From: Uwe Hermann Date: Sat, 2 Feb 2013 10:35:20 +0000 (+0100) Subject: brymen-dmm: Cosmetics, coding-style, consistency. X-Git-Tag: dsupstream~282 X-Git-Url: https://sigrok.org/gitweb/?p=libsigrok.git;a=commitdiff_plain;h=c5d6f5cc1c0069a5141c5c76f7e17dd592427138 brymen-dmm: Cosmetics, coding-style, consistency. Also, name the driver "brymen-bm857" in preparation to doing "subdrivers" for other Brymen models later (similar to serial-dmm). --- diff --git a/hardware/brymen-dmm/api.c b/hardware/brymen-dmm/api.c index 8ff9c2e9..b1b3acb9 100644 --- a/hardware/brymen-dmm/api.c +++ b/hardware/brymen-dmm/api.c @@ -17,12 +17,6 @@ * along with this program. If not, see . */ -#include -#include -#include -#include -#include "libsigrok.h" -#include "libsigrok-internal.h" #include "protocol.h" static const int hwopts[] = { @@ -39,8 +33,8 @@ static const int hwcaps[] = { 0, }; -SR_PRIV struct sr_dev_driver brymen_dmm_driver_info; -static struct sr_dev_driver *di = &brymen_dmm_driver_info; +SR_PRIV struct sr_dev_driver brymen_bm857_driver_info; +static struct sr_dev_driver *di = &brymen_bm857_driver_info; static int hw_init(struct sr_context *sr_ctx) { @@ -51,6 +45,7 @@ static void free_instance(void *inst) { struct sr_dev_inst *sdi; struct dev_context *devc; + if (!(sdi = inst)) return; if (!(devc = sdi->priv)) @@ -82,11 +77,13 @@ static GSList *brymen_scan(const char *conn, const char *serialcomm) struct sr_serial_dev_inst *serial; GSList *devices; int ret; + uint8_t buf[128]; + size_t len; if (!(serial = sr_serial_dev_inst_new(conn, serialcomm))) return NULL; - if (serial_open(serial, SERIAL_RDWR|SERIAL_NONBLOCK) != SR_OK) + if (serial_open(serial, SERIAL_RDWR | SERIAL_NONBLOCK) != SR_OK) return NULL; sr_info("Probing port %s.", conn); @@ -94,14 +91,12 @@ static GSList *brymen_scan(const char *conn, const char *serialcomm) devices = NULL; /* Request reading */ - if (brymen_packet_request(serial) == -1) { - sr_err("Unable to send command. code: %d.", errno); + if ((ret = brymen_packet_request(serial)) < 0) { + sr_err("Unable to send command: %d.", ret); goto scan_cleanup; } - uint8_t buf[128]; - size_t len = 128; - + len = 128; ret = brymen_stream_detect(serial, buf, &len, brymen_packet_length, brymen_packet_is_valid, 1000, 9600); if (ret != SR_OK) @@ -129,7 +124,6 @@ static GSList *brymen_scan(const char *conn, const char *serialcomm) drvc->instances = g_slist_append(drvc->instances, sdi); devices = g_slist_append(devices, sdi); - scan_cleanup: serial_close(serial); @@ -153,12 +147,12 @@ static GSList *hw_scan(GSList *options) for (l = options; l; l = l->next) { src = l->data; switch (src->key) { - case SR_CONF_CONN: - conn = src->value; - break; - case SR_CONF_SERIALCOMM: - serialcomm = src->value; - break; + case SR_CONF_CONN: + conn = src->value; + break; + case SR_CONF_SERIALCOMM: + serialcomm = src->value; + break; } } if (!conn) { @@ -169,7 +163,7 @@ static GSList *hw_scan(GSList *options) /* Use the provided comm specs. */ devices = brymen_scan(conn, serialcomm); } else { - /* But 9600 8N1 should work all of the time */ + /* But 9600/8n1 should work all of the time. */ devices = brymen_scan(conn, "9600/8n1/dtr=1/rts=1"); } @@ -232,12 +226,12 @@ static int config_list(int key, const void **data, (void)sdi; switch (key) { - case SR_CONF_SCAN_OPTIONS: - *data = hwopts; - break; - case SR_CONF_DEVICE_OPTIONS: - *data = hwcaps; - break; + case SR_CONF_SCAN_OPTIONS: + *data = hwopts; + break; + case SR_CONF_DEVICE_OPTIONS: + *data = hwcaps; + break; default: sr_err("Unknown config key: %d.", key); return SR_ERR_ARG; @@ -264,11 +258,11 @@ static int hw_dev_config_set(int id, const void *value, ret = SR_OK; switch (id) { - case SR_CONF_LIMIT_SAMPLES: - devc->limit_samples = *(const uint64_t*)value; + case SR_CONF_LIMIT_SAMPLES: + devc->limit_samples = *(const uint64_t *)value; break; - case SR_CONF_LIMIT_MSEC: - devc->limit_msec = *(const uint64_t*)value; + case SR_CONF_LIMIT_MSEC: + devc->limit_msec = *(const uint64_t *)value; break; default: sr_err("Unknown hardware capability: %d.", id); @@ -345,9 +339,9 @@ static int hw_dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data) return SR_OK; } -SR_PRIV struct sr_dev_driver brymen_dmm_driver_info = { - .name = "brymen-dmm", - .longname = "Brymen BM850 series", +SR_PRIV struct sr_dev_driver brymen_bm857_driver_info = { + .name = "brymen-bm857", + .longname = "Brymen BM857", .api_version = 1, .init = hw_init, .cleanup = hw_cleanup, diff --git a/hardware/brymen-dmm/parser.c b/hardware/brymen-dmm/parser.c index b2c118b2..496ff3a0 100644 --- a/hardware/brymen-dmm/parser.c +++ b/hardware/brymen-dmm/parser.c @@ -1,5 +1,5 @@ /* - * This file is part of the sigrok project. + * This file is part of the libsigrok project. * * Copyright (C) 2012 Alexandru Gagniuc * @@ -18,17 +18,14 @@ */ #include "protocol.h" -#include -#include -#include -/* - * Flags passed from the DMM. - */ +#define MAX_PACKET_LEN 22 + +/* Flags passed from the DMM. */ struct brymen_flags { - gboolean low_batt; - gboolean decibel, duty_cycle, hertz, amp, beep, ohm, fahrenheit; - gboolean celsius, capacitance, diode, volt, dc, ac; + gboolean is_low_batt, is_decibel, is_duty_cycle, is_hertz, is_amp; + gboolean is_beep, is_ohm, is_fahrenheit, is_celsius, is_capacitance; + gboolean is_diode, is_volt, is_dc, is_ac; }; struct bm850_command { @@ -56,32 +53,36 @@ struct brymen_tail { /* * We only have one command because we only support the BM-857. However, the - * driver is easily extensible to support more models, as the protocols are very - * similar. + * driver is easily extensible to support more models, as the protocols are + * very similar. */ enum { BM_CMD_REQUEST_READING = 0x00, }; - static int bm_send_command(uint8_t command, uint8_t arg1, uint8_t arg2, struct sr_serial_dev_inst *serial) { - struct bm850_command cmdout = { - .dle = 0x10, .stx = 0x02, - .cmd = command, - .arg = {arg1, arg2}, - .checksum = arg1^arg2, .dle2 = 0x10, .etx = 0x03}; - int written; - - /* TODO: How do we compute the checksum? Hardware seems to ignore it */ - - /* Request reading */ - written = serial_write(serial, &cmdout, sizeof(cmdout)); - if(written != sizeof(cmdout)) - return SR_ERR; - - return SR_OK; + struct bm850_command cmdout; + int written; + + cmdout.dle = 0x10; + cmdout.stx = 0x02; + cmdout.cmd = command; + cmdout.arg[0] = arg1; + cmdout.arg[1] = arg2; + cmdout.checksum = arg1 ^ arg2; + cmdout.dle2 = 0x10; + cmdout.etx = 0x03; + + /* TODO: How to compute the checksum? Hardware seems to ignore it. */ + + /* Request reading. */ + written = serial_write(serial, &cmdout, sizeof(cmdout)); + if (written != sizeof(cmdout)) + return SR_ERR; + + return SR_OK; } SR_PRIV int brymen_packet_request(struct sr_serial_dev_inst *serial) @@ -92,29 +93,29 @@ SR_PRIV int brymen_packet_request(struct sr_serial_dev_inst *serial) SR_PRIV int brymen_packet_length(const uint8_t *buf, int *len) { struct brymen_header *hdr; - const int brymen_max_packet_len = 22; int packet_len; - const size_t buflen = *len; - - hdr = (void*)buf; - + size_t buflen; + + buflen = *len; + hdr = (void *)buf; + /* Did we receive a complete header yet? */ - if (buflen < sizeof(*hdr) ) + if (buflen < sizeof(*hdr)) return PACKET_NEED_MORE_DATA; - + if (hdr->dle != 0x10 || hdr->stx != 0x02) return PACKET_INVALID_HEADER; - - /* Our packet includes the header, the payload, and the tail */ + + /* Our packet includes the header, the payload, and the tail. */ packet_len = sizeof(*hdr) + hdr->len + sizeof(struct brymen_tail); - - /* In case we pick up an invalid header, limit our search */ - if (packet_len > brymen_max_packet_len) { + + /* In case we pick up an invalid header, limit our search. */ + if (packet_len > MAX_PACKET_LEN) { sr_spew("Header specifies an invalid payload length: %i.", hdr->len); return PACKET_INVALID_HEADER; } - + *len = packet_len; sr_spew("Expecting a %d-byte packet.", *len); return PACKET_HEADER_OK; @@ -126,16 +127,18 @@ SR_PRIV gboolean brymen_packet_is_valid(const uint8_t *buf) struct brymen_tail *tail; int i; uint8_t chksum = 0; - const uint8_t *payload = buf + sizeof(struct brymen_header); + uint8_t *payload; - hdr = (void*)buf; - tail = (void*)(payload + hdr->len); + payload = (uint8_t *)(buf + sizeof(struct brymen_header)); + + hdr = (void *)buf; + tail = (void *)(payload + hdr->len); for (i = 0; i< hdr->len; i++) chksum ^= payload[i]; if (tail->checksum != chksum) { - sr_dbg("Packet has invalid checksum 0x%.2x. Expected 0x%.2x", + sr_dbg("Packet has invalid checksum 0x%.2x. Expected 0x%.2x.", chksum, tail->checksum); return FALSE; } @@ -143,7 +146,7 @@ SR_PRIV gboolean brymen_packet_is_valid(const uint8_t *buf) return TRUE; } -static int parse_value(const char *strbuf, const int len, float *floatval) +static int parse_value(const char *strbuf, int len, float *floatval) { int s, d; char str[32]; @@ -155,125 +158,129 @@ static int parse_value(const char *strbuf, const int len, float *floatval) } memset(str, 0, sizeof(str)); - /* Spaces may interfere with strtod parsing the exponent. Strip them */ + /* Spaces may interfere with strtod parsing the exponent. Strip them. */ for (s = 0, d = 0; s < len; s++) if (strbuf[s] != ' ') str[d++] = strbuf[s]; - /* YES, it's that simple !*/ + /* Yes, it's that simple! */ *floatval = strtod(str, NULL); return SR_OK; } + static void parse_flags(const uint8_t *buf, struct brymen_flags *info) { - const uint8_t * bfunc = buf + sizeof(struct brymen_header); - - info->low_batt = (bfunc[3] & (1 << 7)) != 0; - - info->decibel = (bfunc[1] & (1 << 5)) != 0; - info->duty_cycle = (bfunc[1] & (1 << 3)) != 0; - info->hertz = (bfunc[1] & (1 << 2)) != 0; - info->amp = (bfunc[1] & (1 << 1)) != 0; - info->beep = (bfunc[1] & (1 << 0)) != 0; - - info->ohm = (bfunc[0] & (1 << 7)) != 0; - info->fahrenheit = (bfunc[0] & (1 << 6)) != 0; - info->celsius = (bfunc[0] & (1 << 5)) != 0; - info->diode = (bfunc[0] & (1 << 4)) != 0; - info->capacitance = (bfunc[0] & (1 << 3)) != 0; - info->volt = (bfunc[0] & (1 << 2)) != 0; - info->dc = (bfunc[0] & (1 << 1)) != 0; - info->ac = (bfunc[0] & (1 << 0)) != 0; + info->is_low_batt = (buf[4 + 3] & (1 << 7)) != 0; + + info->is_decibel = (buf[4 + 1] & (1 << 5)) != 0; + info->is_duty_cycle = (buf[4 + 1] & (1 << 3)) != 0; + info->is_hertz = (buf[4 + 1] & (1 << 2)) != 0; + info->is_amp = (buf[4 + 1] & (1 << 1)) != 0; + info->is_beep = (buf[4 + 1] & (1 << 0)) != 0; + + info->is_ohm = (buf[4 + 0] & (1 << 7)) != 0; + info->is_fahrenheit = (buf[4 + 0] & (1 << 6)) != 0; + info->is_celsius = (buf[4 + 0] & (1 << 5)) != 0; + info->is_diode = (buf[4 + 0] & (1 << 4)) != 0; + info->is_capacitance = (buf[4 + 0] & (1 << 3)) != 0; + info->is_volt = (buf[4 + 0] & (1 << 2)) != 0; + info->is_dc = (buf[4 + 0] & (1 << 1)) != 0; + info->is_ac = (buf[4 + 0] & (1 << 0)) != 0; } SR_PRIV int sr_brymen_parse(const uint8_t *buf, float *floatval, struct sr_datafeed_analog *analog, void *info) { struct brymen_flags flags; - struct brymen_header *hdr = (void*) buf; - const uint8_t *bfunc = buf + sizeof(struct brymen_header); + struct brymen_header *hdr; + uint8_t *bfunc; int asciilen; (void)info; + + hdr = (void *)buf; + bfunc = (uint8_t *)(buf + sizeof(struct brymen_header)); + analog->mqflags = 0; - /* Give some debug info about the package */ + /* Give some debug info about the package. */ asciilen = hdr->len - 4; sr_dbg("DMM flags: %.2x %.2x %.2x %.2x", bfunc[3], bfunc[2], bfunc[1], bfunc[0]); - /* Value is an ASCII string */ + /* Value is an ASCII string. */ sr_dbg("DMM packet: \"%.*s\"", asciilen, bfunc + 4); parse_flags(buf, &flags); - parse_value((const char*)(bfunc + 4), asciilen, floatval); + parse_value((const char *)(bfunc + 4), asciilen, floatval); - if (flags.volt) { + if (flags.is_volt) { analog->mq = SR_MQ_VOLTAGE; analog->unit = SR_UNIT_VOLT; } - if (flags.amp) { + if (flags.is_amp) { analog->mq = SR_MQ_CURRENT; analog->unit = SR_UNIT_AMPERE; } - if (flags.ohm) { - if (flags.beep) + if (flags.is_ohm) { + if (flags.is_beep) analog->mq = SR_MQ_CONTINUITY; else analog->mq = SR_MQ_RESISTANCE; analog->unit = SR_UNIT_OHM; } - if (flags.hertz) { + if (flags.is_hertz) { analog->mq = SR_MQ_FREQUENCY; analog->unit = SR_UNIT_HERTZ; } - if (flags.duty_cycle) { + if (flags.is_duty_cycle) { analog->mq = SR_MQ_DUTY_CYCLE; analog->unit = SR_UNIT_PERCENTAGE; } - if (flags.capacitance) { + if (flags.is_capacitance) { analog->mq = SR_MQ_CAPACITANCE; analog->unit = SR_UNIT_FARAD; } - if (flags.fahrenheit) { + if (flags.is_fahrenheit) { analog->mq = SR_MQ_TEMPERATURE; analog->unit = SR_UNIT_FAHRENHEIT; } - if (flags.celsius) { + if (flags.is_celsius) { analog->mq = SR_MQ_TEMPERATURE; analog->unit = SR_UNIT_CELSIUS; } - if (flags.capacitance) { + if (flags.is_capacitance) { analog->mq = SR_MQ_CAPACITANCE; analog->unit = SR_UNIT_FARAD; } + /* - * The high-end brymen models have a configurable reference impedance. + * The high-end Brymen models have a configurable reference impedance. * When the reference impedance is changed, the DMM sends one packet * with the value of the new reference impedance. Both decibel and ohm * flags are set in this case, so we must be careful to correctly - * identify the value as ohm, not dBmW + * identify the value as ohm, not dBmW. */ - if (flags.decibel && !flags.ohm) { + if (flags.is_decibel && !flags.is_ohm) { analog->mq = SR_MQ_POWER; analog->unit = SR_UNIT_DECIBEL_MW; /* * For some reason, dBm measurements are sent by the multimeter * with a value three orders of magnitude smaller than the * displayed value. - * */ + */ *floatval *= 1000; } - if (flags.diode) + if (flags.is_diode) analog->mqflags |= SR_MQFLAG_DIODE; - /* We can have both AC+DC in a single measurement */ - if (flags.ac) + /* We can have both AC+DC in a single measurement. */ + if (flags.is_ac) analog->mqflags |= SR_MQFLAG_AC; - if (flags.dc) + if (flags.is_dc) analog->mqflags |= SR_MQFLAG_DC; - if (flags.low_batt) + if (flags.is_low_batt) sr_info("Low battery!"); return SR_OK; -} \ No newline at end of file +} diff --git a/hardware/brymen-dmm/protocol.c b/hardware/brymen-dmm/protocol.c index 41bcd4c5..425697ee 100644 --- a/hardware/brymen-dmm/protocol.c +++ b/hardware/brymen-dmm/protocol.c @@ -17,17 +17,12 @@ * along with this program. If not, see . */ -#include "libsigrok.h" -#include "libsigrok-internal.h" #include "protocol.h" -#include - -/* --- parser.c --- */ +/* parser.c */ SR_PRIV int sr_brymen_parse(const uint8_t *buf, float *floatval, struct sr_datafeed_analog *analog, void *info); - static void handle_packet(const uint8_t *buf, struct sr_dev_inst *sdi) { float floatval; @@ -36,7 +31,7 @@ static void handle_packet(const uint8_t *buf, struct sr_dev_inst *sdi) struct sr_datafeed_analog analog; devc = sdi->priv; - + analog.num_samples = 1; analog.mq = -1; @@ -73,19 +68,19 @@ static void handle_new_data(struct sr_dev_inst *sdi) /* Now look for packets in that data. */ while (status != PACKET_NEED_MORE_DATA) { - /* We don't have a header, look for one */ + /* We don't have a header, look for one. */ if (devc->next_packet_len == 0) { len = devc->buflen - offset; status = brymen_packet_length(devc->buf + offset, &len); if (status == PACKET_HEADER_OK) { - /* We know how large the packet will be */ + /* We know how large the packet will be. */ devc->next_packet_len = len; } else if (status == PACKET_NEED_MORE_DATA) { - /* We did not yet receive the complete header */ + /* We didn't yet receive the full header. */ devc->next_packet_len = 0; break; } else { - /* Invalid header. Move on */ + /* Invalid header. Move on. */ devc->next_packet_len = 0; offset++; continue; @@ -96,13 +91,14 @@ static void handle_new_data(struct sr_dev_inst *sdi) if (devc->buflen - offset < devc->next_packet_len) break; - /* We should have a full packet here, so we can check it */ + /* We should have a full packet here, so we can check it. */ if (brymen_packet_is_valid(devc->buf + offset)) { handle_packet(devc->buf + offset, sdi); offset += devc->next_packet_len; } else { offset++; } + /* We are done with this packet. Look for a new one. */ devc->next_packet_len = 0; } @@ -132,8 +128,7 @@ SR_PRIV int brymen_dmm_receive_data(int fd, int revents, void *cb_data) handle_new_data(sdi); } else { /* Timeout, send another packet request. */ - ret = brymen_packet_request(devc->serial); - if (ret < 0) { + if ((ret = brymen_packet_request(devc->serial)) < 0) { sr_err("Failed to request packet: %d.", ret); return FALSE; } @@ -163,7 +158,7 @@ SR_PRIV int brymen_dmm_receive_data(int fd, int revents, void *cb_data) * @param serial Previously initialized serial port structure. * @param buf Buffer containing the bytes to write. * @param buflen Size of the buffer. - * @param packet_size Callback that assesses the size of the incoming packet/ + * @param get_packet_size Callback that assesses the size of incoming packets. * @param is_valid Callback that assesses whether the packet is valid or not. * @param timeout_ms The timeout after which, if no packet is detected, to * abort scanning. @@ -187,7 +182,7 @@ SR_PRIV int brymen_stream_detect(struct sr_serial_dev_inst *serial, maxlen = *buflen; sr_dbg("Detecting packets on FD %d (timeout = %" PRIu64 - "ms, baudrate = %d).", serial->fd, timeout_ms, baudrate); + "ms, baudrate = %d).", serial->fd, timeout_ms, baudrate); /* Assume 8n1 transmission. That is 10 bits for every byte. */ byte_delay_us = 10 * (1000000 / baudrate); @@ -198,7 +193,7 @@ SR_PRIV int brymen_stream_detect(struct sr_serial_dev_inst *serial, len = serial_read(serial, &buf[ibuf], maxlen - ibuf); if (len > 0) { ibuf += len; - sr_spew("Read %d bytes", len); + sr_spew("Read %d bytes.", len); } time = g_get_monotonic_time() - start; @@ -211,10 +206,10 @@ SR_PRIV int brymen_stream_detect(struct sr_serial_dev_inst *serial, status = get_packet_size(&buf[i], &packet_len); switch(status) { case PACKET_HEADER_OK: - /* We know how much data we need to wait for */ + /* We know how much data we need to wait for. */ break; case PACKET_NEED_MORE_DATA: - /* We did not receive the full header */ + /* We did not receive the full header. */ packet_len = 0; break; case PACKET_INVALID_HEADER: @@ -222,7 +217,7 @@ SR_PRIV int brymen_stream_detect(struct sr_serial_dev_inst *serial, /* * We had enough data, but here was an error in * parsing the header. Restart parsing from the - * next byte + * next byte. */ packet_len = 0; i++; @@ -230,22 +225,24 @@ SR_PRIV int brymen_stream_detect(struct sr_serial_dev_inst *serial, } } - if ( (stream_len >= packet_len) && (packet_len != 0) ) { + if ((stream_len >= packet_len) && (packet_len != 0)) { /* We have at least a packet's worth of data. */ if (is_valid(&buf[i])) { sr_spew("Found valid %d-byte packet after " - "%" PRIu64 "ms.", packet_len, time); + "%" PRIu64 "ms.", packet_len, time); *buflen = ibuf; return SR_OK; } else { sr_spew("Got %d bytes, but not a valid " - "packet.", packet_len); + "packet.", packet_len); } + /* Not a valid packet. Continue searching. */ i++; packet_len = 0; } + if (time >= (int64_t)timeout_ms) { /* Timeout */ sr_dbg("Detection timed out after %dms.", time); diff --git a/hardware/brymen-dmm/protocol.h b/hardware/brymen-dmm/protocol.h index 7c981cc1..278d7d68 100644 --- a/hardware/brymen-dmm/protocol.h +++ b/hardware/brymen-dmm/protocol.h @@ -21,6 +21,10 @@ #define LIBSIGROK_HARDWARE_BRYMEN_DMM_PROTOCOL_H #include +#include +#include +#include +#include #include "libsigrok.h" #include "libsigrok-internal.h" @@ -33,7 +37,6 @@ #define sr_warn(s, args...) sr_warn(DRIVER_LOG_DOMAIN s, ## args) #define sr_err(s, args...) sr_err(DRIVER_LOG_DOMAIN s, ## args) - #define DMM_BUFSIZE 256 enum packet_len_status { @@ -68,10 +71,10 @@ struct dev_context { }; /** - * Callback that assesses the size and status of the incoming packet + * Callback that assesses the size and status of the incoming packet. * * @return PACKET_HEADER_OK - This is a proper packet header. - * PACKET_NEED_MORE_DATA The buffer does not contain the entire header + * PACKET_NEED_MORE_DATA The buffer does not contain the entire header. * PACKET_INVALID_HEADER Not a valid start of packet. */ typedef int (*packet_length_t)(const uint8_t *buf, int *len); @@ -87,4 +90,5 @@ SR_PRIV int brymen_stream_detect(struct sr_serial_dev_inst *serial, packet_length_t get_packet_size, packet_valid_t is_valid, uint64_t timeout_ms, int baudrate); + #endif diff --git a/hwdriver.c b/hwdriver.c index c2d7a6fe..026c4824 100644 --- a/hwdriver.c +++ b/hwdriver.c @@ -84,7 +84,7 @@ static struct sr_config_info sr_config_info_data[] = { /** @cond PRIVATE */ #ifdef HAVE_HW_BRYMEN_DMM -extern SR_PRIV struct sr_dev_driver brymen_dmm_driver_info; +extern SR_PRIV struct sr_dev_driver brymen_bm857_driver_info; #endif #ifdef HAVE_HW_COLEAD_SLM extern SR_PRIV struct sr_dev_driver colead_slm_driver_info; @@ -164,7 +164,7 @@ extern SR_PRIV struct sr_dev_driver voltcraft_vc820_driver_info; static struct sr_dev_driver *drivers_list[] = { #ifdef HAVE_HW_BRYMEN_DMM - &brymen_dmm_driver_info, + &brymen_bm857_driver_info, #endif #ifdef HAVE_HW_COLEAD_SLM &colead_slm_driver_info,