X-Git-Url: https://sigrok.org/gitweb/?p=libsigrok.git;a=blobdiff_plain;f=src%2Fhardware%2Fkorad-kaxxxxp%2Fprotocol.h;h=46a3896273103c154eae6d481bd1cc5363797883;hp=7082b1536d4e01b17a740a4ddf3d50866c4ce663;hb=051d85f28d2e48597d10aaba85dbd8949afd8e2a;hpb=1c0e1baaaaf0314f49470fb49a4f5e6ddc0ba1a1

diff --git a/src/hardware/korad-kaxxxxp/protocol.h b/src/hardware/korad-kaxxxxp/protocol.h
index 7082b153..46a38962 100644
--- a/src/hardware/korad-kaxxxxp/protocol.h
+++ b/src/hardware/korad-kaxxxxp/protocol.h
@@ -2,7 +2,7 @@
  * This file is part of the libsigrok project.
  *
  * Copyright (C) 2015 Hannu Vuolasaho <vuokkosetae@gmail.com>
- * Copyright (C) 2018 Frank Stettner <frank-stettner@gmx.net>
+ * Copyright (C) 2018-2019 Frank Stettner <frank-stettner@gmx.net>
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -37,12 +37,21 @@ enum {
 	KORAD_KA3005P,
 	KORAD_KA3005P_0X01,
 	KORAD_KA3005P_0XBC,
+	KORAD_KA3005P_V42,
+	KORAD_KA3005P_V55,
 	KORAD_KD3005P,
 	KORAD_KD3005P_V20_NOSP,
+	KORAD_KD3005P_V21_NOSP,
+	RND_320_KD3005P,
+	RND_320_KA3005P,
 	RND_320K30PV,
+	TENMA_72_2550_V2,
 	TENMA_72_2540_V20,
 	TENMA_72_2540_V21,
+	TENMA_72_2540_V52,
+	TENMA_72_2535_V21,
 	STAMOS_SLS31_V20,
+	KORAD_KD6005P,
 	/* Support for future devices with this protocol. */
 };
 
@@ -60,9 +69,9 @@ struct korad_kaxxxxp_model {
 /* Reply targets */
 enum {
 	KAXXXXP_CURRENT,
-	KAXXXXP_CURRENT_MAX,
+	KAXXXXP_CURRENT_LIMIT,
 	KAXXXXP_VOLTAGE,
-	KAXXXXP_VOLTAGE_MAX,
+	KAXXXXP_VOLTAGE_TARGET,
 	KAXXXXP_STATUS,
 	KAXXXXP_OUTPUT,
 	KAXXXXP_BEEP,
@@ -80,9 +89,9 @@ struct dev_context {
 	GMutex rw_mutex;
 
 	float current;          /**< Last current value [A] read from device. */
-	float current_max;      /**< Output current set. */
+	float current_limit;    /**< Output current set. */
 	float voltage;          /**< Last voltage value [V] read from device. */
-	float voltage_max;      /**< Output voltage set. */
+	float voltage_target;   /**< Output voltage set. */
 	gboolean cc_mode[2];    /**< Device is in CC mode (otherwise CV). */
 
 	gboolean output_enabled; /**< Is the output enabled? */
@@ -90,14 +99,27 @@ struct dev_context {
 	gboolean ocp_enabled;    /**< Output current protection enabled. */
 	gboolean ovp_enabled;    /**< Output voltage protection enabled. */
 
+	gboolean cc_mode_1_changed;      /**< CC mode of channel 1 has changed. */
+	gboolean cc_mode_2_changed;      /**< CC mode of channel 2 has changed. */
+	gboolean output_enabled_changed; /**< Output enabled state has changed. */
+	gboolean ocp_enabled_changed;    /**< OCP enabled state has changed. */
+	gboolean ovp_enabled_changed;    /**< OVP enabled state has changed. */
+
 	int acquisition_target;  /**< What reply to expect. */
 	int program;             /**< Program to store or recall. */
+
+	float set_current_limit;     /**< New output current to set. */
+	float set_voltage_target;    /**< New output voltage to set. */
+	gboolean set_output_enabled; /**< New output enabled to set. */
+	gboolean set_beep_enabled;   /**< New enable beeper to set. */
+	gboolean set_ocp_enabled;    /**< New OCP enabled to set. */
+	gboolean set_ovp_enabled;    /**< New OVP enabled to set. */
 };
 
 SR_PRIV int korad_kaxxxxp_send_cmd(struct sr_serial_dev_inst *serial,
 					const char *cmd);
 SR_PRIV int korad_kaxxxxp_read_chars(struct sr_serial_dev_inst *serial,
-					int count, char *buf);
+					size_t count, char *buf);
 SR_PRIV int korad_kaxxxxp_set_value(struct sr_serial_dev_inst *serial,
 					int target, struct dev_context *devc);
 SR_PRIV int korad_kaxxxxp_get_value(struct sr_serial_dev_inst *serial,