static const uint32_t devopts[] = {
SR_CONF_CONTINUOUS,
- SR_CONF_LIMIT_SAMPLES | SR_CONF_SET,
- SR_CONF_LIMIT_MSEC | SR_CONF_SET,
+ SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
+ SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
};
static GSList *scan(struct sr_dev_driver *di, GSList *options)
struct sr_dev_inst *sdi;
struct dev_context *devc;
struct sr_serial_dev_inst *serial;
- int dropped, ret;
- size_t len;
+ int ret;
+ size_t dropped, len, packet_len;
uint8_t buf[128];
size_t ch_idx;
char ch_name[12];
if (serial_open(serial, SERIAL_RDWR) != SR_OK)
return NULL;
-
sr_info("Probing serial port %s.", conn);
+ if (dmm->after_open) {
+ ret = dmm->after_open(serial);
+ if (ret != SR_OK) {
+ sr_err("Activity after port open failed: %d.", ret);
+ return NULL;
+ }
+ }
+
devices = NULL;
- serial_flush(serial);
/* Request a packet if the DMM requires this. */
if (dmm->packet_request) {
if ((ret = dmm->packet_request(serial)) < 0) {
sr_err("Failed to request packet: %d.", ret);
- return FALSE;
+ return NULL;
}
}
* There's no way to get an ID from the multimeter. It just sends data
* periodically (or upon request), so the best we can do is check if
* the packets match the expected format.
- */
-
- /* Let's get a bit of data and see if we can find a packet. */
- len = sizeof(buf);
- ret = serial_stream_detect(serial, buf, &len, dmm->packet_size,
- dmm->packet_valid, 3000);
- if (ret != SR_OK)
- goto scan_cleanup;
-
- /*
+ *
* If we dropped more than two packets worth of data, something is
* wrong. We shouldn't quit however, since the dropped bytes might be
* just zeroes at the beginning of the stream. Those can occur as a
* combination of the nonstandard cable that ships with some devices
* and the serial port or USB to serial adapter.
*/
+ len = sizeof(buf);
+ ret = serial_stream_detect(serial, buf, &len, dmm->packet_size,
+ dmm->packet_valid, dmm->packet_valid_len, &packet_len, 3000);
+ if (ret != SR_OK)
+ goto scan_cleanup;
dropped = len - dmm->packet_size;
- if (dropped > 2 * dmm->packet_size)
- sr_warn("Had to drop too much data.");
-
+ if (dropped > 2 * packet_len)
+ sr_warn("Packet search dropped a lot of data.");
sr_info("Found device on port %s.", conn);
- sdi = g_malloc0(sizeof(struct sr_dev_inst));
+ /*
+ * Setup optional additional callbacks when sub device drivers
+ * happen to provide them. (This is a compromise to do it here,
+ * and not extend the DMM_CONN() et al set of macros.)
+ */
+ if (strcmp(dmm->di.name, "brymen-bm52x") == 0) {
+ /* Applicable to BM520s but not to BM820s. */
+ dmm->dmm_state_init = brymen_bm52x_state_init;
+ dmm->dmm_state_free = brymen_bm52x_state_free;
+ dmm->config_get = brymen_bm52x_config_get;
+ dmm->config_set = brymen_bm52x_config_set;
+ dmm->config_list = brymen_bm52x_config_list;
+ dmm->acquire_start = brymen_bm52x_acquire_start;
+ }
+ if (dmm->dmm_state_init)
+ dmm->dmm_state = dmm->dmm_state_init();
+
+ /* Setup the device instance. */
+ sdi = g_malloc0(sizeof(*sdi));
sdi->status = SR_ST_INACTIVE;
sdi->vendor = g_strdup(dmm->vendor);
sdi->model = g_strdup(dmm->device);
- devc = g_malloc0(sizeof(struct dev_context));
+ devc = g_malloc0(sizeof(*devc));
sr_sw_limits_init(&devc->limits);
sdi->inst_type = SR_INST_SERIAL;
sdi->conn = serial;
sdi->priv = devc;
+
+ /* Create (optionally device dependent) channel(s). */
dmm->channel_count = 1;
+ if (dmm->packet_parse == sr_brymen_bm52x_parse)
+ dmm->channel_count = BRYMEN_BM52X_DISPLAY_COUNT;
if (dmm->packet_parse == sr_brymen_bm86x_parse)
dmm->channel_count = BRYMEN_BM86X_DISPLAY_COUNT;
if (dmm->packet_parse == sr_eev121gw_3displays_parse) {
snprintf(ch_name, sizeof(ch_name), fmt, ch_num);
sr_channel_new(sdi, ch_idx, SR_CHANNEL_ANALOG, TRUE, ch_name);
}
+
+ /* Add found device to result set. */
devices = g_slist_append(devices, sdi);
scan_cleanup:
return std_scan_complete(di, devices);
}
-static int config_set(uint32_t key, GVariant *data,
+static int config_get(uint32_t key, GVariant **data,
const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
struct dev_context *devc;
+ struct dmm_info *dmm;
- (void)cg;
+ if (!sdi)
+ return SR_ERR_ARG;
+ devc = sdi->priv;
+ switch (key) {
+ case SR_CONF_LIMIT_SAMPLES:
+ case SR_CONF_LIMIT_FRAMES:
+ case SR_CONF_LIMIT_MSEC:
+ return sr_sw_limits_config_get(&devc->limits, key, data);
+ default:
+ dmm = (struct dmm_info *)sdi->driver;
+ if (!dmm || !dmm->config_get)
+ return SR_ERR_NA;
+ return dmm->config_get(dmm->dmm_state, key, data, sdi, cg);
+ }
+ /* UNREACH */
+}
+
+static int config_set(uint32_t key, GVariant *data,
+ const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
+{
+ struct dev_context *devc;
+ struct dmm_info *dmm;
+
+ if (!sdi)
+ return SR_ERR_ARG;
devc = sdi->priv;
+ (void)cg;
- return sr_sw_limits_config_set(&devc->limits, key, data);
+ switch (key) {
+ case SR_CONF_LIMIT_SAMPLES:
+ case SR_CONF_LIMIT_FRAMES:
+ case SR_CONF_LIMIT_MSEC:
+ return sr_sw_limits_config_set(&devc->limits, key, data);
+ default:
+ dmm = (struct dmm_info *)sdi->driver;
+ if (!dmm || !dmm->config_set)
+ return SR_ERR_NA;
+ return dmm->config_set(dmm->dmm_state, key, data, sdi, cg);
+ }
}
static int config_list(uint32_t key, GVariant **data,
const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
+ struct dmm_info *dmm;
+ int ret;
+
+ /* Use common logic for standard keys. */
+ if (!sdi)
+ return STD_CONFIG_LIST(key, data, sdi, cg, scanopts, drvopts, devopts);
+
+ /*
+ * Check for device specific config_list handler. ERR N/A from
+ * that handler is non-fatal, just falls back to common logic.
+ */
+ dmm = (struct dmm_info *)sdi->driver;
+ if (dmm && dmm->config_list) {
+ ret = dmm->config_list(dmm->dmm_state, key, data, sdi, cg);
+ if (ret != SR_ERR_NA)
+ return ret;
+ }
+
return STD_CONFIG_LIST(key, data, sdi, cg, scanopts, drvopts, devopts);
}
static int dev_acquisition_start(const struct sr_dev_inst *sdi)
{
struct dev_context *devc;
+ struct dmm_info *dmm;
+ sr_receive_data_callback cb_func;
+ void *cb_data;
+ int ret;
struct sr_serial_dev_inst *serial;
devc = sdi->priv;
sr_sw_limits_acquisition_start(&devc->limits);
std_session_send_df_header(sdi);
+ cb_func = receive_data;
+ cb_data = (void *)sdi;
+ dmm = (struct dmm_info *)sdi->driver;
+ if (dmm && dmm->acquire_start) {
+ ret = dmm->acquire_start(dmm->dmm_state, sdi,
+ &cb_func, &cb_data);
+ if (ret < 0)
+ return ret;
+ }
+
serial = sdi->conn;
serial_source_add(sdi->session, serial, G_IO_IN, 50,
- receive_data, (void *)sdi);
+ cb_func, cb_data);
return SR_OK;
}
-#define DMM_CONN(ID, CHIPSET, VENDOR, MODEL, \
+#define DMM_ENTRY(ID, CHIPSET, VENDOR, MODEL, \
CONN, SERIALCOMM, PACKETSIZE, TIMEOUT, DELAY, \
- REQUEST, VALID, PARSE, DETAILS) \
+ OPEN, REQUEST, VALID, PARSE, DETAILS, \
+ INIT_STATE, FREE_STATE, VALID_LEN, PARSE_LEN, \
+ CFG_GET, CFG_SET, CFG_LIST, ACQ_START) \
&((struct dmm_info) { \
{ \
.name = ID, \
.scan = scan, \
.dev_list = std_dev_list, \
.dev_clear = std_dev_clear, \
- .config_get = NULL, \
+ .config_get = config_get, \
.config_set = config_set, \
.config_list = config_list, \
.dev_open = std_serial_dev_open, \
.context = NULL, \
}, \
VENDOR, MODEL, CONN, SERIALCOMM, PACKETSIZE, TIMEOUT, DELAY, \
- REQUEST, 1, NULL, VALID, PARSE, DETAILS, sizeof(struct CHIPSET##_info) \
+ REQUEST, 1, NULL, VALID, PARSE, DETAILS, \
+ sizeof(struct CHIPSET##_info), \
+ NULL, INIT_STATE, FREE_STATE, \
+ OPEN, VALID_LEN, PARSE_LEN, \
+ CFG_GET, CFG_SET, CFG_LIST, ACQ_START, \
}).di
+#define DMM_CONN(ID, CHIPSET, VENDOR, MODEL, \
+ CONN, SERIALCOMM, PACKETSIZE, TIMEOUT, DELAY, \
+ REQUEST, VALID, PARSE, DETAILS) \
+ DMM_ENTRY(ID, CHIPSET, VENDOR, MODEL, \
+ CONN, SERIALCOMM, PACKETSIZE, TIMEOUT, DELAY, \
+ NULL, REQUEST, VALID, PARSE, DETAILS, \
+ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL)
+
#define DMM(ID, CHIPSET, VENDOR, MODEL, SERIALCOMM, PACKETSIZE, TIMEOUT, \
DELAY, REQUEST, VALID, PARSE, DETAILS) \
- DMM_CONN(ID, CHIPSET, VENDOR, MODEL, NULL, SERIALCOMM, PACKETSIZE, \
- TIMEOUT, DELAY, REQUEST, VALID, PARSE, DETAILS)
+ DMM_CONN(ID, CHIPSET, VENDOR, MODEL, \
+ NULL, SERIALCOMM, PACKETSIZE, TIMEOUT, DELAY, \
+ REQUEST, VALID, PARSE, DETAILS)
+
+#define DMM_LEN(ID, CHIPSET, VENDOR, MODEL, \
+ CONN, SERIALCOMM, PACKETSIZE, TIMEOUT, DELAY, \
+ INIT, FREE, OPEN, REQUEST, VALID, PARSE, DETAILS) \
+ DMM_ENTRY(ID, CHIPSET, VENDOR, MODEL, \
+ CONN, SERIALCOMM, PACKETSIZE, TIMEOUT, DELAY, \
+ OPEN, REQUEST, NULL, NULL, DETAILS, \
+ INIT, FREE, VALID, PARSE, NULL, NULL, NULL, NULL)
SR_REGISTER_DEV_DRIVER_LIST(serial_dmm_drivers,
/*
NULL
),
/* }}} */
+ /* bm52x based meters {{{ */
+ DMM_CONN(
+ "brymen-bm52x", brymen_bm52x, "Brymen", "BM52x",
+ "hid/bu86x", NULL, BRYMEN_BM52X_PACKET_SIZE, 4000, 500,
+ sr_brymen_bm52x_packet_request,
+ sr_brymen_bm52x_packet_valid, sr_brymen_bm52x_parse,
+ NULL
+ ),
+ DMM_CONN(
+ "brymen-bm82x", brymen_bm52x, "Brymen", "BM82x",
+ "hid/bu86x", NULL, BRYMEN_BM52X_PACKET_SIZE, 4000, 500,
+ sr_brymen_bm82x_packet_request,
+ sr_brymen_bm82x_packet_valid, sr_brymen_bm52x_parse,
+ NULL
+ ),
+ /* }}} */
+ /* bm85x based meters {{{ */
+ DMM_LEN(
+ "brymen-bm85x", brymen_bm85x, "Brymen", "BM85x",
+ NULL, "9600/8n1/dtr=1/rts=1",
+ BRYMEN_BM85x_PACKET_SIZE_MIN, 2000, 400,
+ NULL, NULL, /* INIT/FREE for DMM state */
+ brymen_bm85x_after_open, brymen_bm85x_packet_request,
+ brymen_bm85x_packet_valid, brymen_bm85x_parse,
+ NULL
+ ),
+ /* }}} */
/* bm86x based meters {{{ */
DMM_CONN(
"brymen-bm86x", brymen_bm86x, "Brymen", "BM86x",
),
/* }}} */
/* fs9922 based meters {{{ */
+ DMM(
+ "gwinstek-gdm-397", fs9922,
+ "GW Instek", "GDM-397", "2400/8n1/rts=0/dtr=1",
+ FS9922_PACKET_SIZE, 0, 0, NULL,
+ sr_fs9922_packet_valid, sr_fs9922_parse, NULL
+ ),
+ DMM(
+ "peaktech-2025", fs9922,
+ "PeakTech", "2025", "2400/8n1/rts=0/dtr=1",
+ FS9922_PACKET_SIZE, 0, 0, NULL,
+ sr_fs9922_packet_valid, sr_fs9922_parse, NULL
+ ),
DMM(
"sparkfun-70c", fs9922,
"SparkFun", "70C", "2400/8n1/rts=0/dtr=1",
NULL
),
/* }}} */
- /* ms2115b based meters {{{ */
+ /* meterman_38xr based meters {{{ */
DMM(
- "mastech-ms2115b", ms2115b,
- "MASTECH", "MS2115B", "1200/8n1",
- MS2115B_PACKET_SIZE, 0, 0, NULL,
- sr_ms2115b_packet_valid, sr_ms2115b_parse,
- NULL
- ),
- /* }}} */
- /* ms8250d based meters {{{ */
- DMM(
- "mastech-ms8250d", ms8250d,
- "MASTECH", "MS8250D", "2400/8n1/rts=0/dtr=1",
- MS8250D_PACKET_SIZE, 0, 0, NULL,
- sr_ms8250d_packet_valid, sr_ms8250d_parse,
+ "meterman-38xr", meterman_38xr,
+ "Meterman", "38XR", "9600/8n1/rts=0/dtr=1",
+ METERMAN_38XR_PACKET_SIZE, 0, 0, NULL,
+ meterman_38xr_packet_valid, meterman_38xr_parse,
NULL
),
/* }}} */
sr_metex14_packet_valid, sr_metex14_parse,
NULL
),
+ DMM(
+ "metex-me21", metex14,
+ "Metex", "ME-21", "2400/7n2/rts=0/dtr=1",
+ METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
+ sr_metex14_packet_valid, sr_metex14_parse,
+ NULL
+ ),
DMM(
"metex-me31", metex14,
"Metex", "ME-31", "600/7n2/rts=0/dtr=1",
NULL
),
/* }}} */
+ /* ms2115b based meters {{{ */
+ DMM(
+ "mastech-ms2115b", ms2115b,
+ "MASTECH", "MS2115B", "1200/8n1",
+ MS2115B_PACKET_SIZE, 0, 0, NULL,
+ sr_ms2115b_packet_valid, sr_ms2115b_parse,
+ NULL
+ ),
+ /* }}} */
+ /* ms8250d based meters {{{ */
+ DMM(
+ "mastech-ms8250d", ms8250d,
+ "MASTECH", "MS8250D", "2400/8n1/rts=0/dtr=1",
+ MS8250D_PACKET_SIZE, 0, 0, NULL,
+ sr_ms8250d_packet_valid, sr_ms8250d_parse,
+ NULL
+ ),
+ /* }}} */
/* rs9lcd based meters {{{ */
DMM(
"radioshack-22-812", rs9lcd,
projects / libsigrok.git / blobdiff