license: remove FSF postal address from boiler plate license text

[libsigrokdecode.git] / decoders / avr_isp / pd.py

diff --git a/decoders/avr_isp/pd.py b/decoders/avr_isp/pd.py
index 8f3e128e1708740b816ccc257fb9de1bece70026..6a3a241015db89f7d21204fa9058a5bd6de06966 100644 (file)
--- a/decoders/avr_isp/pd.py
+++ b/decoders/avr_isp/pd.py
@@ -14,8 +14,7 @@
 ## GNU General Public License for more details.
 ##
 ## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+## along with this program; if not, see <http://www.gnu.org/licenses/>.
 ##
 
 import sigrokdecode as srd
@@ -24,29 +23,26 @@ from .parts import *
 VENDOR_CODE_ATMEL = 0x1e
 
 class Decoder(srd.Decoder):
-    api_version = 1
+    api_version = 2
     id = 'avr_isp'
     name = 'AVR ISP'
     longname = 'AVR In-System Programming'
     desc = 'Protocol for in-system programming Atmel AVR MCUs.'
     license = 'gplv2+'
-    inputs = ['spi', 'logic']
+    inputs = ['spi']
     outputs = ['avr_isp']
-    optional_probes = [
-        {'id': 'reset', 'name': 'RESET#', 'desc': 'Target AVR MCU reset'},
-    ]
-    annotations = [
-        ['pe', 'Programming enable'],
-        ['rsb0', 'Read signature byte 0'],
-        ['rsb1', 'Read signature byte 1'],
-        ['rsb2', 'Read signature byte 2'],
-        ['ce', 'Chip erase'],
-        ['rfb', 'Read fuse bits'],
-        ['rhfb', 'Read high fuse bits'],
-        ['refb', 'Read extended fuse bits'],
-        ['warnings', 'Warnings'],
-        ['dev', 'Device'],
-    ]
+    annotations = (
+        ('pe', 'Programming enable'),
+        ('rsb0', 'Read signature byte 0'),
+        ('rsb1', 'Read signature byte 1'),
+        ('rsb2', 'Read signature byte 2'),
+        ('ce', 'Chip erase'),
+        ('rfb', 'Read fuse bits'),
+        ('rhfb', 'Read high fuse bits'),
+        ('refb', 'Read extended fuse bits'),
+        ('warnings', 'Warnings'),
+        ('dev', 'Device'),
+    )
     annotation_rows = (
         ('bits', 'Bits', ()),
         ('commands', 'Commands', tuple(range(7 + 1))),
@@ -54,19 +50,18 @@ class Decoder(srd.Decoder):
         ('dev', 'Device', (9,)),
     )
 
-    def __init__(self, **kwargs):
+    def __init__(self):
         self.state = 'IDLE'
         self.mosi_bytes, self.miso_bytes = [], []
-        self.cmd_ss, self.cmd_es = 0, 0
+        self.ss_cmd, self.es_cmd = 0, 0
         self.xx, self.yy, self.zz, self.mm = 0, 0, 0, 0
-        self.device_ss = None
+        self.ss_device = None
 
     def start(self):
-        # self.out_python = self.register(srd.OUTPUT_PYTHON)
         self.out_ann = self.register(srd.OUTPUT_ANN)
 
     def putx(self, data):
-        self.put(self.cmd_ss, self.cmd_es, self.out_ann, data)
+        self.put(self.ss_cmd, self.es_cmd, self.out_ann, data)
 
     def handle_cmd_programming_enable(self, cmd, ret):
         # Programming enable.
@@ -103,7 +98,7 @@ class Decoder(srd.Decoder):
 
         # Store for later.
         self.mm = cmd[3]
-        self.device_ss = self.cmd_ss
+        self.ss_device = self.ss_cmd
 
         # Sanity check on reply.
         if ret[1] != 0x30 or ret[2] != cmd[1] or ret[0] != self.yy:
@@ -116,7 +111,7 @@ class Decoder(srd.Decoder):
 
         p = part[(self.part_fam_flash_size, self.part_number)]
         data = [9, ['Device: Atmel %s' % p]]
-        self.put(self.device_ss, self.cmd_es, self.out_ann, data)
+        self.put(self.ss_device, self.es_cmd, self.out_ann, data)
 
         # Sanity check on reply.
         if ret[1] != 0x30 or ret[2] != self.xx or ret[0] != self.mm:
@@ -196,7 +191,7 @@ class Decoder(srd.Decoder):
         self.ss, self.es = ss, es
 
         if len(self.mosi_bytes) == 0:
-            self.cmd_ss = ss
+            self.ss_cmd = ss
 
         # Append new bytes.
         self.mosi_bytes.append(mosi)
@@ -206,10 +201,9 @@ class Decoder(srd.Decoder):
         if len(self.mosi_bytes) < 4:
             return
 
-        self.cmd_es = es
+        self.es_cmd = es
 
         self.handle_command(self.mosi_bytes, self.miso_bytes)
 
         self.mosi_bytes = []
         self.miso_bytes = []
-