samplenum) * di->data_unitsize);
/* Check whether the current sample matches at least one of the conditions (logical OR). */
/* IMPORTANT: We need to check all conditions, even if there was a match already! */
*found_match = find_match(di);
/* Did we handle all samples yet? */
- if (di->cur_samplenum >= di->end_samplenum) {
- srd_dbg("Done, handled all samples (%" PRIu64 "/%" PRIu64 ").",
- di->cur_samplenum, di->end_samplenum);
+ if (di->abs_cur_samplenum >= di->abs_end_samplenum) {
+ srd_dbg("Done, handled all samples (abs cur %" PRIu64
+ " / abs end %" PRIu64 ").",
+ di->abs_cur_samplenum, di->abs_end_samplenum);
return SRD_OK;
}
/**
* Decode a chunk of samples.
*
+ * The calls to this function must provide the samples that shall be
+ * used by the protocol decoder
+ * - in the correct order ([...]5, 6, 4, 7, 8[...] is a bug),
+ * - starting from sample zero (2, 3, 4, 5, 6[...] is a bug),
+ * - consecutively, with no gaps (0, 1, 2, 4, 5[...] is a bug).
+ *
+ * The start- and end-sample numbers are absolute sample numbers (relative
+ * to the start of the whole capture/file/stream), i.e. they are not relative
+ * sample numbers within the chunk specified by 'inbuf' and 'inbuflen'.
+ *
+ * Correct example (4096 samples total, 4 chunks @ 1024 samples each):
+ * srd_inst_decode(di, 0, 1023, inbuf, 1024, 1);
+ * srd_inst_decode(di, 1024, 2047, inbuf, 1024, 1);
+ * srd_inst_decode(di, 2048, 3071, inbuf, 1024, 1);
+ * srd_inst_decode(di, 3072, 4095, inbuf, 1024, 1);
+ *
+ * The chunk size ('inbuflen') can be arbitrary and can differ between calls.
+ *
+ * Correct example (4096 samples total, 7 chunks @ various samples each):
+ * srd_inst_decode(di, 0, 1023, inbuf, 1024, 1);
+ * srd_inst_decode(di, 1024, 1123, inbuf, 100, 1);
+ * srd_inst_decode(di, 1124, 1423, inbuf, 300, 1);
+ * srd_inst_decode(di, 1424, 1642, inbuf, 219, 1);
+ * srd_inst_decode(di, 1643, 2047, inbuf, 405, 1);
+ * srd_inst_decode(di, 2048, 3071, inbuf, 1024, 1);
+ * srd_inst_decode(di, 3072, 4095, inbuf, 1024, 1);
+ *
+ * INCORRECT example (4096 samples total, 4 chunks @ 1024 samples each, but
+ * the start- and end-samplenumbers are not absolute):
+ * srd_inst_decode(di, 0, 1023, inbuf, 1024, 1);
+ * srd_inst_decode(di, 0, 1023, inbuf, 1024, 1);
+ * srd_inst_decode(di, 0, 1023, inbuf, 1024, 1);
+ * srd_inst_decode(di, 0, 1023, inbuf, 1024, 1);
+ *
* @param di The decoder instance to call. Must not be NULL.
- * @param start_samplenum The starting sample number for the buffer's sample
- * set, relative to the start of capture.
- * @param end_samplenum The ending sample number for the buffer's sample
- * set, relative to the start of capture.
+ * @param abs_start_samplenum The absolute starting sample number for the
+ * buffer's sample set, relative to the start of capture.
+ * @param abs_end_samplenum The absolute ending sample number for the
+ * buffer's sample set, relative to the start of capture.
* @param inbuf The buffer to decode. Must not be NULL.
* @param inbuflen Length of the buffer. Must be > 0.
* @param unitsize The number of bytes per sample. Must be > 0.
* @private
*/
SRD_PRIV int srd_inst_decode(struct srd_decoder_inst *di,
- uint64_t start_samplenum, uint64_t end_samplenum,
+ uint64_t abs_start_samplenum, uint64_t abs_end_samplenum,
const uint8_t *inbuf, uint64_t inbuflen, uint64_t unitsize)
{
PyObject *py_res;
di->data_unitsize = unitsize;
- srd_dbg("Decoding: start sample %" PRIu64 ", end sample %"
+ srd_dbg("Decoding: abs start sample %" PRIu64 ", abs end sample %"
PRIu64 " (%" PRIu64 " samples, %" PRIu64 " bytes, unitsize = "
- "%d), instance %s.", start_samplenum, end_samplenum,
- end_samplenum - start_samplenum, inbuflen, di->data_unitsize,
+ "%d), instance %s.", abs_start_samplenum, abs_end_samplenum,
+ abs_end_samplenum - abs_start_samplenum, inbuflen, di->data_unitsize,
di->inst_id);
apiver = srd_decoder_apiver(di->decoder);
logic = PyObject_New(srd_logic, (PyTypeObject *)srd_logic_type);
Py_INCREF(logic);
logic->di = (struct srd_decoder_inst *)di;
- logic->start_samplenum = start_samplenum;
+ logic->abs_start_samplenum = abs_start_samplenum;
logic->itercnt = 0;
logic->inbuf = (uint8_t *)inbuf;
logic->inbuflen = inbuflen;
Py_IncRef(di->py_inst);
if (!(py_res = PyObject_CallMethod(di->py_inst, "decode",
- "KKO", start_samplenum, end_samplenum, logic))) {
+ "KKO", abs_start_samplenum, abs_end_samplenum, logic))) {
srd_exception_catch("Protocol decoder instance %s",
di->inst_id);
return SRD_ERR_PYTHON;
/* Push the new sample chunk to the worker thread. */
g_mutex_lock(&di->data_mutex);
- di->start_samplenum = start_samplenum;
- di->end_samplenum = end_samplenum;
+ di->abs_start_samplenum = abs_start_samplenum;
+ di->abs_end_samplenum = abs_end_samplenum;
di->inbuf = inbuf;
di->inbuflen = inbuflen;
di->got_new_samples = TRUE;
projects / libsigrokdecode.git / blobdiff