X-Git-Url: https://sigrok.org/gitweb/?p=libsigrok.git;a=blobdiff_plain;f=README.devices;h=226ec06ba59691b2c37a3548987d963d79ae3080;hp=3e9b631f75f9936708f5505e23499a47eeec0fe9;hb=c5dd6c4f0a5af1fc3bf0bf2f8b473af3f2f3c33f;hpb=e24ecabfaf11468d9ddeedd8f733c5e3a9dacaa5

diff --git a/README.devices b/README.devices
index 3e9b631f..226ec06b 100644
--- a/README.devices
+++ b/README.devices
@@ -32,6 +32,13 @@ Per-driver firmware requirements
 
 The following drivers/devices require a firmware upload upon connection:
 
+ - asix-omega-rtm-cli: There is no native sigrok support for ASIX OMEGA
+   devices. But the vendor's RTM CLI application can be used in streaming
+   mode, which transparently handles the device detection and firmware
+   download. The firmware ships with the vendor application. See below
+   for details how to make the vendor application available to the sigrok
+   driver.
+
  - asix-sigma: The ASIX SIGMA and SIGMA2 require various firmware files,
    depending on the settings used. These files are available from our
    'sigrok-firmware' repository/project under a license which allows us
@@ -438,6 +445,64 @@ a short list for convenience:
  - Voltcraft VC-870: Press the "REL/PC" button for roughly 1 second.
 
 
+ASIX OMEGA in RTM CLI mode
+--------------------------
+
+The asix-sigma driver can detect the Omega devices' presence, but does
+not support their protocol and emits a diagnostics message. The firmware
+image is not available for distribution, and information on the protocol
+is not available. That's why native support is in some distant future.
+Yet basic operation of Omega devices is available by using the vendor's
+command line application for real time mode (RTM CLI).
+
+The vendor application targets Windows (on x86), but also executes on
+Linux when 32bit libraries for FTDI communication are provided. The
+user manual discusses the installation. The sigrok asix-omega-rtm-cli
+driver uses the vendor provided omegartmcli.exe binary to configure the
+device for streaming, and to acquire sample data.
+
+Either make an "omegartmcli" executable available in PATH. This can be
+the vendor's executable or some wrapper around it or a symlink to it.
+Or specify the executable's location in the OMEGARTMCLI environment
+variable. The sigrok driver accepts an optional serial number (six or
+eight hex digits) to select one out of several connected devices.
+
+  (optional)
+  $ export "OMEGARTMCLI=$HOME/.wine/drive_c/progx86/ASIX/SIGMA/omegartmcli.exe"
+
+  (optional)
+  $ OMEGASN=":conn=sn=a6030123"
+
+  (example use)
+  $ sigrok-cli -d asix-omega-rtm-cli${OMEGASN} --show
+  $ sigrok-cli -d asix-omega-rtm-cli${OMEGASN} -o capture.sr --time 10s
+  $ sigrok-cli -d asix-omega-rtm-cli${OMEGASN} -o capture.sr --samples 100m
+  $ pulseview  -d asix-omega-rtm-cli${OMEGASN}
+
+The RTM mode of operation samples 16 channels at a fixed rate of 200MHz.
+Hardware triggers are not available in this mode. Glib should handle
+platform specific details of external process execution, but the driver
+was only tested on Linux so far. Acquisition start in sigrok applications
+may take some time before sample data becomes available (roughly one
+second here on a slow machine). This is an implementation detail of the
+RTM CLI approach including execution under wine.
+
+The reliability of that setup in the presence of fast changing input
+signals is yet to get determined. It's assumed that slow input signals
+are operational. It's essential that the _average_ rate of changes in
+the input signal in combination with the hardware compression are such
+that the FTDI FIFO can communicate all involved data via USB2.0 to the
+application. Intermediate bursts of rapid changes shall not be an issue
+given the Omega devices' deep memory which RTM uses for buffering.
+
+Native support for the Asix Omega devices depends on the availability of
+a protocol description and use of the protocol depends on the firmware's
+availability at the user's site. Which then would allow to capture to
+DRAM at high rates without the communication bottleneck, before the data
+gets communicated to the PC after the acquisition has completed. Compare
+the native sigrok support for Asix Sigma.
+
+
 ChronoVu LA8/LA16 USB VID/PIDs
 ------------------------------