* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <config.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <string.h>
-#include <errno.h>
#include <glib.h>
-#include "libsigrok.h"
+#include <libsigrok/libsigrok.h>
#include "libsigrok-internal.h"
#include "protocol.h"
SR_CONF_SERIALCOMM,
};
-static const uint32_t devopts[] = {
+static const uint32_t drvopts[] = {
SR_CONF_MULTIMETER,
- SR_CONF_CONTINUOUS,
- SR_CONF_LIMIT_SAMPLES | SR_CONF_SET,
- SR_CONF_LIMIT_MSEC | SR_CONF_SET,
};
-SR_PRIV struct sr_dev_driver bbcgm_m2110_driver_info;
-SR_PRIV struct sr_dev_driver digitek_dt4000zc_driver_info;
-SR_PRIV struct sr_dev_driver tekpower_tp4000zc_driver_info;
-SR_PRIV struct sr_dev_driver metex_me31_driver_info;
-SR_PRIV struct sr_dev_driver peaktech_3410_driver_info;
-SR_PRIV struct sr_dev_driver mastech_mas345_driver_info;
-SR_PRIV struct sr_dev_driver mastech_ms8250b_driver_info;
-SR_PRIV struct sr_dev_driver va_va18b_driver_info;
-SR_PRIV struct sr_dev_driver va_va40b_driver_info;
-SR_PRIV struct sr_dev_driver metex_m3640d_driver_info;
-SR_PRIV struct sr_dev_driver metex_m4650cr_driver_info;
-SR_PRIV struct sr_dev_driver peaktech_4370_driver_info;
-SR_PRIV struct sr_dev_driver pce_pce_dm32_driver_info;
-SR_PRIV struct sr_dev_driver radioshack_22_168_driver_info;
-SR_PRIV struct sr_dev_driver radioshack_22_805_driver_info;
-SR_PRIV struct sr_dev_driver radioshack_22_812_driver_info;
-SR_PRIV struct sr_dev_driver tecpel_dmm_8061_ser_driver_info;
-SR_PRIV struct sr_dev_driver voltcraft_m3650cr_driver_info;
-SR_PRIV struct sr_dev_driver voltcraft_m3650d_driver_info;
-SR_PRIV struct sr_dev_driver voltcraft_m4650cr_driver_info;
-SR_PRIV struct sr_dev_driver voltcraft_me42_driver_info;
-SR_PRIV struct sr_dev_driver voltcraft_vc820_ser_driver_info;
-SR_PRIV struct sr_dev_driver voltcraft_vc830_ser_driver_info;
-SR_PRIV struct sr_dev_driver voltcraft_vc840_ser_driver_info;
-SR_PRIV struct sr_dev_driver voltcraft_vc920_ser_driver_info;
-SR_PRIV struct sr_dev_driver voltcraft_vc940_ser_driver_info;
-SR_PRIV struct sr_dev_driver voltcraft_vc960_ser_driver_info;
-SR_PRIV struct sr_dev_driver uni_t_ut60a_ser_driver_info;
-SR_PRIV struct sr_dev_driver uni_t_ut60e_ser_driver_info;
-SR_PRIV struct sr_dev_driver uni_t_ut60g_ser_driver_info;
-SR_PRIV struct sr_dev_driver uni_t_ut61b_ser_driver_info;
-SR_PRIV struct sr_dev_driver uni_t_ut61c_ser_driver_info;
-SR_PRIV struct sr_dev_driver uni_t_ut61d_ser_driver_info;
-SR_PRIV struct sr_dev_driver uni_t_ut61e_ser_driver_info;
-SR_PRIV struct sr_dev_driver uni_t_ut71a_ser_driver_info;
-SR_PRIV struct sr_dev_driver uni_t_ut71b_ser_driver_info;
-SR_PRIV struct sr_dev_driver uni_t_ut71c_ser_driver_info;
-SR_PRIV struct sr_dev_driver uni_t_ut71d_ser_driver_info;
-SR_PRIV struct sr_dev_driver uni_t_ut71e_ser_driver_info;
-SR_PRIV struct sr_dev_driver iso_tech_idm103n_driver_info;
-SR_PRIV struct sr_dev_driver tenma_72_7745_ser_driver_info;
-SR_PRIV struct sr_dev_driver tenma_72_7750_ser_driver_info;
-SR_PRIV struct sr_dev_driver brymen_bm25x_driver_info;
-
-SR_PRIV struct dmm_info dmms[] = {
- {
- "BBC Goertz Metrawatt", "M2110", "1200/7n2", 1200,
- BBCGM_M2110_PACKET_SIZE, 0, 0, NULL,
- sr_m2110_packet_valid, sr_m2110_parse,
- NULL,
- &bbcgm_m2110_driver_info, receive_data_BBCGM_M2110,
- },
- {
- "Digitek", "DT4000ZC", "2400/8n1/dtr=1", 2400,
- FS9721_PACKET_SIZE, 0, 0, NULL,
- sr_fs9721_packet_valid, sr_fs9721_parse,
- sr_fs9721_10_temp_c,
- &digitek_dt4000zc_driver_info, receive_data_DIGITEK_DT4000ZC,
- },
- {
- "TekPower", "TP4000ZC", "2400/8n1/dtr=1", 2400,
- FS9721_PACKET_SIZE, 0, 0, NULL,
- sr_fs9721_packet_valid, sr_fs9721_parse,
- sr_fs9721_10_temp_c,
- &tekpower_tp4000zc_driver_info, receive_data_TEKPOWER_TP4000ZC,
- },
- {
- "Metex", "ME-31", "600/7n2/rts=0/dtr=1", 600,
- METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
- sr_metex14_packet_valid, sr_metex14_parse,
- NULL,
- &metex_me31_driver_info, receive_data_METEX_ME31,
- },
- {
- "Peaktech", "3410", "600/7n2/rts=0/dtr=1", 600,
- METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
- sr_metex14_packet_valid, sr_metex14_parse,
- NULL,
- &peaktech_3410_driver_info, receive_data_PEAKTECH_3410,
- },
- {
- "MASTECH", "MAS345", "600/7n2/rts=0/dtr=1", 600,
- METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
- sr_metex14_packet_valid, sr_metex14_parse,
- NULL,
- &mastech_mas345_driver_info, receive_data_MASTECH_MAS345,
- },
- {
- "MASTECH", "MS8250B", "2400/8n1/rts=0/dtr=1",
- 2400, FS9721_PACKET_SIZE, 0, 0, NULL,
- sr_fs9721_packet_valid, sr_fs9721_parse,
- NULL,
- &mastech_ms8250b_driver_info, receive_data_MASTECH_MS8250B,
- },
- {
- "V&A", "VA18B", "2400/8n1", 2400,
- FS9721_PACKET_SIZE, 0, 0, NULL,
- sr_fs9721_packet_valid, sr_fs9721_parse,
- sr_fs9721_01_temp_c,
- &va_va18b_driver_info, receive_data_VA_VA18B,
- },
- {
- "V&A", "VA40B", "2400/8n1", 2400,
- FS9721_PACKET_SIZE, 0, 0, NULL,
- sr_fs9721_packet_valid, sr_fs9721_parse,
- sr_fs9721_max_c_min,
- &va_va40b_driver_info, receive_data_VA_VA40B,
- },
- {
- "Metex", "M-3640D", "1200/7n2/rts=0/dtr=1", 1200,
- METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
- sr_metex14_packet_valid, sr_metex14_parse,
- NULL,
- &metex_m3640d_driver_info, receive_data_METEX_M3640D,
- },
- {
- "Metex", "M-4650CR", "1200/7n2/rts=0/dtr=1", 1200,
- METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
- sr_metex14_packet_valid, sr_metex14_parse,
- NULL,
- &metex_m4650cr_driver_info, receive_data_METEX_M4650CR,
- },
- {
- "PeakTech", "4370", "1200/7n2/rts=0/dtr=1", 1200,
- METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
- sr_metex14_packet_valid, sr_metex14_parse,
- NULL,
- &peaktech_4370_driver_info, receive_data_PEAKTECH_4370,
- },
- {
- "PCE", "PCE-DM32", "2400/8n1", 2400,
- FS9721_PACKET_SIZE, 0, 0, NULL,
- sr_fs9721_packet_valid, sr_fs9721_parse,
- sr_fs9721_01_10_temp_f_c,
- &pce_pce_dm32_driver_info, receive_data_PCE_PCE_DM32,
- },
- {
- "RadioShack", "22-168", "1200/7n2/rts=0/dtr=1", 1200,
- METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
- sr_metex14_packet_valid, sr_metex14_parse,
- NULL,
- &radioshack_22_168_driver_info, receive_data_RADIOSHACK_22_168,
- },
- {
- "RadioShack", "22-805", "600/7n2/rts=0/dtr=1", 600,
- METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
- sr_metex14_packet_valid, sr_metex14_parse,
- NULL,
- &radioshack_22_805_driver_info, receive_data_RADIOSHACK_22_805,
- },
- {
- "RadioShack", "22-812", "4800/8n1/rts=0/dtr=1", 4800,
- RS9LCD_PACKET_SIZE, 0, 0, NULL,
- sr_rs9lcd_packet_valid, sr_rs9lcd_parse,
- NULL,
- &radioshack_22_812_driver_info, receive_data_RADIOSHACK_22_812,
- },
- {
- "Tecpel", "DMM-8061 (UT-D02 cable)", "2400/8n1/rts=0/dtr=1",
- 2400, FS9721_PACKET_SIZE, 0, 0, NULL,
- sr_fs9721_packet_valid, sr_fs9721_parse,
- sr_fs9721_00_temp_c,
- &tecpel_dmm_8061_ser_driver_info,
- receive_data_TECPEL_DMM_8061_SER,
- },
- {
- "Voltcraft", "M-3650CR", "1200/7n2/rts=0/dtr=1", 1200,
- METEX14_PACKET_SIZE, 150, 20, sr_metex14_packet_request,
- sr_metex14_packet_valid, sr_metex14_parse,
- NULL,
- &voltcraft_m3650cr_driver_info, receive_data_VOLTCRAFT_M3650CR,
- },
- {
- "Voltcraft", "M-3650D", "1200/7n2/rts=0/dtr=1", 1200,
- METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
- sr_metex14_packet_valid, sr_metex14_parse,
- NULL,
- &voltcraft_m3650d_driver_info, receive_data_VOLTCRAFT_M3650D,
- },
- {
- "Voltcraft", "M-4650CR", "1200/7n2/rts=0/dtr=1", 1200,
- METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
- sr_metex14_packet_valid, sr_metex14_parse,
- NULL,
- &voltcraft_m4650cr_driver_info, receive_data_VOLTCRAFT_M4650CR,
- },
- {
- "Voltcraft", "ME-42", "600/7n2/rts=0/dtr=1", 600,
- METEX14_PACKET_SIZE, 250, 60, sr_metex14_packet_request,
- sr_metex14_packet_valid, sr_metex14_parse,
- NULL,
- &voltcraft_me42_driver_info, receive_data_VOLTCRAFT_ME42,
- },
- {
- "Voltcraft", "VC-820 (UT-D02 cable)", "2400/8n1/rts=0/dtr=1",
- 2400, FS9721_PACKET_SIZE, 0, 0, NULL,
- sr_fs9721_packet_valid, sr_fs9721_parse,
- NULL,
- &voltcraft_vc820_ser_driver_info,
- receive_data_VOLTCRAFT_VC820_SER,
- },
- {
- /*
- * Note: The VC830 doesn't set the 'volt' and 'diode' bits of
- * the FS9922 protocol. Instead, it only sets the user-defined
- * bit "z1" to indicate "diode mode" and "voltage".
- */
- "Voltcraft", "VC-830 (UT-D02 cable)", "2400/8n1/rts=0/dtr=1",
- 2400, FS9922_PACKET_SIZE, 0, 0, NULL,
- sr_fs9922_packet_valid, sr_fs9922_parse,
- &sr_fs9922_z1_diode,
- &voltcraft_vc830_ser_driver_info,
- receive_data_VOLTCRAFT_VC830_SER,
- },
- {
- "Voltcraft", "VC-840 (UT-D02 cable)", "2400/8n1/rts=0/dtr=1",
- 2400, FS9721_PACKET_SIZE, 0, 0, NULL,
- sr_fs9721_packet_valid, sr_fs9721_parse,
- sr_fs9721_00_temp_c,
- &voltcraft_vc840_ser_driver_info,
- receive_data_VOLTCRAFT_VC840_SER,
- },
- {
- "Voltcraft", "VC-920 (UT-D02 cable)", "2400/7o1/rts=0/dtr=1",
- 2400, UT71X_PACKET_SIZE, 0, 0, NULL,
- sr_ut71x_packet_valid, sr_ut71x_parse, NULL,
- &voltcraft_vc920_ser_driver_info,
- receive_data_VOLTCRAFT_VC920_SER,
- },
- {
- "Voltcraft", "VC-940 (UT-D02 cable)", "2400/7o1/rts=0/dtr=1",
- 2400, UT71X_PACKET_SIZE, 0, 0, NULL,
- sr_ut71x_packet_valid, sr_ut71x_parse, NULL,
- &voltcraft_vc940_ser_driver_info,
- receive_data_VOLTCRAFT_VC940_SER,
- },
- {
- "Voltcraft", "VC-960 (UT-D02 cable)", "2400/7o1/rts=0/dtr=1",
- 2400, UT71X_PACKET_SIZE, 0, 0, NULL,
- sr_ut71x_packet_valid, sr_ut71x_parse, NULL,
- &voltcraft_vc960_ser_driver_info,
- receive_data_VOLTCRAFT_VC960_SER,
- },
- {
- "UNI-T", "UT60A (UT-D02 cable)", "2400/8n1/rts=0/dtr=1",
- 2400, FS9721_PACKET_SIZE, 0, 0, NULL,
- sr_fs9721_packet_valid, sr_fs9721_parse,
- NULL,
- &uni_t_ut60a_ser_driver_info,
- receive_data_UNI_T_UT60A_SER,
- },
- {
- "UNI-T", "UT60E (UT-D02 cable)", "2400/8n1/rts=0/dtr=1",
- 2400, FS9721_PACKET_SIZE, 0, 0, NULL,
- sr_fs9721_packet_valid, sr_fs9721_parse,
- sr_fs9721_00_temp_c,
- &uni_t_ut60e_ser_driver_info,
- receive_data_UNI_T_UT60E_SER,
- },
- {
- /* Note: ES51986 baudrate is actually 19230! */
- "UNI-T", "UT60G (UT-D02 cable)", "19200/7o1/rts=0/dtr=1",
- 19200, ES519XX_11B_PACKET_SIZE, 0, 0, NULL,
- sr_es519xx_19200_11b_packet_valid, sr_es519xx_19200_11b_parse,
- NULL,
- &uni_t_ut60g_ser_driver_info, receive_data_UNI_T_UT60G_SER,
- },
- {
- "UNI-T", "UT61B (UT-D02 cable)", "2400/8n1/rts=0/dtr=1",
- 2400, FS9922_PACKET_SIZE, 0, 0, NULL,
- sr_fs9922_packet_valid, sr_fs9922_parse, NULL,
- &uni_t_ut61b_ser_driver_info, receive_data_UNI_T_UT61B_SER,
- },
- {
- "UNI-T", "UT61C (UT-D02 cable)", "2400/8n1/rts=0/dtr=1",
- 2400, FS9922_PACKET_SIZE, 0, 0, NULL,
- sr_fs9922_packet_valid, sr_fs9922_parse, NULL,
- &uni_t_ut61c_ser_driver_info, receive_data_UNI_T_UT61C_SER,
- },
- {
- "UNI-T", "UT61D (UT-D02 cable)", "2400/8n1/rts=0/dtr=1",
- 2400, FS9922_PACKET_SIZE, 0, 0, NULL,
- sr_fs9922_packet_valid, sr_fs9922_parse, NULL,
- &uni_t_ut61d_ser_driver_info, receive_data_UNI_T_UT61D_SER,
- },
- {
- /* Note: ES51922 baudrate is actually 19230! */
- "UNI-T", "UT61E (UT-D02 cable)", "19200/7o1/rts=0/dtr=1",
- 19200, ES519XX_14B_PACKET_SIZE, 0, 0, NULL,
- sr_es519xx_19200_14b_packet_valid, sr_es519xx_19200_14b_parse,
- NULL,
- &uni_t_ut61e_ser_driver_info, receive_data_UNI_T_UT61E_SER,
- },
- {
- "UNI-T", "UT71A (UT-D02 cable)", "2400/7o1/rts=0/dtr=1",
- 2400, UT71X_PACKET_SIZE, 0, 0, NULL,
- sr_ut71x_packet_valid, sr_ut71x_parse, NULL,
- &uni_t_ut71a_ser_driver_info, receive_data_UNI_T_UT71A_SER,
- },
- {
- "UNI-T", "UT71B (UT-D02 cable)", "2400/7o1/rts=0/dtr=1",
- 2400, UT71X_PACKET_SIZE, 0, 0, NULL,
- sr_ut71x_packet_valid, sr_ut71x_parse, NULL,
- &uni_t_ut71b_ser_driver_info, receive_data_UNI_T_UT71B_SER,
- },
- {
- "UNI-T", "UT71C (UT-D02 cable)", "2400/7o1/rts=0/dtr=1",
- 2400, UT71X_PACKET_SIZE, 0, 0, NULL,
- sr_ut71x_packet_valid, sr_ut71x_parse, NULL,
- &uni_t_ut71c_ser_driver_info, receive_data_UNI_T_UT71C_SER,
- },
- {
- "UNI-T", "UT71D (UT-D02 cable)", "2400/7o1/rts=0/dtr=1",
- 2400, UT71X_PACKET_SIZE, 0, 0, NULL,
- sr_ut71x_packet_valid, sr_ut71x_parse, NULL,
- &uni_t_ut71d_ser_driver_info, receive_data_UNI_T_UT71D_SER,
- },
- {
- "UNI-T", "UT71E (UT-D02 cable)", "2400/7o1/rts=0/dtr=1",
- 2400, UT71X_PACKET_SIZE, 0, 0, NULL,
- sr_ut71x_packet_valid, sr_ut71x_parse, NULL,
- &uni_t_ut71e_ser_driver_info, receive_data_UNI_T_UT71E_SER,
- },
- {
- "ISO-TECH", "IDM103N", "2400/7o1/rts=0/dtr=1",
- 2400, ES519XX_11B_PACKET_SIZE, 0, 0, NULL,
- sr_es519xx_2400_11b_packet_valid, sr_es519xx_2400_11b_parse,
- NULL,
- &iso_tech_idm103n_driver_info, receive_data_ISO_TECH_IDM103N,
- },
- {
- "Tenma", "72-7745 (UT-D02 cable)", "2400/8n1/rts=0/dtr=1",
- 2400, FS9721_PACKET_SIZE, 0, 0, NULL,
- sr_fs9721_packet_valid, sr_fs9721_parse,
- sr_fs9721_00_temp_c,
- &tenma_72_7745_ser_driver_info, receive_data_TENMA_72_7745_SER,
- },
- {
- /* Note: ES51986 baudrate is actually 19230! */
- "Tenma", "72-7750 (UT-D02 cable)", "19200/7o1/rts=0/dtr=1",
- 19200, ES519XX_11B_PACKET_SIZE, 0, 0, NULL,
- sr_es519xx_19200_11b_packet_valid, sr_es519xx_19200_11b_parse,
- NULL,
- &tenma_72_7750_ser_driver_info, receive_data_TENMA_72_7750_SER,
- },
- {
- "Brymen", "BM25x", "9600/8n1/rts=1/dtr=1",
- 9600, BRYMEN_BM25X_PACKET_SIZE, 0, 0, NULL,
- sr_brymen_bm25x_packet_valid, sr_brymen_bm25x_parse,
- NULL,
- &brymen_bm25x_driver_info, receive_data_BRYMEN_BM25X,
- },
+static const uint32_t devopts[] = {
+ SR_CONF_CONTINUOUS,
+ SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
+ SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
};
-static int dev_clear(int dmm)
-{
- return std_dev_clear(dmms[dmm].di, NULL);
-}
-
-static int init(struct sr_context *sr_ctx, int dmm)
-{
- return std_init(sr_ctx, dmms[dmm].di, LOG_PREFIX);
-}
-
-static GSList *sdmm_scan(const char *conn, const char *serialcomm, int dmm)
+static GSList *scan(struct sr_dev_driver *di, GSList *options)
{
+ struct dmm_info *dmm;
+ struct sr_config *src;
+ GSList *l, *devices;
+ const char *conn, *serialcomm;
struct sr_dev_inst *sdi;
- struct drv_context *drvc;
struct dev_context *devc;
struct sr_serial_dev_inst *serial;
- GSList *devices;
- int dropped, ret;
- size_t len;
+ int ret;
+ size_t dropped, len, packet_len;
uint8_t buf[128];
+ size_t ch_idx;
+ char ch_name[12];
+
+ dmm = (struct dmm_info *)di;
+
+ conn = dmm->conn;
+ serialcomm = dmm->serialcomm;
+ for (l = options; l; l = l->next) {
+ src = l->data;
+ switch (src->key) {
+ case SR_CONF_CONN:
+ conn = g_variant_get_string(src->data, NULL);
+ break;
+ case SR_CONF_SERIALCOMM:
+ serialcomm = g_variant_get_string(src->data, NULL);
+ break;
+ }
+ }
+ if (!conn)
+ return NULL;
serial = sr_serial_dev_inst_new(conn, serialcomm);
if (serial_open(serial, SERIAL_RDWR) != SR_OK)
return NULL;
-
sr_info("Probing serial port %s.", conn);
- drvc = dmms[dmm].di->priv;
+ if (dmm->after_open) {
+ ret = dmm->after_open(serial);
+ if (ret != SR_OK) {
+ sr_err("Activity after port open failed: %d.", ret);
+ return NULL;
+ }
+ }
+
devices = NULL;
- serial_flush(serial);
/* Request a packet if the DMM requires this. */
- if (dmms[dmm].packet_request) {
- if ((ret = dmms[dmm].packet_request(serial)) < 0) {
+ if (dmm->packet_request) {
+ if ((ret = dmm->packet_request(serial)) < 0) {
sr_err("Failed to request packet: %d.", ret);
- return FALSE;
+ return NULL;
}
}
* There's no way to get an ID from the multimeter. It just sends data
* periodically (or upon request), so the best we can do is check if
* the packets match the expected format.
- */
-
- /* Let's get a bit of data and see if we can find a packet. */
- len = sizeof(buf);
- ret = serial_stream_detect(serial, buf, &len, dmms[dmm].packet_size,
- dmms[dmm].packet_valid, 3000,
- dmms[dmm].baudrate);
- if (ret != SR_OK)
- goto scan_cleanup;
-
- /*
+ *
* If we dropped more than two packets worth of data, something is
* wrong. We shouldn't quit however, since the dropped bytes might be
* just zeroes at the beginning of the stream. Those can occur as a
* combination of the nonstandard cable that ships with some devices
* and the serial port or USB to serial adapter.
*/
- dropped = len - dmms[dmm].packet_size;
- if (dropped > 2 * dmms[dmm].packet_size)
- sr_warn("Had to drop too much data.");
-
+ len = sizeof(buf);
+ ret = serial_stream_detect(serial, buf, &len, dmm->packet_size,
+ dmm->packet_valid, dmm->packet_valid_len, &packet_len, 3000);
+ if (ret != SR_OK)
+ goto scan_cleanup;
+ dropped = len - dmm->packet_size;
+ if (dropped > 2 * packet_len)
+ sr_warn("Packet search dropped a lot of data.");
sr_info("Found device on port %s.", conn);
- sdi = g_malloc0(sizeof(struct sr_dev_inst));
+ /*
+ * Setup optional additional callbacks when sub device drivers
+ * happen to provide them. (This is a compromise to do it here,
+ * and not extend the DMM_CONN() et al set of macros.)
+ */
+ if (strcmp(dmm->di.name, "brymen-bm52x") == 0) {
+ /* Applicable to BM520s but not to BM820s. */
+ dmm->dmm_state_init = brymen_bm52x_state_init;
+ dmm->dmm_state_free = brymen_bm52x_state_free;
+ dmm->config_get = brymen_bm52x_config_get;
+ dmm->config_set = brymen_bm52x_config_set;
+ dmm->config_list = brymen_bm52x_config_list;
+ dmm->acquire_start = brymen_bm52x_acquire_start;
+ }
+ if (dmm->dmm_state_init)
+ dmm->dmm_state = dmm->dmm_state_init();
+
+ /* Setup the device instance. */
+ sdi = g_malloc0(sizeof(*sdi));
sdi->status = SR_ST_INACTIVE;
- sdi->vendor = g_strdup(dmms[dmm].vendor);
- sdi->model = g_strdup(dmms[dmm].device);
- devc = g_malloc0(sizeof(struct dev_context));
+ sdi->vendor = g_strdup(dmm->vendor);
+ sdi->model = g_strdup(dmm->device);
+ devc = g_malloc0(sizeof(*devc));
+ sr_sw_limits_init(&devc->limits);
sdi->inst_type = SR_INST_SERIAL;
sdi->conn = serial;
sdi->priv = devc;
- sdi->driver = dmms[dmm].di;
- sr_channel_new(sdi, 0, SR_CHANNEL_ANALOG, TRUE, "P1");
- drvc->instances = g_slist_append(drvc->instances, sdi);
+
+ /* Create (optionally device dependent) channel(s). */
+ dmm->channel_count = 1;
+ if (dmm->packet_parse == sr_brymen_bm52x_parse)
+ dmm->channel_count = BRYMEN_BM52X_DISPLAY_COUNT;
+ if (dmm->packet_parse == sr_brymen_bm86x_parse)
+ dmm->channel_count = BRYMEN_BM86X_DISPLAY_COUNT;
+ if (dmm->packet_parse == sr_eev121gw_3displays_parse) {
+ dmm->channel_count = EEV121GW_DISPLAY_COUNT;
+ dmm->channel_formats = eev121gw_channel_formats;
+ }
+ if (dmm->packet_parse == sr_metex14_4packets_parse)
+ dmm->channel_count = 4;
+ if (dmm->packet_parse == sr_ms2115b_parse) {
+ dmm->channel_count = MS2115B_DISPLAY_COUNT;
+ dmm->channel_formats = ms2115b_channel_formats;
+ }
+ for (ch_idx = 0; ch_idx < dmm->channel_count; ch_idx++) {
+ size_t ch_num;
+ const char *fmt;
+ fmt = "P%zu";
+ if (dmm->channel_formats && dmm->channel_formats[ch_idx])
+ fmt = dmm->channel_formats[ch_idx];
+ ch_num = ch_idx + 1;
+ snprintf(ch_name, sizeof(ch_name), fmt, ch_num);
+ sr_channel_new(sdi, ch_idx, SR_CHANNEL_ANALOG, TRUE, ch_name);
+ }
+
+ /* Add found device to result set. */
devices = g_slist_append(devices, sdi);
scan_cleanup:
serial_close(serial);
- return devices;
+ return std_scan_complete(di, devices);
}
-static GSList *scan(GSList *options, int dmm)
+static int config_get(uint32_t key, GVariant **data,
+ const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
- struct sr_config *src;
- GSList *l, *devices;
- const char *conn, *serialcomm;
+ struct dev_context *devc;
+ struct dmm_info *dmm;
- conn = serialcomm = NULL;
- for (l = options; l; l = l->next) {
- src = l->data;
- switch (src->key) {
- case SR_CONF_CONN:
- conn = g_variant_get_string(src->data, NULL);
- break;
- case SR_CONF_SERIALCOMM:
- serialcomm = g_variant_get_string(src->data, NULL);
- break;
- }
- }
- if (!conn)
- return NULL;
+ if (!sdi)
+ return SR_ERR_ARG;
+ devc = sdi->priv;
- if (serialcomm) {
- /* Use the provided comm specs. */
- devices = sdmm_scan(conn, serialcomm, dmm);
- } else {
- /* Try the default. */
- devices = sdmm_scan(conn, dmms[dmm].conn, dmm);
+ switch (key) {
+ case SR_CONF_LIMIT_SAMPLES:
+ case SR_CONF_LIMIT_FRAMES:
+ case SR_CONF_LIMIT_MSEC:
+ return sr_sw_limits_config_get(&devc->limits, key, data);
+ default:
+ dmm = (struct dmm_info *)sdi->driver;
+ if (!dmm || !dmm->config_get)
+ return SR_ERR_NA;
+ return dmm->config_get(dmm->dmm_state, key, data, sdi, cg);
}
-
- return devices;
+ /* UNREACH */
}
-static GSList *dev_list(int dmm)
-{
- return ((struct drv_context *)(dmms[dmm].di->priv))->instances;
-}
-
-static int cleanup(int dmm)
-{
- return dev_clear(dmm);
-}
-
-static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi,
- const struct sr_channel_group *cg)
+static int config_set(uint32_t key, GVariant *data,
+ const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
struct dev_context *devc;
+ struct dmm_info *dmm;
+ if (!sdi)
+ return SR_ERR_ARG;
+ devc = sdi->priv;
(void)cg;
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
-
- if (!(devc = sdi->priv)) {
- sr_err("sdi->priv was NULL.");
- return SR_ERR_BUG;
- }
-
switch (key) {
case SR_CONF_LIMIT_SAMPLES:
- devc->limit_samples = g_variant_get_uint64(data);
- sr_dbg("Setting sample limit to %" PRIu64 ".",
- devc->limit_samples);
- break;
+ case SR_CONF_LIMIT_FRAMES:
case SR_CONF_LIMIT_MSEC:
- devc->limit_msec = g_variant_get_uint64(data);
- sr_dbg("Setting time limit to %" PRIu64 "ms.",
- devc->limit_msec);
- break;
+ return sr_sw_limits_config_set(&devc->limits, key, data);
default:
- return SR_ERR_NA;
+ dmm = (struct dmm_info *)sdi->driver;
+ if (!dmm || !dmm->config_set)
+ return SR_ERR_NA;
+ return dmm->config_set(dmm->dmm_state, key, data, sdi, cg);
}
-
- return SR_OK;
}
-static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
- const struct sr_channel_group *cg)
+static int config_list(uint32_t key, GVariant **data,
+ const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
- (void)sdi;
- (void)cg;
+ struct dmm_info *dmm;
+ int ret;
- switch (key) {
- case SR_CONF_SCAN_OPTIONS:
- *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
- scanopts, ARRAY_SIZE(scanopts), sizeof(uint32_t));
- break;
- case SR_CONF_DEVICE_OPTIONS:
- *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
- devopts, ARRAY_SIZE(devopts), sizeof(uint32_t));
- break;
- default:
- return SR_ERR_NA;
+ /* Use common logic for standard keys. */
+ if (!sdi)
+ return STD_CONFIG_LIST(key, data, sdi, cg, scanopts, drvopts, devopts);
+
+ /*
+ * Check for device specific config_list handler. ERR N/A from
+ * that handler is non-fatal, just falls back to common logic.
+ */
+ dmm = (struct dmm_info *)sdi->driver;
+ if (dmm && dmm->config_list) {
+ ret = dmm->config_list(dmm->dmm_state, key, data, sdi, cg);
+ if (ret != SR_ERR_NA)
+ return ret;
}
- return SR_OK;
+ return STD_CONFIG_LIST(key, data, sdi, cg, scanopts, drvopts, devopts);
}
-static int dev_acquisition_start(const struct sr_dev_inst *sdi,
- void *cb_data, int dmm)
+static int dev_acquisition_start(const struct sr_dev_inst *sdi)
{
struct dev_context *devc;
+ struct dmm_info *dmm;
+ sr_receive_data_callback cb_func;
+ void *cb_data;
+ int ret;
struct sr_serial_dev_inst *serial;
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
-
- if (!(devc = sdi->priv)) {
- sr_err("sdi->priv was NULL.");
- return SR_ERR_BUG;
- }
-
- devc->cb_data = cb_data;
+ devc = sdi->priv;
- /*
- * Reset the number of samples to take. If we've already collected our
- * quota, but we start a new session, and don't reset this, we'll just
- * quit without acquiring any new samples.
- */
- devc->num_samples = 0;
- devc->starttime = g_get_monotonic_time();
+ sr_sw_limits_acquisition_start(&devc->limits);
+ std_session_send_df_header(sdi);
- /* Send header packet to the session bus. */
- std_session_send_df_header(cb_data, LOG_PREFIX);
+ cb_func = receive_data;
+ cb_data = (void *)sdi;
+ dmm = (struct dmm_info *)sdi->driver;
+ if (dmm && dmm->acquire_start) {
+ ret = dmm->acquire_start(dmm->dmm_state, sdi,
+ &cb_func, &cb_data);
+ if (ret < 0)
+ return ret;
+ }
- /* Poll every 50ms, or whenever some data comes in. */
serial = sdi->conn;
serial_source_add(sdi->session, serial, G_IO_IN, 50,
- dmms[dmm].receive_data, (void *)sdi);
+ cb_func, cb_data);
return SR_OK;
}
-static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
-{
- return std_serial_dev_acquisition_stop(sdi, cb_data, std_serial_dev_close,
- sdi->conn, LOG_PREFIX);
-}
-
-/* Driver-specific API function wrappers */
-#define HW_INIT(X) \
-static int init_##X(struct sr_context *sr_ctx) { return init(sr_ctx, X); }
-#define HW_CLEANUP(X) \
-static int cleanup_##X(void) { return cleanup(X); }
-#define HW_SCAN(X) \
-static GSList *scan_##X(GSList *options) { return scan(options, X); }
-#define HW_DEV_LIST(X) \
-static GSList *dev_list_##X(void) { return dev_list(X); }
-#define HW_DEV_CLEAR(X) \
-static int dev_clear_##X(void) { return dev_clear(X); }
-#define HW_DEV_ACQUISITION_START(X) \
-static int dev_acquisition_start_##X(const struct sr_dev_inst *sdi, \
-void *cb_data) { return dev_acquisition_start(sdi, cb_data, X); }
-
-/* Driver structs and API function wrappers */
-#define DRV(ID, ID_UPPER, NAME, LONGNAME) \
-HW_INIT(ID_UPPER) \
-HW_CLEANUP(ID_UPPER) \
-HW_SCAN(ID_UPPER) \
-HW_DEV_LIST(ID_UPPER) \
-HW_DEV_CLEAR(ID_UPPER) \
-HW_DEV_ACQUISITION_START(ID_UPPER) \
-SR_PRIV struct sr_dev_driver ID##_driver_info = { \
- .name = NAME, \
- .longname = LONGNAME, \
- .api_version = 1, \
- .init = init_##ID_UPPER, \
- .cleanup = cleanup_##ID_UPPER, \
- .scan = scan_##ID_UPPER, \
- .dev_list = dev_list_##ID_UPPER, \
- .dev_clear = dev_clear_##ID_UPPER, \
- .config_get = NULL, \
- .config_set = config_set, \
- .config_list = config_list, \
- .dev_open = std_serial_dev_open, \
- .dev_close = std_serial_dev_close, \
- .dev_acquisition_start = dev_acquisition_start_##ID_UPPER, \
- .dev_acquisition_stop = dev_acquisition_stop, \
- .priv = NULL, \
-};
-
-DRV(bbcgm_m2110, BBCGM_M2110, "bbcgm-m2110", "BBC Goertz Metrawatt M2110")
-DRV(digitek_dt4000zc, DIGITEK_DT4000ZC, "digitek-dt4000zc", "Digitek DT4000ZC")
-DRV(tekpower_tp4000zc, TEKPOWER_TP4000ZC, "tekpower-tp4000zc", "TekPower TP4000ZC")
-DRV(metex_me31, METEX_ME31, "metex-me31", "Metex ME-31")
-DRV(peaktech_3410, PEAKTECH_3410, "peaktech-3410", "PeakTech 3410")
-DRV(mastech_mas345, MASTECH_MAS345, "mastech-mas345", "MASTECH MAS345")
-DRV(mastech_ms8250b, MASTECH_MS8250B, "mastech-ms8250b", "MASTECH MS8250B")
-DRV(va_va18b, VA_VA18B, "va-va18b", "V&A VA18B")
-DRV(va_va40b, VA_VA40B, "va-va40b", "V&A VA40B")
-DRV(metex_m3640d, METEX_M3640D, "metex-m3640d", "Metex M-3640D")
-DRV(metex_m4650cr, METEX_M4650CR, "metex-m4650cr", "Metex M-4650CR")
-DRV(peaktech_4370, PEAKTECH_4370, "peaktech-4370", "PeakTech 4370")
-DRV(pce_pce_dm32, PCE_PCE_DM32, "pce-pce-dm32", "PCE PCE-DM32")
-DRV(radioshack_22_168, RADIOSHACK_22_168, "radioshack-22-168", "RadioShack 22-168")
-DRV(radioshack_22_805, RADIOSHACK_22_805, "radioshack-22-805", "RadioShack 22-805")
-DRV(radioshack_22_812, RADIOSHACK_22_812, "radioshack-22-812", "RadioShack 22-812")
-DRV(tecpel_dmm_8061_ser, TECPEL_DMM_8061_SER, "tecpel-dmm-8061-ser", "Tecpel DMM-8061 (UT-D02 cable)")
-DRV(voltcraft_m3650cr, VOLTCRAFT_M3650CR, "voltcraft-m3650cr", "Voltcraft M-3650CR")
-DRV(voltcraft_m3650d, VOLTCRAFT_M3650D, "voltcraft-m3650d", "Voltcraft M-3650D")
-DRV(voltcraft_m4650cr, VOLTCRAFT_M4650CR, "voltcraft-m4650cr", "Voltcraft M-4650CR")
-DRV(voltcraft_me42, VOLTCRAFT_ME42, "voltcraft-me42", "Voltcraft ME-42")
-DRV(voltcraft_vc820_ser, VOLTCRAFT_VC820_SER, "voltcraft-vc820-ser", "Voltcraft VC-820 (UT-D02 cable)")
-DRV(voltcraft_vc830_ser, VOLTCRAFT_VC830_SER, "voltcraft-vc830-ser", "Voltcraft VC-830 (UT-D02 cable)")
-DRV(voltcraft_vc840_ser, VOLTCRAFT_VC840_SER, "voltcraft-vc840-ser", "Voltcraft VC-840 (UT-D02 cable)")
-DRV(voltcraft_vc920_ser, VOLTCRAFT_VC920_SER, "voltcraft-vc920-ser", "Voltcraft VC-920 (UT-D02 cable)")
-DRV(voltcraft_vc940_ser, VOLTCRAFT_VC940_SER, "voltcraft-vc940-ser", "Voltcraft VC-940 (UT-D02 cable)")
-DRV(voltcraft_vc960_ser, VOLTCRAFT_VC960_SER, "voltcraft-vc960-ser", "Voltcraft VC-960 (UT-D02 cable)")
-DRV(uni_t_ut60a_ser, UNI_T_UT60A_SER, "uni-t-ut60a-ser", "UNI-T UT60A (UT-D02 cable)")
-DRV(uni_t_ut60e_ser, UNI_T_UT60E_SER, "uni-t-ut60e-ser", "UNI-T UT60E (UT-D02 cable)")
-DRV(uni_t_ut60g_ser, UNI_T_UT60G_SER, "uni-t-ut60g-ser", "UNI-T UT60G (UT-D02 cable)")
-DRV(uni_t_ut61b_ser, UNI_T_UT61B_SER, "uni-t-ut61b-ser", "UNI-T UT61B (UT-D02 cable)")
-DRV(uni_t_ut61c_ser, UNI_T_UT61C_SER, "uni-t-ut61c-ser", "UNI-T UT61C (UT-D02 cable)")
-DRV(uni_t_ut61d_ser, UNI_T_UT61D_SER, "uni-t-ut61d-ser", "UNI-T UT61D (UT-D02 cable)")
-DRV(uni_t_ut61e_ser, UNI_T_UT61E_SER, "uni-t-ut61e-ser", "UNI-T UT61E (UT-D02 cable)")
-DRV(uni_t_ut71a_ser, UNI_T_UT71A_SER, "uni-t-ut71a-ser", "UNI-T UT71A (UT-D02 cable)")
-DRV(uni_t_ut71b_ser, UNI_T_UT71B_SER, "uni-t-ut71b-ser", "UNI-T UT71B (UT-D02 cable)")
-DRV(uni_t_ut71c_ser, UNI_T_UT71C_SER, "uni-t-ut71c-ser", "UNI-T UT71C (UT-D02 cable)")
-DRV(uni_t_ut71d_ser, UNI_T_UT71D_SER, "uni-t-ut71d-ser", "UNI-T UT71D (UT-D02 cable)")
-DRV(uni_t_ut71e_ser, UNI_T_UT71E_SER, "uni-t-ut71e-ser", "UNI-T UT71E (UT-D02 cable)")
-DRV(iso_tech_idm103n, ISO_TECH_IDM103N, "iso-tech-idm103n", "ISO-TECH IDM103N")
-DRV(tenma_72_7745_ser, TENMA_72_7745_SER, "tenma-72-7745-ser", "Tenma 72-7745 (UT-D02 cable)")
-DRV(tenma_72_7750_ser, TENMA_72_7750_SER, "tenma-72-7750-ser", "Tenma 72-7750 (UT-D02 cable)")
-DRV(brymen_bm25x, BRYMEN_BM25X, "brymen-bm25x", "Brymen BM25x")
+#define DMM_ENTRY(ID, CHIPSET, VENDOR, MODEL, \
+ CONN, SERIALCOMM, PACKETSIZE, TIMEOUT, DELAY, \
+ OPEN, REQUEST, VALID, PARSE, DETAILS, \
+ INIT_STATE, FREE_STATE, VALID_LEN, PARSE_LEN, \
+ CFG_GET, CFG_SET, CFG_LIST, ACQ_START) \
+ &((struct dmm_info) { \
+ { \
+ .name = ID, \
+ .longname = VENDOR " " MODEL, \
+ .api_version = 1, \
+ .init = std_init, \
+ .cleanup = std_cleanup, \
+ .scan = scan, \
+ .dev_list = std_dev_list, \
+ .dev_clear = std_dev_clear, \
+ .config_get = config_get, \
+ .config_set = config_set, \
+ .config_list = config_list, \
+ .dev_open = std_serial_dev_open, \
+ .dev_close = std_serial_dev_close, \
+ .dev_acquisition_start = dev_acquisition_start, \
+ .dev_acquisition_stop = std_serial_dev_acquisition_stop, \
+ .context = NULL, \
+ }, \
+ VENDOR, MODEL, CONN, SERIALCOMM, PACKETSIZE, TIMEOUT, DELAY, \
+ REQUEST, 1, NULL, VALID, PARSE, DETAILS, \
+ sizeof(struct CHIPSET##_info), \
+ NULL, INIT_STATE, FREE_STATE, \
+ OPEN, VALID_LEN, PARSE_LEN, \
+ CFG_GET, CFG_SET, CFG_LIST, ACQ_START, \
+ }).di
+
+#define DMM_CONN(ID, CHIPSET, VENDOR, MODEL, \
+ CONN, SERIALCOMM, PACKETSIZE, TIMEOUT, DELAY, \
+ REQUEST, VALID, PARSE, DETAILS) \
+ DMM_ENTRY(ID, CHIPSET, VENDOR, MODEL, \
+ CONN, SERIALCOMM, PACKETSIZE, TIMEOUT, DELAY, \
+ NULL, REQUEST, VALID, PARSE, DETAILS, \
+ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL)
+
+#define DMM(ID, CHIPSET, VENDOR, MODEL, SERIALCOMM, PACKETSIZE, TIMEOUT, \
+ DELAY, REQUEST, VALID, PARSE, DETAILS) \
+ DMM_CONN(ID, CHIPSET, VENDOR, MODEL, \
+ NULL, SERIALCOMM, PACKETSIZE, TIMEOUT, DELAY, \
+ REQUEST, VALID, PARSE, DETAILS)
+
+#define DMM_LEN(ID, CHIPSET, VENDOR, MODEL, \
+ CONN, SERIALCOMM, PACKETSIZE, TIMEOUT, DELAY, \
+ INIT, FREE, OPEN, REQUEST, VALID, PARSE, DETAILS) \
+ DMM_ENTRY(ID, CHIPSET, VENDOR, MODEL, \
+ CONN, SERIALCOMM, PACKETSIZE, TIMEOUT, DELAY, \
+ OPEN, REQUEST, NULL, NULL, DETAILS, \
+ INIT, FREE, VALID, PARSE, NULL, NULL, NULL, NULL)
+
+SR_REGISTER_DEV_DRIVER_LIST(serial_dmm_drivers,
+ /*
+ * The items are sorted by chipset first and then model name.
+ *
+ * This reflects the developer's perspective and is preferrable
+ * during maintenance, as a vendor/product based sort order does
+ * not work well for rebranded models, and from a support point
+ * of view it's more important to identify similarities between
+ * models and compatible devices.
+ *
+ * Fold marks {{{ }}} with matching braces were added, to further
+ * speed up navigation in the long list.
+ */
+ /* asycii based meters {{{ */
+ DMM(
+ "metrix-mx56c", asycii, "Metrix", "MX56C",
+ "2400/8n1", ASYCII_PACKET_SIZE, 0, 0, NULL,
+ sr_asycii_packet_valid, sr_asycii_parse, NULL
+ ),
+ /* }}} */
+ /* bm25x based meters {{{ */
+ DMM(
+ "brymen-bm25x", bm25x,
+ "Brymen", "BM25x", "9600/8n1/rts=1/dtr=1",
+ BRYMEN_BM25X_PACKET_SIZE, 0, 0, NULL,
+ sr_brymen_bm25x_packet_valid, sr_brymen_bm25x_parse,
+ NULL
+ ),
+ /* }}} */
+ /* bm52x based meters {{{ */
+ DMM_CONN(
+ "brymen-bm52x", brymen_bm52x, "Brymen", "BM52x",
+ "hid/bu86x", NULL, BRYMEN_BM52X_PACKET_SIZE, 4000, 500,
+ sr_brymen_bm52x_packet_request,
+ sr_brymen_bm52x_packet_valid, sr_brymen_bm52x_parse,
+ NULL
+ ),
+ DMM_CONN(
+ "brymen-bm82x", brymen_bm52x, "Brymen", "BM82x",
+ "hid/bu86x", NULL, BRYMEN_BM52X_PACKET_SIZE, 4000, 500,
+ sr_brymen_bm82x_packet_request,
+ sr_brymen_bm82x_packet_valid, sr_brymen_bm52x_parse,
+ NULL
+ ),
+ /* }}} */
+ /* bm85x based meters {{{ */
+ DMM_LEN(
+ "brymen-bm85x", brymen_bm85x, "Brymen", "BM85x",
+ NULL, "9600/8n1/dtr=1/rts=1",
+ BRYMEN_BM85x_PACKET_SIZE_MIN, 2000, 400,
+ NULL, NULL, /* INIT/FREE for DMM state */
+ brymen_bm85x_after_open, brymen_bm85x_packet_request,
+ brymen_bm85x_packet_valid, brymen_bm85x_parse,
+ NULL
+ ),
+ /* }}} */
+ /* bm86x based meters {{{ */
+ DMM_CONN(
+ "brymen-bm86x", brymen_bm86x, "Brymen", "BM86x",
+ "hid/bu86x", NULL, BRYMEN_BM86X_PACKET_SIZE, 500, 100,
+ sr_brymen_bm86x_packet_request,
+ sr_brymen_bm86x_packet_valid, sr_brymen_bm86x_parse,
+ NULL
+ ),
+ /* }}} */
+ /* dtm0660 based meters {{{ */
+ DMM(
+ "peaktech-3415", dtm0660,
+ "PeakTech", "3415", "2400/8n1/rts=0/dtr=1",
+ DTM0660_PACKET_SIZE, 0, 0, NULL,
+ sr_dtm0660_packet_valid, sr_dtm0660_parse, NULL
+ ),
+ DMM(
+ "velleman-dvm4100", dtm0660,
+ "Velleman", "DVM4100", "2400/8n1/rts=0/dtr=1",
+ DTM0660_PACKET_SIZE, 0, 0, NULL,
+ sr_dtm0660_packet_valid, sr_dtm0660_parse, NULL
+ ),
+ /* }}} */
+ /* eev121gw based meters {{{ */
+ DMM(
+ "eevblog-121gw", eev121gw, "EEVblog", "121GW",
+ "115200/8n1", EEV121GW_PACKET_SIZE, 0, 0, NULL,
+ sr_eev121gw_packet_valid, sr_eev121gw_3displays_parse, NULL
+ ),
+ /* }}} */
+ /* es519xx based meters {{{ */
+ DMM(
+ "iso-tech-idm103n", es519xx,
+ "ISO-TECH", "IDM103N", "2400/7o1/rts=0/dtr=1",
+ ES519XX_11B_PACKET_SIZE, 0, 0, NULL,
+ sr_es519xx_2400_11b_packet_valid, sr_es519xx_2400_11b_parse,
+ NULL
+ ),
+ /*
+ * Note: ES51922 and ES51986 baudrate is actually 19230. This is
+ * "out" by .15%, and so is well within the typical 1% margin
+ * that is considered acceptable in UART communication, and thus
+ * should not cause an issue.
+ *
+ * However, using 19230 as baudrate here will not work, as most DMM
+ * cables do not support that baudrate!
+ */
+ DMM(
+ "tenma-72-7750-ser", es519xx,
+ "Tenma", "72-7750 (UT-D02 cable)", "19200/7o1/rts=0/dtr=1",
+ ES519XX_11B_PACKET_SIZE, 0, 0, NULL,
+ sr_es519xx_19200_11b_packet_valid, sr_es519xx_19200_11b_parse,
+ NULL
+ ),
+ DMM(
+ "uni-t-ut60g-ser", es519xx,
+ "UNI-T", "UT60G (UT-D02 cable)", "19200/7o1/rts=0/dtr=1",
+ ES519XX_11B_PACKET_SIZE, 0, 0, NULL,
+ sr_es519xx_19200_11b_packet_valid, sr_es519xx_19200_11b_parse,
+ NULL
+ ),
+ DMM(
+ "uni-t-ut61e-ser", es519xx,
+ "UNI-T", "UT61E (UT-D02 cable)", "19200/7o1/rts=0/dtr=1",
+ ES519XX_14B_PACKET_SIZE, 0, 0, NULL,
+ sr_es519xx_19200_14b_packet_valid, sr_es519xx_19200_14b_parse,
+ NULL
+ ),
+ /* }}} */
+ /* fs9721 based meters {{{ */
+ DMM(
+ "digitek-dt4000zc", fs9721,
+ "Digitek", "DT4000ZC", "2400/8n1/dtr=1",
+ FS9721_PACKET_SIZE, 0, 0, NULL,
+ sr_fs9721_packet_valid, sr_fs9721_parse,
+ sr_fs9721_10_temp_c
+ ),
+ DMM(
+ "mastech-ms8250b", fs9721,
+ "MASTECH", "MS8250B", "2400/8n1/rts=0/dtr=1",
+ FS9721_PACKET_SIZE, 0, 0, NULL,
+ sr_fs9721_packet_valid, sr_fs9721_parse,
+ NULL
+ ),
+ DMM(
+ "pce-pce-dm32", fs9721,
+ "PCE", "PCE-DM32", "2400/8n1",
+ FS9721_PACKET_SIZE, 0, 0, NULL,
+ sr_fs9721_packet_valid, sr_fs9721_parse,
+ sr_fs9721_01_10_temp_f_c
+ ),
+ DMM(
+ "peaktech-3330", fs9721,
+ "PeakTech", "3330", "2400/8n1/dtr=1",
+ FS9721_PACKET_SIZE, 0, 0, NULL,
+ sr_fs9721_packet_valid, sr_fs9721_parse,
+ sr_fs9721_01_10_temp_f_c
+ ),
+ DMM(
+ "tecpel-dmm-8061-ser", fs9721,
+ "Tecpel", "DMM-8061 (UT-D02 cable)", "2400/8n1/rts=0/dtr=1",
+ FS9721_PACKET_SIZE, 0, 0, NULL,
+ sr_fs9721_packet_valid, sr_fs9721_parse,
+ sr_fs9721_00_temp_c
+ ),
+ DMM(
+ "tekpower-tp4000ZC", fs9721,
+ "TekPower", "TP4000ZC", "2400/8n1/dtr=1",
+ FS9721_PACKET_SIZE, 0, 0, NULL,
+ sr_fs9721_packet_valid, sr_fs9721_parse,
+ sr_fs9721_10_temp_c
+ ),
+ DMM(
+ "tenma-72-7745-ser", fs9721,
+ "Tenma", "72-7745 (UT-D02 cable)", "2400/8n1/rts=0/dtr=1",
+ FS9721_PACKET_SIZE, 0, 0, NULL,
+ sr_fs9721_packet_valid, sr_fs9721_parse,
+ sr_fs9721_00_temp_c
+ ),
+ DMM(
+ "uni-t-ut60a-ser", fs9721,
+ "UNI-T", "UT60A (UT-D02 cable)", "2400/8n1/rts=0/dtr=1",
+ FS9721_PACKET_SIZE, 0, 0, NULL,
+ sr_fs9721_packet_valid, sr_fs9721_parse,
+ NULL
+ ),
+ DMM(
+ "uni-t-ut60e-ser", fs9721,
+ "UNI-T", "UT60E (UT-D02 cable)", "2400/8n1/rts=0/dtr=1",
+ FS9721_PACKET_SIZE, 0, 0, NULL,
+ sr_fs9721_packet_valid, sr_fs9721_parse,
+ sr_fs9721_00_temp_c
+ ),
+ DMM(
+ "va-va18b", fs9721,
+ "V&A", "VA18B", "2400/8n1",
+ FS9721_PACKET_SIZE, 0, 0, NULL,
+ sr_fs9721_packet_valid, sr_fs9721_parse,
+ sr_fs9721_01_temp_c
+ ),
+ DMM(
+ "va-va40b", fs9721,
+ "V&A", "VA40B", "2400/8n1",
+ FS9721_PACKET_SIZE, 0, 0, NULL,
+ sr_fs9721_packet_valid, sr_fs9721_parse,
+ sr_fs9721_max_c_min
+ ),
+ DMM(
+ "voltcraft-vc820-ser", fs9721,
+ "Voltcraft", "VC-820 (UT-D02 cable)", "2400/8n1/rts=0/dtr=1",
+ FS9721_PACKET_SIZE, 0, 0, NULL,
+ sr_fs9721_packet_valid, sr_fs9721_parse,
+ NULL
+ ),
+ DMM(
+ "voltcraft-vc840-ser", fs9721,
+ "Voltcraft", "VC-840 (UT-D02 cable)", "2400/8n1/rts=0/dtr=1",
+ FS9721_PACKET_SIZE, 0, 0, NULL,
+ sr_fs9721_packet_valid, sr_fs9721_parse,
+ sr_fs9721_00_temp_c
+ ),
+ /* }}} */
+ /* fs9922 based meters {{{ */
+ DMM(
+ "gwinstek-gdm-397", fs9922,
+ "GW Instek", "GDM-397", "2400/8n1/rts=0/dtr=1",
+ FS9922_PACKET_SIZE, 0, 0, NULL,
+ sr_fs9922_packet_valid, sr_fs9922_parse, NULL
+ ),
+ DMM(
+ "peaktech-2025", fs9922,
+ "PeakTech", "2025", "2400/8n1/rts=0/dtr=1",
+ FS9922_PACKET_SIZE, 0, 0, NULL,
+ sr_fs9922_packet_valid, sr_fs9922_parse, NULL
+ ),
+ DMM(
+ "sparkfun-70c", fs9922,
+ "SparkFun", "70C", "2400/8n1/rts=0/dtr=1",
+ FS9922_PACKET_SIZE, 0, 0, NULL,
+ sr_fs9922_packet_valid, sr_fs9922_parse, NULL
+ ),
+ DMM(
+ "uni-t-ut61b-ser", fs9922,
+ "UNI-T", "UT61B (UT-D02 cable)", "2400/8n1/rts=0/dtr=1",
+ FS9922_PACKET_SIZE, 0, 0, NULL,
+ sr_fs9922_packet_valid, sr_fs9922_parse, NULL
+ ),
+ DMM(
+ "uni-t-ut61c-ser", fs9922,
+ "UNI-T", "UT61C (UT-D02 cable)", "2400/8n1/rts=0/dtr=1",
+ FS9922_PACKET_SIZE, 0, 0, NULL,
+ sr_fs9922_packet_valid, sr_fs9922_parse, NULL
+ ),
+ DMM(
+ "uni-t-ut61d-ser", fs9922,
+ "UNI-T", "UT61D (UT-D02 cable)", "2400/8n1/rts=0/dtr=1",
+ FS9922_PACKET_SIZE, 0, 0, NULL,
+ sr_fs9922_packet_valid, sr_fs9922_parse, NULL
+ ),
+ DMM_CONN(
+ "victor-dmm", fs9922, "Victor", "Victor DMMs",
+ "hid/victor", "2400/8n1", FS9922_PACKET_SIZE, 0, 0, NULL,
+ sr_fs9922_packet_valid, sr_fs9922_parse, NULL
+ ),
+ DMM(
+ /*
+ * Note: The VC830 doesn't set the 'volt' and 'diode' bits of
+ * the FS9922 protocol. Instead, it only sets the user-defined
+ * bit "z1" to indicate "diode mode" and "voltage".
+ */
+ "voltcraft-vc830-ser", fs9922,
+ "Voltcraft", "VC-830 (UT-D02 cable)", "2400/8n1/rts=0/dtr=1",
+ FS9922_PACKET_SIZE, 0, 0, NULL,
+ sr_fs9922_packet_valid, sr_fs9922_parse,
+ &sr_fs9922_z1_diode
+ ),
+ /* }}} */
+ /* m2110 based meters {{{ */
+ DMM(
+ "bbcgm-2010", m2110,
+ "BBC Goertz Metrawatt", "M2110", "1200/7n2",
+ BBCGM_M2110_PACKET_SIZE, 0, 0, NULL,
+ sr_m2110_packet_valid, sr_m2110_parse,
+ NULL
+ ),
+ /* }}} */
+ /* meterman_38xr based meters {{{ */
+ DMM(
+ "meterman-38xr", meterman_38xr,
+ "Meterman", "38XR", "9600/8n1/rts=0/dtr=1",
+ METERMAN_38XR_PACKET_SIZE, 0, 0, NULL,
+ meterman_38xr_packet_valid, meterman_38xr_parse,
+ NULL
+ ),
+ /* }}} */
+ /* metex14 based meters {{{ */
+ DMM(
+ "mastech-mas345", metex14,
+ "MASTECH", "MAS345", "600/7n2/rts=0/dtr=1",
+ METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
+ sr_metex14_packet_valid, sr_metex14_parse,
+ NULL
+ ),
+ DMM(
+ "metex-m3640d", metex14,
+ "Metex", "M-3640D", "1200/7n2/rts=0/dtr=1",
+ METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
+ sr_metex14_packet_valid, sr_metex14_parse,
+ NULL
+ ),
+ DMM(
+ "metex-m3860m", metex14,
+ "Metex", "M-3860M", "9600/7n2/rts=0/dtr=1",
+ 4 * METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
+ sr_metex14_4packets_valid, sr_metex14_4packets_parse,
+ NULL
+ ),
+ DMM(
+ "metex-m4650cr", metex14,
+ "Metex", "M-4650CR", "1200/7n2/rts=0/dtr=1",
+ METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
+ sr_metex14_packet_valid, sr_metex14_parse,
+ NULL
+ ),
+ DMM(
+ "metex-me21", metex14,
+ "Metex", "ME-21", "2400/7n2/rts=0/dtr=1",
+ METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
+ sr_metex14_packet_valid, sr_metex14_parse,
+ NULL
+ ),
+ DMM(
+ "metex-me31", metex14,
+ "Metex", "ME-31", "600/7n2/rts=0/dtr=1",
+ METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
+ sr_metex14_packet_valid, sr_metex14_parse,
+ NULL
+ ),
+ DMM(
+ "peaktech-3410", metex14,
+ "PeakTech", "3410", "600/7n2/rts=0/dtr=1",
+ METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
+ sr_metex14_packet_valid, sr_metex14_parse,
+ NULL
+ ),
+ DMM(
+ "peaktech-4370", metex14,
+ "PeakTech", "4370", "1200/7n2/rts=0/dtr=1",
+ METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
+ sr_metex14_packet_valid, sr_metex14_parse,
+ NULL
+ ),
+ DMM(
+ "peaktech-4390a", metex14,
+ "PeakTech", "4390A", "9600/7n2/rts=0/dtr=1",
+ 4 * METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
+ sr_metex14_4packets_valid, sr_metex14_4packets_parse,
+ NULL
+ ),
+ DMM(
+ "radioshack-22-168", metex14,
+ "RadioShack", "22-168", "1200/7n2/rts=0/dtr=1",
+ METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
+ sr_metex14_packet_valid, sr_metex14_parse,
+ NULL
+ ),
+ DMM(
+ "radioshack-22-805", metex14,
+ "RadioShack", "22-805", "600/7n2/rts=0/dtr=1",
+ METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
+ sr_metex14_packet_valid, sr_metex14_parse,
+ NULL
+ ),
+ DMM(
+ "voltcraft-m3650cr", metex14,
+ "Voltcraft", "M-3650CR", "1200/7n2/rts=0/dtr=1",
+ METEX14_PACKET_SIZE, 150, 20, sr_metex14_packet_request,
+ sr_metex14_packet_valid, sr_metex14_parse,
+ NULL
+ ),
+ DMM(
+ "voltcraft-m3650d", metex14,
+ "Voltcraft", "M-3650D", "1200/7n2/rts=0/dtr=1",
+ METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
+ sr_metex14_packet_valid, sr_metex14_parse,
+ NULL
+ ),
+ DMM(
+ "voltcraft-m4650cr", metex14,
+ "Voltcraft", "M-4650CR", "1200/7n2/rts=0/dtr=1",
+ METEX14_PACKET_SIZE, 0, 0, sr_metex14_packet_request,
+ sr_metex14_packet_valid, sr_metex14_parse,
+ NULL
+ ),
+ DMM(
+ "voltcraft-me42", metex14,
+ "Voltcraft", "ME-42", "600/7n2/rts=0/dtr=1",
+ METEX14_PACKET_SIZE, 250, 60, sr_metex14_packet_request,
+ sr_metex14_packet_valid, sr_metex14_parse,
+ NULL
+ ),
+ /* }}} */
+ /* ms2115b based meters {{{ */
+ DMM(
+ "mastech-ms2115b", ms2115b,
+ "MASTECH", "MS2115B", "1200/8n1",
+ MS2115B_PACKET_SIZE, 0, 0, NULL,
+ sr_ms2115b_packet_valid, sr_ms2115b_parse,
+ NULL
+ ),
+ /* }}} */
+ /* ms8250d based meters {{{ */
+ DMM(
+ "mastech-ms8250d", ms8250d,
+ "MASTECH", "MS8250D", "2400/8n1/rts=0/dtr=1",
+ MS8250D_PACKET_SIZE, 0, 0, NULL,
+ sr_ms8250d_packet_valid, sr_ms8250d_parse,
+ NULL
+ ),
+ /* }}} */
+ /* rs9lcd based meters {{{ */
+ DMM(
+ "radioshack-22-812", rs9lcd,
+ "RadioShack", "22-812", "4800/8n1/rts=0/dtr=1",
+ RS9LCD_PACKET_SIZE, 0, 0, NULL,
+ sr_rs9lcd_packet_valid, sr_rs9lcd_parse,
+ NULL
+ ),
+ /* }}} */
+ /* ut71x based meters {{{ */
+ DMM(
+ "tenma-72-7730-ser", ut71x,
+ "Tenma", "72-7730 (UT-D02 cable)", "2400/7o1/rts=0/dtr=1",
+ UT71X_PACKET_SIZE, 0, 0, NULL,
+ sr_ut71x_packet_valid, sr_ut71x_parse, NULL
+ ),
+ DMM(
+ "tenma-72-7732-ser", ut71x,
+ "Tenma", "72-7732 (UT-D02 cable)", "2400/7o1/rts=0/dtr=1",
+ UT71X_PACKET_SIZE, 0, 0, NULL,
+ sr_ut71x_packet_valid, sr_ut71x_parse, NULL
+ ),
+ DMM(
+ "tenma-72-9380a-ser", ut71x,
+ "Tenma", "72-9380A (UT-D02 cable)", "2400/7o1/rts=0/dtr=1",
+ UT71X_PACKET_SIZE, 0, 0, NULL,
+ sr_ut71x_packet_valid, sr_ut71x_parse, NULL
+ ),
+ DMM(
+ "uni-t-ut71a-ser", ut71x,
+ "UNI-T", "UT71A (UT-D02 cable)", "2400/7o1/rts=0/dtr=1",
+ UT71X_PACKET_SIZE, 0, 0, NULL,
+ sr_ut71x_packet_valid, sr_ut71x_parse, NULL
+ ),
+ DMM(
+ "uni-t-ut71b-ser", ut71x,
+ "UNI-T", "UT71B (UT-D02 cable)", "2400/7o1/rts=0/dtr=1",
+ UT71X_PACKET_SIZE, 0, 0, NULL,
+ sr_ut71x_packet_valid, sr_ut71x_parse, NULL
+ ),
+ DMM(
+ "uni-t-ut71c-ser", ut71x,
+ "UNI-T", "UT71C (UT-D02 cable)", "2400/7o1/rts=0/dtr=1",
+ UT71X_PACKET_SIZE, 0, 0, NULL,
+ sr_ut71x_packet_valid, sr_ut71x_parse, NULL
+ ),
+ DMM(
+ "uni-t-ut71d-ser", ut71x,
+ "UNI-T", "UT71D (UT-D02 cable)", "2400/7o1/rts=0/dtr=1",
+ UT71X_PACKET_SIZE, 0, 0, NULL,
+ sr_ut71x_packet_valid, sr_ut71x_parse, NULL
+ ),
+ DMM(
+ "uni-t-ut71e-ser", ut71x,
+ "UNI-T", "UT71E (UT-D02 cable)", "2400/7o1/rts=0/dtr=1",
+ UT71X_PACKET_SIZE, 0, 0, NULL,
+ sr_ut71x_packet_valid, sr_ut71x_parse, NULL
+ ),
+ DMM(
+ "uni-t-ut804-ser", ut71x,
+ "UNI-T", "UT804", "2400/7o1/rts=0/dtr=1",
+ UT71X_PACKET_SIZE, 0, 0, NULL,
+ sr_ut71x_packet_valid, sr_ut71x_parse, NULL
+ ),
+ DMM(
+ "voltcraft-vc920-ser", ut71x,
+ "Voltcraft", "VC-920 (UT-D02 cable)", "2400/7o1/rts=0/dtr=1",
+ UT71X_PACKET_SIZE, 0, 0, NULL,
+ sr_ut71x_packet_valid, sr_ut71x_parse, NULL
+ ),
+ DMM(
+ "voltcraft-vc940-ser", ut71x,
+ "Voltcraft", "VC-940 (UT-D02 cable)", "2400/7o1/rts=0/dtr=1",
+ UT71X_PACKET_SIZE, 0, 0, NULL,
+ sr_ut71x_packet_valid, sr_ut71x_parse, NULL
+ ),
+ DMM(
+ "voltcraft-vc960-ser", ut71x,
+ "Voltcraft", "VC-960 (UT-D02 cable)", "2400/7o1/rts=0/dtr=1",
+ UT71X_PACKET_SIZE, 0, 0, NULL,
+ sr_ut71x_packet_valid, sr_ut71x_parse, NULL
+ ),
+ /* }}} */
+ /* vc870 based meters {{{ */
+ DMM(
+ "voltcraft-vc870-ser", vc870,
+ "Voltcraft", "VC-870 (UT-D02 cable)", "9600/8n1/rts=0/dtr=1",
+ VC870_PACKET_SIZE, 0, 0, NULL,
+ sr_vc870_packet_valid, sr_vc870_parse, NULL
+ ),
+ /* }}} */
+ /* vc96 based meters {{{ */
+ DMM(
+ "voltcraft-vc96", vc96,
+ "Voltcraft", "VC-96", "1200/8n2",
+ VC96_PACKET_SIZE, 0, 0, NULL,
+ sr_vc96_packet_valid, sr_vc96_parse,
+ NULL
+ ),
+ /* }}} */
+ /*
+ * The list is sorted. Add new items in the respective chip's group.
+ */
+);
projects / libsigrok.git / blobdiff