| 2021-06-01 |
Gerhard Sittig | scpi-dmm: add short measurement delay for 34465A
|
commit | commitdiff | tree |
| 2021-06-01 |
Gerhard Sittig | scpi-dmm: model and MQ dependent delay before measurement
|
commit | commitdiff | tree |
| 2021-06-01 |
Gerhard Sittig | scpi-dmm: model and MQ dependent delay when switching...
|
commit | commitdiff | tree |
| 2021-06-01 |
Gerhard Sittig | scpi-dmm: use different Agilent SCPI command for range...
|
commit | commitdiff | tree |
| 2021-06-01 |
Gerhard Sittig | scpi-dmm: rephrase read timeout decls, put "unit" after...
|
commit | commitdiff | tree |
| 2021-06-01 |
Gerhard Sittig | fluke-45: drop serial port echo test, was disabled...
|
commit | commitdiff | tree |
| 2021-06-01 |
Gerhard Sittig | hp-3457a: only probe when conn= was specified, to not...
|
commit | commitdiff | tree |
| 2021-06-01 |
Gerhard Sittig | scpi-pps: don't break SCPI devices when scanning for...
|
commit | commitdiff | tree |
| 2021-06-01 |
Gerhard Sittig | scpi: style nits in sr_scpi_scan(), prefer common helper
|
commit | commitdiff | tree |
| 2021-06-01 |
Gerhard Sittig | siglent-sds: move model dependent request emission...
|
commit | commitdiff | tree |
| 2021-06-01 |
Gerhard Sittig | hp-59306a: only match when conn= is given to avoid...
|
commit | commitdiff | tree |
| 2021-06-01 |
Gerhard Sittig | motech-lps-301: make better use of serial extract options...
|
commit | commitdiff | tree |
| 2021-06-01 |
Gerhard Sittig | serial: extend semantics of connection and comm params...
|
commit | commitdiff | tree |
| 2021-05-22 |
Gerhard Sittig | scpi-dmm: avoid get/set range calls for some of the...
|
commit | commitdiff | tree |
| 2021-05-22 |
Gerhard Sittig | scpi-dmm: add four-wire resistance to list of 34405A MQs
|
commit | commitdiff | tree |
| 2021-05-22 |
Gerhard Sittig | scpi-dmm: prepare introduction of per-MQ driver flags
|
commit | commitdiff | tree |
| 2021-05-22 |
Gerhard Sittig | scpi-dmm: add support to get/set range on Agilent protocol...
|
commit | commitdiff | tree |
| 2021-05-22 |
Gerhard Sittig | scpi-dmm: use INIT instead of MEAS for Agilent to start...
|
commit | commitdiff | tree |
| 2021-05-22 |
Gerhard Sittig | scpi-dmm: Keysight 34465A is a 6.5 digit meter, bump...
|
commit | commitdiff | tree |
| 2021-05-22 |
Gerhard Sittig | scpi-dmm: move OPC availability check to after IDN...
|
commit | commitdiff | tree |
| 2021-05-22 |
Gerhard Sittig | contrib: add udev rule for Keysight USBTMC
|
commit | commitdiff | tree |
| 2021-05-22 |
Gerhard Sittig | siglent-sds: prefer common glib routine to get vector...
|
commit | commitdiff | tree |
| 2021-05-22 |
Gerhard Sittig | scpi: readability nits in vector getters, style nit...
|
commit | commitdiff | tree |
| 2021-05-22 |
Gerhard Sittig | siglent-sds: free memory that was allocated by SCPI...
|
commit | commitdiff | tree |
| 2021-05-22 |
Gerhard Sittig | hameg-hmo: free memory that was allocated by SCPI get...
|
commit | commitdiff | tree |
| 2021-05-22 |
Gerhard Sittig | rigol-ds: free memory that was allocated by SCPI get...
|
commit | commitdiff | tree |
| 2021-05-22 |
Gerhard Sittig | scpi-dmm: free memory that was allocated by SCPI get...
|
commit | commitdiff | tree |
| 2021-05-22 |
Gerhard Sittig | rigol-dg: free memory that was allocated by SCPI get...
|
commit | commitdiff | tree |
| 2021-05-22 |
Gerhard Sittig | lecroy-xstream: free memory that was allocated by SCPI...
|
commit | commitdiff | tree |
| 2021-05-22 |
Gerhard Sittig | hp-3457a: style nits in the probe routine
|
commit | commitdiff | tree |
| 2021-05-22 |
Gerhard Sittig | hp-3457a: free memory that was allocated by SCPI get...
|
commit | commitdiff | tree |
| 2021-05-22 |
Gerhard Sittig | fluke-45: free memory that was allocated by SCPI get...
|
commit | commitdiff | tree |
| 2021-05-22 |
Gerhard Sittig | scpi: document callers' responsibility to free getters...
|
commit | commitdiff | tree |
| 2021-05-22 |
Gerhard Sittig | scpi: make sure to either return valid SCPI response...
|
commit | commitdiff | tree |
| 2021-05-22 |
Gerhard Sittig | serial_libsp: extend diag in code path which opens...
|
commit | commitdiff | tree |
| 2021-04-25 |
Gerhard Sittig | contrib/60-libsigrok.rules: add udev rule for Microchip...
|
commit | commitdiff | tree |
| 2021-04-25 |
Gerhard Sittig | input/csv: trim surrounding whitespace from header...
|
commit | commitdiff | tree |
| 2021-04-25 |
Gerhard Sittig | rdtech-dps: research to reduce serial comm transfer...
|
commit | commitdiff | tree |
| 2021-04-25 |
Gerhard Sittig | rdtech-dps: introduce support for RD6006 and other...
|
commit | commitdiff | tree |
| 2021-04-25 |
Gerhard Sittig | rdtech-dps: layer separation between API and protocol...
|
commit | commitdiff | tree |
| 2021-03-16 |
Gerhard Sittig | kingst-la2016: address trivial style nits (whitespace...
|
commit | commitdiff | tree |
| 2021-03-16 |
Gerhard Sittig | tests: extend endianess conversion tests to also cover...
|
commit | commitdiff | tree |
| 2021-03-16 |
Gerhard Sittig | libsigrok-internal.h: add 48bit endianess aware byte...
|
commit | commitdiff | tree |
| 2021-02-02 |
Gerhard Sittig | scpi-pps: add R&S HMP2000 model specs
|
commit | commitdiff | tree |
| 2021-02-02 |
Gerhard Sittig | scpi-pps: adjust R&S HMP4000 current resolution for...
|
commit | commitdiff | tree |
| 2021-01-05 |
Gerhard Sittig | doc: update README.devices for Meterman 38XR (RS232...
|
commit | commitdiff | tree |
| 2021-01-05 |
Gerhard Sittig | serial-dmm: move Mastek items after Metex in the model...
|
commit | commitdiff | tree |
| 2020-12-29 |
Gerhard Sittig | dmm/bm52x: unbreak build when serial comm is not available
|
commit | commitdiff | tree |
| 2020-12-25 |
Gerhard Sittig | ftdi-la: work around missing USB strings during device...
|
commit | commitdiff | tree |
| 2020-11-05 |
Gerhard Sittig | driver_list: unbreak list of builtin drivers for LTO...
|
commit | commitdiff | tree |
| 2020-10-26 |
Gerhard Sittig | libsigrok-internal.h: add u64be endianess writer
|
commit | commitdiff | tree |
| 2020-10-22 |
Gerhard Sittig | serial-dmm: add support for the Brymen BM820s family
|
commit | commitdiff | tree |
| 2020-10-22 |
Gerhard Sittig | dmm/bm52x: add support for recorded measurements (memory...
|
commit | commitdiff | tree |
| 2020-10-22 |
Gerhard Sittig | brymen-dmm: remove obsolete driver (support has moved...
|
commit | commitdiff | tree |
| 2020-10-22 |
Gerhard Sittig | dmm/bm85x: introduce DMM packet parser for Brymen BM850...
|
commit | commitdiff | tree |
| 2020-10-22 |
Gerhard Sittig | strutil: add text to float conversion which also gets...
|
commit | commitdiff | tree |
| 2020-10-22 |
Gerhard Sittig | serial-dmm: more DMM parser callbacks (open, var length...
|
commit | commitdiff | tree |
| 2020-10-22 |
Gerhard Sittig | serial: extend stream detect for variable length packet...
|
commit | commitdiff | tree |
| 2020-10-22 |
Gerhard Sittig | input/vcd: fix a divide by zero bug in the analog-only...
|
commit | commitdiff | tree |
| 2020-10-18 |
Gerhard Sittig | input/vcd: suggest downsampling to users for reduced...
|
commit | commitdiff | tree |
| 2020-10-18 |
Gerhard Sittig | input/vcd: unbreak U and - values for single bit input...
|
commit | commitdiff | tree |
| 2020-10-06 |
Gerhard Sittig | itech-it8500: avoid "new" as a variable identifier
|
commit | commitdiff | tree |
| 2020-10-06 |
Gerhard Sittig | itech-it8500: declaration nits
|
commit | commitdiff | tree |
| 2020-10-06 |
Gerhard Sittig | itech-it8500: rephrase config get/set/list, reflect...
|
commit | commitdiff | tree |
| 2020-10-06 |
Gerhard Sittig | dmm/metex14: unbreak packet request helper return code
|
commit | commitdiff | tree |
| 2020-10-06 |
Gerhard Sittig | README.devices: add JTAGulator section for Logic Analyzer...
|
commit | commitdiff | tree |
| 2020-10-04 |
Gerhard Sittig | input/csv: trim cell content before conversion
|
commit | commitdiff | tree |
| 2020-10-03 |
Gerhard Sittig | pce-322a: unbreak send_command() return code
|
commit | commitdiff | tree |
| 2020-09-28 |
Gerhard Sittig | rigol-dg: reduce redundancy in malloc() calls
|
commit | commitdiff | tree |
| 2020-09-27 |
Gerhard Sittig | serial: lower severity of failed stream detect message
|
commit | commitdiff | tree |
| 2020-09-27 |
Gerhard Sittig | ols: more robust device reset in acquisition stop
|
commit | commitdiff | tree |
| 2020-09-21 |
Gerhard Sittig | brymen-dmm: unbreak dBm reference impedance interpretation
|
commit | commitdiff | tree |
| 2020-09-21 |
Gerhard Sittig | brymen-dmm: unbreak temperature response parsing
|
commit | commitdiff | tree |
| 2020-09-21 |
Gerhard Sittig | brymen-dmm: rephrase bfunc and value text parsing
|
commit | commitdiff | tree |
| 2020-09-21 |
Gerhard Sittig | brymen-dmm: improve text to number conversion robustness...
|
commit | commitdiff | tree |
| 2020-09-20 |
Gerhard Sittig | brymen-dmm: style nits, apply comm param defaults,...
|
commit | commitdiff | tree |
| 2020-09-20 |
Gerhard Sittig | brymen-dmm: unbreak BM85x communication by pulsing...
|
commit | commitdiff | tree |
| 2020-09-20 |
Gerhard Sittig | serial: add routine to manipulate handshake state ...
|
commit | commitdiff | tree |
| 2020-09-20 |
Gerhard Sittig | serial: rephrase check for speed (bitrate) in parameter...
|
commit | commitdiff | tree |
| 2020-09-19 |
Gerhard Sittig | dmm/bm52x: introduce support for Brymen BM525s
|
commit | commitdiff | tree |
| 2020-09-19 |
Gerhard Sittig | serial-dmm: only do bytes to text conversion at higher...
|
commit | commitdiff | tree |
| 2020-09-18 |
Gerhard Sittig | input/csv: provide double precision values to session...
|
commit | commitdiff | tree |
| 2020-09-18 |
Gerhard Sittig | analog.c: rephrase analog feed to float conversion...
|
commit | commitdiff | tree |
| 2020-09-18 |
Gerhard Sittig | libsigrok-internal.h: add more endianess aware stream...
|
commit | commitdiff | tree |
| 2020-09-18 |
Gerhard Sittig | tests/analog: add more tests for analog feed to float...
|
commit | commitdiff | tree |
| 2020-09-02 |
Gerhard Sittig | input/saleae: improve L2D undersampling, do provide...
|
commit | commitdiff | tree |
| 2020-09-01 |
Gerhard Sittig | korad-kaxxxxp: remove obsolete code (clear before read...
|
commit | commitdiff | tree |
| 2020-09-01 |
Gerhard Sittig | korad-kaxxxxp: speed up scan process, rephrase response...
|
commit | commitdiff | tree |
| 2020-08-28 |
Gerhard Sittig | korad-kaxxxxp: style cleanup in device scan, keep serno...
|
commit | commitdiff | tree |
| 2020-08-26 |
Gerhard Sittig | input/saleae: keep previous channels across cleanup...
|
commit | commitdiff | tree |
| 2020-08-25 |
Gerhard Sittig | scpi-pps: use remote and local modes for HMP4000
|
commit | commitdiff | tree |
| 2020-08-25 |
Gerhard Sittig | scpi-pps: Add more HMP4000 series devices
|
commit | commitdiff | tree |
| 2020-08-25 |
Gerhard Sittig | doc: update README.devices for GWInstek VCP (CP210x...
|
commit | commitdiff | tree |
| 2020-08-25 |
Gerhard Sittig | scpi_serial: add "GWInstek VCP" (PID 0x0030) as seen...
|
commit | commitdiff | tree |
| 2020-08-25 |
Gerhard Sittig | scpi-dmm: factor out some OL detection limits
|
commit | commitdiff | tree |
| 2020-08-25 |
Gerhard Sittig | scpi-dmm: add SR_CONF_CONN getter
|
commit | commitdiff | tree |
| 2020-08-22 |
Gerhard Sittig | output/csv: always generate text for analog/logic data...
|
commit | commitdiff | tree |
| 2020-08-22 |
Gerhard Sittig | output/csv: check unsupported/untested input signal...
|
commit | commitdiff | tree |
| 2020-08-22 |
Gerhard Sittig | korad-kaxxxxp: add support for forced "detection" of...
|
commit | commitdiff | tree |
| 2020-08-22 |
Gerhard Sittig | hwdriver: introduce SR_CONF_FORCE_DETECT config key...
|
commit | commitdiff | tree |
| next |
projects / libsigrok.git / search