X-Git-Url: https://sigrok.org/gitweb/?p=libsigrok.git;a=blobdiff_plain;f=hardware%2Fcommon%2Fezusb.c;h=044b4642705458d9c91b4b0c39b5a109a38a24dc;hp=e3a442611b6254dff604549d84796d875dd326bd;hb=43cd4637285833706f8a404ca027bcf0ee75b9ae;hpb=868d8cefec0d27bc5afed4fe1e906c7b68665cf6

diff --git a/hardware/common/ezusb.c b/hardware/common/ezusb.c
index e3a44261..044b4642 100644
--- a/hardware/common/ezusb.c
+++ b/hardware/common/ezusb.c
@@ -1,7 +1,7 @@
 /*
- * This file is part of the sigrok project.
+ * This file is part of the libsigrok project.
  *
- * Copyright (C) 2010 Bert Vermeulen <bert@biot.com>
+ * Copyright (C) 2010-2012 Bert Vermeulen <bert@biot.com>
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -23,92 +23,114 @@
 
 #include <libusb.h>
 #include <glib.h>
+#include <glib/gstdio.h>
 #include <stdio.h>
 #include <errno.h>
 #include <string.h>
-#include "config.h"
+#include "libsigrok.h"
+#include "libsigrok-internal.h"
 
-int ezusb_reset(struct libusb_device_handle *hdl, int set_clear)
+#define LOG_PREFIX "ezusb"
+
+SR_PRIV int ezusb_reset(struct libusb_device_handle *hdl, int set_clear)
 {
-	int err;
+	int ret;
 	unsigned char buf[1];
 
-	g_message("setting CPU reset mode %s...", set_clear ? "on" : "off");
+	sr_info("setting CPU reset mode %s...",
+		set_clear ? "on" : "off");
 	buf[0] = set_clear ? 1 : 0;
-	err = libusb_control_transfer(hdl, LIBUSB_REQUEST_TYPE_VENDOR, 0xa0,
+	ret = libusb_control_transfer(hdl, LIBUSB_REQUEST_TYPE_VENDOR, 0xa0,
 				      0xe600, 0x0000, buf, 1, 100);
-	if (err < 0)
-		g_warning("Unable to send control request: %d", err);
+	if (ret < 0)
+		sr_err("Unable to send control request: %s.",
+				libusb_error_name(ret));
 
-	return err;
+	return ret;
 }
 
-int ezusb_install_firmware(libusb_device_handle *hdl, const char *filename)
+SR_PRIV int ezusb_install_firmware(libusb_device_handle *hdl,
+				   const char *filename)
 {
 	FILE *fw;
-	int offset, chunksize, err, result;
+	int offset, chunksize, ret, result;
 	unsigned char buf[4096];
 
-	g_message("Uploading firmware at %s", filename);
+	sr_info("Uploading firmware at %s", filename);
 	if ((fw = g_fopen(filename, "rb")) == NULL) {
-		g_warning("Unable to open firmware file %s for reading: %s",
-			  filename, strerror(errno));
-		return 1;
+		sr_err("Unable to open firmware file %s for reading: %s",
+		       filename, strerror(errno));
+		return SR_ERR;
 	}
 
-	result = offset = 0;
+	result = SR_OK;
+	offset = 0;
 	while (1) {
 		chunksize = fread(buf, 1, 4096, fw);
 		if (chunksize == 0)
 			break;
-		err = libusb_control_transfer(hdl, LIBUSB_REQUEST_TYPE_VENDOR |
+		ret = libusb_control_transfer(hdl, LIBUSB_REQUEST_TYPE_VENDOR |
 					      LIBUSB_ENDPOINT_OUT, 0xa0, offset,
 					      0x0000, buf, chunksize, 100);
-		if (err < 0) {
-			g_warning("Unable to send firmware to device: %d", err);
-			result = 1;
+		if (ret < 0) {
+			sr_err("Unable to send firmware to device: %s.",
+					libusb_error_name(ret));
+			result = SR_ERR;
 			break;
 		}
-		g_message("Uploaded %d bytes", chunksize);
+		sr_info("Uploaded %d bytes", chunksize);
 		offset += chunksize;
 	}
 	fclose(fw);
-	g_message("Firmware upload done");
+	sr_info("Firmware upload done");
 
 	return result;
 }
 
-int ezusb_upload_firmware(libusb_device *dev, int configuration,
-			  const char *filename)
+SR_PRIV int ezusb_upload_firmware(libusb_device *dev, int configuration,
+				  const char *filename)
 {
 	struct libusb_device_handle *hdl;
-	int err;
+	int ret;
+
+	sr_info("uploading firmware to device on %d.%d",
+		libusb_get_bus_number(dev), libusb_get_device_address(dev));
 
-	g_message("uploading firmware to device on %d.%d",
-		  libusb_get_bus_number(dev), libusb_get_device_address(dev));
+	if ((ret = libusb_open(dev, &hdl)) < 0) {
+		sr_err("failed to open device: %s.", libusb_error_name(ret));
+		return SR_ERR;
+	}
 
-	err = libusb_open(dev, &hdl);
-	if (err != 0) {
-		g_warning("failed to open device: %d", err);
-		return 1;
+/*
+ * The libusbx darwin backend is broken: it can report a kernel driver being
+ * active, but detaching it always returns an error.
+ */
+#if !defined(__APPLE__)
+	if (libusb_kernel_driver_active(hdl, 0) == 1) {
+		if ((ret = libusb_detach_kernel_driver(hdl, 0)) < 0) {
+			sr_err("failed to detach kernel driver: %s",
+					libusb_error_name(ret));
+			return SR_ERR;
+		}
 	}
+#endif
 
-	err = libusb_set_configuration(hdl, configuration);
-	if (err != 0) {
-		g_warning("Unable to set configuration: %d", err);
-		return 1;
+	if ((ret = libusb_set_configuration(hdl, configuration)) < 0) {
+		sr_err("Unable to set configuration: %s",
+				libusb_error_name(ret));
+		return SR_ERR;
 	}
 
 	if ((ezusb_reset(hdl, 1)) < 0)
-		return 1;
+		return SR_ERR;
 
-	if (ezusb_install_firmware(hdl, filename) != 0)
-		return 1;
+	if (ezusb_install_firmware(hdl, filename) < 0)
+		return SR_ERR;
 
 	if ((ezusb_reset(hdl, 0)) < 0)
-		return 1;
+		return SR_ERR;
 
 	libusb_close(hdl);
 
-	return 0;
+	return SR_OK;
 }