'''
OUTPUT_PYTHON format:
-UART packet:
-[<packet-type>, <rxtx>, <packet-data>]
+Packet:
+[<ptype>, <rxtx>, <pdata>]
-This is the list of <packet-type>s and their respective <packet-data>:
+This is the list of <ptype>s and their respective <pdata> values:
- 'STARTBIT': The data is the (integer) value of the start bit (0/1).
- 'DATA': The data is the (integer) value of the UART data. Valid values
range from 0 to 512 (as the data can be up to 9 bits in size).
return (ones % 2) == 1
elif parity_type == 'even':
return (ones % 2) == 0
- else:
- raise Exception('Invalid parity type: %d' % parity_type)
+
+class SamplerateError(Exception):
+ pass
class Decoder(srd.Decoder):
- api_version = 1
+ api_version = 2
id = 'uart'
name = 'UART'
longname = 'Universal Asynchronous Receiver/Transmitter'
license = 'gplv2+'
inputs = ['logic']
outputs = ['uart']
- optional_probes = [
+ optional_channels = (
# Allow specifying only one of the signals, e.g. if only one data
# direction exists (or is relevant).
{'id': 'rx', 'name': 'RX', 'desc': 'UART receive line'},
{'id': 'tx', 'name': 'TX', 'desc': 'UART transmit line'},
- ]
+ )
options = (
{'id': 'baudrate', 'desc': 'Baud rate', 'default': 115200},
{'id': 'num_data_bits', 'desc': 'Data bits', 'default': 8,
'values': ('ascii', 'dec', 'hex', 'oct', 'bin')},
# TODO: Options to invert the signal(s).
)
- annotations = [
- ['rx-data', 'RX data'],
- ['tx-data', 'TX data'],
- ['rx-start', 'RX start bits'],
- ['tx-start', 'TX start bits'],
- ['rx-parity-ok', 'RX parity OK bits'],
- ['tx-parity-ok', 'TX parity OK bits'],
- ['rx-parity-err', 'RX parity error bits'],
- ['tx-parity-err', 'TX parity error bits'],
- ['rx-stop', 'RX stop bits'],
- ['tx-stop', 'TX stop bits'],
- ['rx-warnings', 'RX warnings'],
- ['tx-warnings', 'TX warnings'],
- ['rx-data-bits', 'RX data bits'],
- ['tx-data-bits', 'TX data bits'],
- ]
+ annotations = (
+ ('rx-data', 'RX data'),
+ ('tx-data', 'TX data'),
+ ('rx-start', 'RX start bits'),
+ ('tx-start', 'TX start bits'),
+ ('rx-parity-ok', 'RX parity OK bits'),
+ ('tx-parity-ok', 'TX parity OK bits'),
+ ('rx-parity-err', 'RX parity error bits'),
+ ('tx-parity-err', 'TX parity error bits'),
+ ('rx-stop', 'RX stop bits'),
+ ('tx-stop', 'TX stop bits'),
+ ('rx-warnings', 'RX warnings'),
+ ('tx-warnings', 'TX warnings'),
+ ('rx-data-bits', 'RX data bits'),
+ ('tx-data-bits', 'TX data bits'),
+ )
annotation_rows = (
('rx-data', 'RX', (0, 2, 4, 6, 8)),
('rx-data-bits', 'RX bits', (12,)),
self.databyte[rxtx] >>= 1
self.databyte[rxtx] |= \
(signal << (self.options['num_data_bits'] - 1))
- elif self.options['bit_order'] == 'msb-first':
+ else:
self.databyte[rxtx] <<= 1
self.databyte[rxtx] |= (signal << 0)
- else:
- raise Exception('Invalid bit order value: %s',
- self.options['bit_order'])
self.putg([rxtx + 12, ['%d' % signal]])
self.putx(rxtx, [rxtx, [oct(b)[2:].zfill(3)]])
elif f == 'bin':
self.putx(rxtx, [rxtx, [bin(b)[2:].zfill(8)]])
- else:
- raise Exception('Invalid data format option: %s' % f)
self.putbin(rxtx, (rxtx, bytes([b])))
self.putbin(rxtx, (2, bytes([b])))
self.putg([rxtx + 4, ['Stop bit', 'Stop', 'T']])
def decode(self, ss, es, data):
- if self.samplerate is None:
- raise Exception("Cannot decode without samplerate.")
+ if not self.samplerate:
+ raise SamplerateError('Cannot decode without samplerate.')
for (self.samplenum, pins) in data:
# Note: Ignoring identical samples here for performance reasons
self.get_parity_bit(rxtx, signal)
elif self.state[rxtx] == 'GET STOP BITS':
self.get_stop_bits(rxtx, signal)
- else:
- raise Exception('Invalid state: %s' % self.state[rxtx])
# Save current RX/TX values for the next round.
self.oldbit[rxtx] = signal