| 2021-03-16 |
Gerhard Sittig | libsigrok-internal.h: add 48bit endianess aware byte...
|
commit | commitdiff | tree |
| 2021-03-16 |
Helge Kruse | kingst-la2016: Upload firmware to correct USB configuration 1
|
commit | commitdiff | tree |
| 2021-03-16 |
Frank Stettner | korad-kaxxxxp: Add support for Korad KD3005P V2.1
|
commit | commitdiff | tree |
| 2021-03-06 |
Petteri Aimonen | scpi-dmm: Add support for Owon XDM2041
|
commit | commitdiff | tree |
| 2021-03-06 |
Petteri Aimonen | scpi-dmm: Gracefully handle meters that lack OPC command.
|
commit | commitdiff | tree |
| 2021-03-06 |
Petteri Aimonen | scpi-dmm: Add infinity limit to model-specific config.
|
commit | commitdiff | tree |
| 2021-02-02 |
Gerhard Sittig | scpi-pps: add R&S HMP2000 model specs
|
commit | commitdiff | tree |
| 2021-02-02 |
Gerhard Sittig | scpi-pps: adjust R&S HMP4000 current resolution for...
|
commit | commitdiff | tree |
| 2021-01-06 |
v1ne | ols: Clean up: Replace hand-rolled byte order conversion...
|
commit | commitdiff | tree |
| 2021-01-06 |
v1ne | ols: Refactor: Extract trigger setup into private place
|
commit | commitdiff | tree |
| 2021-01-06 |
v1ne | ols: Make external clock setting queriable
|
commit | commitdiff | tree |
| 2021-01-06 |
v1ne | ols: Add option to use the falling edge of the external...
|
commit | commitdiff | tree |
| 2021-01-06 |
v1ne | ols: Clear "disabled groups" flags before setting them
|
commit | commitdiff | tree |
| 2021-01-06 |
v1ne | ols: Display actual expanded sample instead of the...
|
commit | commitdiff | tree |
| 2021-01-06 |
v1ne | ols: Clean up: Prefix private function for consistency
|
commit | commitdiff | tree |
| 2021-01-05 |
Gerhard Sittig | doc: update README.devices for Meterman 38XR (RS232...
|
commit | commitdiff | tree |
| 2021-01-05 |
Peter Skarpetis | dmm/mm38xr: introduce DMM packet parser for Meterman...
|
commit | commitdiff | tree |
| 2021-01-05 |
Gerhard Sittig | serial-dmm: move Mastek items after Metex in the model...
|
commit | commitdiff | tree |
| 2021-01-04 |
Frank Stettner | arachnid-labs-re-load-pro: Fix for get voltage and...
|
commit | commitdiff | tree |
| 2020-12-29 |
Gerhard Sittig | dmm/bm52x: unbreak build when serial comm is not available
|
commit | commitdiff | tree |
| 2020-12-25 |
Ralf | fx2lafw: Unbreak SR_CONF_LIMIT_SAMPLES for large values...
|
commit | commitdiff | tree |
| 2020-12-25 |
Gerhard Sittig | ftdi-la: work around missing USB strings during device...
|
commit | commitdiff | tree |
| 2020-11-28 |
Niklas Thorne | asix-sigma: parse serial numbers as unsigned values
|
commit | commitdiff | tree |
| 2020-11-17 |
Niklas Thorne | strutil: introduce sr_atoul_base() conversion helper...
|
commit | commitdiff | tree |
| 2020-11-05 |
Gerhard Sittig | driver_list: unbreak list of builtin drivers for LTO...
|
commit | commitdiff | tree |
| 2020-10-26 |
Gerhard Sittig | libsigrok-internal.h: add u64be endianess writer
|
commit | commitdiff | tree |
| 2020-10-22 |
Gerhard Sittig | serial-dmm: add support for the Brymen BM820s family
|
commit | commitdiff | tree |
| 2020-10-22 |
Gerhard Sittig | dmm/bm52x: add support for recorded measurements (memory...
|
commit | commitdiff | tree |
| 2020-10-22 |
Gerhard Sittig | brymen-dmm: remove obsolete driver (support has moved...
|
commit | commitdiff | tree |
| 2020-10-22 |
Gerhard Sittig | dmm/bm85x: introduce DMM packet parser for Brymen BM850...
|
commit | commitdiff | tree |
| 2020-10-22 |
Gerhard Sittig | strutil: add text to float conversion which also gets...
|
commit | commitdiff | tree |
| 2020-10-22 |
Gerhard Sittig | serial-dmm: more DMM parser callbacks (open, var length...
|
commit | commitdiff | tree |
| 2020-10-22 |
Gerhard Sittig | serial: extend stream detect for variable length packet...
|
commit | commitdiff | tree |
| 2020-10-22 |
Gerhard Sittig | input/vcd: fix a divide by zero bug in the analog-only...
|
commit | commitdiff | tree |
| 2020-10-18 |
Gerhard Sittig | input/vcd: suggest downsampling to users for reduced...
|
commit | commitdiff | tree |
| 2020-10-18 |
Gerhard Sittig | input/vcd: unbreak U and - values for single bit input...
|
commit | commitdiff | tree |
| 2020-10-09 |
Soeren Apel | configure: Add optional TI-RPC dependency, unbreak...
|
commit | commitdiff | tree |
| 2020-10-06 |
Timo Kokkonen | rigol-dg: Add device/firmware specific quirks support.
|
commit | commitdiff | tree |
| 2020-10-06 |
Gerhard Sittig | itech-it8500: avoid "new" as a variable identifier
|
commit | commitdiff | tree |
| 2020-10-06 |
Gerhard Sittig | itech-it8500: declaration nits
|
commit | commitdiff | tree |
| 2020-10-06 |
Gerhard Sittig | itech-it8500: rephrase config get/set/list, reflect...
|
commit | commitdiff | tree |
| 2020-10-06 |
Timo Kokkonen | itech-it8500: ITECH IT8500 series DC electronic load...
|
commit | commitdiff | tree |
| 2020-10-06 |
Timo Kokkonen | itech-it8500: Initial driver skeleton.
|
commit | commitdiff | tree |
| 2020-10-06 |
Timo Kokkonen | hwdriver: New entries for DC Load "CW" (Power) and...
|
commit | commitdiff | tree |
| 2020-10-06 |
Gerhard Sittig | dmm/metex14: unbreak packet request helper return code
|
commit | commitdiff | tree |
| 2020-10-06 |
Gerhard Sittig | README.devices: add JTAGulator section for Logic Analyzer...
|
commit | commitdiff | tree |
| 2020-10-04 |
Gerhard Sittig | input/csv: trim cell content before conversion
|
commit | commitdiff | tree |
| 2020-10-04 |
Timo Kokkonen | rigol-dg: Fix reading current output signal duty cycle...
|
commit | commitdiff | tree |
| 2020-10-04 |
Timo Kokkonen | rigol-dg: Add Rigol DG800 and DG900 series support.
|
commit | commitdiff | tree |
| 2020-10-04 |
Timo Kokkonen | udev: Add Rigol DG800 and DG900 series VID/PID.
|
commit | commitdiff | tree |
| 2020-10-03 |
Gerhard Sittig | pce-322a: unbreak send_command() return code
|
commit | commitdiff | tree |
| 2020-09-28 |
Gerhard Sittig | rigol-dg: reduce redundancy in malloc() calls
|
commit | commitdiff | tree |
| 2020-09-28 |
Timo Kokkonen | udev: Add Rigol DG1000z Series VID/PID.
|
commit | commitdiff | tree |
| 2020-09-28 |
Timo Kokkonen | rigol-dg: Initial Rigol DG1000z driver implementation.
|
commit | commitdiff | tree |
| 2020-09-28 |
Timo Kokkonen | rigol-dg: Initial driver skeleton.
|
commit | commitdiff | tree |
| 2020-09-28 |
Timo Kokkonen | hwdriver: Add SR_CONF_DUTY_CYCLE & SR_CONF_PHASE.
|
commit | commitdiff | tree |
| 2020-09-27 |
Ralf | scpi: accept numbers like 4.0000E3 as integer value
|
commit | commitdiff | tree |
| 2020-09-27 |
Gerhard Sittig | serial: lower severity of failed stream detect message
|
commit | commitdiff | tree |
| 2020-09-27 |
Gerhard Sittig | ols: more robust device reset in acquisition stop
|
commit | commitdiff | tree |
| 2020-09-21 |
Gerhard Sittig | brymen-dmm: unbreak dBm reference impedance interpretation
|
commit | commitdiff | tree |
| 2020-09-21 |
Gerhard Sittig | brymen-dmm: unbreak temperature response parsing
|
commit | commitdiff | tree |
| 2020-09-21 |
Gerhard Sittig | brymen-dmm: rephrase bfunc and value text parsing
|
commit | commitdiff | tree |
| 2020-09-21 |
Gerhard Sittig | brymen-dmm: improve text to number conversion robustness...
|
commit | commitdiff | tree |
| 2020-09-20 |
Gerhard Sittig | brymen-dmm: style nits, apply comm param defaults,...
|
commit | commitdiff | tree |
| 2020-09-20 |
Gerhard Sittig | brymen-dmm: unbreak BM85x communication by pulsing...
|
commit | commitdiff | tree |
| 2020-09-20 |
Gerhard Sittig | serial: add routine to manipulate handshake state ...
|
commit | commitdiff | tree |
| 2020-09-20 |
Gerhard Sittig | serial: rephrase check for speed (bitrate) in parameter...
|
commit | commitdiff | tree |
| 2020-09-19 |
Gerhard Sittig | dmm/bm52x: introduce support for Brymen BM525s
|
commit | commitdiff | tree |
| 2020-09-19 |
Gerhard Sittig | serial-dmm: only do bytes to text conversion at higher...
|
commit | commitdiff | tree |
| 2020-09-18 |
Gerhard Sittig | input/csv: provide double precision values to session...
|
commit | commitdiff | tree |
| 2020-09-18 |
Gerhard Sittig | analog.c: rephrase analog feed to float conversion...
|
commit | commitdiff | tree |
| 2020-09-18 |
Gerhard Sittig | libsigrok-internal.h: add more endianess aware stream...
|
commit | commitdiff | tree |
| 2020-09-18 |
Gerhard Sittig | tests/analog: add more tests for analog feed to float...
|
commit | commitdiff | tree |
| 2020-09-18 |
Timo Kokkonen | analog.c: sr_analog_to_float(): Support for receiving...
|
commit | commitdiff | tree |
| 2020-09-02 |
Gerhard Sittig | input/saleae: improve L2D undersampling, do provide...
|
commit | commitdiff | tree |
| 2020-09-01 |
Gerhard Sittig | korad-kaxxxxp: remove obsolete code (clear before read...
|
commit | commitdiff | tree |
| 2020-09-01 |
Gerhard Sittig | korad-kaxxxxp: speed up scan process, rephrase response...
|
commit | commitdiff | tree |
| 2020-08-28 |
Gerhard Sittig | korad-kaxxxxp: style cleanup in device scan, keep serno...
|
commit | commitdiff | tree |
| 2020-08-26 |
Gerhard Sittig | input/saleae: keep previous channels across cleanup...
|
commit | commitdiff | tree |
| 2020-08-25 |
Gerhard Sittig | scpi-pps: use remote and local modes for HMP4000
|
commit | commitdiff | tree |
| 2020-08-25 |
Gerhard Sittig | scpi-pps: Add more HMP4000 series devices
|
commit | commitdiff | tree |
| 2020-08-25 |
Florian Schmidt | scpi-pps: add support for Hameg / Rohde & Schwarz HMP4040
|
commit | commitdiff | tree |
| 2020-08-25 |
Gerhard Sittig | doc: update README.devices for GWInstek VCP (CP210x...
|
commit | commitdiff | tree |
| 2020-08-25 |
Gerhard Sittig | scpi_serial: add "GWInstek VCP" (PID 0x0030) as seen...
|
commit | commitdiff | tree |
| 2020-08-25 |
Gerhard Sittig | scpi-dmm: factor out some OL detection limits
|
commit | commitdiff | tree |
| 2020-08-25 |
Gerhard Sittig | scpi-dmm: add SR_CONF_CONN getter
|
commit | commitdiff | tree |
| 2020-08-24 |
v1ne | ols: Detect Demon Core, use its canonic command names
|
commit | commitdiff | tree |
| 2020-08-24 |
v1ne | ols: Refactor, deduplicate logic packet code
|
commit | commitdiff | tree |
| 2020-08-24 |
v1ne | ols: Use symbolic name for "success" error code.
|
commit | commitdiff | tree |
| 2020-08-24 |
v1ne | ols: Make constant names more precise, clarify comment
|
commit | commitdiff | tree |
| 2020-08-24 |
v1ne | ols: Rename "flags" to "capture flags".
|
commit | commitdiff | tree |
| 2020-08-24 |
v1ne | ols: Symbolic name for magic value, reflect units in...
|
commit | commitdiff | tree |
| 2020-08-24 |
v1ne | ols: Remove stray command
|
commit | commitdiff | tree |
| 2020-08-24 |
v1ne | ols: Make use of zero-initialization.
|
commit | commitdiff | tree |
| 2020-08-22 |
Frank Stettner | libsigrok.h: Add Joule, Coulomb, and Ah units.
|
commit | commitdiff | tree |
| 2020-08-22 |
Frank Stettner | libsigrok.h: Add MQ for electric charge.
|
commit | commitdiff | tree |
| 2020-08-22 |
Frank Stettner | teleinfo: Fix measured quantity (energy, not power).
|
commit | commitdiff | tree |
| 2020-08-22 |
Gerhard Sittig | output/csv: always generate text for analog/logic data...
|
commit | commitdiff | tree |
| 2020-08-22 |
Gerhard Sittig | output/csv: check unsupported/untested input signal...
|
commit | commitdiff | tree |
| 2020-08-22 |
Timo Kokkonen | README.devices: Document enabling GW Instek GDM-397...
|
commit | commitdiff | tree |
| next |
projects / libsigrok.git / search