## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
-# 1-Wire protocol decoder (link layer)
-
import sigrokdecode as srd
class Decoder(srd.Decoder):
['presence', 'Presence'],
['overdrive', 'Overdrive mode notifications'],
]
+ annotation_rows = (
+ ('bits', 'Bits', (0, 2, 3)),
+ ('info', 'Info', (4,)),
+ ('warnings', 'Warnings', (1,)),
+ )
def putm(self, data):
self.put(0, 0, self.out_ann, data)
def putpb(self, data):
- self.put(self.fall, self.samplenum, self.out_proto, data)
+ self.put(self.fall, self.samplenum, self.out_python, data)
def putb(self, data):
self.put(self.fall, self.samplenum, self.out_ann, data)
self.put(self.fall, self.rise, self.out_ann, data)
def putprs(self, data):
- self.put(self.rise, self.samplenum, self.out_proto, data)
+ self.put(self.rise, self.samplenum, self.out_python, data)
def putrs(self, data):
self.put(self.rise, self.samplenum, self.out_ann, data)
def __init__(self, **kwargs):
+ self.samplerate = None
self.samplenum = 0
self.state = 'WAIT FOR FALLING EDGE'
self.present = 0
self.fall = 0
self.rise = 0
- def start(self, metadata):
- self.out_proto = self.add(srd.OUTPUT_PROTO, 'onewire_link')
- self.out_ann = self.add(srd.OUTPUT_ANN, 'onewire_link')
+ def start(self):
+ self.out_python = self.register(srd.OUTPUT_PYTHON)
+ self.out_ann = self.register(srd.OUTPUT_ANN)
- self.samplerate = metadata['samplerate']
+ def metadata(self, key, value):
+ if key != srd.SRD_CONF_SAMPLERATE:
+ return
+ self.samplerate = value
# Check if samplerate is appropriate.
if self.options['overdrive'] == 'yes':
'(%2.1fus-%2.1fus) should be inside (7.3us, 10.0us).'
% (time_min*1000000, time_max*1000000)]])
- def report(self):
- pass
-
def decode(self, ss, es, data):
+ if self.samplerate is None:
+ raise Exception("Cannot decode without samplerate.")
for (self.samplenum, (owr, pwr)) in data:
# State machine.
if self.state == 'WAIT FOR FALLING EDGE':
self.state = 'WAIT FOR RISING EDGE'
continue
- self.putb([0, ['Bit: %d' % self.bit]])
+ self.putb([0, ['Bit: %d' % self.bit, '%d' % self.bit]])
self.putpb(['BIT', self.bit])
# Checking the first command to see if overdrive mode
if self.bit_cnt <= 8:
self.command |= (self.bit << self.bit_cnt)
elif self.bit_cnt == 8 and self.command in [0x3c, 0x69]:
- self.putx([4, ['Entering overdrive mode']])
+ self.putx([4, ['Entering overdrive mode', 'Overdrive on']])
# Increment the bit counter.
self.bit_cnt += 1
# Wait for next slot.
# Check if this was a reset cycle.
t = self.samplenum - self.fall
if t > self.cnt_normal_reset:
- # Save the sample number for the falling edge.
+ # Save the sample number for the rising edge.
self.rise = self.samplenum
- self.putfr([2, ['Reset']])
+ self.putfr([2, ['Reset', 'Rst', 'R']])
self.state = 'WAIT FOR PRESENCE DETECT'
# Exit overdrive mode.
if self.overdrive:
- self.putx([4, ['Exiting overdrive mode']])
+ self.putx([4, ['Exiting overdrive mode', 'Overdrive off']])
self.overdrive = 0
# Clear command bit counter and data register.
self.bit_cnt = 0
self.command = 0
elif (t > self.cnt_overdrive_reset) and self.overdrive:
- # Save the sample number for the falling edge.
+ # Save the sample number for the rising edge.
self.rise = self.samplenum
- self.putfr([2, ['Reset']])
+ self.putfr([2, ['Reset', 'Rst', 'R']])
self.state = "WAIT FOR PRESENCE DETECT"
# Otherwise this is assumed to be a data bit.
else:
continue
p = 'false' if self.present else 'true'
- self.putrs([3, ['Presence: %s' % p]])
+ self.putrs([3, ['Presence: %s' % p, 'Presence', 'Pres', 'P']])
self.putprs(['RESET/PRESENCE', not self.present])
# Wait for next slot.