X-Git-Url: https://sigrok.org/gitweb/?p=libsigrok.git;a=blobdiff_plain;f=include%2Flibsigrok%2Flibsigrok.h;h=5d3d23c9963f102bf0aac1b7127a412bf784829a;hp=bb0b4fe7666d8340b030ad6b8c8cce37b02ab0fa;hb=1a7adeac29d6331b53a2c78fc9c70429b32da0bd;hpb=43ff1110fb317fba796f942bbc73c37a95973b8b

diff --git a/include/libsigrok/libsigrok.h b/include/libsigrok/libsigrok.h
index bb0b4fe7..5d3d23c9 100644
--- a/include/libsigrok/libsigrok.h
+++ b/include/libsigrok/libsigrok.h
@@ -80,6 +80,13 @@ enum sr_error_code {
 	/* Update sr_strerror()/sr_strerror_name() (error.c) upon changes! */
 };
 
+/** Ternary return type for DMM/LCR/etc packet parser validity checks. */
+enum sr_valid_code {
+	SR_PACKET_INVALID = -1,	/**< Certainly invalid. */
+	SR_PACKET_VALID = 0,	/**< Certainly valid. */
+	SR_PACKET_NEED_RX = +1,	/**< Need more RX data. */
+};
+
 #define SR_MAX_CHANNELNAME_LEN 32
 
 /* Handy little macros */
@@ -233,6 +240,10 @@ enum sr_mq {
 	SR_MQ_MASS,
 	/** Harmonic ratio */
 	SR_MQ_HARMONIC_RATIO,
+	/** Energy. */
+	SR_MQ_ENERGY,
+	/** Electric charge. */
+	SR_MQ_ELECTRIC_CHARGE,
 
 	/* Update sr_key_info_mq[] (hwdriver.c) upon changes! */
 };
@@ -290,7 +301,7 @@ enum sr_unit {
 	SR_UNIT_VOLT_AMPERE,
 	/** Real power [W]. */
 	SR_UNIT_WATT,
-	/** Consumption [Wh]. */
+	/** Energy (consumption) in watt hour [Wh]. */
 	SR_UNIT_WATT_HOUR,
 	/** Wind speed in meters per second. */
 	SR_UNIT_METER_SECOND,
@@ -324,6 +335,12 @@ enum sr_unit {
 	SR_UNIT_TOLA,
 	/** Pieces (number of items). */
 	SR_UNIT_PIECE,
+	/** Energy in joule. */
+	SR_UNIT_JOULE,
+	/** Electric charge in coulomb. */
+	SR_UNIT_COULOMB,
+	/** Electric charge in ampere hour [Ah]. */
+	SR_UNIT_AMPERE_HOUR,
 
 	/*
 	 * Update unit_strings[] (analog.c) and fancyprint() (output/analog.c)
@@ -751,6 +768,16 @@ enum sr_configkey {
 	 */
 	SR_CONF_MODBUSADDR,
 
+	/**
+	 * User specified forced driver attachment to unknown devices.
+	 *
+	 * By design the interpretation of the string depends on the
+	 * specific driver. It typically would be either a replacement
+	 * '*IDN?' response value, or a sub-driver name. But could also
+	 * be anything else and totally arbitrary.
+	 */
+	SR_CONF_FORCE_DETECT,
+
 	/* Update sr_key_info_config[] (hwdriver.c) upon changes! */
 
 	/*--- Device (or channel group) configuration -----------------------*/
@@ -1000,6 +1027,56 @@ enum sr_configkey {
 	/** Offset of a source without strictly-defined MQ. */
 	SR_CONF_OFFSET,
 
+	/** The device supports setting a pattern for the logic trigger. */
+	SR_CONF_TRIGGER_PATTERN,
+
+	/** High resolution mode. */
+	SR_CONF_HIGH_RESOLUTION,
+
+	/** Peak detection. */
+	SR_CONF_PEAK_DETECTION,
+
+	/** Logic threshold: predefined levels (TTL, ECL, CMOS, etc). */
+	SR_CONF_LOGIC_THRESHOLD,
+
+	/** Logic threshold: custom numerical value. */
+	SR_CONF_LOGIC_THRESHOLD_CUSTOM,
+
+	/** The measurement range of a DMM or the output range of a power supply. */
+	SR_CONF_RANGE,
+
+	/** The number of digits (e.g. for a DMM). */
+	SR_CONF_DIGITS,
+
+	/** Phase of a source signal. */
+	SR_CONF_PHASE,
+
+	/** Duty cycle of a source signal. */
+	SR_CONF_DUTY_CYCLE,
+
+	/**
+	 * Current power.
+	 * @arg type: double
+	 * @arg get: get measured power
+	 */
+	SR_CONF_POWER,
+
+	/**
+	 * Power target.
+	 * @arg type: double
+	 * @arg get: get power target
+	 * @arg set: change power target
+	 */
+	SR_CONF_POWER_TARGET,
+
+	/**
+	 * Resistance target.
+	 * @arg type: double
+	 * @arg get: get resistance target
+	 * @arg set: change resistance target
+	 */
+	SR_CONF_RESISTANCE_TARGET,
+
 	/* Update sr_key_info_config[] (hwdriver.c) upon changes! */
 
 	/*--- Special stuff -------------------------------------------------*/