]> sigrok.org Git - libsigrokdecode.git/blob - decoders/i2cfilter/pd.py
c0f9a0b14c36ec1072c39c08c7f6f84d80da8f55
[libsigrokdecode.git] / decoders / i2cfilter / pd.py
1 ##
2 ## This file is part of the libsigrokdecode project.
3 ##
4 ## Copyright (C) 2012 Bert Vermeulen <bert@biot.com>
5 ## Copyright (C) 2012 Uwe Hermann <uwe@hermann-uwe.de>
6 ##
7 ## This program is free software; you can redistribute it and/or modify
8 ## it under the terms of the GNU General Public License as published by
9 ## the Free Software Foundation; either version 3 of the License, or
10 ## (at your option) any later version.
11 ##
12 ## This program is distributed in the hope that it will be useful,
13 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
14 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15 ## GNU General Public License for more details.
16 ##
17 ## You should have received a copy of the GNU General Public License
18 ## along with this program; if not, see <http://www.gnu.org/licenses/>.
19 ##
20
21 # Generic I2C filtering protocol decoder
22
23 # TODO: Support for filtering out multiple slave/direction pairs?
24
25 import sigrokdecode as srd
26
27 class Decoder(srd.Decoder):
28     api_version = 1
29     id = 'i2cfilter'
30     name = 'I2C filter'
31     longname = 'I2C filter'
32     desc = 'Filter out addresses/directions in an I2C stream.'
33     license = 'gplv3+'
34     inputs = ['i2c']
35     outputs = ['i2c']
36     probes = []
37     optional_probes = []
38     options = {
39         'address': ['Address to filter out of the I2C stream', 0],
40         'direction': ['Direction to filter (read/write/both)', 'both']
41     }
42     annotations = []
43
44     def __init__(self, **kwargs):
45         self.state = None
46         self.curslave = -1
47         self.curdirection = None
48         self.packets = [] # Local cache of I2C packets
49
50     def start(self):
51         self.out_proto = self.add(srd.OUTPUT_PROTO, 'i2c')
52         if self.options['address'] not in range(0, 127 + 1):
53             raise Exception('Invalid slave (must be 0..127).')
54         if self.options['direction'] not in ('both', 'read', 'write'):
55             raise Exception('Invalid direction (valid: read/write/both).')
56
57     def report(self):
58         pass
59
60     # Grab I2C packets into a local cache, until an I2C STOP condition
61     # packet comes along. At some point before that STOP condition, there
62     # will have been an ADDRESS READ or ADDRESS WRITE which contains the
63     # I2C address of the slave that the master wants to talk to.
64     # If that slave shall be filtered, output the cache (all packets from
65     # START to STOP) as proto 'i2c', otherwise drop it.
66     def decode(self, ss, es, data):
67
68         cmd, databyte = data
69
70         # Add the I2C packet to our local cache.
71         self.packets.append([ss, es, data])
72
73         if cmd in ('ADDRESS READ', 'ADDRESS WRITE'):
74             self.curslave = databyte
75             self.curdirection = cmd[8:].lower()
76         elif cmd in ('STOP', 'START REPEAT'):
77             # If this chunk was not for the correct slave, drop it.
78             if self.options['address'] == 0:
79                 pass
80             elif self.curslave != self.options['address']:
81                 self.packets = []
82                 return
83
84             # If this chunk was not in the right direction, drop it.
85             if self.options['direction'] == 'both':
86                 pass
87             elif self.options['direction'] != self.curdirection:
88                 self.packets = []
89                 return
90
91             # TODO: START->STOP chunks with both read and write (Repeat START)
92             # Otherwise, send out the whole chunk of I2C packets.
93             for p in self.packets:
94                 self.put(p[0], p[1], self.out_proto, p[2])
95
96             self.packets = []
97         else:
98             pass # Do nothing, only add the I2C packet to our cache.
99