]> sigrok.org Git - libsigrok.git/history - src
itech-it8500: declaration nits
[libsigrok.git] / src /
2020-10-06 Gerhard Sittigitech-it8500: declaration nits
2020-10-06 Gerhard Sittigitech-it8500: rephrase config get/set/list, reflect...
2020-10-06 Timo Kokkonenitech-it8500: ITECH IT8500 series DC electronic load...
2020-10-06 Timo Kokkonenitech-it8500: Initial driver skeleton.
2020-10-06 Timo Kokkonenhwdriver: New entries for DC Load "CW" (Power) and...
2020-10-06 Gerhard Sittigdmm/metex14: unbreak packet request helper return code
2020-10-04 Gerhard Sittiginput/csv: trim cell content before conversion
2020-10-04 Timo Kokkonenrigol-dg: Fix reading current output signal duty cycle...
2020-10-04 Timo Kokkonenrigol-dg: Add Rigol DG800 and DG900 series support.
2020-10-03 Gerhard Sittigpce-322a: unbreak send_command() return code
2020-09-28 Gerhard Sittigrigol-dg: reduce redundancy in malloc() calls
2020-09-28 Timo Kokkonenrigol-dg: Initial Rigol DG1000z driver implementation.
2020-09-28 Timo Kokkonenrigol-dg: Initial driver skeleton.
2020-09-28 Timo Kokkonenhwdriver: Add SR_CONF_DUTY_CYCLE & SR_CONF_PHASE.
2020-09-27 Ralfscpi: accept numbers like 4.0000E3 as integer value
2020-09-27 Gerhard Sittigserial: lower severity of failed stream detect message
2020-09-27 Gerhard Sittigols: more robust device reset in acquisition stop
2020-09-24 Ben Gardinerols: send CMD_RESET on acquisition stop
2020-09-21 Gerhard Sittigbrymen-dmm: unbreak dBm reference impedance interpretation
2020-09-21 Gerhard Sittigbrymen-dmm: unbreak temperature response parsing
2020-09-21 Gerhard Sittigbrymen-dmm: rephrase bfunc and value text parsing
2020-09-21 Gerhard Sittigbrymen-dmm: improve text to number conversion robustnes...
2020-09-20 Gerhard Sittigbrymen-dmm: style nits, apply comm param defaults,...
2020-09-20 Gerhard Sittigbrymen-dmm: unbreak BM85x communication by pulsing...
2020-09-20 Gerhard Sittigserial: add routine to manipulate handshake state ...
2020-09-20 Gerhard Sittigserial: rephrase check for speed (bitrate) in parameter...
2020-09-19 Gerhard Sittigdmm/bm52x: introduce support for Brymen BM525s
2020-09-19 Gerhard Sittigserial-dmm: only do bytes to text conversion at higher...
2020-09-18 Gerhard Sittiginput/csv: provide double precision values to session...
2020-09-18 Gerhard Sittiganalog.c: rephrase analog feed to float conversion...
2020-09-18 Gerhard Sittiglibsigrok-internal.h: add more endianess aware stream...
2020-09-18 Timo Kokkonenanalog.c: sr_analog_to_float(): Support for receiving...
2020-09-02 Gerhard Sittiginput/saleae: improve L2D undersampling, do provide...
2020-09-01 Gerhard Sittigkorad-kaxxxxp: remove obsolete code (clear before read...
2020-09-01 Gerhard Sittigkorad-kaxxxxp: speed up scan process, rephrase response...
2020-08-28 Gerhard Sittigkorad-kaxxxxp: style cleanup in device scan, keep serno...
2020-08-26 Gerhard Sittiginput/saleae: keep previous channels across cleanup...
2020-08-25 Gerhard Sittigscpi-pps: use remote and local modes for HMP4000
2020-08-25 Gerhard Sittigscpi-pps: Add more HMP4000 series devices
2020-08-25 Florian Schmidtscpi-pps: add support for Hameg / Rohde & Schwarz HMP4040
2020-08-25 Gerhard Sittigscpi_serial: add "GWInstek VCP" (PID 0x0030) as seen...
2020-08-25 Gerhard Sittigscpi-dmm: factor out some OL detection limits
2020-08-25 Gerhard Sittigscpi-dmm: add SR_CONF_CONN getter
2020-08-24 v1neols: Detect Demon Core, use its canonic command names
2020-08-24 v1neols: Refactor, deduplicate logic packet code
2020-08-24 v1neols: Use symbolic name for "success" error code.
2020-08-24 v1neols: Make constant names more precise, clarify comment
2020-08-24 v1neols: Rename "flags" to "capture flags".
2020-08-24 v1neols: Symbolic name for magic value, reflect units in...
2020-08-24 v1neols: Remove stray command
2020-08-24 v1neols: Make use of zero-initialization.
2020-08-22 Frank Stettnerlibsigrok.h: Add Joule, Coulomb, and Ah units.
2020-08-22 Frank Stettnerlibsigrok.h: Add MQ for electric charge.
2020-08-22 Frank Stettnerteleinfo: Fix measured quantity (energy, not power).
2020-08-22 Gerhard Sittigoutput/csv: always generate text for analog/logic data...
2020-08-22 Gerhard Sittigoutput/csv: check unsupported/untested input signal...
2020-08-22 Timo Kokkonenserial-dmm: Add GW Instek GDM-397 meter support.
2020-08-22 Gerhard Sittigkorad-kaxxxxp: add support for forced "detection" of...
2020-08-22 Gerhard Sittighwdriver: introduce SR_CONF_FORCE_DETECT config key...
2020-08-22 Gerhard Sittigkorad-kaxxxxp: add config_get() support for SR_CONF_CONN
2020-08-20 Timo Kokkonenscpi-dmm: Remove SYST:LOC hack for GWInstek meters.
2020-08-20 Timo Kokkonenscpi-dmm: Add new command DMM_CMD_SETUP_LOCAL.
2020-08-17 Gerhard Sittigscpi-dmm: alpha-sort the list of supported devices...
2020-08-17 Gerhard Sittigscpi-dmm: minor style adjustment (gdm906x, analog init...
2020-08-17 Gerhard Sittigscpi: Raise severity when IDN response lacks the serial...
2020-08-17 Gerhard Sittigscpi_serial: Rephrase NL and NL+CR line termination...
2020-08-17 Timo Kokkonenscpi_serial: Add GW-Instek GPD-9061 (USBCDC mode) VID...
2020-08-17 Timo Kokkonenscpi-dmm: Add support for GW-Instek 906X series bench...
2020-08-17 Timo Kokkonenscpi-dmm: Add support for GW-Instek 8200A series bench...
2020-08-17 Timo Kokkonenscpi: Support devices that omit serial number in *IDN...
2020-08-17 Timo Kokkonenscpi_serial: Add support for (broken) devices sending...
2020-08-09 Gerhard Sittigserial_hid: add iokit= prefix for the Mac IOKit special...
2020-08-05 Gerhard Sittigoutput/csv: complete and improve timestamp construction...
2020-08-05 Earle F. Philhower... output/csv: Avoid accumulated timestamp error for odd...
2020-08-03 Timo Kokkonengwinstek-gpd: Add missing SW limits API calls.
2020-08-03 Gerhard Sittigsw_limits: add const for limits param for config_get
2020-08-01 Gerhard Sittigserial: make failed flush() in open() non-fatal, CP2110...
2020-08-01 Timo Kokkonengwinstek-gpd: Add support to old (hardware) revision...
2020-07-31 Timo Kokkonengwinstek-gpd: Add support for GPD-3303S.
2020-07-31 Gerhard Sittigoutput/ascii: data type nits, rephrase sample bit access
2020-07-31 Gerhard Sittigoutput/ascii: style nits in name alignment and trigger...
2020-07-31 v1neoutput/ascii: Also print trigger marker for "short...
2020-07-31 v1neoutput/ascii: Vertically align logic channel names
2020-07-31 v1neoutput/ascii: Remove unused variable
2020-07-28 milan hauthanalog: avoid double free in '-O analog' shutdown path
2020-07-27 Gerhard Sittigoutput/srzip: improve robustness (analog-only acquisition)
2020-07-27 Mike Waltersscpi-dmm: Add Agilent 34410A.
2020-07-26 Wolfram Sangserial: flush() after open() in the serial core.
2020-07-26 Gerhard Sittigbt: drop bt_put_le16() dependency (not universally...
2020-07-24 Gerhard Sittiginput: use common support to send samplerate meta packet
2020-07-24 Gerhard Sittiginput/saleae: reduce the format match routine's greed
2020-07-24 Gerhard Sittiginput/saleae: introduce input module for Saleae Logic...
2020-07-24 Gerhard Sittiglibsigrok-internal: add endianess helpers for floating...
2020-07-24 Gerhard Sittiginput/vcd: unbreak the logic which skips a user specifi...
2020-07-24 Gerhard Sittigoutput/srzip: queue samples before ZIP operation
2020-07-24 Gerhard Sittigoutput/vcd: support analog data, more channels, minor...
2020-07-24 Gerhard Sittiginput/vcd: rework VCD file import logic (vector, intege...
2020-07-24 Gerhard Sittiginput: introduce helper for buffered submission of...
2020-07-23 Gerhard Sittiginput/binary: align sr_session_send() chunks to unit...
2020-07-13 Soeren Apelfx2lafw: Use 1 as default for frame limit and reset...
next