From: Daniel Thompson <redacted>
Date: Thu, 19 Sep 2013 15:39:24 +0000 (+0100)
Subject: serial: Only sleep when no characters are received.
X-Git-Tag: libsigrok-0.2.2~51
X-Git-Url: https://sigrok.org/gitweb/?p=libsigrok.git;a=commitdiff_plain;h=5715e84fe3335e519148d7f6252b046598a982a8

serial: Only sleep when no characters are received.

g_usleep(XX) sleeps for *at least* XX microseconds but may sleep for
longers (on older kernels the sleep will typically be 10000us). Thus
byte receive loops containing an unconditional sleep will perform
very poorly (for example it causes the scan in agilent-dmm to timeout
prematurely).

Even on modern kernels serial_readline() has a 2ms sleep per byte which
means it will read at a maximum rate of half a character per millisecond
(~4800baud).

This is fixed by only sleeping when read() returns no data.

Signed-off-by: Daniel Thompson <redacted>
---

diff --git a/hardware/common/serial.c b/hardware/common/serial.c
index 306b889c..557022c9 100644
--- a/hardware/common/serial.c
+++ b/hardware/common/serial.c
@@ -786,7 +786,8 @@ SR_PRIV int serial_readline(struct sr_serial_dev_inst *serial, char **buf,
 		if (g_get_monotonic_time() - start > timeout_ms)
 			/* Timeout */
 			break;
-		g_usleep(2000);
+		if (len < 1)
+			g_usleep(2000);
 	}
 	if (*buflen)
 		sr_dbg("Received %d: '%s'.", *buflen, *buf);
@@ -867,7 +868,8 @@ SR_PRIV int serial_stream_detect(struct sr_serial_dev_inst *serial,
 			sr_dbg("Detection timed out after %dms.", time);
 			break;
 		}
-		g_usleep(byte_delay_us);
+		if (len < 1)
+			g_usleep(byte_delay_us);
 	}
 
 	*buflen = ibuf;