From: King Kévin Date: Fri, 11 Dec 2020 20:18:55 +0000 (+0100) Subject: zketech-ebd-usb: Multiple fixes and upgrades. X-Git-Url: https://sigrok.org/gitweb/?p=libsigrok.git;a=commitdiff_plain;h=ab3e9c8af67b5919dd7cfb3119081bfd5858cc81 zketech-ebd-usb: Multiple fixes and upgrades. - fix load toggling at acquisition stop - messages are sent byte per byte with a pause in between since bytes were sometimes dropped - incoming stream is parsed continuously instead of using a fixed length (the messages have a constant start/stop) - add under-voltage threshold (under which the load would stop) as configuration - add D+/D- voltage measurements as two new channels (had to rename the existing to avoid confusion) --- diff --git a/src/hardware/zketech-ebd-usb/api.c b/src/hardware/zketech-ebd-usb/api.c index 3327aff7..7aeb8c8e 100644 --- a/src/hardware/zketech-ebd-usb/api.c +++ b/src/hardware/zketech-ebd-usb/api.c @@ -2,6 +2,7 @@ * This file is part of the libsigrok project. * * Copyright (C) 2018 Sven Bursch-Osewold + * Copyright (C) 2019 King Kévin * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -32,6 +33,7 @@ static const uint32_t drvopts[] = { static const uint32_t devopts[] = { SR_CONF_CONTINUOUS, SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, + SR_CONF_UNDER_VOLTAGE_CONDITION_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, }; @@ -43,7 +45,7 @@ static GSList *scan(struct sr_dev_driver *di, GSList *options) const char *conn, *serialcomm; struct sr_config *src; struct sr_serial_dev_inst *serial; - uint8_t reply[MSG_LEN]; + uint8_t reply[MSG_MAX_LEN]; conn = NULL; serialcomm = NULL; @@ -76,12 +78,15 @@ static GSList *scan(struct sr_dev_driver *di, GSList *options) sdi->inst_type = SR_INST_SERIAL; sdi->conn = serial; - sr_channel_new(sdi, 0, SR_CHANNEL_ANALOG, TRUE, "V"); - sr_channel_new(sdi, 1, SR_CHANNEL_ANALOG, TRUE, "I"); + sr_channel_new(sdi, 0, SR_CHANNEL_ANALOG, TRUE, "V.VBUS"); + sr_channel_new(sdi, 1, SR_CHANNEL_ANALOG, TRUE, "I.VBUS"); + sr_channel_new(sdi, 2, SR_CHANNEL_ANALOG, TRUE, "V.D+"); + sr_channel_new(sdi, 3, SR_CHANNEL_ANALOG, TRUE, "V.D-"); devc = g_malloc0(sizeof(struct dev_context)); g_mutex_init(&devc->rw_mutex); devc->current_limit = 0; + devc->voltage_limit = 0; devc->running = FALSE; devc->load_activated = FALSE; sr_sw_limits_init(&devc->limits); @@ -89,10 +94,12 @@ static GSList *scan(struct sr_dev_driver *di, GSList *options) /* Starting device. */ ebd_init(serial, devc); - int ret = ebd_read_chars(serial, MSG_LEN, reply); - if (ret != MSG_LEN || reply[MSG_FRAME_BEGIN_POS] != MSG_FRAME_BEGIN \ - || reply[MSG_FRAME_END_POS] != MSG_FRAME_END) { - sr_warn("Invalid message received!"); + int ret = ebd_read_message(serial, MSG_MAX_LEN, reply); + if (ret < 0) { + sr_warn("Could not receive message!"); + ret = SR_ERR; + } else if (0 == ret) { + sr_warn("No message received!"); ret = SR_ERR; } ebd_stop(serial, devc); @@ -139,6 +146,11 @@ static int config_get(uint32_t key, GVariant **data, if (ret == SR_OK) *data = g_variant_new_double(fvalue); return ret; + case SR_CONF_UNDER_VOLTAGE_CONDITION_THRESHOLD: + ret = ebd_get_voltage_limit(sdi, &fvalue); + if (ret == SR_OK) + *data = g_variant_new_double(fvalue); + return ret; default: return SR_ERR_NA; } @@ -164,6 +176,11 @@ static int config_set(uint32_t key, GVariant *data, if (value < 0.0 || value > 4.0) return SR_ERR_ARG; return ebd_set_current_limit(sdi, value); + case SR_CONF_UNDER_VOLTAGE_CONDITION_THRESHOLD: + value = g_variant_get_double(data); + if (value < 0.0 || value > 21.0) + return SR_ERR_ARG; + return ebd_set_voltage_limit(sdi, value); default: return SR_ERR_NA; } @@ -177,7 +194,10 @@ static int config_list(uint32_t key, GVariant **data, case SR_CONF_DEVICE_OPTIONS: return STD_CONFIG_LIST(key, data, sdi, cg, scanopts, drvopts, devopts); case SR_CONF_CURRENT_LIMIT: - *data = std_gvar_min_max_step(0.0, 4.0, 0.01); + *data = std_gvar_min_max_step(0.0, 4.0, 0.001); + break; + case SR_CONF_UNDER_VOLTAGE_CONDITION_THRESHOLD: + *data = std_gvar_min_max_step(0.0, 21.0, 0.01); break; default: return SR_ERR_NA; @@ -198,8 +218,6 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi) std_session_send_df_header(sdi); ebd_init(serial, devc); - if (!ebd_current_is0(devc)) - ebd_loadstart(serial, devc); serial_source_add(sdi->session, serial, G_IO_IN, 100, ebd_receive_data, (void *)sdi); @@ -209,7 +227,15 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi) static int dev_acquisition_stop(struct sr_dev_inst *sdi) { - ebd_loadstop(sdi->conn, sdi->priv); + struct dev_context *devc; + + if (sdi) { + devc = sdi->priv; + if (devc->load_activated) { + ebd_loadtoggle(sdi->conn, devc); + } + ebd_stop(sdi->conn, devc); + } return std_serial_dev_acquisition_stop(sdi); } diff --git a/src/hardware/zketech-ebd-usb/protocol.c b/src/hardware/zketech-ebd-usb/protocol.c index 4c586f6f..9751e910 100644 --- a/src/hardware/zketech-ebd-usb/protocol.c +++ b/src/hardware/zketech-ebd-usb/protocol.c @@ -2,6 +2,7 @@ * This file is part of the libsigrok project. * * Copyright (C) 2018 Sven Bursch-Osewold + * Copyright (C) 2019 King Kévin * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -39,10 +40,13 @@ static int send_cmd(struct sr_serial_dev_inst *serial, uint8_t buf[], size_t cou int ret; log_buf("Sending", buf, count); - ret = serial_write_blocking(serial, buf, count, 0); - if (ret < 0) { - sr_err("Error sending command: %d.", ret); - return ret; + for (size_t byte = 0; byte < count; byte++) { + ret = serial_write_blocking(serial, &buf[byte], 1, 0); + if (ret < 0) { + sr_err("Error sending command: %d.", ret); + return ret; + } + g_usleep(10000); // wait between bytes to prevent data loss at the receiving side } return (ret == (int)count) ? SR_OK : SR_ERR; @@ -71,9 +75,9 @@ static int send_cfg(struct sr_serial_dev_inst *serial, struct dev_context *devc) uint8_t send[] = { 0xfa, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8 }; encode_value(devc->current_limit, &send[2], &send[3], 1000.0); + encode_value(devc->voltage_limit, &send[4], &send[5], 100.0); - send[8] = send[1] ^ send[2] ^ send[3] ^ send[4] ^ send[5] ^ \ - send[6] ^ send[7]; + send[8] = send[1] ^ send[2] ^ send[3] ^ send[4] ^ send[5] ^ send[6] ^ send[7]; return send_cmd(serial, send, 10); } @@ -86,8 +90,6 @@ SR_PRIV int ebd_init(struct sr_serial_dev_inst *serial, struct dev_context *devc (void)devc; int ret = send_cmd(serial, init, 10); - if (ret == SR_OK) - devc->running = TRUE; return ret; } @@ -98,32 +100,34 @@ SR_PRIV int ebd_loadstart(struct sr_serial_dev_inst *serial, struct dev_context uint8_t start[] = { 0xfa, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xf8 }; int ret; + encode_value(devc->current_limit, &start[2], &start[3], 1000.0); + encode_value(devc->voltage_limit, &start[4], &start[5], 100.0); + + start[8] = start[1] ^ start[2] ^ start[3] ^ start[4] ^ start[5] ^ start[6] ^ start[7]; + + sr_info("Activating load"); ret = send_cmd(serial, start, 10); if (ret) return ret; - sr_dbg("Current limit: %f.", devc->current_limit); + sr_dbg("current limit: %.03f", devc->current_limit); + sr_dbg("under-voltage threshold: %.02f", devc->voltage_limit); if (ebd_current_is0(devc)) return SR_OK; - ret = send_cfg(serial, devc); - if (ret == SR_OK) { - sr_dbg("Load activated."); - devc->load_activated = TRUE; - } - return ret; } -/* Stop the load functionality. */ -SR_PRIV int ebd_loadstop(struct sr_serial_dev_inst *serial, struct dev_context *devc) +/* Toggle the load functionality. */ +SR_PRIV int ebd_loadtoggle(struct sr_serial_dev_inst *serial, struct dev_context *devc) { int ret; - uint8_t stop[] = { 0xfa, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0xF8 }; + uint8_t toggle[] = { 0xfa, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0xF8 }; - ret = send_cmd(serial, stop, 10); - if (ret == SR_OK) - devc->load_activated = FALSE; + (void) devc; + + sr_info("Toggling load"); + ret = send_cmd(serial, toggle, 10); return ret; } @@ -137,36 +141,118 @@ SR_PRIV int ebd_stop(struct sr_serial_dev_inst *serial, struct dev_context *devc (void) devc; ret = send_cmd(serial, stop, 10); - if (ret == SR_OK) { - devc->load_activated = FALSE; - devc->running= FALSE; - } return ret; } -/** Read count bytes from the serial connection. */ -SR_PRIV int ebd_read_chars(struct sr_serial_dev_inst *serial, int count, uint8_t *buf) +/** Receive a complete message + * @param[in] serial Serial port from which to read the packet + * @param[in] length Buffer length + * @param[out] buf Buffer to write packet to + * @return packet length (0 = timeout, -1 = error) + */ +SR_PRIV int ebd_read_message(struct sr_serial_dev_inst *serial, int length, uint8_t *buf) { - int ret, received, turns; - - received = 0; - turns = 0; + // check parameters + if (NULL == serial) { + sr_err("Serial device to receive packet missing."); + return -1; + } + if (length < 3) { + sr_err("Packet buffer not large enough."); + return -1; + } + if (NULL == buf) { + sr_err("Packet buffer missing."); + return -1; + } - do { - ret = serial_read_blocking(serial, buf + received, - count - received, serial_timeout(serial, count)); - if (ret < 0) { - sr_err("Error %d reading %d bytes.", ret, count); - return ret; + int ret; + gboolean message_complete = FALSE; + int message_length = 0; + unsigned int turn = 0; + const unsigned int TURNS = 200; + buf[message_length] = 0; + // try to read data + while (!message_complete && turn < TURNS) { + // wait for header byte + message_length = 0; + while (MSG_FRAME_BEGIN != buf[0] && turn < TURNS) { + ret = serial_read_blocking(serial, &buf[0], 1, serial_timeout(serial, 1)); + if (ret < 0) { + sr_err("Error %d reading byte.", ret); + return ret; + } else if (1 == ret) { + if (MSG_FRAME_BEGIN != buf[message_length]) { + sr_warn("Not frame begin byte %02x received", buf[message_length]); + } else { + sr_dbg("Message header received: %02x", buf[message_length]); + message_length += ret; + } + } + turn++; + } + // read until end byte + while (MSG_FRAME_END != buf[message_length - 1] && message_length < length && turn < TURNS) { + ret = serial_read_blocking(serial, &buf[message_length], 1, serial_timeout(serial, 1)); + if (ret < 0) { + sr_err("Error %d reading byte.", ret); + return ret; + } else if (1 == ret) { + if (MSG_FRAME_BEGIN == buf[message_length]) { + sr_warn("Frame begin before end received"); + message_length = 1; + } else { + sr_dbg("Message data received: %02x", buf[message_length]); + message_length += ret; + } + } + turn++; } - received += ret; - turns++; - } while ((received < count) && (turns < 100)); + // verify frame + if (turn < TURNS) { + if (MSG_FRAME_END == buf[message_length - 1]) { + message_complete = TRUE; + sr_dbg("Message end received"); + } else { + sr_warn("Frame end not received"); + } + } else { + sr_warn("Invalid data and timeout"); + } + } - log_buf("Received", buf, received); + if (message_complete && message_length > 2) { + ret = message_length; + } else if (turn >= TURNS) { + ret = 0; + } else { + ret = -1; + } + return ret; +} + +static void ebd_send_value(const struct sr_dev_inst *sdi, struct sr_channel *ch, + float value, enum sr_mq mq, enum sr_unit unit, int digits) +{ + struct sr_datafeed_packet packet; + struct sr_datafeed_analog analog; + struct sr_analog_encoding encoding; + struct sr_analog_meaning meaning; + struct sr_analog_spec spec; - return received; + sr_analog_init(&analog, &encoding, &meaning, &spec, digits); + analog.meaning->channels = g_slist_append(NULL, ch); + analog.num_samples = 1; + analog.data = &value; + analog.meaning->mq = mq; + analog.meaning->unit = unit; + analog.meaning->mqflags = SR_MQFLAG_DC; + + packet.type = SR_DF_ANALOG; + packet.payload = &analog; + sr_session_send(sdi, &packet); + g_slist_free(analog.meaning->channels); } SR_PRIV int ebd_receive_data(int fd, int revents, void *cb_data) @@ -179,8 +265,7 @@ SR_PRIV int ebd_receive_data(int fd, int revents, void *cb_data) struct sr_analog_encoding encoding; struct sr_analog_meaning meaning; struct sr_analog_spec spec; - float voltage, current, current_limit; - GSList *l; + float voltage, voltage_dp, voltage_dm, current, current_limit, voltage_limit; (void)revents; (void)fd; @@ -192,39 +277,70 @@ SR_PRIV int ebd_receive_data(int fd, int revents, void *cb_data) return FALSE; serial = sdi->conn; + current_limit = devc->current_limit; + voltage_limit = devc->voltage_limit; - uint8_t reply[MSG_LEN]; - int ret = ebd_read_chars(serial, MSG_LEN, reply); + uint8_t reply[MSG_MAX_LEN]; + int ret = ebd_read_message(serial, MSG_MAX_LEN, reply); /* Tests for correct message. */ - if (ret != MSG_LEN) { - sr_err("Message invalid [Len]."); - return (ret < 0) ? ret : SR_ERR; + if (-1 == ret) { + sr_err("Can't receive messages"); + return SR_ERR; + } else if (0 == ret) { + sr_err("No messages received"); + devc->running = FALSE; + return 0; + } else if (ret != 19 || (reply[1] != 0x00 && reply[1] != 0x0a && reply[1] != 0x64 && reply[1] != 0x6e)) { + sr_info("Not measurement message received"); + return ret; } - uint8_t xor = reply[1] ^ reply[2] ^ reply[3] ^ reply[4] ^ \ - reply[5] ^ reply[6] ^ reply[7] ^ reply[8] ^ \ - reply[9] ^ reply[10] ^ reply[11] ^ reply[12] ^ \ - reply[13] ^ reply[14] ^ reply[15] ^ reply[16]; + /* Verify checksum */ + uint8_t checksum = 0; + for (int i = 1; i < ret - 1; i++) { + checksum ^= reply[i]; + } + if (0 != checksum) { + sr_warn("Invalid checksum"); + return ret; /* Don't exit on wrong checksum, the device can recover */ + } - if (reply[MSG_FRAME_BEGIN_POS] != MSG_FRAME_BEGIN || \ - reply[MSG_FRAME_END_POS] != MSG_FRAME_END || \ - xor != reply[MSG_CHECKSUM_POS]) { - sr_err("Message invalid [XOR, BEGIN/END]."); - return SR_ERR; + devc->running = TRUE; + if (0x00 == reply[1] || 0x64 == reply[1]) { + devc->load_activated = FALSE; + } else if (0x0a == reply[1] || 0x6e == reply[1]) { + devc->load_activated = TRUE; } /* Calculate values. */ - sr_dbg("V: %02X %02X A: %02X %02X -- Limit %02X %02X", reply[4], - reply[5], reply[2], reply[3], reply[10], reply[11]); - - voltage = decode_value(reply[4], reply[5], 1000.0); current = decode_value(reply[2], reply[3], 10000.0); - current_limit = decode_value(reply[10], reply[11], 1000.0); + voltage = decode_value(reply[4], reply[5], 1000.0); + voltage_dp = decode_value(reply[6], reply[7], 1000.0); + voltage_dm = decode_value(reply[8], reply[9], 1000.0); + if (0x0a == reply[1]) { + current_limit = decode_value(reply[10], reply[11], 1000.0); + voltage_limit = decode_value(reply[12], reply[13], 100.0); + } - sr_dbg("Voltage %f", voltage); - sr_dbg("Current %f", current); - sr_dbg("Current limit %f", current_limit); + sr_dbg("VBUS current %.04f A", current); + sr_dbg("VBUS voltage %.03f V", voltage); + sr_dbg("D+ voltage %.03f V", voltage_dp); + sr_dbg("D- voltage %.03f V", voltage_dm); + if (0x0a == reply[1]) { + sr_dbg("Current limit %.03f A", current_limit); + sr_dbg("Voltage limit %.03f A", voltage_limit); + } + + // update load state + if (devc->load_activated && ebd_current_is0(devc)) { + ebd_loadtoggle(serial, devc); + } else if (!devc->load_activated && !ebd_current_is0(devc)) { + ebd_loadstart(serial, devc); + } else if (devc->load_activated && (current_limit != devc->current_limit || voltage_limit != devc->voltage_limit)) { + sr_dbg("Adjusting limit from %.03f A %.03f V to %.03f A %.03f V", current_limit, voltage_limit, devc->current_limit, devc->voltage_limit); + send_cfg(serial, devc); + } /* Begin frame. */ std_session_send_df_frame_begin(sdi); @@ -235,27 +351,15 @@ SR_PRIV int ebd_receive_data(int fd, int revents, void *cb_data) packet.payload = &analog; analog.num_samples = 1; - /* Voltage */ - l = g_slist_copy(sdi->channels); - l = g_slist_remove_link(l, g_slist_nth(l, 1)); - meaning.channels = l; - meaning.mq = SR_MQ_VOLTAGE; - meaning.mqflags = SR_MQFLAG_DC; - meaning.unit = SR_UNIT_VOLT; - analog.data = &voltage; - sr_session_send(sdi, &packet); - g_slist_free(l); - - /* Current */ - l = g_slist_copy(sdi->channels); - l = g_slist_remove_link(l, g_slist_nth(l, 0)); - meaning.channels = l; - meaning.mq = SR_MQ_CURRENT; - meaning.mqflags = SR_MQFLAG_DC; - meaning.unit = SR_UNIT_AMPERE; - analog.data = ¤t; - sr_session_send(sdi, &packet); - g_slist_free(l); + /* Values */ + ebd_send_value(sdi, sdi->channels->data, current, + SR_MQ_VOLTAGE, SR_UNIT_VOLT, 3); + ebd_send_value(sdi, sdi->channels->next->data, voltage, + SR_MQ_CURRENT, SR_UNIT_AMPERE, 4); + ebd_send_value(sdi, sdi->channels->next->next->data, voltage_dp, + SR_MQ_VOLTAGE, SR_UNIT_VOLT, 3); + ebd_send_value(sdi, sdi->channels->next->next->next->data, voltage_dm, + SR_MQ_VOLTAGE, SR_UNIT_VOLT, 3); /* End frame. */ std_session_send_df_frame_end(sdi); @@ -303,7 +407,63 @@ SR_PRIV int ebd_set_current_limit(const struct sr_dev_inst *sdi, float current) if (devc->load_activated) { if (ebd_current_is0(devc)) { /* Stop load. */ - ret = ebd_loadstop(sdi->conn, devc); + ret = ebd_loadtoggle(sdi->conn, devc); + } else { + /* Send new current. */ + ret = send_cfg(sdi->conn, devc); + } + } else { + if (ebd_current_is0(devc)) { + /* Nothing to do. */ + ret = SR_OK; + } else { + /* Start load. */ + ret = ebd_loadstart(sdi->conn, devc); + } + } + + g_mutex_unlock(&devc->rw_mutex); + + return ret; +} + +SR_PRIV int ebd_get_voltage_limit(const struct sr_dev_inst *sdi, float *voltage) +{ + struct dev_context *devc; + + if (!(devc = sdi->priv)) + return SR_ERR; + + g_mutex_lock(&devc->rw_mutex); + *voltage = devc->voltage_limit; + g_mutex_unlock(&devc->rw_mutex); + + return SR_OK; +} + +SR_PRIV int ebd_set_voltage_limit(const struct sr_dev_inst *sdi, float voltage) +{ + struct dev_context *devc; + int ret; + + if (!(devc = sdi->priv)) + return SR_ERR; + + g_mutex_lock(&devc->rw_mutex); + devc->voltage_limit = voltage; + + if (!devc->running) { + sr_dbg("Setting voltage limit later."); + g_mutex_unlock(&devc->rw_mutex); + return SR_OK; + } + + sr_dbg("Setting voltage limit to %fV.", voltage); + + if (devc->load_activated) { + if (ebd_current_is0(devc)) { + /* Stop load. */ + ret = ebd_loadtoggle(sdi->conn, devc); } else { /* Send new current. */ ret = send_cfg(sdi->conn, devc); diff --git a/src/hardware/zketech-ebd-usb/protocol.h b/src/hardware/zketech-ebd-usb/protocol.h index 004ce5fb..0d8ebecf 100644 --- a/src/hardware/zketech-ebd-usb/protocol.h +++ b/src/hardware/zketech-ebd-usb/protocol.h @@ -2,6 +2,7 @@ * This file is part of the libsigrok project. * * Copyright (C) 2018 Sven Bursch-Osewold + * Copyright (C) 2019 King Kévin * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -27,34 +28,34 @@ #define LOG_PREFIX "zketech-ebd-usb" -#define MSG_LEN 19 -#define MSG_CHECKSUM_POS 17 +#define MSG_MAX_LEN 19 #define MSG_FRAME_BEGIN 0xfa -#define MSG_FRAME_BEGIN_POS 0 #define MSG_FRAME_END 0xf8 -#define MSG_FRAME_END_POS 18 struct dev_context { struct sr_sw_limits limits; GMutex rw_mutex; float current_limit; + float voltage_limit; gboolean running; gboolean load_activated; }; /* Communication via serial. */ -SR_PRIV int ebd_read_chars(struct sr_serial_dev_inst *serial, int count, uint8_t *buf); +SR_PRIV int ebd_read_message(struct sr_serial_dev_inst *serial, int length, uint8_t *buf); /* Commands. */ SR_PRIV int ebd_init(struct sr_serial_dev_inst *serial, struct dev_context *devc); SR_PRIV int ebd_loadstart(struct sr_serial_dev_inst *serial, struct dev_context *devc); SR_PRIV int ebd_receive_data(int fd, int revents, void *cb_data); SR_PRIV int ebd_stop(struct sr_serial_dev_inst *serial, struct dev_context *devc); -SR_PRIV int ebd_loadstop(struct sr_serial_dev_inst *serial, struct dev_context *devc); +SR_PRIV int ebd_loadtoggle(struct sr_serial_dev_inst *serial, struct dev_context *devc); /* Configuration. */ SR_PRIV int ebd_get_current_limit(const struct sr_dev_inst *sdi, float *current); SR_PRIV int ebd_set_current_limit(const struct sr_dev_inst *sdi, float current); +SR_PRIV int ebd_get_voltage_limit(const struct sr_dev_inst *sdi, float *voltage); +SR_PRIV int ebd_set_voltage_limit(const struct sr_dev_inst *sdi, float voltage); SR_PRIV gboolean ebd_current_is0(struct dev_context *devc); #endif