| 2020-10-06 |
Timo Kokkonen | itech-it8500: Initial driver skeleton.
|
commit | commitdiff | tree |
| 2020-10-06 |
Timo Kokkonen | hwdriver: New entries for DC Load "CW" (Power) and...
|
commit | commitdiff | tree |
| 2020-10-06 |
Gerhard Sittig | dmm/metex14: unbreak packet request helper return code
|
commit | commitdiff | tree |
| 2020-10-06 |
Gerhard Sittig | README.devices: add JTAGulator section for Logic Analyzer...
|
commit | commitdiff | tree |
| 2020-10-04 |
Gerhard Sittig | input/csv: trim cell content before conversion
|
commit | commitdiff | tree |
| 2020-10-04 |
Timo Kokkonen | rigol-dg: Fix reading current output signal duty cycle...
|
commit | commitdiff | tree |
| 2020-10-04 |
Timo Kokkonen | rigol-dg: Add Rigol DG800 and DG900 series support.
|
commit | commitdiff | tree |
| 2020-10-04 |
Timo Kokkonen | udev: Add Rigol DG800 and DG900 series VID/PID.
|
commit | commitdiff | tree |
| 2020-10-03 |
Gerhard Sittig | pce-322a: unbreak send_command() return code
|
commit | commitdiff | tree |
| 2020-09-28 |
Gerhard Sittig | rigol-dg: reduce redundancy in malloc() calls
|
commit | commitdiff | tree |
| 2020-09-28 |
Timo Kokkonen | udev: Add Rigol DG1000z Series VID/PID.
|
commit | commitdiff | tree |
| 2020-09-28 |
Timo Kokkonen | rigol-dg: Initial Rigol DG1000z driver implementation.
|
commit | commitdiff | tree |
| 2020-09-28 |
Timo Kokkonen | rigol-dg: Initial driver skeleton.
|
commit | commitdiff | tree |
| 2020-09-28 |
Timo Kokkonen | hwdriver: Add SR_CONF_DUTY_CYCLE & SR_CONF_PHASE.
|
commit | commitdiff | tree |
| 2020-09-27 |
Ralf | scpi: accept numbers like 4.0000E3 as integer value
|
commit | commitdiff | tree |
| 2020-09-27 |
Gerhard Sittig | serial: lower severity of failed stream detect message
|
commit | commitdiff | tree |
| 2020-09-27 |
Gerhard Sittig | ols: more robust device reset in acquisition stop
|
commit | commitdiff | tree |
| 2020-09-21 |
Gerhard Sittig | brymen-dmm: unbreak dBm reference impedance interpretation
|
commit | commitdiff | tree |
| 2020-09-21 |
Gerhard Sittig | brymen-dmm: unbreak temperature response parsing
|
commit | commitdiff | tree |
| 2020-09-21 |
Gerhard Sittig | brymen-dmm: rephrase bfunc and value text parsing
|
commit | commitdiff | tree |
| 2020-09-21 |
Gerhard Sittig | brymen-dmm: improve text to number conversion robustness...
|
commit | commitdiff | tree |
| 2020-09-20 |
Gerhard Sittig | brymen-dmm: style nits, apply comm param defaults,...
|
commit | commitdiff | tree |
| 2020-09-20 |
Gerhard Sittig | brymen-dmm: unbreak BM85x communication by pulsing...
|
commit | commitdiff | tree |
| 2020-09-20 |
Gerhard Sittig | serial: add routine to manipulate handshake state ...
|
commit | commitdiff | tree |
| 2020-09-20 |
Gerhard Sittig | serial: rephrase check for speed (bitrate) in parameter...
|
commit | commitdiff | tree |
| 2020-09-19 |
Gerhard Sittig | dmm/bm52x: introduce support for Brymen BM525s
|
commit | commitdiff | tree |
| 2020-09-19 |
Gerhard Sittig | serial-dmm: only do bytes to text conversion at higher...
|
commit | commitdiff | tree |
| 2020-09-18 |
Gerhard Sittig | input/csv: provide double precision values to session...
|
commit | commitdiff | tree |
| 2020-09-18 |
Gerhard Sittig | analog.c: rephrase analog feed to float conversion...
|
commit | commitdiff | tree |
| 2020-09-18 |
Gerhard Sittig | libsigrok-internal.h: add more endianess aware stream...
|
commit | commitdiff | tree |
| 2020-09-18 |
Gerhard Sittig | tests/analog: add more tests for analog feed to float...
|
commit | commitdiff | tree |
| 2020-09-18 |
Timo Kokkonen | analog.c: sr_analog_to_float(): Support for receiving...
|
commit | commitdiff | tree |
| 2020-09-02 |
Gerhard Sittig | input/saleae: improve L2D undersampling, do provide...
|
commit | commitdiff | tree |
| 2020-09-01 |
Gerhard Sittig | korad-kaxxxxp: remove obsolete code (clear before read...
|
commit | commitdiff | tree |
| 2020-09-01 |
Gerhard Sittig | korad-kaxxxxp: speed up scan process, rephrase response...
|
commit | commitdiff | tree |
| 2020-08-28 |
Gerhard Sittig | korad-kaxxxxp: style cleanup in device scan, keep serno...
|
commit | commitdiff | tree |
| 2020-08-26 |
Gerhard Sittig | input/saleae: keep previous channels across cleanup...
|
commit | commitdiff | tree |
| 2020-08-25 |
Gerhard Sittig | scpi-pps: use remote and local modes for HMP4000
|
commit | commitdiff | tree |
| 2020-08-25 |
Gerhard Sittig | scpi-pps: Add more HMP4000 series devices
|
commit | commitdiff | tree |
| 2020-08-25 |
Florian Schmidt | scpi-pps: add support for Hameg / Rohde & Schwarz HMP4040
|
commit | commitdiff | tree |
| 2020-08-25 |
Gerhard Sittig | doc: update README.devices for GWInstek VCP (CP210x...
|
commit | commitdiff | tree |
| 2020-08-25 |
Gerhard Sittig | scpi_serial: add "GWInstek VCP" (PID 0x0030) as seen...
|
commit | commitdiff | tree |
| 2020-08-25 |
Gerhard Sittig | scpi-dmm: factor out some OL detection limits
|
commit | commitdiff | tree |
| 2020-08-25 |
Gerhard Sittig | scpi-dmm: add SR_CONF_CONN getter
|
commit | commitdiff | tree |
| 2020-08-24 |
v1ne | ols: Detect Demon Core, use its canonic command names
|
commit | commitdiff | tree |
| 2020-08-24 |
v1ne | ols: Refactor, deduplicate logic packet code
|
commit | commitdiff | tree |
| 2020-08-24 |
v1ne | ols: Use symbolic name for "success" error code.
|
commit | commitdiff | tree |
| 2020-08-24 |
v1ne | ols: Make constant names more precise, clarify comment
|
commit | commitdiff | tree |
| 2020-08-24 |
v1ne | ols: Rename "flags" to "capture flags".
|
commit | commitdiff | tree |
| 2020-08-24 |
v1ne | ols: Symbolic name for magic value, reflect units in...
|
commit | commitdiff | tree |
| 2020-08-24 |
v1ne | ols: Remove stray command
|
commit | commitdiff | tree |
| 2020-08-24 |
v1ne | ols: Make use of zero-initialization.
|
commit | commitdiff | tree |
| 2020-08-22 |
Frank Stettner | libsigrok.h: Add Joule, Coulomb, and Ah units.
|
commit | commitdiff | tree |
| 2020-08-22 |
Frank Stettner | libsigrok.h: Add MQ for electric charge.
|
commit | commitdiff | tree |
| 2020-08-22 |
Frank Stettner | teleinfo: Fix measured quantity (energy, not power).
|
commit | commitdiff | tree |
| 2020-08-22 |
Gerhard Sittig | output/csv: always generate text for analog/logic data...
|
commit | commitdiff | tree |
| 2020-08-22 |
Gerhard Sittig | output/csv: check unsupported/untested input signal...
|
commit | commitdiff | tree |
| 2020-08-22 |
Timo Kokkonen | README.devices: Document enabling GW Instek GDM-397...
|
commit | commitdiff | tree |
| 2020-08-22 |
Timo Kokkonen | serial-dmm: Add GW Instek GDM-397 meter support.
|
commit | commitdiff | tree |
| 2020-08-22 |
Gerhard Sittig | korad-kaxxxxp: add support for forced "detection" of...
|
commit | commitdiff | tree |
| 2020-08-22 |
Gerhard Sittig | hwdriver: introduce SR_CONF_FORCE_DETECT config key...
|
commit | commitdiff | tree |
| 2020-08-22 |
Gerhard Sittig | korad-kaxxxxp: add config_get() support for SR_CONF_CONN
|
commit | commitdiff | tree |
| 2020-08-17 |
Gerhard Sittig | scpi-dmm: alpha-sort the list of supported devices...
|
commit | commitdiff | tree |
| 2020-08-17 |
Gerhard Sittig | scpi-dmm: minor style adjustment (gdm906x, analog init...
|
commit | commitdiff | tree |
| 2020-08-17 |
Gerhard Sittig | scpi: Raise severity when IDN response lacks the serial...
|
commit | commitdiff | tree |
| 2020-08-17 |
Gerhard Sittig | scpi_serial: Rephrase NL and NL+CR line termination...
|
commit | commitdiff | tree |
| 2020-08-17 |
Timo Kokkonen | scpi_serial: Add GW-Instek GPD-9061 (USBCDC mode) VID...
|
commit | commitdiff | tree |
| 2020-08-17 |
Timo Kokkonen | udev: Add GW-Instek GDM-9061 VID/PID.
|
commit | commitdiff | tree |
| 2020-08-17 |
Timo Kokkonen | scpi-dmm: Add support for GW-Instek 906X series bench...
|
commit | commitdiff | tree |
| 2020-08-17 |
Timo Kokkonen | scpi-dmm: Add support for GW-Instek 8200A series bench...
|
commit | commitdiff | tree |
| 2020-08-17 |
Timo Kokkonen | scpi: Support devices that omit serial number in *IDN...
|
commit | commitdiff | tree |
| 2020-08-17 |
Timo Kokkonen | scpi_serial: Add support for (broken) devices sending...
|
commit | commitdiff | tree |
| 2020-08-09 |
Gerhard Sittig | serial_hid: add iokit= prefix for the Mac IOKit special...
|
commit | commitdiff | tree |
| 2020-08-05 |
Gerhard Sittig | output/csv: complete and improve timestamp construction...
|
commit | commitdiff | tree |
| 2020-08-05 |
Earle F. Philhower... | output/csv: Avoid accumulated timestamp error for odd...
|
commit | commitdiff | tree |
| 2020-08-03 |
Timo Kokkonen | gwinstek-gpd: Add missing SW limits API calls.
|
commit | commitdiff | tree |
| 2020-08-03 |
Gerhard Sittig | sw_limits: add const for limits param for config_get
|
commit | commitdiff | tree |
| 2020-08-01 |
Gerhard Sittig | serial: make failed flush() in open() non-fatal, CP2110...
|
commit | commitdiff | tree |
| 2020-08-01 |
Timo Kokkonen | gwinstek-gpd: Add support to old (hardware) revision...
|
commit | commitdiff | tree |
| 2020-07-31 |
Timo Kokkonen | gwinstek-gpd: Add support for GPD-3303S.
|
commit | commitdiff | tree |
| 2020-07-31 |
Gerhard Sittig | output/ascii: data type nits, rephrase sample bit access
|
commit | commitdiff | tree |
| 2020-07-31 |
Gerhard Sittig | output/ascii: style nits in name alignment and trigger...
|
commit | commitdiff | tree |
| 2020-07-31 |
v1ne | output/ascii: Also print trigger marker for "short...
|
commit | commitdiff | tree |
| 2020-07-31 |
v1ne | output/ascii: Vertically align logic channel names
|
commit | commitdiff | tree |
| 2020-07-31 |
v1ne | output/ascii: Remove unused variable
|
commit | commitdiff | tree |
| 2020-07-28 |
milan hauth | analog: avoid double free in '-O analog' shutdown path
|
commit | commitdiff | tree |
| 2020-07-27 |
Gerhard Sittig | output/srzip: improve robustness (analog-only acquisition)
|
commit | commitdiff | tree |
| 2020-07-26 |
Wolfram Sang | serial: flush() after open() in the serial core.
|
commit | commitdiff | tree |
| 2020-07-26 |
Gerhard Sittig | bt: drop bt_put_le16() dependency (not universally...
|
commit | commitdiff | tree |
| 2020-07-24 |
Gerhard Sittig | input: use common support to send samplerate meta packet
|
commit | commitdiff | tree |
| 2020-07-24 |
Gerhard Sittig | input/saleae: reduce the format match routine's greed
|
commit | commitdiff | tree |
| 2020-07-24 |
Gerhard Sittig | input/saleae: introduce input module for Saleae Logic...
|
commit | commitdiff | tree |
| 2020-07-24 |
Gerhard Sittig | libsigrok-internal: add endianess helpers for floating...
|
commit | commitdiff | tree |
| 2020-07-24 |
Gerhard Sittig | input/vcd: unbreak the logic which skips a user specified...
|
commit | commitdiff | tree |
| 2020-07-24 |
Gerhard Sittig | output/srzip: queue samples before ZIP operation
|
commit | commitdiff | tree |
| 2020-07-24 |
Gerhard Sittig | output/vcd: support analog data, more channels, minor...
|
commit | commitdiff | tree |
| 2020-07-24 |
Gerhard Sittig | input/vcd: rework VCD file import logic (vector, integer...
|
commit | commitdiff | tree |
| 2020-07-24 |
Gerhard Sittig | input: introduce helper for buffered submission of...
|
commit | commitdiff | tree |
| 2020-07-23 |
Gerhard Sittig | input/binary: align sr_session_send() chunks to unit...
|
commit | commitdiff | tree |
| 2020-05-31 |
Gerhard Sittig | asix-sigma: discuss usability of data pattern trigger...
|
commit | commitdiff | tree |
| next |
projects / libsigrok.git / search