# FIXME: This is just some example input for testing purposes...
example_packets = [
- # START condition.
- {'type': 'S', 'range': (10, 11), 'data': None, 'ann': ''},
-
- # Nunchuk init: Write 0x40,0x00 to slave address 0x54.
- {'type': 'AW', 'range': (12, 13), 'data': 0x54, 'ann': ''},
- {'type': 'DW', 'range': (14, 15), 'data': 0x40, 'ann': ''},
- {'type': 'AW', 'range': (16, 17), 'data': 0x54, 'ann': ''},
- {'type': 'DW', 'range': (18, 19), 'data': 0x00, 'ann': ''},
-
- # Get data: Read 6 bytes of data.
- {'type': 'DR', 'range': (20, 21), 'data': 0x11, 'ann': ''},
- {'type': 'DR', 'range': (22, 23), 'data': 0x22, 'ann': ''},
- {'type': 'DR', 'range': (24, 25), 'data': 0x33, 'ann': ''},
- {'type': 'DR', 'range': (26, 27), 'data': 0x44, 'ann': ''},
- {'type': 'DR', 'range': (28, 29), 'data': 0x55, 'ann': ''},
- {'type': 'DR', 'range': (30, 31), 'data': 0x66, 'ann': ''},
-
- # STOP condition.
- {'type': 'P', 'range': (32, 33), 'data': None, 'ann': ''},
+ # START condition.
+ {'type': 'S', 'range': (10, 11), 'data': None, 'ann': ''},
+
+ # Nunchuk init: Write 0x40,0x00 to slave address 0x54.
+ {'type': 'AW', 'range': (12, 13), 'data': 0x54, 'ann': ''},
+ {'type': 'DW', 'range': (14, 15), 'data': 0x40, 'ann': ''},
+ {'type': 'AW', 'range': (16, 17), 'data': 0x54, 'ann': ''},
+ {'type': 'DW', 'range': (18, 19), 'data': 0x00, 'ann': ''},
+
+ # Get data: Read 6 bytes of data.
+ {'type': 'DR', 'range': (20, 21), 'data': 0x11, 'ann': ''},
+ {'type': 'DR', 'range': (22, 23), 'data': 0x22, 'ann': ''},
+ {'type': 'DR', 'range': (24, 25), 'data': 0x33, 'ann': ''},
+ {'type': 'DR', 'range': (26, 27), 'data': 0x44, 'ann': ''},
+ {'type': 'DR', 'range': (28, 29), 'data': 0x55, 'ann': ''},
+ {'type': 'DR', 'range': (30, 31), 'data': 0x66, 'ann': ''},
+
+ # STOP condition.
+ {'type': 'P', 'range': (32, 33), 'data': None, 'ann': ''},
]
def decode(l):
- print(l)
- sigrok.put(l)
+ print(l)
+ sigrok.put(l)
def decode2(inbuf):
- """Nintendo Wii Nunchuk decoder"""
-
- # FIXME: Get the data in the correct format in the first place.
- inbuf = [ord(x) for x in inbuf]
- out = []
- o = {}
-
- # TODO: Pass in metadata.
-
- # States
- IDLE, START, NUNCHUK_SLAVE, INIT, INITIALIZED = range(5)
- state = IDLE # TODO: Can we assume a certain initial state?
-
- sx = sy = ax = ay = az = bz = bc = 0
-
- databytecount = 0
-
- # Loop over all I2C packets.
- for p in example_packets:
- if p['type'] == 'S': # TODO: Handle 'Sr' here, too?
- state = START
-
- elif p['type'] == 'Sr':
- pass # FIXME
-
- elif p['type'] == 'AR':
- # TODO: Error/Warning, not supported, I think.
- pass
-
- elif p['type'] == 'AW':
- # The Wii Nunchuk always has slave address 0x54.
- # TODO: Handle this stuff more correctly.
- if p['data'] == 0x54:
- pass # TODO
- else:
- pass # TODO: What to do here? Ignore? Error?
-
- elif p['type'] == 'DR' and state == INITIALIZED:
- if databytecount == 0:
- sx = p['data']
- elif databytecount == 1:
- sy = p['data']
- elif databytecount == 2:
- ax = p['data'] << 2
- elif databytecount == 3:
- ay = p['data'] << 2
- elif databytecount == 4:
- az = p['data'] << 2
- elif databytecount == 5:
- bz = (p['data'] & (1 << 0)) >> 0
- bc = (p['data'] & (1 << 1)) >> 1
- ax |= (p['data'] & (3 << 2)) >> 2
- ay |= (p['data'] & (3 << 4)) >> 4
- az |= (p['data'] & (3 << 6)) >> 6
- # del o
- o = {'type': 'D', 'range': (0, 0), 'data': []}
- o['data'] = [sx, sy, ax, ay, az, bz, bc]
- # sx = sy = ax = ay = az = bz = bc = 0
- else:
- pass # TODO
-
- if 0 <= databytecount <= 5:
- databytecount += 1
-
- # TODO: If 6 bytes read -> save and reset
-
- # TODO
- elif p['type'] == 'DR' and state != INITIALIZED:
- pass
-
- elif p['type'] == 'DW':
- if p['data'] == 0x40 and state == START:
- state = INIT
- elif p['data'] == 0x00 and state == INIT:
- o = {'type': 'I', 'range': (0, 0), 'data': []}
- o['data'] = [0x40, 0x00]
- out.append(o)
- state = INITIALIZED
- else:
- pass # TODO
-
- elif p['type'] == 'P':
- out.append(o)
- state = INITIALIZED
- databytecount = 0
-
- print out
-
- # FIXME
- return ''
+ """Nintendo Wii Nunchuk decoder"""
+
+ # FIXME: Get the data in the correct format in the first place.
+ inbuf = [ord(x) for x in inbuf]
+ out = []
+ o = {}
+
+ # TODO: Pass in metadata.
+
+ # States
+ IDLE, START, NUNCHUK_SLAVE, INIT, INITIALIZED = range(5)
+ state = IDLE # TODO: Can we assume a certain initial state?
+
+ sx = sy = ax = ay = az = bz = bc = 0
+
+ databytecount = 0
+
+ # Loop over all I2C packets.
+ for p in example_packets:
+ if p['type'] == 'S': # TODO: Handle 'Sr' here, too?
+ state = START
+
+ elif p['type'] == 'Sr':
+ pass # FIXME
+
+ elif p['type'] == 'AR':
+ # TODO: Error/Warning, not supported, I think.
+ pass
+
+ elif p['type'] == 'AW':
+ # The Wii Nunchuk always has slave address 0x54.
+ # TODO: Handle this stuff more correctly.
+ if p['data'] == 0x54:
+ pass # TODO
+ else:
+ pass # TODO: What to do here? Ignore? Error?
+
+ elif p['type'] == 'DR' and state == INITIALIZED:
+ if databytecount == 0:
+ sx = p['data']
+ elif databytecount == 1:
+ sy = p['data']
+ elif databytecount == 2:
+ ax = p['data'] << 2
+ elif databytecount == 3:
+ ay = p['data'] << 2
+ elif databytecount == 4:
+ az = p['data'] << 2
+ elif databytecount == 5:
+ bz = (p['data'] & (1 << 0)) >> 0
+ bc = (p['data'] & (1 << 1)) >> 1
+ ax |= (p['data'] & (3 << 2)) >> 2
+ ay |= (p['data'] & (3 << 4)) >> 4
+ az |= (p['data'] & (3 << 6)) >> 6
+ # del o
+ o = {'type': 'D', 'range': (0, 0), 'data': []}
+ o['data'] = [sx, sy, ax, ay, az, bz, bc]
+ # sx = sy = ax = ay = az = bz = bc = 0
+ else:
+ pass # TODO
+
+ if 0 <= databytecount <= 5:
+ databytecount += 1
+
+ # TODO: If 6 bytes read -> save and reset
+
+ # TODO
+ elif p['type'] == 'DR' and state != INITIALIZED:
+ pass
+
+ elif p['type'] == 'DW':
+ if p['data'] == 0x40 and state == START:
+ state = INIT
+ elif p['data'] == 0x00 and state == INIT:
+ o = {'type': 'I', 'range': (0, 0), 'data': []}
+ o['data'] = [0x40, 0x00]
+ out.append(o)
+ state = INITIALIZED
+ else:
+ pass # TODO
+
+ elif p['type'] == 'P':
+ out.append(o)
+ state = INITIALIZED
+ databytecount = 0
+
+ print out
+
+ # FIXME
+ return ''
register = {
- 'id': 'nunchuk',
- 'name': 'Nunchuk',
- 'longname': 'Nintendo Wii Nunchuk decoder',
- 'desc': 'Decodes the Nintendo Wii Nunchuk I2C-based protocol.',
- 'longdesc': '...',
- 'author': 'Uwe Hermann',
- 'email': 'uwe@hermann-uwe.de',
- 'license': 'gplv2+',
- 'in': ['i2c'],
- 'out': ['nunchuck'],
- 'probes': [
- # TODO
- ],
- 'options': {
- # TODO
- },
- # 'start': start,
- # 'report': report,
+ 'id': 'nunchuk',
+ 'name': 'Nunchuk',
+ 'longname': 'Nintendo Wii Nunchuk decoder',
+ 'desc': 'Decodes the Nintendo Wii Nunchuk I2C-based protocol.',
+ 'longdesc': '...',
+ 'author': 'Uwe Hermann',
+ 'email': 'uwe@hermann-uwe.de',
+ 'license': 'gplv2+',
+ 'in': ['i2c'],
+ 'out': ['nunchuck'],
+ 'probes': [
+ # TODO
+ ],
+ 'options': {
+ # TODO
+ },
+ # 'start': start,
+ # 'report': report,
}
# Use psyco (if available) as it results in huge performance improvements.
try:
- import psyco
- psyco.bind(decode)
+ import psyco
+ psyco.bind(decode)
except ImportError:
- pass
+ pass
projects / libsigrokdecode.git / blobdiff