]> sigrok.org Git - libsigrok.git/shortlog
libsigrok.git
2021-09-10 Soeren Apelkingst-la2016: Minor style fixes
2021-09-10 Kevin Grantkingst-la2016: add support for kingst la1016
2021-09-10 Kevin Grantkingst-la2016: avoid filling the log file with redundan...
2021-09-10 Kevin Grantkingst-la2016: add support for both LA2016 hardware...
2021-09-10 Kevin Grantkingst-la2016: remove unnecessary initialisation code
2021-09-10 Kevin Grantkingst-la2016: fix segfault that often occurs when...
2021-09-10 Kevin Grantkingst-la2016: fix fpga register alignment for sampling...
2021-09-10 Kevin Grantkingst-la2016: fix input threshold adjustment
2021-09-10 Kevin Grantkingst-la2016: fix the fpga register addresses
2021-09-10 Kevin Grantkingst-la2016: replace usb control transfer brequest...
2021-09-10 v1neols: Fix off-by-one when setting up trigger stages
2021-09-10 v1neols: Fix demuxer operation
2021-09-10 v1neols: Don't silently ignore error when setting up the...
2021-09-10 v1neols: Don't store temporary data in device context
2021-09-10 v1neols: Provide sample count in RLE mode
2021-09-10 v1neols: Clean up: Obey code style
2021-08-28 Martin Atkinsscpi-pps: Support for the EEZ PSU series
2021-08-28 Martin Atkinsscpi-pps: Data capture dynamically-probed channels
2021-08-23 Tim Van HelleputteAdd support for TENMA 72-2710 V6.6 power supply
2021-08-22 Frank Stettneritech-it8500: Remove SR_MQFLAG_DC from power values.
2021-08-14 Frank Stettnerhp-59306a: Rename channel groups from CHn to Rn
2021-08-14 Frank Stettnerhp-59306a: Add GET for config key SR_CONF_CONN
2021-08-14 Frank Stettnerhp-59306a: Enable/disable all outputs at once.
2021-08-04 Gerhard Sittiginput/saleae: silence overzealous compiler warning
2021-08-04 Gerhard Sittigdmm/bm52x: silence overzealous compiler warning
2021-08-04 Gerhard Sittigtests: unbreak endianess conversion test routine (too...
2021-08-04 Gerhard Sittigdoc: update README.devices for conn=sn=<serno> (driver...
2021-08-04 Gerhard Sittigdcttech-usbrelay: accept conn=sn=<serno> user specs...
2021-07-23 Frank Stettnerconrad-digi-35-cpu: Remove CH1 from device.
2021-07-23 Gerhard Sittigdcttech-usbrelay: support conn=vid.pid specs in additio...
2021-07-23 Gerhard Sittigdcttech-usbrelay: accept conn= spec different from...
2021-07-22 Gerhard Sittigdcttech-usbrelay: rework scan (enumeration) and probe...
2021-07-22 Gerhard Sittigdcttech-usbrelay: adjust serial number and connection...
2021-07-21 Gerhard Sittigcontrib: add udev rule for V-USB based HID devices...
2021-07-21 Gerhard Sittigdcttech-usbrelay: implement multiplexer driver for...
2021-07-21 Gerhard Sittigdcttech-usbrelay: Initial driver skeleton.
2021-07-03 Frank Stettnerhp-3478a: Fix switching from 4-wire to 2-wire measurement.
2021-06-30 Frank Stettnerhp-3478a: Only match when conn= is given to avoid false...
2021-06-30 Frank Stettnerscpi_vxi: Unbreak MacOS build (vxi.h inclusion order).
2021-06-28 Gerhard Sittighp-3478a: avoid NULL dereference in config API routines
2021-06-16 Gerhard Sittigdoc: update IRC reference to Libera.Chat
2021-06-07 Ralfrigol-ds: fix use-after-free
2021-06-07 Daniel Anselmiscpi_vxi: fix memory leak for SCPI response data in...
2021-06-07 Gerhard Sittigscpi_vxi: readability nits in the SCPI via VXI source...
2021-06-01 Sylvain Pelissiercontrib: add udev rule for Agilent 34460A USBTMC
2021-06-01 Sylvain Pelissierscpi-dmm: Add support for Agilent 34460A
2021-06-01 Gerhard Sittigscpi-dmm: add short measurement delay for 34465A
2021-06-01 Gerhard Sittigscpi-dmm: model and MQ dependent delay before measurement
2021-06-01 Gerhard Sittigscpi-dmm: model and MQ dependent delay when switching...
2021-06-01 Gerhard Sittigscpi-dmm: use different Agilent SCPI command for range...
2021-06-01 Gerhard Sittigscpi-dmm: rephrase read timeout decls, put "unit" after...
2021-06-01 Gerhard Sittigfluke-45: drop serial port echo test, was disabled...
2021-06-01 Gerhard Sittighp-3457a: only probe when conn= was specified, to not...
2021-06-01 Gerhard Sittigscpi-pps: don't break SCPI devices when scanning for...
2021-06-01 Gerhard Sittigscpi: style nits in sr_scpi_scan(), prefer common helper
2021-06-01 Gerhard Sittigsiglent-sds: move model dependent request emission...
2021-06-01 Gerhard Sittighp-59306a: only match when conn= is given to avoid...
2021-06-01 Gerhard Sittigmotech-lps-301: make better use of serial extract optio...
2021-06-01 Gerhard Sittigserial: extend semantics of connection and comm params...
2021-05-22 Gerhard Sittigscpi-dmm: avoid get/set range calls for some of the...
2021-05-22 Gerhard Sittigscpi-dmm: add four-wire resistance to list of 34405A MQs
2021-05-22 Gerhard Sittigscpi-dmm: prepare introduction of per-MQ driver flags
2021-05-22 Gerhard Sittigscpi-dmm: add support to get/set range on Agilent proto...
2021-05-22 Gerhard Sittigscpi-dmm: use INIT instead of MEAS for Agilent to start...
2021-05-22 Gerhard Sittigscpi-dmm: Keysight 34465A is a 6.5 digit meter, bump...
2021-05-22 Gerhard Sittigscpi-dmm: move OPC availability check to after IDN...
2021-05-22 Gerhard Sittigcontrib: add udev rule for Keysight USBTMC
2021-05-22 Gerhard Sittigsiglent-sds: prefer common glib routine to get vector...
2021-05-22 Gerhard Sittigscpi: readability nits in vector getters, style nit...
2021-05-22 Gerhard Sittigsiglent-sds: free memory that was allocated by SCPI...
2021-05-22 Gerhard Sittighameg-hmo: free memory that was allocated by SCPI get...
2021-05-22 Gerhard Sittigrigol-ds: free memory that was allocated by SCPI get...
2021-05-22 Gerhard Sittigscpi-dmm: free memory that was allocated by SCPI get...
2021-05-22 Gerhard Sittigrigol-dg: free memory that was allocated by SCPI get...
2021-05-22 Gerhard Sittiglecroy-xstream: free memory that was allocated by SCPI...
2021-05-22 Gerhard Sittighp-3457a: style nits in the probe routine
2021-05-22 Gerhard Sittighp-3457a: free memory that was allocated by SCPI get...
2021-05-22 Gerhard Sittigfluke-45: free memory that was allocated by SCPI get...
2021-05-22 Gerhard Sittigscpi: document callers' responsibility to free getters...
2021-05-22 Gerhard Sittigscpi: make sure to either return valid SCPI response...
2021-05-22 Gerhard Sittigserial_libsp: extend diag in code path which opens...
2021-05-16 Rafael G. Martinsserial-dmm: Add PeakTech 2025 meter support.
2021-05-09 Frank Stettnerrdtech-dps: Add missing devc initialisation.
2021-04-25 Gerhard Sittigcontrib/60-libsigrok.rules: add udev rule for Microchip...
2021-04-25 Gerhard Sittiginput/csv: trim surrounding whitespace from header...
2021-04-25 Gerhard Sittigrdtech-dps: research to reduce serial comm transfer...
2021-04-25 Gerhard Sittigrdtech-dps: introduce support for RD6006 and other...
2021-04-25 Gerhard Sittigrdtech-dps: layer separation between API and protocol...
2021-04-25 Frank Stettnerhp-59306a: Initial HP 59306A driver.
2021-04-24 Frank Stettnerhp-59306a: Initial driver skeleton.
2021-04-24 Frank StettnerAdd device type SR_CONF_MULTIPLEXER.
2021-03-28 Soeren ApelAmend #119 to use vector instead of tuple
2021-03-16 Gerhard Sittigkingst-la2016: address trivial style nits (whitespace...
2021-03-16 Helge Krusekingst-la2016: Eliminate non-portable packed structs...
2021-03-16 Helge Krusekingst-la2016: Use common code to send trigger and...
2021-03-16 Gerhard Sittigtests: extend endianess conversion tests to also cover...
2021-03-16 Gerhard Sittiglibsigrok-internal.h: add 48bit endianess aware byte...
2021-03-16 Helge Krusekingst-la2016: Upload firmware to correct USB configura...
2021-03-16 Frank Stettnerkorad-kaxxxxp: Add support for Korad KD3005P V2.1
2021-03-06 Petteri Aimonenscpi-dmm: Add support for Owon XDM2041
next