X-Git-Url: https://sigrok.org/gitweb/?p=libsigrok.git;a=blobdiff_plain;f=src%2Fhardware%2Fscpi-pps%2Fprofiles.c;h=45feb72f2d8fce6cf5e2679718c9dc01a290a2a4;hp=cc5c0ce3c6bdd4dd637a68dc2a3a16c3411f8e4e;hb=5433907ed99c40e948b8350f55845dd88a5cbbe6;hpb=91ef511db2370904f8765a13e315fbddaf5ffe07 diff --git a/src/hardware/scpi-pps/profiles.c b/src/hardware/scpi-pps/profiles.c index cc5c0ce3..45feb72f 100644 --- a/src/hardware/scpi-pps/profiles.c +++ b/src/hardware/scpi-pps/profiles.c @@ -4,6 +4,7 @@ * Copyright (C) 2014 Bert Vermeulen * Copyright (C) 2015 Google, Inc. * (Written by Alexandru Gagniuc for Google, Inc.) + * Copyright (C) 2017,2019 Frank Stettner * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -19,18 +20,21 @@ * along with this program. If not, see . */ +#include #include #include #include "protocol.h" #define CH_IDX(x) (1 << x) -#define FREQ_DC_ONLY {0, 0, 0} - -static const uint32_t devopts_none[] = { }; +#define FREQ_DC_ONLY {0, 0, 0, 0, 0} +#define NO_OVP_LIMITS {0, 0, 0, 0, 0} +#define NO_OCP_LIMITS {0, 0, 0, 0, 0} /* Agilent/Keysight N5700A series */ static const uint32_t agilent_n5700a_devopts[] = { - SR_CONF_CONTINUOUS | SR_CONF_SET, + SR_CONF_CONTINUOUS, + SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, + SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, }; static const uint32_t agilent_n5700a_devopts_cg[] = { @@ -43,12 +47,16 @@ static const uint32_t agilent_n5700a_devopts_cg[] = { SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, }; +static const struct channel_group_spec agilent_n5700a_cg[] = { + { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC }, +}; + static const struct channel_spec agilent_n5767a_ch[] = { - { "1", { 0, 60, 0.0001 }, { 0, 25, 0.1 }, FREQ_DC_ONLY }, + { "1", { 0, 60, 0.0072, 3, 4 }, { 0, 25, 0.003, 3, 4 }, { 0, 1500 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, }; -static const struct channel_group_spec agilent_n5767a_cg[] = { - { "1", CH_IDX(0), PPS_OVP | PPS_OCP }, +static const struct channel_spec agilent_n5763a_ch[] = { + { "1", { 0, 12.5, 0.0015, 3, 4 }, { 0, 120, 0.0144, 3, 4 }, { 0, 1500 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, }; /* @@ -78,9 +86,58 @@ static const struct scpi_command agilent_n5700a_cmd[] = { ALL_ZERO }; +/* BK Precision 9130 series */ +static const uint32_t bk_9130_devopts[] = { + SR_CONF_CONTINUOUS, + SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, + SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, +}; + +static const uint32_t bk_9130_devopts_cg[] = { + SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, + SR_CONF_VOLTAGE | SR_CONF_GET, + SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, + SR_CONF_CURRENT | SR_CONF_GET, + SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, + SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, +}; + +static const struct channel_spec bk_9130_ch[] = { + { "1", { 0, 30, 0.001, 3, 3 }, { 0, 3, 0.001, 3, 3 }, { 0, 90, 0, 3, 3 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, + { "2", { 0, 30, 0.001, 3, 3 }, { 0, 3, 0.001, 3, 3 }, { 0, 90, 0, 3, 3 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, + { "3", { 0, 5, 0.001, 3, 3 }, { 0, 3, 0.001, 3, 3 }, { 0, 15, 0, 3, 3 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, +}; + +static const struct channel_group_spec bk_9130_cg[] = { + { "1", CH_IDX(0), PPS_OVP, SR_MQFLAG_DC }, + { "2", CH_IDX(1), PPS_OVP, SR_MQFLAG_DC }, + { "3", CH_IDX(2), PPS_OVP, SR_MQFLAG_DC }, +}; + +static const struct scpi_command bk_9130_cmd[] = { + { SCPI_CMD_REMOTE, "SYST:REMOTE" }, + { SCPI_CMD_LOCAL, "SYST:LOCAL" }, + { SCPI_CMD_SELECT_CHANNEL, ":INST:NSEL %s" }, + { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" }, + { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" }, + { SCPI_CMD_GET_MEAS_POWER, ":MEAS:POWER?" }, + { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" }, + { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" }, + { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" }, + { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" }, + { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP?" }, + { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP 1" }, + { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP 0" }, + { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT?" }, + { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT %.6f" }, + ALL_ZERO +}; + /* Chroma 61600 series AC source */ static const uint32_t chroma_61604_devopts[] = { - SR_CONF_CONTINUOUS | SR_CONF_SET, + SR_CONF_CONTINUOUS, + SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, + SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, }; static const uint32_t chroma_61604_devopts_cg[] = { @@ -95,11 +152,11 @@ static const uint32_t chroma_61604_devopts_cg[] = { }; static const struct channel_spec chroma_61604_ch[] = { - { "1", { 0, 300, 0.1 }, { 0, 16, 0.1 }, { 1.0, 1000.0, 0.01 } }, + { "1", { 0, 300, 0.1, 1, 1 }, { 0, 16, 0.1, 2, 2 }, { 0, 2000, 0, 1, 1 }, { 1.0, 1000.0, 0.01 }, NO_OVP_LIMITS, NO_OCP_LIMITS }, }; static const struct channel_group_spec chroma_61604_cg[] = { - { "1", CH_IDX(0), PPS_OVP | PPS_OCP }, + { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_AC }, }; static const struct scpi_command chroma_61604_cmd[] = { @@ -125,9 +182,10 @@ static const struct scpi_command chroma_61604_cmd[] = { }; /* Chroma 62000 series DC source */ - static const uint32_t chroma_62000_devopts[] = { - SR_CONF_CONTINUOUS | SR_CONF_SET, + SR_CONF_CONTINUOUS, + SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, + SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, }; static const uint32_t chroma_62000_devopts_cg[] = { @@ -141,7 +199,7 @@ static const uint32_t chroma_62000_devopts_cg[] = { }; static const struct channel_group_spec chroma_62000_cg[] = { - { "1", CH_IDX(0), PPS_OVP | PPS_OCP }, + { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC }, }; static const struct scpi_command chroma_62000_cmd[] = { @@ -173,30 +231,39 @@ static int chroma_62000p_probe_channels(struct sr_dev_inst *sdi, struct channel_group_spec **channel_groups, unsigned int *num_channel_groups) { - unsigned int volts, amps; + unsigned int volts, amps, watts; struct channel_spec *channel; (void)sdi; - sscanf(hw_info->model, "%*[^P]P-%u-%u", &volts, &s); - sr_dbg("Found device rated for %d V and %d A", volts, amps); + sscanf(hw_info->model, "620%uP-%u-%u", &watts, &volts, &s); + watts *= 100; + sr_dbg("Found device rated for %d V, %d A and %d W", volts, amps, watts); if (volts > 600) { sr_err("Probed max voltage of %u V is out of spec.", volts); return SR_ERR_BUG; } - if (volts > 120) { + if (amps > 120) { sr_err("Probed max current of %u A is out of spec.", amps); return SR_ERR_BUG; } + if (watts > 5000) { + sr_err("Probed max power of %u W is out of spec.", watts); + return SR_ERR_BUG; + } + channel = g_malloc0(sizeof(struct channel_spec)); channel->name = "1"; - channel->voltage[0] = channel->current[0] = 0.0; - channel->voltage[1] = (float)volts; - channel->current[1] = (float)amps; + channel->voltage[0] = channel->current[0] = channel->power[0] = 0.0; + channel->voltage[1] = volts; + channel->current[1] = amps; + channel->power[1] = watts; channel->voltage[2] = channel->current[2] = 0.01; + channel->voltage[3] = channel->voltage[4] = 3; + channel->current[3] = channel->current[4] = 4; *channels = channel; *num_channels = 1; @@ -207,10 +274,80 @@ static int chroma_62000p_probe_channels(struct sr_dev_inst *sdi, return SR_OK; } +/* Rigol DP700 series */ +static const uint32_t rigol_dp700_devopts[] = { + SR_CONF_CONTINUOUS, + SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, + SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, +}; + +static const uint32_t rigol_dp700_devopts_cg[] = { + SR_CONF_REGULATION | SR_CONF_GET, + SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET, + SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET, + SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, + SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET, + SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | SR_CONF_GET, + SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, + SR_CONF_VOLTAGE | SR_CONF_GET, + SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, + SR_CONF_CURRENT | SR_CONF_GET, + SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, + SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, +}; + +static const struct channel_spec rigol_dp711_ch[] = { + { "1", { 0, 30, 0.01, 3, 3 }, { 0, 5, 0.01, 3, 3 }, { 0, 150, 0, 3, 3 }, FREQ_DC_ONLY, { 0.01, 33, 0.01}, { 0.01, 5.5, 0.01 } }, +}; + +static const struct channel_spec rigol_dp712_ch[] = { + { "1", { 0, 50, 0.01, 3, 3 }, { 0, 3, 0.01, 3, 3 }, { 0, 150, 0, 3, 3 }, FREQ_DC_ONLY, { 0.01, 55, 0.01}, { 0.01, 3.3, 0.01 } }, +}; + +static const struct channel_group_spec rigol_dp700_cg[] = { + { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC }, +}; + +/* Same as the DP800 series, except for the missing :SYST:OTP* commands. */ +static const struct scpi_command rigol_dp700_cmd[] = { + { SCPI_CMD_REMOTE, "SYST:REMOTE" }, + { SCPI_CMD_LOCAL, "SYST:LOCAL" }, + { SCPI_CMD_BEEPER, "SYST:BEEP:STAT?" }, + { SCPI_CMD_BEEPER_ENABLE, "SYST:BEEP:STAT ON" }, + { SCPI_CMD_BEEPER_DISABLE, "SYST:BEEP:STAT OFF" }, + { SCPI_CMD_SELECT_CHANNEL, ":INST:NSEL %s" }, + { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" }, + { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" }, + { SCPI_CMD_GET_MEAS_POWER, ":MEAS:POWE?" }, + { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" }, + { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" }, + { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" }, + { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" }, + { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP?" }, + { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP ON" }, + { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP OFF" }, + { SCPI_CMD_GET_OUTPUT_REGULATION, ":OUTP:MODE?" }, + { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ENABLED, ":OUTP:OVP?" }, + { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_ENABLE, ":OUTP:OVP ON" }, + { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_DISABLE, ":OUTP:OVP OFF" }, + { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, ":OUTP:OVP:QUES?" }, + { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":OUTP:OVP:VAL?" }, + { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":OUTP:OVP:VAL %.6f" }, + { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ENABLED, ":OUTP:OCP?" }, + { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, ":OUTP:OCP:STAT ON" }, + { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, ":OUTP:OCP:STAT OFF" }, + { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, ":OUTP:OCP:QUES?" }, + { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":OUTP:OCP:VAL?" }, + { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":OUTP:OCP:VAL %.6f" }, + ALL_ZERO +}; + /* Rigol DP800 series */ static const uint32_t rigol_dp800_devopts[] = { - SR_CONF_CONTINUOUS | SR_CONF_SET, + SR_CONF_CONTINUOUS, SR_CONF_OVER_TEMPERATURE_PROTECTION | SR_CONF_GET | SR_CONF_SET, + SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, + SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, }; static const uint32_t rigol_dp800_devopts_cg[] = { @@ -229,31 +366,31 @@ static const uint32_t rigol_dp800_devopts_cg[] = { }; static const struct channel_spec rigol_dp821a_ch[] = { - { "1", { 0, 60, 0.001 }, { 0, 1, 0.0001 }, FREQ_DC_ONLY }, - { "2", { 0, 8, 0.001 }, { 0, 10, 0.001 }, FREQ_DC_ONLY }, + { "1", { 0, 60, 0.001, 3, 3 }, { 0, 1, 0.0001, 4, 4 }, { 0, 60, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, + { "2", { 0, 8, 0.001, 3, 3 }, { 0, 10, 0.001, 3, 3 }, { 0, 80, 0, 3, 3 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, }; static const struct channel_spec rigol_dp831_ch[] = { - { "1", { 0, 8, 0.001 }, { 0, 5, 0.0003 }, FREQ_DC_ONLY }, - { "2", { 0, 30, 0.001 }, { 0, 2, 0.0001 }, FREQ_DC_ONLY }, - { "3", { 0, -30, 0.001 }, { 0, 2, 0.0001 }, FREQ_DC_ONLY }, + { "1", { 0, 8, 0.001, 3, 4 }, { 0, 5, 0.0003, 3, 4 }, { 0, 40, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, + { "2", { 0, 30, 0.001, 3, 4 }, { 0, 2, 0.0001, 3, 4 }, { 0, 60, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, + { "3", { 0, -30, 0.001, 3, 4 }, { 0, 2, 0.0001, 3, 4 }, { 0, 60, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, }; static const struct channel_spec rigol_dp832_ch[] = { - { "1", { 0, 30, 0.001 }, { 0, 3, 0.001 }, FREQ_DC_ONLY }, - { "2", { 0, 30, 0.001 }, { 0, 3, 0.001 }, FREQ_DC_ONLY }, - { "3", { 0, 5, 0.001 }, { 0, 3, 0.001 }, FREQ_DC_ONLY }, + { "1", { 0, 30, 0.001, 3, 4 }, { 0, 3, 0.001, 3, 4 }, { 0, 90, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, + { "2", { 0, 30, 0.001, 3, 4 }, { 0, 3, 0.001, 3, 4 }, { 0, 90, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, + { "3", { 0, 5, 0.001, 3, 4 }, { 0, 3, 0.001, 3, 4 }, { 0, 90, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, }; static const struct channel_group_spec rigol_dp820_cg[] = { - { "1", CH_IDX(0), PPS_OVP | PPS_OCP }, - { "2", CH_IDX(1), PPS_OVP | PPS_OCP }, + { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC }, + { "2", CH_IDX(1), PPS_OVP | PPS_OCP, SR_MQFLAG_DC }, }; static const struct channel_group_spec rigol_dp830_cg[] = { - { "1", CH_IDX(0), PPS_OVP | PPS_OCP }, - { "2", CH_IDX(1), PPS_OVP | PPS_OCP }, - { "3", CH_IDX(2), PPS_OVP | PPS_OCP }, + { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC }, + { "2", CH_IDX(1), PPS_OVP | PPS_OCP, SR_MQFLAG_DC }, + { "3", CH_IDX(2), PPS_OVP | PPS_OCP, SR_MQFLAG_DC }, }; static const struct scpi_command rigol_dp800_cmd[] = { @@ -292,25 +429,220 @@ static const struct scpi_command rigol_dp800_cmd[] = { ALL_ZERO }; -/* HP 663xx series */ -static const uint32_t hp_6632b_devopts[] = { - SR_CONF_CONTINUOUS | SR_CONF_SET, +/* HP 663xA series */ +static const uint32_t hp_6630a_devopts[] = { + SR_CONF_CONTINUOUS, + SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, + SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, +}; + +static const uint32_t hp_6630a_devopts_cg[] = { + SR_CONF_ENABLED | SR_CONF_SET, + SR_CONF_VOLTAGE | SR_CONF_GET, + SR_CONF_CURRENT | SR_CONF_GET, + SR_CONF_VOLTAGE_TARGET | SR_CONF_SET | SR_CONF_LIST, + SR_CONF_CURRENT_LIMIT | SR_CONF_SET | SR_CONF_LIST, + SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET, + SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_SET | SR_CONF_LIST, + SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_SET, + SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | SR_CONF_GET, + SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE | SR_CONF_GET, + SR_CONF_REGULATION | SR_CONF_GET, +}; + +static const struct channel_spec hp_6632a_ch[] = { + { "1", { 0, 20.475, 0.005, 3, 4 }, { 0, 5.1188, 0.00125, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY, { 0, 22, 0.1 }, NO_OCP_LIMITS }, +}; + +static const struct channel_spec hp_6633a_ch[] = { + { "1", { 0, 51.188, 0.0125, 3, 4 }, { 0, 2.0475, 0.0005, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY, { 0, 55, 0.25 }, NO_OCP_LIMITS }, +}; + +static const struct channel_spec hp_6634a_ch[] = { + { "1", { 0, 102.38, 0.025, 3, 4 }, { 0, 1.0238, 0.00025, 4, 5 }, { 0, 104.81664 }, FREQ_DC_ONLY, { 0, 110, 0.5 }, NO_OCP_LIMITS }, +}; + +static const struct channel_group_spec hp_6630a_cg[] = { + { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC }, +}; + +static const struct scpi_command hp_6630a_cmd[] = { + { SCPI_CMD_SET_OUTPUT_ENABLE, "OUT 1" }, + { SCPI_CMD_SET_OUTPUT_DISABLE, "OUT 0" }, + { SCPI_CMD_GET_MEAS_VOLTAGE, "VOUT?" }, + { SCPI_CMD_GET_MEAS_CURRENT, "IOUT?" }, + { SCPI_CMD_SET_VOLTAGE_TARGET, "VSET %.4f" }, + { SCPI_CMD_SET_CURRENT_LIMIT, "ISET %.4f" }, + { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, "STS?" }, + { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "OVSET %.4f" }, + { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, "OCP 1" }, + { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, "OCP 0" }, + { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, "STS?" }, + { SCPI_CMD_GET_OVER_TEMPERATURE_PROTECTION_ACTIVE, "STS?" }, + { SCPI_CMD_GET_OUTPUT_REGULATION, "STS?" }, + ALL_ZERO +}; + +static int hp_6630a_init_acquisition(const struct sr_dev_inst *sdi) +{ + struct sr_scpi_dev_inst *scpi; + + scpi = sdi->conn; + + /* + * Monitor CV (1), CC+ (2), UR (4), OVP (8), OTP (16), OCP (64) and + * CC- (256) bits of the Status Register for the FAULT? query. + */ + return sr_scpi_send(scpi, "UNMASK 607"); +} + +static int hp_6630a_update_status(const struct sr_dev_inst *sdi) +{ + struct sr_scpi_dev_inst *scpi; + int ret; + int fault; + gboolean cv, cc_pos, unreg, cc_neg; + gboolean regulation_changed; + char *regulation; + + scpi = sdi->conn; + + /* + * Use the FAULT register (only 0->1 transitions), this way multiple set + * regulation bits in the STS/ASTS registers are ignored. In rare cases + * we will miss some changes (1->0 transitions, e.g. no regulation at all), + * but SPS/ASPS doesn't work either, unless all states are stored and + * compared to the states in STS/ASTS. + * TODO: Use SPoll or SRQ when SCPI over GPIB is used. + */ + ret = sr_scpi_get_int(scpi, "FAULT?", &fault); + if (ret != SR_OK) + return ret; + + /* OVP */ + if (fault & (1 << 3)) + sr_session_send_meta(sdi, SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE, + g_variant_new_boolean(fault & (1 << 3))); + + /* OCP */ + if (fault & (1 << 6)) + sr_session_send_meta(sdi, SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE, + g_variant_new_boolean(fault & (1 << 6))); + + /* OTP */ + if (fault & (1 << 4)) + sr_session_send_meta(sdi, SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE, + g_variant_new_boolean(fault & (1 << 4))); + + /* CV */ + cv = (fault & (1 << 0)); + regulation_changed = (fault & (1 << 0)); + /* CC+ */ + cc_pos = (fault & (1 << 1)); + regulation_changed = (fault & (1 << 1)) | regulation_changed; + /* UNREG */ + unreg = (fault & (1 << 2)); + regulation_changed = (fault & (1 << 2)) | regulation_changed; + /* CC- */ + cc_neg = (fault & (1 << 9)); + regulation_changed = (fault & (1 << 9)) | regulation_changed; + + if (regulation_changed) { + if (cv && !cc_pos && !cc_neg && !unreg) + regulation = "CV"; + else if (cc_pos && !cv && !cc_neg && !unreg) + regulation = "CC"; + else if (cc_neg && !cv && !cc_pos && !unreg) + regulation = "CC-"; + else if (unreg && !cv && !cc_pos && !cc_neg) + regulation = "UR"; + else if (!cv && !cc_pos && !cc_neg && !unreg) + regulation = ""; + else { + sr_dbg("Undefined regulation for HP 66xxA " + "(CV=%i, CC+=%i, CC-=%i, UR=%i).", + cv, cc_pos, cc_neg, unreg); + return FALSE; + } + sr_session_send_meta(sdi, SR_CONF_REGULATION, + g_variant_new_string(regulation)); + } + + return SR_OK; +} + +/* HP 663xB series */ +static const uint32_t hp_6630b_devopts[] = { + SR_CONF_CONTINUOUS, + SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, + SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, +}; + +static const uint32_t hp_6630b_devopts_cg[] = { SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, SR_CONF_VOLTAGE | SR_CONF_GET, SR_CONF_CURRENT | SR_CONF_GET, SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, + SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET, + SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, + SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET, + SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | SR_CONF_GET, + SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE | SR_CONF_GET, + SR_CONF_REGULATION | SR_CONF_GET, +}; + +static const struct channel_spec hp_6611c_ch[] = { + { "1", { 0, 8.19, 0.002, 3, 4 }, { 0, 5.1188, 0.00125, 4, 5 }, { 0, 41.92297 }, FREQ_DC_ONLY, { 0, 12, 0.06 }, NO_OCP_LIMITS }, +}; + +static const struct channel_spec hp_6612c_ch[] = { + { "1", { 0, 20.475, 0.005, 3, 4 }, { 0, 2.0475, 0.0005, 4, 5 }, { 0, 41.92256 }, FREQ_DC_ONLY, { 0, 22, 0.1 }, NO_OCP_LIMITS }, +}; + +static const struct channel_spec hp_6613c_ch[] = { + { "1", { 0, 51.188, 0.0125, 3, 4 }, { 0, 1.0238, 0.00025, 4, 5 }, { 0, 52.40627 }, FREQ_DC_ONLY, { 0, 55, 0.25 }, NO_OCP_LIMITS }, +}; + +static const struct channel_spec hp_6614c_ch[] = { + { "1", { 0, 102.38, 0.025, 3, 4 }, { 0, 0.5118, 0.000125, 4, 5 }, { 0, 52.39808 }, FREQ_DC_ONLY, { 0, 110, 0.5 }, NO_OCP_LIMITS }, +}; + +static const struct channel_spec hp_6631b_ch[] = { + { "1", { 0, 8.19, 0.002, 3, 4 }, { 0, 10.237, 0.00263, 4, 5 }, { 0, 83.84103 }, FREQ_DC_ONLY, { 0, 12, 0.06 }, NO_OCP_LIMITS }, }; static const struct channel_spec hp_6632b_ch[] = { - { "1", { 0, 20.475, 0.005 }, { 0, 5.1188, 0.00132 }, FREQ_DC_ONLY }, + { "1", { 0, 20.475, 0.005, 3, 4 }, { 0, 5.1188, 0.00132, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY, { 0, 22, 0.1 }, NO_OCP_LIMITS }, +}; + +static const struct channel_spec hp_66312a_ch[] = { + { "1", { 0, 20.475, 0.0001, 4, 5 }, { 0, 2.0475, 0.0001, 4, 5 }, { 0, 41.92256 }, FREQ_DC_ONLY, { 0, 22, 0.01 }, NO_OCP_LIMITS }, }; -static const struct channel_group_spec hp_6632b_cg[] = { - { "1", CH_IDX(0), 0 }, +static const struct channel_spec hp_66332a_ch[] = { + { "1", { 0, 20.475, 0.005, 3, 4 }, { 0, 5.1188, 0.00132, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY, { 0, 22, 0.1 }, NO_OCP_LIMITS }, }; -static const struct scpi_command hp_6632b_cmd[] = { +static const struct channel_spec hp_6633b_ch[] = { + { "1", { 0, 51.188, 0.0125, 3, 4 }, { 0, 2.0475, 0.000526, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY, { 0, 55, 0.25 }, NO_OCP_LIMITS }, +}; + +static const struct channel_spec hp_6634b_ch[] = { + { "1", { 0, 102.38, 0.025, 3, 4 }, { 0, 1.0238, 0.000263, 4, 5 }, { 0, 104.81664 }, FREQ_DC_ONLY, { 0, 110, 0.5 }, NO_OCP_LIMITS }, +}; + +static const struct channel_group_spec hp_6630b_cg[] = { + { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC }, +}; + +static const struct scpi_command hp_6630b_cmd[] = { + /* + * SCPI_CMD_REMOTE and SCPI_CMD_LOCAL are not used when GPIB is used, + * otherwise the device will report (non critical) error 602. + */ + { SCPI_CMD_REMOTE, "SYST:REM" }, + { SCPI_CMD_LOCAL, "SYST:LOC" }, { SCPI_CMD_GET_OUTPUT_ENABLED, "OUTP:STAT?" }, { SCPI_CMD_SET_OUTPUT_ENABLE, "OUTP:STAT ON" }, { SCPI_CMD_SET_OUTPUT_DISABLE, "OUTP:STAT OFF" }, @@ -320,12 +652,242 @@ static const struct scpi_command hp_6632b_cmd[] = { { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" }, { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" }, { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" }, + { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ENABLED, ":CURR:PROT:STAT?" }, + { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, ":CURR:PROT:STAT 1" }, + { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, ":CURR:PROT:STAT 0" }, + { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, "STAT:QUES:COND?" }, + { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, "STAT:QUES:COND?" }, + { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":VOLT:PROT?" }, + { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":VOLT:PROT %.6f" }, + { SCPI_CMD_GET_OVER_TEMPERATURE_PROTECTION_ACTIVE, "STAT:QUES:COND?" }, + { SCPI_CMD_GET_OUTPUT_REGULATION, "STAT:OPER:COND?" }, + ALL_ZERO +}; + +static int hp_6630b_init_acquisition(const struct sr_dev_inst *sdi) +{ + struct sr_scpi_dev_inst *scpi; + int ret; + + scpi = sdi->conn; + + /* + * Monitor CV (256), CC+ (1024) and CC- (2048) bits of the + * Operational Status Register. + * Use both positive and negative transitions of the status bits. + */ + ret = sr_scpi_send(scpi, "STAT:OPER:PTR 3328;NTR 3328;ENAB 3328"); + if (ret != SR_OK) + return ret; + + /* + * Monitor OVP (1), OCP (2), OTP (16) and Unreg (1024) bits of the + * Questionable Status Register. + * Use both positive and negative transitions of the status bits. + */ + ret = sr_scpi_send(scpi, "STAT:QUES:PTR 1043;NTR 1043;ENAB 1043"); + if (ret != SR_OK) + return ret; + + /* + * Service Request Enable Register set for Operational Status Register + * bits (128) and Questionable Status Register bits (8). + * This masks the Status Register generating a SRQ/RQS. Not implemented yet! + */ + /* + ret = sr_scpi_send(scpi, "*SRE 136"); + if (ret != SR_OK) + return ret; + */ + + return SR_OK; +} + +static int hp_6630b_update_status(const struct sr_dev_inst *sdi) +{ + struct sr_scpi_dev_inst *scpi; + int ret; + int stb; + int ques_even, ques_cond; + int oper_even, oper_cond; + gboolean output_enabled; + gboolean unreg, cv, cc_pos, cc_neg; + gboolean regulation_changed; + char *regulation; + + scpi = sdi->conn; + + unreg = FALSE; + cv = FALSE; + cc_pos = FALSE; + cc_neg = FALSE; + regulation_changed = FALSE; + + /* + * Use SPoll when SCPI uses GPIB as transport layer. + * SPoll is approx. twice as fast as a normal GPIB write + read would be! + */ +#ifdef HAVE_LIBGPIB + char spoll_buf; + + if (scpi->transport == SCPI_TRANSPORT_LIBGPIB) { + ret = sr_scpi_gpib_spoll(scpi, &spoll_buf); + if (ret != SR_OK) + return ret; + stb = (uint8_t)spoll_buf; + } + else { +#endif + ret = sr_scpi_get_int(scpi, "*STB?", &stb); + if (ret != SR_OK) + return ret; +#ifdef HAVE_LIBGPIB + } +#endif + + /* Questionable status summary bit */ + if (stb & (1 << 3)) { + /* Read the event register to clear it! */ + ret = sr_scpi_get_int(scpi, "STAT:QUES:EVEN?", &ques_even); + if (ret != SR_OK) + return ret; + /* Now get the values. */ + ret = sr_scpi_get_int(scpi, "STAT:QUES:COND?", &ques_cond); + if (ret != SR_OK) + return ret; + + /* OVP */ + if (ques_even & (1 << 0)) + sr_session_send_meta(sdi, SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE, + g_variant_new_boolean(ques_cond & (1 << 0))); + + /* OCP */ + if (ques_even & (1 << 1)) + sr_session_send_meta(sdi, SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE, + g_variant_new_boolean(ques_cond & (1 << 1))); + + /* OTP */ + if (ques_even & (1 << 4)) + sr_session_send_meta(sdi, SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE, + g_variant_new_boolean(ques_cond & (1 << 4))); + + /* UNREG */ + unreg = (ques_cond & (1 << 10)); + regulation_changed = (ques_even & (1 << 10)) | regulation_changed; + + /* + * Check if output state has changed, due to one of the + * questionable states changed. + * NOTE: The output state is sent even if it hasn't changed, + * but that only happens rarely. + */ + ret = sr_scpi_get_bool(scpi, "OUTP:STAT?", &output_enabled); + if (ret != SR_OK) + return ret; + sr_session_send_meta(sdi, SR_CONF_ENABLED, + g_variant_new_boolean(output_enabled)); + } + + /* Operation status summary bit */ + if (stb & (1 << 7)) { + /* Read the event register to clear it! */ + ret = sr_scpi_get_int(scpi, "STAT:OPER:EVEN?", &oper_even); + if (ret != SR_OK) + return ret; + /* Now get the values. */ + ret = sr_scpi_get_int(scpi, "STAT:OPER:COND?", &oper_cond); + if (ret != SR_OK) + return ret; + + /* CV */ + cv = (oper_cond & (1 << 8)); + regulation_changed = (oper_even & (1 << 8)) | regulation_changed; + /* CC+ */ + cc_pos = (oper_cond & (1 << 10)); + regulation_changed = (oper_even & (1 << 10)) | regulation_changed; + /* CC- */ + cc_neg = (oper_cond & (1 << 11)); + regulation_changed = (oper_even & (1 << 11)) | regulation_changed; + } + + if (regulation_changed) { + if (cv && !cc_pos && !cc_neg && !unreg) + regulation = "CV"; + else if (cc_pos && !cv && !cc_neg && !unreg) + regulation = "CC"; + else if (cc_neg && !cv && !cc_pos && !unreg) + regulation = "CC-"; + else if (unreg && !cv && !cc_pos && !cc_neg) + regulation = "UR"; + else if (!cv && !cc_pos && !cc_neg && !unreg) + /* This happens in case of OCP active. */ + regulation = ""; + else { + /* This happens from time to time (CV and CC+ active). */ + sr_dbg("Undefined regulation for HP 66xxB " + "(CV=%i, CC+=%i, CC-=%i, UR=%i).", + cv, cc_pos, cc_neg, unreg); + return FALSE; + } + sr_session_send_meta(sdi, SR_CONF_REGULATION, + g_variant_new_string(regulation)); + } + + return SR_OK; +} + +/* Owon P4000 series */ +static const uint32_t owon_p4000_devopts[] = { + SR_CONF_CONTINUOUS, + SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, + SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET +}; + +static const uint32_t owon_p4000_devopts_cg[] = { + SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, + SR_CONF_VOLTAGE | SR_CONF_GET, + SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, + SR_CONF_CURRENT | SR_CONF_GET, + SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, + SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, + SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, +}; + +static const struct channel_spec owon_p4603_ch[] = { + { "1", { 0.01, 60, 0.001, 3, 3 }, { 0.001, 3, 0.001, 3, 3 }, { 0, 180, 0, 3, 3 }, FREQ_DC_ONLY, { 0.01, 61, 0.001}, { 0.001, 3.1, 0.001} }, +}; + +static const struct channel_spec owon_p4305_ch[] = { + { "1", { 0.01, 30, 0.001, 3, 3 }, { 0.001, 5, 0.001, 3, 3 }, { 0, 180, 0, 3, 3 }, FREQ_DC_ONLY, { 0.01, 31, 0.001}, { 0.001, 3.1, 0.001} }, +}; + +static const struct channel_group_spec owon_p4000_cg[] = { + { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC }, +}; + +static const struct scpi_command owon_p4000_cmd[] = { + { SCPI_CMD_GET_MEAS_VOLTAGE, "MEAS:VOLT?" }, + { SCPI_CMD_GET_MEAS_CURRENT, "MEAS:CURR?" }, + { SCPI_CMD_GET_MEAS_POWER, "MEAS:POW?" }, + { SCPI_CMD_GET_VOLTAGE_TARGET, "VOLT?" }, + { SCPI_CMD_SET_VOLTAGE_TARGET, "VOLT %.6f" }, + { SCPI_CMD_GET_CURRENT_LIMIT, "CURR?" }, + { SCPI_CMD_SET_CURRENT_LIMIT, "CURR %.6f" }, + { SCPI_CMD_GET_OUTPUT_ENABLED, "OUTP?" }, + { SCPI_CMD_SET_OUTPUT_ENABLE, "OUTP 1" }, + { SCPI_CMD_SET_OUTPUT_DISABLE, "OUTP 0" }, + { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:LIM?" }, + { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:LIM %.6f" }, + { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, "CURR:LIM?" }, + { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, "CURR:LIM %.6f" }, ALL_ZERO }; /* Philips/Fluke PM2800 series */ static const uint32_t philips_pm2800_devopts[] = { - SR_CONF_CONTINUOUS | SR_CONF_SET, + SR_CONF_CONTINUOUS, + SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, + SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, }; static const uint32_t philips_pm2800_devopts_cg[] = { @@ -352,17 +914,18 @@ enum philips_pm2800_modules { static const struct philips_pm2800_module_spec { /* Min, max, programming resolution. */ - float voltage[3]; - float current[3]; + double voltage[5]; + double current[5]; + double power[5]; } philips_pm2800_module_specs[] = { /* Autoranging modules. */ - [PM2800_MOD_30V_10A] = { { 0, 30, 0.0075 }, { 0, 10, 0.0025 } }, - [PM2800_MOD_60V_5A] = { { 0, 60, 0.015 }, { 0, 5, 0.00125 } }, - [PM2800_MOD_60V_10A] = { { 0, 60, 0.015 }, { 0, 10, 0.0025 } }, + [PM2800_MOD_30V_10A] = { { 0, 30, 0.0075, 2, 4 }, { 0, 10, 0.0025, 2, 4 }, { 0, 60 } }, + [PM2800_MOD_60V_5A] = { { 0, 60, 0.015, 2, 3 }, { 0, 5, 0.00125, 2, 5 }, { 0, 60 } }, + [PM2800_MOD_60V_10A] = { { 0, 60, 0.015, 2, 3 }, { 0, 10, 0.0025, 2, 5 }, { 0, 120 } }, /* Linear modules. */ - [PM2800_MOD_8V_15A] = { { 0, 8, 0.002 }, { -15, 15, 0.00375 } }, - [PM2800_MOD_60V_2A] = { { 0, 60, 0.015 }, { -2, 2, 0.0005 } }, - [PM2800_MOD_120V_1A] = { { 0, 120, 0.030 }, { -1, 1, 0.00025 } }, + [PM2800_MOD_8V_15A] = { { 0, 8, 0.002, 3, 3 }, { -15, 15, 0.00375, 3, 5 }, { 0, 120 } }, + [PM2800_MOD_60V_2A] = { { 0, 60, 0.015, 2, 3 }, { -2, 2, 0.0005, 3, 4 }, { 0, 120 } }, + [PM2800_MOD_120V_1A] = { { 0, 120, 0.030, 2, 2 }, { -1, 1, 0.00025, 3, 5 }, { 0, 120 } }, }; static const struct philips_pm2800_model { @@ -434,14 +997,16 @@ static int philips_pm2800_probe_channels(struct sr_dev_inst *sdi, for (i = 0; i < num_modules; i++) { module = model->modules[i]; spec = &philips_pm2800_module_specs[module]; - sr_dbg("output %d: %.0f - %.0fV, %.0f - %.0fA", i + 1, + sr_dbg("output %d: %.0f - %.0fV, %.0f - %.0fA, %.0f - %.0fW", i + 1, spec->voltage[0], spec->voltage[1], - spec->current[0], spec->current[1]); + spec->current[0], spec->current[1], + spec->power[0], spec->power[1]); (*channels)[i].name = (char *)philips_pm2800_names[i]; - memcpy(&((*channels)[i].voltage), spec, sizeof(float) * 6); + memcpy(&((*channels)[i].voltage), spec, sizeof(double) * 15); (*channel_groups)[i].name = (char *)philips_pm2800_names[i]; (*channel_groups)[i].channel_index_mask = 1 << i; (*channel_groups)[i].features = PPS_OTP | PPS_OVP | PPS_OCP; + (*channel_groups)[i].mqflags = SR_MQFLAG_DC; } *num_channels = *num_channel_groups = num_modules; @@ -470,78 +1035,528 @@ static const struct scpi_command philips_pm2800_cmd[] = { ALL_ZERO }; +static const uint32_t rs_hmc8043_devopts[] = { + SR_CONF_CONTINUOUS, + SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, + SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, +}; + +static const uint32_t rs_hmc8043_devopts_cg[] = { + SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET, + SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET, + SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, + SR_CONF_VOLTAGE | SR_CONF_GET, + SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, + SR_CONF_CURRENT | SR_CONF_GET, + SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, + SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, +}; + +static const struct channel_spec rs_hmc8043_ch[] = { + { "1", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 3, 0.001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, + { "2", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 3, 0.001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, + { "3", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 3, 0.001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, +}; + +static const struct channel_group_spec rs_hmc8043_cg[] = { + { "1", CH_IDX(0), PPS_OVP, SR_MQFLAG_DC }, + { "2", CH_IDX(1), PPS_OVP, SR_MQFLAG_DC }, + { "3", CH_IDX(2), PPS_OVP, SR_MQFLAG_DC }, +}; + +static const struct scpi_command rs_hmc8043_cmd[] = { + { SCPI_CMD_SELECT_CHANNEL, "INST:NSEL %s" }, + { SCPI_CMD_GET_MEAS_VOLTAGE, "MEAS:VOLT?" }, + { SCPI_CMD_GET_MEAS_CURRENT, "MEAS:CURR?" }, + { SCPI_CMD_GET_VOLTAGE_TARGET, "VOLT?" }, + { SCPI_CMD_SET_VOLTAGE_TARGET, "VOLT %.6f" }, + { SCPI_CMD_GET_CURRENT_LIMIT, "CURR?" }, + { SCPI_CMD_SET_CURRENT_LIMIT, "CURR %.6f" }, + { SCPI_CMD_GET_OUTPUT_ENABLED, "OUTP?" }, + { SCPI_CMD_SET_OUTPUT_ENABLE, "OUTP ON" }, + { SCPI_CMD_SET_OUTPUT_DISABLE, "OUTP OFF" }, + { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, "VOLT:PROT:TRIP?" }, + { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:PROT:LEV?" }, + { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:PROT:LEV %.6f" }, + { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ENABLED, "VOLT:PROT:STAT?" }, + { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_ENABLE, "VOLT:PROT:STAT ON" }, + { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_DISABLE, "VOLT:PROT:STAT OFF" }, + ALL_ZERO +}; + +static const uint32_t rs_hmp4040_devopts[] = { + SR_CONF_CONTINUOUS, + SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, + SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, +}; + +static const uint32_t rs_hmp4040_devopts_cg[] = { + SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED | SR_CONF_GET, + SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET, + SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, + SR_CONF_VOLTAGE | SR_CONF_GET, + SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, + SR_CONF_CURRENT | SR_CONF_GET, + SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, + SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, + SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE | SR_CONF_GET, + SR_CONF_REGULATION | SR_CONF_GET, +}; + +static const struct channel_spec rs_hmp2020_ch[] = { + { "1", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 10.01, 0.0002, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, + { "2", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 5.01, 0.0001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, +}; + +static const struct channel_spec rs_hmp2030_ch[] = { + { "1", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 5.01, 0.0001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, + { "2", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 5.01, 0.0001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, + { "3", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 5.01, 0.0001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, +}; + +static const struct channel_spec rs_hmp4040_ch[] = { + { "1", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 10.01, 0.0002, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, + { "2", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 10.01, 0.0002, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, + { "3", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 10.01, 0.0002, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, + { "4", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 10.01, 0.0002, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, +}; + +static const struct channel_group_spec rs_hmp4040_cg[] = { + { "1", CH_IDX(0), PPS_OVP | PPS_OTP, SR_MQFLAG_DC }, + { "2", CH_IDX(1), PPS_OVP | PPS_OTP, SR_MQFLAG_DC }, + { "3", CH_IDX(2), PPS_OVP | PPS_OTP, SR_MQFLAG_DC }, + { "4", CH_IDX(3), PPS_OVP | PPS_OTP, SR_MQFLAG_DC }, +}; + +/* + * Developer's note: Currently unused device commands. Some of them + * are not in use because SCPI_CMD codes are not defined yet. + * OUTP:GEN + * VOLT? MAX, CURR? MAX + * VOLT:PROT:CLE (could set SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE) + * VOLT:PROT:MODE + * FUSE:STAT, FUSE:TRIP?, FUSE:LINK, FUSE:UNL + * ARB:... + * SYST:LOC, SYST:REM, SYST:RWL, SYST:MIX + * SYST:BEEP:IMM + */ +static const struct scpi_command rs_hmp4040_cmd[] = { + { SCPI_CMD_REMOTE, "SYST:REM" }, + { SCPI_CMD_LOCAL, "SYST:LOC" }, + { SCPI_CMD_SELECT_CHANNEL, "INST:NSEL %s" }, + { SCPI_CMD_GET_MEAS_VOLTAGE, "MEAS:VOLT?" }, + { SCPI_CMD_GET_MEAS_CURRENT, "MEAS:CURR?" }, + { SCPI_CMD_GET_VOLTAGE_TARGET, "VOLT?" }, + { SCPI_CMD_SET_VOLTAGE_TARGET, "VOLT %.6f" }, + { SCPI_CMD_GET_CURRENT_LIMIT, "CURR?" }, + { SCPI_CMD_SET_CURRENT_LIMIT, "CURR %.6f" }, + { SCPI_CMD_GET_OUTPUT_ENABLED, "OUTP?" }, + { SCPI_CMD_SET_OUTPUT_ENABLE, "OUTP ON" }, + { SCPI_CMD_SET_OUTPUT_DISABLE, "OUTP OFF" }, + { SCPI_CMD_GET_OUTPUT_REGULATION, "STAT:QUES:INST:ISUM%s:COND?" }, + { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, "VOLT:PROT:TRIP?" }, + { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:PROT:LEV?" }, + { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:PROT:LEV %.6f" }, + { SCPI_CMD_GET_OVER_TEMPERATURE_PROTECTION_ACTIVE, "STAT:QUES:INST:ISUM%s:COND?" }, + ALL_ZERO +}; + SR_PRIV const struct scpi_pps pps_profiles[] = { + /* Agilent N5763A */ + { "Agilent", "N5763A", SCPI_DIALECT_UNKNOWN, 0, + ARRAY_AND_SIZE(agilent_n5700a_devopts), + ARRAY_AND_SIZE(agilent_n5700a_devopts_cg), + ARRAY_AND_SIZE(agilent_n5763a_ch), + ARRAY_AND_SIZE(agilent_n5700a_cg), + agilent_n5700a_cmd, + .probe_channels = NULL, + .init_acquisition = NULL, + .update_status = NULL, + }, + /* Agilent N5767A */ - { "Agilent", "N5767A", 0, + { "Agilent", "N5767A", SCPI_DIALECT_UNKNOWN, 0, ARRAY_AND_SIZE(agilent_n5700a_devopts), ARRAY_AND_SIZE(agilent_n5700a_devopts_cg), ARRAY_AND_SIZE(agilent_n5767a_ch), - ARRAY_AND_SIZE(agilent_n5767a_cg), + ARRAY_AND_SIZE(agilent_n5700a_cg), agilent_n5700a_cmd, .probe_channels = NULL, + .init_acquisition = NULL, + .update_status = NULL, + }, + + /* BK Precision 9310 */ + { "BK", "^9130$", SCPI_DIALECT_UNKNOWN, 0, + ARRAY_AND_SIZE(bk_9130_devopts), + ARRAY_AND_SIZE(bk_9130_devopts_cg), + ARRAY_AND_SIZE(bk_9130_ch), + ARRAY_AND_SIZE(bk_9130_cg), + bk_9130_cmd, + .probe_channels = NULL, + .init_acquisition = NULL, + .update_status = NULL, }, + /* Chroma 61604 */ - { "Chroma", "61604", 0, + { "Chroma", "61604", SCPI_DIALECT_UNKNOWN, 0, ARRAY_AND_SIZE(chroma_61604_devopts), ARRAY_AND_SIZE(chroma_61604_devopts_cg), ARRAY_AND_SIZE(chroma_61604_ch), ARRAY_AND_SIZE(chroma_61604_cg), chroma_61604_cmd, .probe_channels = NULL, + .init_acquisition = NULL, + .update_status = NULL, }, + /* Chroma 62000 series */ - { "Chroma", "620[0-9]{2}P-[0-9]{2,3}-[0-9]{1,3}", 0, + { "Chroma", "620[0-9]{2}P-[0-9]{2,3}-[0-9]{1,3}", SCPI_DIALECT_UNKNOWN, 0, ARRAY_AND_SIZE(chroma_62000_devopts), ARRAY_AND_SIZE(chroma_62000_devopts_cg), NULL, 0, NULL, 0, chroma_62000_cmd, .probe_channels = chroma_62000p_probe_channels, + .init_acquisition = NULL, + .update_status = NULL, + }, + + /* + * This entry is for testing the HP COMP language with a HP 6632B power + * supply switched to the COMP language ("SYST:LANG COMP"). When used, + * disable the entry for the HP 6632B below! + */ + /* + { "HP", "6632B", SCPI_DIALECT_HP_COMP, 0, + ARRAY_AND_SIZE(hp_6630a_devopts), + ARRAY_AND_SIZE(hp_6630a_devopts_cg), + ARRAY_AND_SIZE(hp_6632a_ch), + ARRAY_AND_SIZE(hp_6630a_cg), + hp_6630a_cmd, + .probe_channels = NULL, + hp_6630a_init_acquisition, + hp_6630a_update_status, + }, + */ + + /* HP 6632A */ + { "HP", "6632A", SCPI_DIALECT_HP_COMP, 0, + ARRAY_AND_SIZE(hp_6630a_devopts), + ARRAY_AND_SIZE(hp_6630a_devopts_cg), + ARRAY_AND_SIZE(hp_6632a_ch), + ARRAY_AND_SIZE(hp_6630a_cg), + hp_6630a_cmd, + .probe_channels = NULL, + hp_6630a_init_acquisition, + hp_6630a_update_status, + }, + + /* HP 6633A */ + { "HP", "6633A", SCPI_DIALECT_HP_COMP, 0, + ARRAY_AND_SIZE(hp_6630a_devopts), + ARRAY_AND_SIZE(hp_6630a_devopts_cg), + ARRAY_AND_SIZE(hp_6633a_ch), + ARRAY_AND_SIZE(hp_6630a_cg), + hp_6630a_cmd, + .probe_channels = NULL, + hp_6630a_init_acquisition, + hp_6630a_update_status, + }, + + /* HP 6634A */ + { "HP", "6634A", SCPI_DIALECT_HP_COMP, 0, + ARRAY_AND_SIZE(hp_6630a_devopts), + ARRAY_AND_SIZE(hp_6630a_devopts_cg), + ARRAY_AND_SIZE(hp_6634a_ch), + ARRAY_AND_SIZE(hp_6630a_cg), + hp_6630a_cmd, + .probe_channels = NULL, + hp_6630a_init_acquisition, + hp_6630a_update_status, }, + + /* HP 6611C */ + { "HP", "6611C", SCPI_DIALECT_HP_66XXB, PPS_OTP, + ARRAY_AND_SIZE(hp_6630b_devopts), + ARRAY_AND_SIZE(hp_6630b_devopts_cg), + ARRAY_AND_SIZE(hp_6611c_ch), + ARRAY_AND_SIZE(hp_6630b_cg), + hp_6630b_cmd, + .probe_channels = NULL, + hp_6630b_init_acquisition, + hp_6630b_update_status, + }, + + /* HP 6612C */ + { "HP", "6612C", SCPI_DIALECT_HP_66XXB, PPS_OTP, + ARRAY_AND_SIZE(hp_6630b_devopts), + ARRAY_AND_SIZE(hp_6630b_devopts_cg), + ARRAY_AND_SIZE(hp_6612c_ch), + ARRAY_AND_SIZE(hp_6630b_cg), + hp_6630b_cmd, + .probe_channels = NULL, + hp_6630b_init_acquisition, + hp_6630b_update_status, + }, + + /* HP 6613C */ + { "HP", "6613C", SCPI_DIALECT_HP_66XXB, PPS_OTP, + ARRAY_AND_SIZE(hp_6630b_devopts), + ARRAY_AND_SIZE(hp_6630b_devopts_cg), + ARRAY_AND_SIZE(hp_6613c_ch), + ARRAY_AND_SIZE(hp_6630b_cg), + hp_6630b_cmd, + .probe_channels = NULL, + hp_6630b_init_acquisition, + hp_6630b_update_status, + }, + + /* HP 6614C */ + { "HP", "6614C", SCPI_DIALECT_HP_66XXB, PPS_OTP, + ARRAY_AND_SIZE(hp_6630b_devopts), + ARRAY_AND_SIZE(hp_6630b_devopts_cg), + ARRAY_AND_SIZE(hp_6614c_ch), + ARRAY_AND_SIZE(hp_6630b_cg), + hp_6630b_cmd, + .probe_channels = NULL, + hp_6630b_init_acquisition, + hp_6630b_update_status, + }, + + /* HP 6631B */ + { "HP", "6631B", SCPI_DIALECT_HP_66XXB, PPS_OTP, + ARRAY_AND_SIZE(hp_6630b_devopts), + ARRAY_AND_SIZE(hp_6630b_devopts_cg), + ARRAY_AND_SIZE(hp_6631b_ch), + ARRAY_AND_SIZE(hp_6630b_cg), + hp_6630b_cmd, + .probe_channels = NULL, + hp_6630b_init_acquisition, + hp_6630b_update_status, + }, + /* HP 6632B */ - { "HP", "6632B", 0, - ARRAY_AND_SIZE(hp_6632b_devopts), - ARRAY_AND_SIZE(devopts_none), + { "HP", "6632B", SCPI_DIALECT_HP_66XXB, PPS_OTP, + ARRAY_AND_SIZE(hp_6630b_devopts), + ARRAY_AND_SIZE(hp_6630b_devopts_cg), ARRAY_AND_SIZE(hp_6632b_ch), - ARRAY_AND_SIZE(hp_6632b_cg), - hp_6632b_cmd, + ARRAY_AND_SIZE(hp_6630b_cg), + hp_6630b_cmd, + .probe_channels = NULL, + hp_6630b_init_acquisition, + hp_6630b_update_status, + }, + + /* HP 66312A */ + { "HP", "66312A", SCPI_DIALECT_HP_66XXB, PPS_OTP, + ARRAY_AND_SIZE(hp_6630b_devopts), + ARRAY_AND_SIZE(hp_6630b_devopts_cg), + ARRAY_AND_SIZE(hp_66312a_ch), + ARRAY_AND_SIZE(hp_6630b_cg), + hp_6630b_cmd, + .probe_channels = NULL, + hp_6630b_init_acquisition, + hp_6630b_update_status, + }, + + /* HP 66332A */ + { "HP", "66332A", SCPI_DIALECT_HP_66XXB, PPS_OTP, + ARRAY_AND_SIZE(hp_6630b_devopts), + ARRAY_AND_SIZE(hp_6630b_devopts_cg), + ARRAY_AND_SIZE(hp_66332a_ch), + ARRAY_AND_SIZE(hp_6630b_cg), + hp_6630b_cmd, + .probe_channels = NULL, + hp_6630b_init_acquisition, + hp_6630b_update_status, + }, + + /* HP 6633B */ + { "HP", "6633B", SCPI_DIALECT_HP_66XXB, PPS_OTP, + ARRAY_AND_SIZE(hp_6630b_devopts), + ARRAY_AND_SIZE(hp_6630b_devopts_cg), + ARRAY_AND_SIZE(hp_6633b_ch), + ARRAY_AND_SIZE(hp_6630b_cg), + hp_6630b_cmd, + .probe_channels = NULL, + hp_6630b_init_acquisition, + hp_6630b_update_status, + }, + + /* HP 6634B */ + { "HP", "6634B", SCPI_DIALECT_HP_66XXB, PPS_OTP, + ARRAY_AND_SIZE(hp_6630b_devopts), + ARRAY_AND_SIZE(hp_6630b_devopts_cg), + ARRAY_AND_SIZE(hp_6634b_ch), + ARRAY_AND_SIZE(hp_6630b_cg), + hp_6630b_cmd, + .probe_channels = NULL, + hp_6630b_init_acquisition, + hp_6630b_update_status, + }, + + /* Rigol DP700 series */ + { "Rigol", "^DP711$", SCPI_DIALECT_UNKNOWN, 0, + ARRAY_AND_SIZE(rigol_dp700_devopts), + ARRAY_AND_SIZE(rigol_dp700_devopts_cg), + ARRAY_AND_SIZE(rigol_dp711_ch), + ARRAY_AND_SIZE(rigol_dp700_cg), + rigol_dp700_cmd, + .probe_channels = NULL, + .init_acquisition = NULL, + .update_status = NULL, + }, + { "Rigol", "^DP712$", SCPI_DIALECT_UNKNOWN, 0, + ARRAY_AND_SIZE(rigol_dp700_devopts), + ARRAY_AND_SIZE(rigol_dp700_devopts_cg), + ARRAY_AND_SIZE(rigol_dp712_ch), + ARRAY_AND_SIZE(rigol_dp700_cg), + rigol_dp700_cmd, .probe_channels = NULL, + .init_acquisition = NULL, + .update_status = NULL, }, /* Rigol DP800 series */ - { "Rigol", "^DP821A$", PPS_OTP, + { "Rigol", "^DP821A$", SCPI_DIALECT_UNKNOWN, PPS_OTP, ARRAY_AND_SIZE(rigol_dp800_devopts), ARRAY_AND_SIZE(rigol_dp800_devopts_cg), ARRAY_AND_SIZE(rigol_dp821a_ch), ARRAY_AND_SIZE(rigol_dp820_cg), rigol_dp800_cmd, .probe_channels = NULL, + .init_acquisition = NULL, + .update_status = NULL, }, - { "Rigol", "^DP831A$", PPS_OTP, + { "Rigol", "^DP831A$", SCPI_DIALECT_UNKNOWN, PPS_OTP, ARRAY_AND_SIZE(rigol_dp800_devopts), ARRAY_AND_SIZE(rigol_dp800_devopts_cg), ARRAY_AND_SIZE(rigol_dp831_ch), ARRAY_AND_SIZE(rigol_dp830_cg), rigol_dp800_cmd, .probe_channels = NULL, + .init_acquisition = NULL, + .update_status = NULL, }, - { "Rigol", "^(DP832|DP832A)$", PPS_OTP, + { "Rigol", "^(DP832|DP832A)$", SCPI_DIALECT_UNKNOWN, PPS_OTP, ARRAY_AND_SIZE(rigol_dp800_devopts), ARRAY_AND_SIZE(rigol_dp800_devopts_cg), ARRAY_AND_SIZE(rigol_dp832_ch), ARRAY_AND_SIZE(rigol_dp830_cg), rigol_dp800_cmd, .probe_channels = NULL, + .init_acquisition = NULL, + .update_status = NULL, + }, + + /* Owon P4000 series */ + { "OWON", "^P4305$", SCPI_DIALECT_UNKNOWN, 0, + ARRAY_AND_SIZE(owon_p4000_devopts), + ARRAY_AND_SIZE(owon_p4000_devopts_cg), + ARRAY_AND_SIZE(owon_p4305_ch), + ARRAY_AND_SIZE(owon_p4000_cg), + owon_p4000_cmd, + .probe_channels = NULL, + .init_acquisition = NULL, + .update_status = NULL, + }, + { "OWON", "^P4603$", SCPI_DIALECT_UNKNOWN, 0, + ARRAY_AND_SIZE(owon_p4000_devopts), + ARRAY_AND_SIZE(owon_p4000_devopts_cg), + ARRAY_AND_SIZE(owon_p4603_ch), + ARRAY_AND_SIZE(owon_p4000_cg), + owon_p4000_cmd, + .probe_channels = NULL, + .init_acquisition = NULL, + .update_status = NULL, }, /* Philips/Fluke PM2800 series */ - { "Philips", "^PM28[13][123]/[01234]{1,2}$", 0, + { "Philips", "^PM28[13][123]/[01234]{1,2}$", SCPI_DIALECT_PHILIPS, 0, ARRAY_AND_SIZE(philips_pm2800_devopts), ARRAY_AND_SIZE(philips_pm2800_devopts_cg), NULL, 0, NULL, 0, philips_pm2800_cmd, philips_pm2800_probe_channels, + .init_acquisition = NULL, + .update_status = NULL, + }, + + /* Rohde & Schwarz HMC8043 */ + { "Rohde&Schwarz", "HMC8043", SCPI_DIALECT_UNKNOWN, 0, + ARRAY_AND_SIZE(rs_hmc8043_devopts), + ARRAY_AND_SIZE(rs_hmc8043_devopts_cg), + ARRAY_AND_SIZE(rs_hmc8043_ch), + ARRAY_AND_SIZE(rs_hmc8043_cg), + rs_hmc8043_cmd, + .probe_channels = NULL, + .init_acquisition = NULL, + .update_status = NULL, + }, + + /* Hameg / Rohde&Schwarz HMP4000 series */ + /* TODO Match on regex, pass scpi_pps item to .probe_channels(). */ + { "HAMEG", "HMP4030", SCPI_DIALECT_HMP, 0, + ARRAY_AND_SIZE(rs_hmp4040_devopts), + ARRAY_AND_SIZE(rs_hmp4040_devopts_cg), + rs_hmp4040_ch, 3, + rs_hmp4040_cg, 3, + rs_hmp4040_cmd, + .probe_channels = NULL, + .init_acquisition = NULL, + .update_status = NULL, + }, + { "HAMEG", "HMP4040", SCPI_DIALECT_HMP, 0, + ARRAY_AND_SIZE(rs_hmp4040_devopts), + ARRAY_AND_SIZE(rs_hmp4040_devopts_cg), + ARRAY_AND_SIZE(rs_hmp4040_ch), + ARRAY_AND_SIZE(rs_hmp4040_cg), + rs_hmp4040_cmd, + .probe_channels = NULL, + .init_acquisition = NULL, + .update_status = NULL, + }, + { "ROHDE&SCHWARZ", "HMP2020", SCPI_DIALECT_HMP, 0, + ARRAY_AND_SIZE(rs_hmp4040_devopts), + ARRAY_AND_SIZE(rs_hmp4040_devopts_cg), + rs_hmp2020_ch, 2, + rs_hmp4040_cg, 2, + rs_hmp4040_cmd, + .probe_channels = NULL, + .init_acquisition = NULL, + .update_status = NULL, + }, + { "ROHDE&SCHWARZ", "HMP2030", SCPI_DIALECT_HMP, 0, + ARRAY_AND_SIZE(rs_hmp4040_devopts), + ARRAY_AND_SIZE(rs_hmp4040_devopts_cg), + rs_hmp2030_ch, 3, + rs_hmp4040_cg, 3, + rs_hmp4040_cmd, + .probe_channels = NULL, + .init_acquisition = NULL, + .update_status = NULL, + }, + { "ROHDE&SCHWARZ", "HMP4030", SCPI_DIALECT_HMP, 0, + ARRAY_AND_SIZE(rs_hmp4040_devopts), + ARRAY_AND_SIZE(rs_hmp4040_devopts_cg), + rs_hmp4040_ch, 3, + rs_hmp4040_cg, 3, + rs_hmp4040_cmd, + .probe_channels = NULL, + .init_acquisition = NULL, + .update_status = NULL, + }, + { "ROHDE&SCHWARZ", "HMP4040", SCPI_DIALECT_HMP, 0, + ARRAY_AND_SIZE(rs_hmp4040_devopts), + ARRAY_AND_SIZE(rs_hmp4040_devopts_cg), + ARRAY_AND_SIZE(rs_hmp4040_ch), + ARRAY_AND_SIZE(rs_hmp4040_cg), + rs_hmp4040_cmd, + .probe_channels = NULL, + .init_acquisition = NULL, + .update_status = NULL, }, };