Partial implementation of the streaming PD API.

[libsigrokdecode.git] / decoders / i2c.py

diff --git a/decoders/i2c.py b/decoders/i2c.py
index 4e11921399ff21b06b61283ecdae93f953bc73f4..f2b0c2de68fd932bb977aa19d2d0972a11f12720 100644 (file)
--- a/decoders/i2c.py
+++ b/decoders/i2c.py
@@ -125,7 +125,13 @@
 #  'signals': [{'SCL': }]}
 #
 
-def decode(inbuf):
+def decode(l):
+       print(l)
+       sigrok.put(l)
+
+
+
+def decode2(inbuf):
        """I2C protocol decoder"""
 
        # FIXME: Get the data in the correct format in the first place.
@@ -233,28 +239,27 @@ def decode(inbuf):
        # FIXME: Just for testing...
        return str(out)
 
-def register():
-       return {
-               'id': 'i2c',
-               'name': 'I2C',
-               'longname': 'Inter-Integrated Circuit (I2C) bus',
-               'desc': 'I2C is a two-wire, multi-master, serial bus.',
-               'longdesc': '...',
-               'author': 'Uwe Hermann',
-               'email': 'uwe@hermann-uwe.de',
-               'license': 'gplv2+',
-               'in': ['logic'],
-               'out': ['i2c'],
-               'probes': [
-                       ['scl', 'Serial clock line'],
-                       ['sda', 'Serial data line'],
-               ],
-               'options': {
-                       'address-space': ['Address space (in bits)', 7],
-               },
-               # 'start': start,
-               # 'report': report,
-       }
+register = {
+       'id': 'i2c',
+       'name': 'I2C',
+       'longname': 'Inter-Integrated Circuit (I2C) bus',
+       'desc': 'I2C is a two-wire, multi-master, serial bus.',
+       'longdesc': '...',
+       'author': 'Uwe Hermann',
+       'email': 'uwe@hermann-uwe.de',
+       'license': 'gplv2+',
+       'in': ['logic'],
+       'out': ['i2c'],
+       'probes': [
+               ['scl', 'Serial clock line'],
+               ['sda', 'Serial data line'],
+       ],
+       'options': {
+               'address-space': ['Address space (in bits)', 7],
+       },
+       # 'start': start,
+       # 'report': report,
+}
 
 # Use psyco (if available) as it results in huge performance improvements.
 try: