0.3.0 (2014-05-06)
------------------

Note: This release DOES change the libsigrok API. That means it is NOT
      backwards-compatible and frontends will need updates.

 * New supported hardware:
   - Logic analyzers:
     - ChronoVu LA16
     - Sysclk LWLA1034
   - Oscilloscopes:
     - Agilent DSO1000 series (various models)
     - Hameg HMO compact series (various models)
     - Rigol DS2000 series (various models)
     - Rigol VS5000 series (various models)
   - Multimeters:
     - BBC Goerz Metrawatt M2110
     - Brymen BM869
     - Fluke 189
     - Gossen Metrawatt MetraHIT 1x/2x series (various models)
     - Tenma 72-7745 (rebadged UNI-T UT60E)
     - Tenma 72-7750 (rebadged UNI-T UT60G)
     - UNI-T UT60G
     - UNI-T UT61B
     - UNI-T UT61C
     - V&A VA40B
     - Voltcraft M-3650CR
     - Voltcraft ME-42
   - Thermometers:
     - APPA 55II
   - Programmable power supplies:
     - Atten PPS3000 series (various models, tested on PPS3203T-3S).
     - Conrad DIGI 35 CPU
 * Add support for channel groups.
 * Add generic SCPI backend code which can be used via various transports:
   - Serial ports
   - USBTMC
   - TCP/RAW
   - TCP/Rigol (Rigol-VS5000 series specific)
   - VXI
   - librevisa
 * udev rules file: Add entries for newly supported hardware.
 * New config keys:
   - SR_CONF_DEMODULATOR
   - SR_CONF_CENTER_FREQUENCY
   - SR_CONF_NUM_LOGIC_CHANNELS
   - SR_CONF_NUM_ANALOG_CHANNELS
   - SR_CONF_CLOCK_EDGE
   - SR_CONF_POWER_SUPPLY
   - SR_CONF_OUTPUT_VOLTAGE
   - SR_CONF_OUTPUT_VOLTAGE_MAX
   - SR_CONF_OUTPUT_CURRENT
   - SR_CONF_OUTPUT_CURRENT_MAX
   - SR_CONF_OUTPUT_ENABLED
   - SR_CONF_OUTPUT_CHANNEL
   - SR_CONF_OVER_VOLTAGE_PROTECTION
   - SR_CONF_OVER_CURRENT_PROTECTION
   - SR_CONF_DEVICE_MODE
   - SR_CONF_TEST_MODE
 * New config info types:
   - SR_T_INT32
 * New measurement quantity keys:
   - SR_MQ_TIME
 * New measurement quantity flags:
   - SR_MQFLAG_DURATION
   - SR_MQFLAG_AVG
 * New device instance types:
   - SR_INST_SCPI
 * New error codes:
   - SR_ERR_CHANNEL_GROUP
 ∗ The SR_T_CHAR config type has been renamed to SR_T_STRING.
 * New build dependencies:
   - libserialport >= 0.1.0 (optional).
     - All drivers that talk to serial ports now require libserialport.
     - If libserialport is not found, those drivers will not be built.
   - librevisa >= 0.0.20130812 (optional, only used by some drivers).
 * Dropped build dependecies:
   - libasound2 is no longer required (only the removed alsa driver used it).
   - libudev is no longer required (only the removed link-mso19 driver used it).
 * Serial port handling code:
   - Add support for 5/6 data bits and non-standard baud rates.
   - Fix an issue related to nonblocking reads (bug #188).
   - Fix an 'invalid arguments' condition causing problems (bug #192).
 * alsa: This driver was removed (also fixes bugs #28, #61, #96, #114).
 * asix-sigma:
   - Publish SR_CONF_CAPTURE_RATIO correctly (bugs #287, #291).
   - Don't set invalid config options (bug #86).
   - Various other bugfixes.
 * cem-dt-885x: Fix a code portability issue (bug #267).
 * chronovu-la:
   - Rename the 'chronovu-la8' driver to 'chronovu-la'.
   - Add support for the ChronoVu LA16.
   - Fix a segfault when doing multiple acquisitions on an LA8 (bug #247).
   - Document that streaming is not possible for LA8/LA16 (bug #261).
 * demo:
   - Add support for analog channels (bug #11).
   - Make the number of channels user-configurable.
   - Add per-channel-group options.
   - Implement analog sample patterns: sine, triangle, sawtooth.
   - Fix a samplerate related issue with rates >= 50kHz (bugs #294, #295).
   - Fix an issue causing data glitches every 40ms (bug #297).
   - Fix an issue related to channel group handling (bug #262).
 * digitek-dt4000zc: Fix driver on NetBSD due to missing DTR=1 (bug #189).
 * fx2lafw:
   - Fix incorrect unitsize when a trigger fires (bug #182).
   - Implement config_get() for SR_CONF_LIMIT_SAMPLES.
   - Don't send more samples than requested to the session bus.
 * gmc-mh-1x-2x:
   - Add new (sub)driver 'gmc-mh-2x-bd232'.
   - Add support for the SI232-II interface.
 * hameg-hmo:
   - Fix a build issue on Mac OS X (bug #216).
   - Various fixes related to frame limit, samplerate, options, etc.
 * link-mso19: Drop unfinished driver for now (until it starts working).
 * openbench-logic-sniffer:
   - Fix a serial port related issue/hang, seen on (e.g.) NetBSD.
   - Fix an SR_CONF_PATTERN_MODE related problem (bugs #184, #190).
   - Fix a serial (non)blocking mode issue (bug #231).
   - Temporarily disable the driver on Windows (needs portability fixes).
   - Fix an endianness issue in the protocol handling (bug #135).
   - Fix a sampling issue when (samples % 4) != 0 (bug #200).
   - Fix an issue occuring when all channels were disabled (bugs #316, #347).
   - Add an option to turn test patterns off again (bug #293).
 * rigol-ds:
   - Rename the 'rigol-ds1xx2' driver to 'rigol-ds'.
   - Add support for more models and unify the driver code (bug #212).
   - Add support for RS232 connectivity (previously only USBTMC worked).
   - Enable the driver on non-Linux platforms since all transports the driver
     uses are provided by cross-platform code/libs now (e.g. serial, USBTMC).
   - Add support for 4 channels (required by some models).
   - Add support for channel groups.
   - Advertise SR_CONF_LIMIT_FRAMES support.
   - Fix an issue with SR_DF_END sending.
   - Enable/disable LA pod when (de)selecting digital channels.
   - Disable key lock when closing device.
   - Work around issues due to DS1000 specific protocol changes (bug #283).
   - Fix incorrect digital channel numbers on some models (bug #269).
   - Fix an issue with partial data reads (bugs #220, #209, #207).
 * saleae-logic16:
   - Fix an issue related to USB device claiming (bug #159).
   - Don't send more samples than requested to the session bus (bug #350).
   - Use unitsize 1 (not 2) if none of channels 8-15 are used.
 * serial-dmm: Fix some parse issues by increasing a timeout.
 * sysclk-lwla: Fix a sampling issue related to a glib API call (bug #270).
 * uni-t-ut32x: Fix typo which prevented usage with multiple devices.
 * victor-dmm: Fix MIN/MAX always being reported (bug #228).
 * zeroplus-logic-cube:
   - Add support for 32-channel models and additional memory sizes.
   - Fix a frontend issue due to missing SR_CONF_CAPTURE_RATIO.
   - Fix an issue causing pre-trigger garbage data to be sent (bug #222).
   - Add initial voltage threshold support.
 * Various drivers:
   - Expose missing SR_CONF_TRIGGER_TYPE.
   - Report max. possible number of samples (bugs #197, #258, #263).
 * Output modules:
   - Skip analog channels in logic-only output formats.
   - Remove the obolete output module API, add wrapper calls for the new one.
   - Stop using the obsolete output API (bugs #288, #47, #48).
   - Properly receive and handle samplerate metadata (bug #46).
 * input/vcd: Abort with an error upon > 64 channels (bug #194).
 * output/vcd:
   - Fix output for more than 8 channels.
   - Output timestamp only once per change.
   - Minor whitespace changes of output files to make them more readable.
   - Remove bogus $dumpvars and $dumpoff commands.
   - Various bugfixes and portability fixes.
 * output/csv:
   - Remove a 64-channel limit (bug #193).
   - Fix an issue resulting in incorrect trailing commas (bug #230).
   - Fix an issue where all timestamps would be zero (bug #35).
 * Rename 'probe' to 'channel' in all places, since libsigrok supports a lot
   of gear where 'channel' fits better (bug #259).
 * Change TRIGGER_SLOPE from SR_T_UINT64 to SR_T_STRING.
 * Windows support improvements:
   - Use libserialport (+other backend code) to fix serial devices (bug #91).
   - Add serial source addition/removal backend code (bug #206).
   - Add backend code for properly supporting USB based devices.
 * Fix various memory leaks in the backend code.
 * Fix some incorrect parsing of floating point numbers in the strutil code.
 * Fix various endianness issues in backend code and drivers (bug #266).
 * Fix a few issues related to incorrect parsing with non-ANSI-C locales
   (bugs #271, #272, #273, #274).
 * Fix an issue related to data being sent to the libsigrok session which
   was not a multiple of the unit/sample size (bugs, #289, #290).
 * Drop the es51922 DMM parser (replaced by the generic es519xx parser).
 * libsigrok session files:
   - The libsigrok session file format (for *.sr files) has changed, and the
     file format 'version' field is bumped to 2. Older libsigrok versions will
     not be able to handle version 2 files, but new libsigrok versions can
     handle both version 1 and version 2 files. New libsigrok versions will
     always write/output version 2 files.
   - Fix an issue resulting in left-over temporary files (bug #276).
   - Fix an issue with analog probes (unsupported) in *.sr files (bug #277).
   - Fix an issue with missing samplerate from session files (bug #275).
 * Improved API documentation.
 * Major API changes (overview):
   - Change various function/macro names related to the probe->channel rename.
   - Change various functions due to the new channel group feature.
   - All enums in the public API now have names (e.g. 'enum sr_mqflag').
   - The lib no longer defineѕ names with _t suffix (POSIX reserved).
   - New API calls:
      - sr_session_dev_list()
      - sr_session_save_init()
      - sr_session_append()
      - sr_config_commit()
      - sr_output_new()
      - sr_output_send()
      - sr_output_free()
   - Obsoleted and removed API calls:
      - sr_filter_channels()
   - 'struct sr_session' is now opaque (contents shouldn't be used directly).
   - Please see the Doxygen API documentation for further details.
 * Build system:
   - Switch to a non-recursive automake setup (fewer files, faster builds).
   - configure: Clearly mark required and optional libs.

0.2.2 (2013-11-04)
------------------

Note: This release does NOT change the libsigrok API. While new config keys,
      config info types, and unit codes have been added (additional enum
      entries / numbers), no existing interfaces were added/changed/removed.
      Frontends should continue to work fine without recompiling or relinking.

 * New supported hardware:
   - Logic analyzers:
     - Saleae Logic16
   - Thermometers:
     - Center 309
     - UNI-T UT325
     - Voltcraft K204
   - Multimeters:
     - ISOTECH IDM103N
     - Metex M-4650CR
     - Norma DM950
     - Voltcraft M-4650CR
   - Energy meters:
     - EDF Teleinfo
 * New config keys:
   - SR_CONF_VOLTAGE_THRESHOLD
   - SR_CONF_EXTERNAL_CLOCK
   - SR_CONF_SWAP
   - SR_CONF_ENERGYMETER
 * New config info types:
   - SR_T_DOUBLE_RANGE
 * New units:
   - SR_UNIT_REVOLUTIONS_PER_MINUTE
   - SR_UNIT_VOLT_AMPERE
   - SR_UNIT_WATT
   - SR_UNIT_WATT_HOUR
 * New input modules:
   - csv (comma-separated values)
 * Bump required libzip version to >= 0.10.
 * uni-t-dmm: This driver now requires the specification of the USB VID/PID
   of the cable that is used. Example for sigrok-cli:
    - Old: sigrok-cli --driver voltcraft-vc820 ...
    - New: sigrok-cli --driver voltcraft-vc820:conn=1a86.e008 ...
 * openbench-logic-sniffer:
   - Initial test pattern support (SR_CONF_PATTERN_MODE).
   - Initial external clock support (SR_CONF_EXTERNAL_CLOCK).
   - Initial channel swap support (SR_CONF_SWAP).
   - Various minor fixes and improvements.
 * When a frontend adds a device instance to a running session, start
   acquisition on it. This helps with the collectd use-case where devices
   can be removed and added dynamically while a session is running.
 * rigol-ds1xx2: Support newer Linux kernels with USBTMC in /sys/class/usbmisc.
 * rigol-ds1xx2: Also detect the Rigol DS1152E/DS1152D.
 * agilent-dmm: Fix a segfault happening in certain cases.
 * output/analog: Support all currently known MQFLAGs.
 * Fix a minor compile issue due to an incorrect #include.
 * Fix two compile issues on FreeBSD (bug #185).
 * es519xx: New generic parser for various Cyrustek DMM ICs.
 * es51922/fs9721/fs9922/metex14: Use diode MQFLAG (bug #141).
 * voltcraft-vc830: Fix diode mode handling (bug #142).
 * Add the missing HACKING file to the tarball.
 * README.devices: Updates/notes for newly added devices.

0.2.1 (2013-08-07)
------------------

Note: This release does NOT change the libsigrok API. While new config keys,
      config info types, and error codes have been added (additional enum
      entries / numbers), no existing interfaces were added/changed/removed.
      Frontends should continue to work fine without recompiling or relinking.

 * New supported hardware:
   - Logic analyzers:
     - IKALOGIC Scanalogic-2
     - IKALOGIC ScanaPLUS
   - Sound level meters:
     - CEM DT-8852
     - Kecheng KC-330B
   - Multimeters:
     - UNI-T UT60A
     - UNI-T UT60E
     - Voltcraft M-3650D
     - Voltcraft VC-830
 * Drop the Tecpel DMM-8060 (doesn't have PC connectivity).
 * New config keys:
   - SR_CONF_SPL_WEIGHT_FREQ
   - SR_CONF_SPL_WEIGHT_TIME
   - SR_CONF_SPL_MEASUREMENT_RANGE
   - SR_CONF_HOLD_MIN
   - SR_CONF_HOLD_MAX
   - SR_CONF_POWER_OFF
   - SR_CONF_DATA_SOURCE
 * New config info types:
   - SR_T_UINT64_RANGE
 * New error codes:
   - SR_ERR_TIMEOUT
 * Always link against libm, the math library (bug #115).
 * Fix a bug in sr_si_string_u64() at al (bug #73).
 * output/csv: Fix incorrect probe order.
 * alsa: Fix a double-free issue (bug #129).
 * zeroplus-logic-cube: Fix a bug in the driver cleanup code.
 * ikalogic-scanalogic2: Use GET_REPORT (bug #130).
 * uni-t-dmm: Fix a bug breaking the UNI-T UT61E (bug #136).
 * Various internal consistency fixes and code cleanups.
 * Improved Doxygen documentation.
 * Fixed various memory leaks.

0.2.0 (2013-05-04)
------------------

Note: This release DOES change the libsigrok API. That means it is NOT
      backwards-compatible and frontends will need updates.

 * Support for analog sources (oscilloscopes, DMMs, data loggers) was added.
 * New supported hardware:
   - Logic analyzers:
     - CWAV USBee DX
     - ZEROPLUS LAP-16128U
   - Oscilloscopes:
     - Hantek DSO-2090 (USB scope)
     - Rigol DS1052D
     - Rigol DS1052E
     - Rigol DS1102D
     - Rigol DS1102E
   - Multimeters:
     - Agilent U1231A
     - Agilent U1232A
     - Agilent U1233A
     - Brymen BM857
     - Digitek DT4000ZC
     - Fluke 187
     - Fluke 189
     - Fluke 287
     - Fluke 289
     - Fluke ScopeMeter 199B
     - MASTECH MAS345
     - Metex ME-31
     - Metex M-3640D
     - PCE PCE-DM32
     - PeakTech 3410
     - PeakTech 4370
     - RadioShack 22-168
     - RadioShack 22-805
     - RadioShack 22-812
     - Tecpel DMM-8060
     - Tecpel DMM-8061
     - TekPower TP4000ZC
     - UNI-T UT61D
     - UNI-T UT61E
     - V&A VA18B
     - Victor 70C
     - Victor 86C
     - Voltcraft VC-820
     - Voltcraft VC-840
   - Sound level meters:
     - Colead SL-5868P
     - Tondaj SL-814
   - Temperature/humidity/CO loggers:
     - Lascar EL-USB and EL-USB CO series (various models)
     - MIC 98581
     - MIC 98583
 * The limitation of max. 64 digital probes has been removed in many places.
 * Added generic DMM protocol parsers usable for various DMMs, over various
   cables and/or transports (e.g. same protocol over serial or USB/HID):
   - Cyrustek ES51922 binary protocol.
   - Fortune Semiconductor FS9721_LP3/FS9721B binary protocol.
   - Fortune Semiconductor FS9922-DMM3/DMM4 binary protocol.
   - Metex 14-byte ASCII protocol.
   - RadioShack 22-812 binary protocol.
 * zeroplus-logic-cube driver:
   - Fix acquisition at some specific samplerates. Only report valid ones.
   - Default to a samplerate of 1MHz.
   - Fix trigger code.
   - Add pre-trigger (capture ratio) setting.
   - Add support for the ZEROPLUS LAP-16128U.
 * fx2lafw driver:
   - Add support for the CWAV USBee DX. This requires the latest version of
     the fx2lafw firmware files.
   - Add support for wide sampling (i.e. 16 probes instead of just 8).
   - Fix multi-stage (software) triggers.
   - Fix various memory leaks, firmware upload timeout bugs, and other issues.
   - Various performance and memory usage improvements in the driver.
 * chronovu-la8 driver:
   - Add support for newer LA8 versions with USB VID/PID 0403:8867.
 * demo driver:
   - Various bugfixes when setting time/sample limits.
 * openbench-logic-sniffer driver:
   - Don't try to scan all available serial ports for OLS devices. Instead,
     the serial port to use now has to be specified by the user.
   - Allow disabling RLE.
 * udev rules file: Add many new entries for additional devices.
 * New output formats:
   - analog: Prints analog values and their unit (e.g. from scopes or DMMs).
 * New input formats:
   - vcd: Value Change Dump format
   - wav: Waveform audio file format (for analog data)
 * 'binary' input format: Add support for a 'samplerate' option.
 * API related changes:
   - There is generated Doxygen API documentation now.
   - The header that frontends should include is: <libsigrok/libsigrok.h>.
     There are other headers which are installed, but those are not meant to
     be included directly by the frontends.
   - There were numerous API changes, additions and removals, too many to list
     here. Please check the source code or Doxygen API documentation for the
     current set of API functions.
 * Serial port code:
    - Various improvements and fixes related to multiple parameters such as
      directions, baudrate, flow control, and others.
    - Add support for more baudrates (e.g. very low ones such as 600/1200)
      that are used in some devices.
    - Add support for setting DTR/RTS.
 * gnuplot files: Add sample files for CWAV USBee DX (for 8/16 bit sampling).
 * Documentation updates:
   - Add a README.devices file which contains various notes for users of
     libsigrok about device- and/or driver-specific issues.
   - Update README, HACKING, and other documents.
   - Updated build dependencies list.
     - The following libs are needed in more recent versions now:
       - glib (required): Now must be >= 2.32.0.
       - libusb-1.0 (optional): Now must be >= 1.0.9.
     - The following new libs were added as (optional) dependencies:
       - libasound / alsa-lib (optional): >= 1.0
       - check (optional, only needed for unit tests): >= 0.9.4
 * Portability:
   - Various compile fixes for Windows, FreeBSD/NetBSD/OpenBSD, and Mac OS X.
   - Simplify/allow/fix cross-compilation of libsigrok.
   - Various bugfixes for 32bit systems.
   - Various endianness fixes.
 * configure:
    - Add a --disable-all-drivers option. This can be overridden by
      additional --enable-<drivername> options to selectively enable only some.
    - Improve autodetection of libraries, and only enable drivers for which
      all required libraries were found.
 * Add a test suite for libsigrok with a few unit tests (the list will grow).

0.1.1 (2012-05-30)
------------------

Note: This release does NOT change the libsigrok API.

 * The 'saleae-logic' driver (which depends on the Saleae firmware), has
   been replaced with the new 'fx2lafw' driver, which uses an open-source
   firmware for Cypress FX2 chips which is also named 'fx2lafw'.
   Details: http://sigrok.org/wiki/Fx2lafw
   This new driver (+ firmware) currently supports the following devices:
     - ARMFLY AX-Pro
     - Braintechnology USB-LPS
     - EE Electronics ESLA100
     - EE Electronics ESLA201A
     - Robomotic MiniLogic
     - Robomotic BugLogic 3
     - Saleae Logic
     - USBee AX
     - USBee SX
     - All Cypress FX2 eval boards with stock Cypress VID/PID, including:
       - Lcsoft Mini Board
       - Braintechnology USB Interface V2.x
   Only acquisition with 8 probes is supported so far. Support for 16 probes
   and support for analog signal acquisition (on devices which have these
   capabilities) will be added later.
 * ASIX SIGMA driver:
   - Add support for the ASIX SIGMA2. This requires the latest version of
     the SIGMA/SIGMA2 firmware files.
     Details: http://sigrok.org/wiki/Firmware
   - Various bugfixes.
 * ZEROPLUS Logic Cube LAP-C (16032): Fix a segfault.
 * udev file: Add entries for Robomotic BugLogic 3, Velleman PCSU1000,
   Ideofy LA-08, ARMFLY AX-Pro, and Braintechnology USB Interface V2.x.
 * The zlib dependency has been removed (no longer needed).
 * Fix compiling with "Homebrew" (Mac OS X).
 * libsigrok now expects firmware files in $prefix/share/sigrok-firmware by
   default (was $prefix/share/libsigrok/firmware before).
 * Fix a Makefile.am bug which caused the generated ChangeLog files being
   accidentally deleted upon 'make distclean'.
 * ChronoVu LA8 input file format: Improve autodetection of the file format.
   We now only accept files of the size 8388613 bytes (all LA8 files have
   exactly this amount of bytes).

0.1.0 (2012-04-17)
------------------

 * Initial release.