sigrok.org Git - libsigrok.git/search

]> sigrok.org Git - libsigrok.git/search

2021-06-01	Gerhard Sittig	scpi-dmm: model and MQ dependent delay when switching...	commit \| commitdiff \| tree
2021-06-01	Gerhard Sittig	scpi-dmm: use different Agilent SCPI command for range...	commit \| commitdiff \| tree
2021-06-01	Gerhard Sittig	scpi-dmm: rephrase read timeout decls, put "unit" after...	commit \| commitdiff \| tree
2021-06-01	Gerhard Sittig	fluke-45: drop serial port echo test, was disabled...	commit \| commitdiff \| tree
2021-06-01	Gerhard Sittig	hp-3457a: only probe when conn= was specified, to not...	commit \| commitdiff \| tree
2021-06-01	Gerhard Sittig	scpi-pps: don't break SCPI devices when scanning for...	commit \| commitdiff \| tree
2021-06-01	Gerhard Sittig	scpi: style nits in sr_scpi_scan(), prefer common helper	commit \| commitdiff \| tree
2021-06-01	Gerhard Sittig	siglent-sds: move model dependent request emission...	commit \| commitdiff \| tree
2021-06-01	Gerhard Sittig	hp-59306a: only match when conn= is given to avoid...	commit \| commitdiff \| tree
2021-06-01	Gerhard Sittig	motech-lps-301: make better use of serial extract options...	commit \| commitdiff \| tree
2021-06-01	Gerhard Sittig	serial: extend semantics of connection and comm params...	commit \| commitdiff \| tree
2021-05-22	Gerhard Sittig	scpi-dmm: avoid get/set range calls for some of the...	commit \| commitdiff \| tree
2021-05-22	Gerhard Sittig	scpi-dmm: add four-wire resistance to list of 34405A MQs	commit \| commitdiff \| tree
2021-05-22	Gerhard Sittig	scpi-dmm: prepare introduction of per-MQ driver flags	commit \| commitdiff \| tree
2021-05-22	Gerhard Sittig	scpi-dmm: add support to get/set range on Agilent protocol...	commit \| commitdiff \| tree
2021-05-22	Gerhard Sittig	scpi-dmm: use INIT instead of MEAS for Agilent to start...	commit \| commitdiff \| tree
2021-05-22	Gerhard Sittig	scpi-dmm: Keysight 34465A is a 6.5 digit meter, bump...	commit \| commitdiff \| tree
2021-05-22	Gerhard Sittig	scpi-dmm: move OPC availability check to after IDN...	commit \| commitdiff \| tree
2021-05-22	Gerhard Sittig	contrib: add udev rule for Keysight USBTMC	commit \| commitdiff \| tree
2021-05-22	Gerhard Sittig	siglent-sds: prefer common glib routine to get vector...	commit \| commitdiff \| tree
2021-05-22	Gerhard Sittig	scpi: readability nits in vector getters, style nit...	commit \| commitdiff \| tree
2021-05-22	Gerhard Sittig	siglent-sds: free memory that was allocated by SCPI...	commit \| commitdiff \| tree
2021-05-22	Gerhard Sittig	hameg-hmo: free memory that was allocated by SCPI get...	commit \| commitdiff \| tree
2021-05-22	Gerhard Sittig	rigol-ds: free memory that was allocated by SCPI get...	commit \| commitdiff \| tree
2021-05-22	Gerhard Sittig	scpi-dmm: free memory that was allocated by SCPI get...	commit \| commitdiff \| tree
2021-05-22	Gerhard Sittig	rigol-dg: free memory that was allocated by SCPI get...	commit \| commitdiff \| tree
2021-05-22	Gerhard Sittig	lecroy-xstream: free memory that was allocated by SCPI...	commit \| commitdiff \| tree
2021-05-22	Gerhard Sittig	hp-3457a: style nits in the probe routine	commit \| commitdiff \| tree
2021-05-22	Gerhard Sittig	hp-3457a: free memory that was allocated by SCPI get...	commit \| commitdiff \| tree
2021-05-22	Gerhard Sittig	fluke-45: free memory that was allocated by SCPI get...	commit \| commitdiff \| tree
2021-05-22	Gerhard Sittig	scpi: document callers' responsibility to free getters...	commit \| commitdiff \| tree
2021-05-22	Gerhard Sittig	scpi: make sure to either return valid SCPI response...	commit \| commitdiff \| tree
2021-05-22	Gerhard Sittig	serial_libsp: extend diag in code path which opens...	commit \| commitdiff \| tree
2021-05-16	Rafael G. Martins	serial-dmm: Add PeakTech 2025 meter support.	commit \| commitdiff \| tree
2021-05-09	Frank Stettner	rdtech-dps: Add missing devc initialisation.	commit \| commitdiff \| tree
2021-04-25	Gerhard Sittig	contrib/60-libsigrok.rules: add udev rule for Microchip...	commit \| commitdiff \| tree
2021-04-25	Gerhard Sittig	input/csv: trim surrounding whitespace from header...	commit \| commitdiff \| tree
2021-04-25	Gerhard Sittig	rdtech-dps: research to reduce serial comm transfer...	commit \| commitdiff \| tree
2021-04-25	Gerhard Sittig	rdtech-dps: introduce support for RD6006 and other...	commit \| commitdiff \| tree
2021-04-25	Gerhard Sittig	rdtech-dps: layer separation between API and protocol...	commit \| commitdiff \| tree
2021-04-25	Frank Stettner	hp-59306a: Initial HP 59306A driver.	commit \| commitdiff \| tree
2021-03-16	Gerhard Sittig	kingst-la2016: address trivial style nits (whitespace...	commit \| commitdiff \| tree
2021-03-16	Helge Kruse	kingst-la2016: Eliminate non-portable packed structs...	commit \| commitdiff \| tree
2021-03-16	Helge Kruse	kingst-la2016: Use common code to send trigger and...	commit \| commitdiff \| tree
2021-03-16	Gerhard Sittig	tests: extend endianess conversion tests to also cover...	commit \| commitdiff \| tree
2021-03-16	Gerhard Sittig	libsigrok-internal.h: add 48bit endianess aware byte...	commit \| commitdiff \| tree
2021-03-16	Helge Kruse	kingst-la2016: Upload firmware to correct USB configuration 1	commit \| commitdiff \| tree
2021-03-16	Frank Stettner	korad-kaxxxxp: Add support for Korad KD3005P V2.1	commit \| commitdiff \| tree
2021-03-06	Petteri Aimonen	scpi-dmm: Add support for Owon XDM2041	commit \| commitdiff \| tree
2021-03-06	Petteri Aimonen	scpi-dmm: Gracefully handle meters that lack OPC command.	commit \| commitdiff \| tree
2021-03-06	Petteri Aimonen	scpi-dmm: Add infinity limit to model-specific config.	commit \| commitdiff \| tree
2021-02-02	Gerhard Sittig	scpi-pps: add R&S HMP2000 model specs	commit \| commitdiff \| tree
2021-02-02	Gerhard Sittig	scpi-pps: adjust R&S HMP4000 current resolution for...	commit \| commitdiff \| tree
2021-01-06	v1ne	ols: Clean up: Replace hand-rolled byte order conversion...	commit \| commitdiff \| tree
2021-01-06	v1ne	ols: Refactor: Extract trigger setup into private place	commit \| commitdiff \| tree
2021-01-06	v1ne	ols: Make external clock setting queriable	commit \| commitdiff \| tree
2021-01-06	v1ne	ols: Add option to use the falling edge of the external...	commit \| commitdiff \| tree
2021-01-06	v1ne	ols: Clear "disabled groups" flags before setting them	commit \| commitdiff \| tree
2021-01-06	v1ne	ols: Display actual expanded sample instead of the...	commit \| commitdiff \| tree
2021-01-06	v1ne	ols: Clean up: Prefix private function for consistency	commit \| commitdiff \| tree
2021-01-05	Gerhard Sittig	doc: update README.devices for Meterman 38XR (RS232...	commit \| commitdiff \| tree
2021-01-05	Peter Skarpetis	dmm/mm38xr: introduce DMM packet parser for Meterman...	commit \| commitdiff \| tree
2021-01-05	Gerhard Sittig	serial-dmm: move Mastek items after Metex in the model...	commit \| commitdiff \| tree
2021-01-04	Frank Stettner	arachnid-labs-re-load-pro: Fix for get voltage and...	commit \| commitdiff \| tree
2020-12-29	Gerhard Sittig	dmm/bm52x: unbreak build when serial comm is not available	commit \| commitdiff \| tree
2020-12-25	Ralf	fx2lafw: Unbreak SR_CONF_LIMIT_SAMPLES for large values...	commit \| commitdiff \| tree
2020-12-25	Gerhard Sittig	ftdi-la: work around missing USB strings during device...	commit \| commitdiff \| tree
2020-11-28	Niklas Thorne	asix-sigma: parse serial numbers as unsigned values	commit \| commitdiff \| tree
2020-11-17	Niklas Thorne	strutil: introduce sr_atoul_base() conversion helper...	commit \| commitdiff \| tree
2020-11-05	Gerhard Sittig	driver_list: unbreak list of builtin drivers for LTO...	commit \| commitdiff \| tree
2020-10-26	Gerhard Sittig	libsigrok-internal.h: add u64be endianess writer	commit \| commitdiff \| tree
2020-10-22	Gerhard Sittig	serial-dmm: add support for the Brymen BM820s family	commit \| commitdiff \| tree
2020-10-22	Gerhard Sittig	dmm/bm52x: add support for recorded measurements (memory...	commit \| commitdiff \| tree
2020-10-22	Gerhard Sittig	brymen-dmm: remove obsolete driver (support has moved...	commit \| commitdiff \| tree
2020-10-22	Gerhard Sittig	dmm/bm85x: introduce DMM packet parser for Brymen BM850...	commit \| commitdiff \| tree
2020-10-22	Gerhard Sittig	strutil: add text to float conversion which also gets...	commit \| commitdiff \| tree
2020-10-22	Gerhard Sittig	serial-dmm: more DMM parser callbacks (open, var length...	commit \| commitdiff \| tree
2020-10-22	Gerhard Sittig	serial: extend stream detect for variable length packet...	commit \| commitdiff \| tree
2020-10-22	Gerhard Sittig	input/vcd: fix a divide by zero bug in the analog-only...	commit \| commitdiff \| tree
2020-10-18	Gerhard Sittig	input/vcd: suggest downsampling to users for reduced...	commit \| commitdiff \| tree
2020-10-18	Gerhard Sittig	input/vcd: unbreak U and - values for single bit input...	commit \| commitdiff \| tree
2020-10-09	Soeren Apel	configure: Add optional TI-RPC dependency, unbreak...	commit \| commitdiff \| tree
2020-10-06	Timo Kokkonen	rigol-dg: Add device/firmware specific quirks support.	commit \| commitdiff \| tree
2020-10-06	Gerhard Sittig	itech-it8500: avoid "new" as a variable identifier	commit \| commitdiff \| tree
2020-10-06	Gerhard Sittig	itech-it8500: declaration nits	commit \| commitdiff \| tree
2020-10-06	Gerhard Sittig	itech-it8500: rephrase config get/set/list, reflect...	commit \| commitdiff \| tree
2020-10-06	Timo Kokkonen	itech-it8500: ITECH IT8500 series DC electronic load...	commit \| commitdiff \| tree
2020-10-06	Timo Kokkonen	itech-it8500: Initial driver skeleton.	commit \| commitdiff \| tree
2020-10-06	Timo Kokkonen	hwdriver: New entries for DC Load "CW" (Power) and...	commit \| commitdiff \| tree
2020-10-06	Gerhard Sittig	dmm/metex14: unbreak packet request helper return code	commit \| commitdiff \| tree
2020-10-06	Gerhard Sittig	README.devices: add JTAGulator section for Logic Analyzer...	commit \| commitdiff \| tree
2020-10-04	Gerhard Sittig	input/csv: trim cell content before conversion	commit \| commitdiff \| tree
2020-10-04	Timo Kokkonen	rigol-dg: Fix reading current output signal duty cycle...	commit \| commitdiff \| tree
2020-10-04	Timo Kokkonen	rigol-dg: Add Rigol DG800 and DG900 series support.	commit \| commitdiff \| tree
2020-10-04	Timo Kokkonen	udev: Add Rigol DG800 and DG900 series VID/PID.	commit \| commitdiff \| tree
2020-10-03	Gerhard Sittig	pce-322a: unbreak send_command() return code	commit \| commitdiff \| tree
2020-09-28	Gerhard Sittig	rigol-dg: reduce redundancy in malloc() calls	commit \| commitdiff \| tree
2020-09-28	Timo Kokkonen	udev: Add Rigol DG1000z Series VID/PID.	commit \| commitdiff \| tree
2020-09-28	Timo Kokkonen	rigol-dg: Initial Rigol DG1000z driver implementation.	commit \| commitdiff \| tree
2020-09-28	Timo Kokkonen	rigol-dg: Initial driver skeleton.	commit \| commitdiff \| tree
next

Hardware access and backend lib

RSS Atom