X-Git-Url: https://sigrok.org/gitweb/?p=libsigrok.git;a=blobdiff_plain;f=README.devices;h=3e9b631f75f9936708f5505e23499a47eeec0fe9;hp=97aca27838dc872eda5bbba14979c1e20445388f;hb=13f6da6755cc93d779853ac008ed9c4bcd3045fb;hpb=1f8ef363cb87ff425dec2b81f13e06bb15ed6e9c

diff --git a/README.devices b/README.devices
index 97aca278..3e9b631f 100644
--- a/README.devices
+++ b/README.devices
@@ -98,7 +98,6 @@ The following drivers/devices do not need any firmware upload:
  - atten-pps3xxx
  - baylibre-acme
  - beaglelogic
- - brymen-dmm
  - cem-dt-885x
  - center-3xx (including all subdrivers)
  - chronovu-la
@@ -212,6 +211,12 @@ or VXI communication parameters. See these examples:
  $ sigrok-cli --driver <somedriver>:conn=vxi/<ipaddr> ...
  $ sigrok-cli --driver <somedriver>:conn=usbtmc/<bus>.<addr> ...
 
+Individual device drivers _may_ implement additional semantics for the
+conn= specification, which would not apply to other drivers, yet can be
+rather useful for a given type of device.
+
+ $ sigrok-cli --driver <somedriver>:conn=sn=<serno>
+
 
 Specifying serial port parameters
 ---------------------------------
@@ -409,6 +414,7 @@ a short list for convenience:
  - GW Instek VCP: See the discussion on manual driver assignment to common
    USB to UART chips with non-default USB identification.
  - MASTECH MS6514: Press the "Setup/PC-Link" button for roughly 3 seconds.
+ - Meterman 38XR: Press the "RS232" button.
  - Metrix MX56C: Press the PRINT button to have the meter send acquisition
    data via IR. Hold the PRINT button to adjust the meter's transmission
    interval.