X-Git-Url: https://sigrok.org/gitweb/?p=libsigrok.git;a=blobdiff_plain;f=README.devices;h=f72b29e7e94a061e69f0fd4b9aceb8fae21d5e32;hp=a6ab698b2ea257b82fdbf557922dac61df1636ff;hb=884ae8c02167e9575c84f09c7eee427e0c7353b7;hpb=02feeb30b992a5e8a1115348d3a319731954e564

diff --git a/README.devices b/README.devices
index a6ab698b..f72b29e7 100644
--- a/README.devices
+++ b/README.devices
@@ -98,7 +98,6 @@ The following drivers/devices do not need any firmware upload:
  - atten-pps3xxx
  - baylibre-acme
  - beaglelogic
- - brymen-dmm
  - cem-dt-885x
  - center-3xx (including all subdrivers)
  - chronovu-la
@@ -409,6 +408,7 @@ a short list for convenience:
  - GW Instek VCP: See the discussion on manual driver assignment to common
    USB to UART chips with non-default USB identification.
  - MASTECH MS6514: Press the "Setup/PC-Link" button for roughly 3 seconds.
+ - Meterman 38XR: Press the "RS232" button.
  - Metrix MX56C: Press the PRINT button to have the meter send acquisition
    data via IR. Hold the PRINT button to adjust the meter's transmission
    interval.
@@ -472,6 +472,16 @@ Example:
  $ sigrok-cli --driver ols:conn=/dev/ttyACM0 ...
 
 
+JTAGulator
+----------
+
+The Grand Idea Studio JTAGulator also implements the SUMP protocol and
+thus is covered by the OLS driver. See the vendor's wiki on details how
+to enable the Logic Analyzer mode of operation.
+
+  https://github.com/grandideastudio/jtagulator/wiki/Logic-Analyzer
+
+
 Mooshimeter
 -----------