src/hardware/scpi-pps/profiles.c

   1 /*
   2  * This file is part of the libsigrok project.
   3  *
   4  * Copyright (C) 2014 Bert Vermeulen <bert@biot.com>
   5  * Copyright (C) 2015 Google, Inc.
   6  * (Written by Alexandru Gagniuc <mrnuke@google.com> for Google, Inc.)
   7  * Copyright (C) 2017,2019 Frank Stettner <frank-stettner@gmx.net>
   8  *
   9  * This program is free software: you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License as published by
  11  * the Free Software Foundation, either version 3 of the License, or
  12  * (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  21  */
  22
  23 #include <config.h>
  24 #include <string.h>
  25 #include <strings.h>
  26 #include "protocol.h"
  27
  28 #define CH_IDX(x) (1 << x)
  29 #define FREQ_DC_ONLY {0, 0, 0, 0, 0}
  30 #define NO_OVP_LIMITS {0, 0, 0, 0, 0}
  31 #define NO_OCP_LIMITS {0, 0, 0, 0, 0}
  32
  33 /* Agilent/Keysight N5700A series */
  34 static const uint32_t agilent_n5700a_devopts[] = {
  35         SR_CONF_CONTINUOUS,
  36         SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
  37         SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
  38 };
  39
  40 static const uint32_t agilent_n5700a_devopts_cg[] = {
  41         SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
  42         SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
  43         SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
  44         SR_CONF_VOLTAGE | SR_CONF_GET,
  45         SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
  46         SR_CONF_CURRENT | SR_CONF_GET,
  47         SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
  48 };
  49
  50 static const struct channel_group_spec agilent_n5700a_cg[] = {
  51         { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC },
  52 };
  53
  54 static const struct channel_spec agilent_n5767a_ch[] = {
  55         { "1", { 0, 60, 0.0072, 3, 4 }, { 0, 25, 0.003, 3, 4 }, { 0, 1500 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
  56 };
  57
  58 static const struct channel_spec agilent_n5763a_ch[] = {
  59         { "1", { 0, 12.5, 0.0015, 3, 4 }, { 0, 120, 0.0144, 3, 4 }, { 0, 1500 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
  60 };
  61
  62 /*
  63  * TODO: OVER_CURRENT_PROTECTION_ACTIVE status can be determined by the OC bit
  64  * in STAT:QUES:EVEN?, but this is not implemented.
  65  */
  66 static const struct scpi_command agilent_n5700a_cmd[] = {
  67         { SCPI_CMD_REMOTE, "SYST:COMM:RLST REM" },
  68         { SCPI_CMD_LOCAL, "SYST:COMM:RLST LOC" },
  69         { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" },
  70         { SCPI_CMD_GET_MEAS_CURRENT, "MEAS:CURR?" },
  71         { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" },
  72         { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" },
  73         { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" },
  74         { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" },
  75         { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP:STAT?" },
  76         { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP ON" },
  77         { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP OFF" },
  78         { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":VOLT:PROT?" },
  79         { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":VOLT:PROT %.6f" },
  80         { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ENABLED, ":CURR:PROT:STAT?" },
  81         { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, ":CURR:PROT:STAT ON?"},
  82         { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, ":CURR:PROT:STAT OFF?"},
  83         /* Current limit (CC mode) and OCP are set using the same command. */
  84         { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR?" },
  85         { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR %.6f" },
  86         ALL_ZERO
  87 };
  88
  89 /* BK Precision 9130 series */
  90 static const uint32_t bk_9130_devopts[] = {
  91         SR_CONF_CONTINUOUS,
  92         SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
  93         SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
  94 };
  95
  96 static const uint32_t bk_9130_devopts_cg[] = {
  97         SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
  98         SR_CONF_VOLTAGE | SR_CONF_GET,
  99         SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
 100         SR_CONF_CURRENT | SR_CONF_GET,
 101         SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
 102         SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
 103 };
 104
 105 static const struct channel_spec bk_9130_ch[] = {
 106         { "1", { 0, 30, 0.001, 3, 3 }, { 0, 3, 0.001, 3, 3 }, { 0, 90, 0, 3, 3 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
 107         { "2", { 0, 30, 0.001, 3, 3 }, { 0, 3, 0.001, 3, 3 }, { 0, 90, 0, 3, 3 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
 108         { "3", { 0,  5, 0.001, 3, 3 }, { 0, 3, 0.001, 3, 3 }, { 0, 15, 0, 3, 3 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
 109 };
 110
 111 static const struct channel_group_spec bk_9130_cg[] = {
 112         { "1", CH_IDX(0), PPS_OVP, SR_MQFLAG_DC },
 113         { "2", CH_IDX(1), PPS_OVP, SR_MQFLAG_DC },
 114         { "3", CH_IDX(2), PPS_OVP, SR_MQFLAG_DC },
 115 };
 116
 117 static const struct scpi_command bk_9130_cmd[] = {
 118         { SCPI_CMD_REMOTE, "SYST:REMOTE" },
 119         { SCPI_CMD_LOCAL, "SYST:LOCAL" },
 120         { SCPI_CMD_SELECT_CHANNEL, ":INST:NSEL %s" },
 121         { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" },
 122         { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" },
 123         { SCPI_CMD_GET_MEAS_POWER, ":MEAS:POWER?" },
 124         { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" },
 125         { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" },
 126         { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" },
 127         { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" },
 128         { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP?" },
 129         { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP 1" },
 130         { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP 0" },
 131         { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT?" },
 132         { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT %.6f" },
 133         ALL_ZERO
 134 };
 135
 136 /* Chroma 61600 series AC source */
 137 static const uint32_t chroma_61604_devopts[] = {
 138         SR_CONF_CONTINUOUS,
 139         SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
 140         SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
 141 };
 142
 143 static const uint32_t chroma_61604_devopts_cg[] = {
 144         SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
 145         SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
 146         SR_CONF_VOLTAGE | SR_CONF_GET,
 147         SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
 148         SR_CONF_OUTPUT_FREQUENCY | SR_CONF_GET,
 149         SR_CONF_OUTPUT_FREQUENCY_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
 150         SR_CONF_CURRENT | SR_CONF_GET,
 151         SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
 152 };
 153
 154 static const struct channel_spec chroma_61604_ch[] = {
 155         { "1", { 0, 300, 0.1, 1, 1 }, { 0, 16, 0.1, 2, 2 }, { 0, 2000, 0, 1, 1 }, { 1.0, 1000.0, 0.01 }, NO_OVP_LIMITS, NO_OCP_LIMITS },
 156 };
 157
 158 static const struct channel_group_spec chroma_61604_cg[] = {
 159         { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_AC },
 160 };
 161
 162 static const struct scpi_command chroma_61604_cmd[] = {
 163         { SCPI_CMD_REMOTE, "SYST:REM" },
 164         { SCPI_CMD_LOCAL, "SYST:LOC" },
 165         { SCPI_CMD_GET_MEAS_VOLTAGE, ":FETC:VOLT:ACDC?" },
 166         { SCPI_CMD_GET_MEAS_FREQUENCY, ":FETC:FREQ?" },
 167         { SCPI_CMD_GET_MEAS_CURRENT, ":FETC:CURR:AC?" },
 168         { SCPI_CMD_GET_MEAS_POWER, ":FETC:POW:AC?" },
 169         { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT:AC?" },
 170         { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT:AC %.1f" },
 171         { SCPI_CMD_GET_FREQUENCY_TARGET, ":SOUR:FREQ?" },
 172         { SCPI_CMD_SET_FREQUENCY_TARGET, ":SOUR:FREQ %.2f" },
 173         { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP?" },
 174         { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP ON" },
 175         { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP OFF" },
 176         { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:LIM:AC?" },
 177         { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:LIM:AC %.1f" },
 178         /* This is not a current limit mode. It is overcurrent protection. */
 179         { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:LIM?" },
 180         { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:LIM %.2f" },
 181         ALL_ZERO
 182 };
 183
 184 /* Chroma 62000 series DC source */
 185 static const uint32_t chroma_62000_devopts[] = {
 186         SR_CONF_CONTINUOUS,
 187         SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
 188         SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
 189 };
 190
 191 static const uint32_t chroma_62000_devopts_cg[] = {
 192         SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
 193         SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
 194         SR_CONF_VOLTAGE | SR_CONF_GET,
 195         SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
 196         SR_CONF_CURRENT | SR_CONF_GET,
 197         SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
 198         SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
 199 };
 200
 201 static const struct channel_group_spec chroma_62000_cg[] = {
 202         { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC },
 203 };
 204
 205 static const struct scpi_command chroma_62000_cmd[] = {
 206         { SCPI_CMD_REMOTE, ":CONF:REM ON" },
 207         { SCPI_CMD_LOCAL, ":CONF:REM OFF" },
 208         { SCPI_CMD_BEEPER, ":CONF:BEEP?" },
 209         { SCPI_CMD_BEEPER_ENABLE, ":CONF:BEEP ON" },
 210         { SCPI_CMD_BEEPER_DISABLE, ":CONF:BEEP OFF" },
 211         { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" },
 212         { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" },
 213         { SCPI_CMD_GET_MEAS_POWER, ":MEAS:POW?" },
 214         { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" },
 215         { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.2f" },
 216         { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" },
 217         { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" },
 218         { SCPI_CMD_GET_OUTPUT_ENABLED, ":CONF:OUTP?" },
 219         { SCPI_CMD_SET_OUTPUT_ENABLE, ":CONF:OUTP ON" },
 220         { SCPI_CMD_SET_OUTPUT_DISABLE, ":CONF:OUTP OFF" },
 221         { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT:HIGH?" },
 222         { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT:HIGH %.6f" },
 223         { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:PROT:HIGH?" },
 224         { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:PROT:HIGH %.6f" },
 225         ALL_ZERO
 226 };
 227
 228 static int chroma_62000p_probe_channels(struct sr_dev_inst *sdi,
 229                 struct sr_scpi_hw_info *hw_info,
 230                 struct channel_spec **channels, unsigned int *num_channels,
 231                 struct channel_group_spec **channel_groups,
 232                 unsigned int *num_channel_groups)
 233 {
 234         unsigned int volts, amps, watts;
 235         struct channel_spec *channel;
 236
 237         (void)sdi;
 238
 239         sscanf(hw_info->model, "620%uP-%u-%u", &watts, &volts, &amps);
 240         watts *= 100;
 241         sr_dbg("Found device rated for %d V, %d A and %d W", volts, amps, watts);
 242
 243         if (volts > 600) {
 244                 sr_err("Probed max voltage of %u V is out of spec.", volts);
 245                 return SR_ERR_BUG;
 246         }
 247
 248         if (amps > 120) {
 249                 sr_err("Probed max current of %u A is out of spec.", amps);
 250                 return SR_ERR_BUG;
 251         }
 252
 253         if (watts > 5000) {
 254                 sr_err("Probed max power of %u W is out of spec.", watts);
 255                 return SR_ERR_BUG;
 256         }
 257
 258         channel = g_malloc0(sizeof(struct channel_spec));
 259         channel->name = "1";
 260         channel->voltage[0] = channel->current[0] = channel->power[0] = 0.0;
 261         channel->voltage[1] = volts;
 262         channel->current[1] = amps;
 263         channel->power[1]   = watts;
 264         channel->voltage[2] = channel->current[2] = 0.01;
 265         channel->voltage[3] = channel->voltage[4] = 3;
 266         channel->current[3] = channel->current[4] = 4;
 267         *channels = channel;
 268         *num_channels = 1;
 269
 270         *channel_groups = g_malloc(sizeof(struct channel_group_spec));
 271         **channel_groups = chroma_62000_cg[0];
 272         *num_channel_groups = 1;
 273
 274         return SR_OK;
 275 }
 276
 277 /* Rigol DP700 series */
 278 static const uint32_t rigol_dp700_devopts[] = {
 279         SR_CONF_CONTINUOUS,
 280         SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
 281         SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
 282 };
 283
 284 static const uint32_t rigol_dp700_devopts_cg[] = {
 285         SR_CONF_REGULATION | SR_CONF_GET,
 286         SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
 287         SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET,
 288         SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
 289         SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
 290         SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | SR_CONF_GET,
 291         SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
 292         SR_CONF_VOLTAGE | SR_CONF_GET,
 293         SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
 294         SR_CONF_CURRENT | SR_CONF_GET,
 295         SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
 296         SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
 297 };
 298
 299 static const struct channel_spec rigol_dp711_ch[] = {
 300         { "1", { 0, 30, 0.01, 3, 3 }, { 0, 5, 0.01, 3, 3 }, { 0, 150, 0, 3, 3 }, FREQ_DC_ONLY, { 0.01, 33, 0.01}, { 0.01, 5.5, 0.01 } },
 301 };
 302
 303 static const struct channel_spec rigol_dp712_ch[] = {
 304         { "1", { 0, 50, 0.01, 3, 3 }, { 0, 3, 0.01, 3, 3 }, { 0, 150, 0, 3, 3 }, FREQ_DC_ONLY, { 0.01, 55, 0.01}, { 0.01, 3.3, 0.01 } },
 305 };
 306
 307 static const struct channel_group_spec rigol_dp700_cg[] = {
 308         { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC },
 309 };
 310
 311 /* Same as the DP800 series, except for the missing :SYST:OTP* commands. */
 312 static const struct scpi_command rigol_dp700_cmd[] = {
 313         { SCPI_CMD_REMOTE, "SYST:REMOTE" },
 314         { SCPI_CMD_LOCAL, "SYST:LOCAL" },
 315         { SCPI_CMD_BEEPER, "SYST:BEEP:STAT?" },
 316         { SCPI_CMD_BEEPER_ENABLE, "SYST:BEEP:STAT ON" },
 317         { SCPI_CMD_BEEPER_DISABLE, "SYST:BEEP:STAT OFF" },
 318         { SCPI_CMD_SELECT_CHANNEL, ":INST:NSEL %s" },
 319         { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" },
 320         { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" },
 321         { SCPI_CMD_GET_MEAS_POWER, ":MEAS:POWE?" },
 322         { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" },
 323         { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" },
 324         { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" },
 325         { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" },
 326         { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP?" },
 327         { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP ON" },
 328         { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP OFF" },
 329         { SCPI_CMD_GET_OUTPUT_REGULATION, ":OUTP:MODE?" },
 330         { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ENABLED, ":OUTP:OVP?" },
 331         { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_ENABLE, ":OUTP:OVP ON" },
 332         { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_DISABLE, ":OUTP:OVP OFF" },
 333         { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, ":OUTP:OVP:QUES?" },
 334         { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":OUTP:OVP:VAL?" },
 335         { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":OUTP:OVP:VAL %.6f" },
 336         { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ENABLED, ":OUTP:OCP?" },
 337         { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, ":OUTP:OCP:STAT ON" },
 338         { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, ":OUTP:OCP:STAT OFF" },
 339         { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, ":OUTP:OCP:QUES?" },
 340         { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":OUTP:OCP:VAL?" },
 341         { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":OUTP:OCP:VAL %.6f" },
 342         ALL_ZERO
 343 };
 344
 345 /* Rigol DP800 series */
 346 static const uint32_t rigol_dp800_devopts[] = {
 347         SR_CONF_CONTINUOUS,
 348         SR_CONF_OVER_TEMPERATURE_PROTECTION | SR_CONF_GET | SR_CONF_SET,
 349         SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
 350         SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
 351 };
 352
 353 static const uint32_t rigol_dp800_devopts_cg[] = {
 354         SR_CONF_REGULATION | SR_CONF_GET,
 355         SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
 356         SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET,
 357         SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
 358         SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
 359         SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | SR_CONF_GET,
 360         SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
 361         SR_CONF_VOLTAGE | SR_CONF_GET,
 362         SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
 363         SR_CONF_CURRENT | SR_CONF_GET,
 364         SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
 365         SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
 366 };
 367
 368 static const struct channel_spec rigol_dp821a_ch[] = {
 369         { "1", { 0, 60, 0.001, 3, 3 }, { 0, 1, 0.0001, 4, 4 }, { 0, 60, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
 370         { "2", { 0,  8, 0.001, 3, 3 }, { 0, 10, 0.001, 3, 3 }, { 0, 80, 0, 3, 3 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
 371 };
 372
 373 static const struct channel_spec rigol_dp831_ch[] = {
 374         { "1", { 0,   8, 0.001, 3, 4 }, { 0, 5, 0.0003, 3, 4 }, { 0, 40, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
 375         { "2", { 0,  30, 0.001, 3, 4 }, { 0, 2, 0.0001, 3, 4 }, { 0, 60, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
 376         { "3", { 0, -30, 0.001, 3, 4 }, { 0, 2, 0.0001, 3, 4 }, { 0, 60, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
 377 };
 378
 379 static const struct channel_spec rigol_dp832_ch[] = {
 380         { "1", { 0, 30, 0.001, 3, 4 }, { 0, 3, 0.001, 3, 4 }, { 0, 90, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
 381         { "2", { 0, 30, 0.001, 3, 4 }, { 0, 3, 0.001, 3, 4 }, { 0, 90, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
 382         { "3", { 0,  5, 0.001, 3, 4 }, { 0, 3, 0.001, 3, 4 }, { 0, 90, 0, 3, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
 383 };
 384
 385 static const struct channel_group_spec rigol_dp820_cg[] = {
 386         { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC },
 387         { "2", CH_IDX(1), PPS_OVP | PPS_OCP, SR_MQFLAG_DC },
 388 };
 389
 390 static const struct channel_group_spec rigol_dp830_cg[] = {
 391         { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC },
 392         { "2", CH_IDX(1), PPS_OVP | PPS_OCP, SR_MQFLAG_DC },
 393         { "3", CH_IDX(2), PPS_OVP | PPS_OCP, SR_MQFLAG_DC },
 394 };
 395
 396 static const struct scpi_command rigol_dp800_cmd[] = {
 397         { SCPI_CMD_REMOTE, "SYST:REMOTE" },
 398         { SCPI_CMD_LOCAL, "SYST:LOCAL" },
 399         { SCPI_CMD_BEEPER, "SYST:BEEP:STAT?" },
 400         { SCPI_CMD_BEEPER_ENABLE, "SYST:BEEP:STAT ON" },
 401         { SCPI_CMD_BEEPER_DISABLE, "SYST:BEEP:STAT OFF" },
 402         { SCPI_CMD_SELECT_CHANNEL, ":INST:NSEL %s" },
 403         { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" },
 404         { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" },
 405         { SCPI_CMD_GET_MEAS_POWER, ":MEAS:POWE?" },
 406         { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" },
 407         { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" },
 408         { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" },
 409         { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" },
 410         { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP?" },
 411         { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP ON" },
 412         { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP OFF" },
 413         { SCPI_CMD_GET_OUTPUT_REGULATION, ":OUTP:MODE?" },
 414         { SCPI_CMD_GET_OVER_TEMPERATURE_PROTECTION, ":SYST:OTP?" },
 415         { SCPI_CMD_SET_OVER_TEMPERATURE_PROTECTION_ENABLE, ":SYST:OTP ON" },
 416         { SCPI_CMD_SET_OVER_TEMPERATURE_PROTECTION_DISABLE, ":SYST:OTP OFF" },
 417         { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ENABLED, ":OUTP:OVP?" },
 418         { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_ENABLE, ":OUTP:OVP ON" },
 419         { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_DISABLE, ":OUTP:OVP OFF" },
 420         { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, ":OUTP:OVP:QUES?" },
 421         { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":OUTP:OVP:VAL?" },
 422         { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":OUTP:OVP:VAL %.6f" },
 423         { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ENABLED, ":OUTP:OCP?" },
 424         { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, ":OUTP:OCP:STAT ON" },
 425         { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, ":OUTP:OCP:STAT OFF" },
 426         { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, ":OUTP:OCP:QUES?" },
 427         { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":OUTP:OCP:VAL?" },
 428         { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":OUTP:OCP:VAL %.6f" },
 429         ALL_ZERO
 430 };
 431
 432 /* HP 663xA series */
 433 static const uint32_t hp_6630a_devopts[] = {
 434         SR_CONF_CONTINUOUS,
 435         SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
 436         SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
 437 };
 438
 439 static const uint32_t hp_6630a_devopts_cg[] = {
 440         SR_CONF_ENABLED | SR_CONF_SET,
 441         SR_CONF_VOLTAGE | SR_CONF_GET,
 442         SR_CONF_CURRENT | SR_CONF_GET,
 443         SR_CONF_VOLTAGE_TARGET | SR_CONF_SET | SR_CONF_LIST,
 444         SR_CONF_CURRENT_LIMIT | SR_CONF_SET | SR_CONF_LIST,
 445         SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET,
 446         SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_SET | SR_CONF_LIST,
 447         SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_SET,
 448         SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | SR_CONF_GET,
 449         SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE | SR_CONF_GET,
 450         SR_CONF_REGULATION | SR_CONF_GET,
 451 };
 452
 453 static const struct channel_spec hp_6632a_ch[] = {
 454         { "1", { 0, 20.475, 0.005, 3, 4 }, { 0, 5.1188, 0.00125, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY, { 0, 22, 0.1 }, NO_OCP_LIMITS },
 455 };
 456
 457 static const struct channel_spec hp_6633a_ch[] = {
 458         { "1", { 0, 51.188, 0.0125, 3, 4 }, { 0, 2.0475, 0.0005, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY, { 0, 55, 0.25 }, NO_OCP_LIMITS },
 459 };
 460
 461 static const struct channel_spec hp_6634a_ch[] = {
 462         { "1", { 0, 102.38, 0.025, 3, 4 }, { 0, 1.0238, 0.00025, 4, 5 }, { 0, 104.81664 }, FREQ_DC_ONLY, { 0, 110, 0.5 }, NO_OCP_LIMITS },
 463 };
 464
 465 static const struct channel_group_spec hp_6630a_cg[] = {
 466         { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC },
 467 };
 468
 469 static const struct scpi_command hp_6630a_cmd[] = {
 470         { SCPI_CMD_SET_OUTPUT_ENABLE, "OUT 1" },
 471         { SCPI_CMD_SET_OUTPUT_DISABLE, "OUT 0" },
 472         { SCPI_CMD_GET_MEAS_VOLTAGE, "VOUT?" },
 473         { SCPI_CMD_GET_MEAS_CURRENT, "IOUT?" },
 474         { SCPI_CMD_SET_VOLTAGE_TARGET, "VSET %.4f" },
 475         { SCPI_CMD_SET_CURRENT_LIMIT, "ISET %.4f" },
 476         { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, "STS?" },
 477         { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "OVSET %.4f" },
 478         { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, "OCP 1" },
 479         { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, "OCP 0" },
 480         { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, "STS?" },
 481         { SCPI_CMD_GET_OVER_TEMPERATURE_PROTECTION_ACTIVE, "STS?" },
 482         { SCPI_CMD_GET_OUTPUT_REGULATION, "STS?" },
 483         ALL_ZERO
 484 };
 485
 486 static int hp_6630a_init_acquisition(const struct sr_dev_inst *sdi)
 487 {
 488         struct sr_scpi_dev_inst *scpi;
 489
 490         scpi = sdi->conn;
 491
 492         /*
 493          * Monitor CV (1), CC+ (2), UR (4), OVP (8), OTP (16), OCP (64) and
 494          * CC- (256) bits of the Status Register for the FAULT? query.
 495          */
 496         return sr_scpi_send(scpi, "UNMASK 607");
 497 }
 498
 499 static int hp_6630a_update_status(const struct sr_dev_inst *sdi)
 500 {
 501         struct sr_scpi_dev_inst *scpi;
 502         int ret;
 503         int fault;
 504         gboolean cv, cc_pos, unreg, cc_neg;
 505         gboolean regulation_changed;
 506         char *regulation;
 507
 508         scpi = sdi->conn;
 509
 510         /*
 511          * Use the FAULT register (only 0->1 transitions), this way multiple set
 512          * regulation bits in the STS/ASTS registers are ignored. In rare cases
 513          * we will miss some changes (1->0 transitions, e.g. no regulation at all),
 514          * but SPS/ASPS doesn't work either, unless all states are stored and
 515          * compared to the states in STS/ASTS.
 516          * TODO: Use SPoll or SRQ when SCPI over GPIB is used.
 517          */
 518         ret = sr_scpi_get_int(scpi, "FAULT?", &fault);
 519         if (ret != SR_OK)
 520                 return ret;
 521
 522         /* OVP */
 523         if (fault & (1 << 3))
 524                 sr_session_send_meta(sdi, SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE,
 525                         g_variant_new_boolean(fault & (1 << 3)));
 526
 527         /* OCP */
 528         if (fault & (1 << 6))
 529                 sr_session_send_meta(sdi, SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE,
 530                         g_variant_new_boolean(fault & (1 << 6)));
 531
 532         /* OTP */
 533         if (fault & (1 << 4))
 534                 sr_session_send_meta(sdi, SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE,
 535                         g_variant_new_boolean(fault & (1 << 4)));
 536
 537         /* CV */
 538         cv = (fault & (1 << 0));
 539         regulation_changed = (fault & (1 << 0));
 540         /* CC+ */
 541         cc_pos = (fault & (1 << 1));
 542         regulation_changed = (fault & (1 << 1)) | regulation_changed;
 543         /* UNREG */
 544         unreg = (fault & (1 << 2));
 545         regulation_changed = (fault & (1 << 2)) | regulation_changed;
 546         /* CC- */
 547         cc_neg = (fault & (1 << 9));
 548         regulation_changed = (fault & (1 << 9)) | regulation_changed;
 549
 550         if (regulation_changed) {
 551                 if (cv && !cc_pos && !cc_neg && !unreg)
 552                         regulation = "CV";
 553                 else if (cc_pos && !cv && !cc_neg && !unreg)
 554                         regulation = "CC";
 555                 else if (cc_neg && !cv && !cc_pos && !unreg)
 556                         regulation = "CC-";
 557                 else if (unreg && !cv && !cc_pos && !cc_neg)
 558                         regulation = "UR";
 559                 else if (!cv && !cc_pos && !cc_neg && !unreg)
 560                         regulation = "";
 561                 else {
 562                         sr_dbg("Undefined regulation for HP 66xxA "
 563                                 "(CV=%i, CC+=%i, CC-=%i, UR=%i).",
 564                                 cv, cc_pos, cc_neg, unreg);
 565                         return FALSE;
 566                 }
 567                 sr_session_send_meta(sdi, SR_CONF_REGULATION,
 568                         g_variant_new_string(regulation));
 569         }
 570
 571         return SR_OK;
 572 }
 573
 574 /* HP 663xB series */
 575 static const uint32_t hp_6630b_devopts[] = {
 576         SR_CONF_CONTINUOUS,
 577         SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
 578         SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
 579 };
 580
 581 static const uint32_t hp_6630b_devopts_cg[] = {
 582         SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
 583         SR_CONF_VOLTAGE | SR_CONF_GET,
 584         SR_CONF_CURRENT | SR_CONF_GET,
 585         SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
 586         SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
 587         SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET,
 588         SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
 589         SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
 590         SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | SR_CONF_GET,
 591         SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE | SR_CONF_GET,
 592         SR_CONF_REGULATION | SR_CONF_GET,
 593 };
 594
 595 static const struct channel_spec hp_6611c_ch[] = {
 596         { "1", { 0, 8.19, 0.002, 3, 4 }, { 0, 5.1188, 0.00125, 4, 5 }, { 0, 41.92297 }, FREQ_DC_ONLY, { 0, 12, 0.06 }, NO_OCP_LIMITS },
 597 };
 598
 599 static const struct channel_spec hp_6612c_ch[] = {
 600         { "1", { 0, 20.475, 0.005, 3, 4 }, { 0, 2.0475, 0.0005, 4, 5 }, { 0, 41.92256 }, FREQ_DC_ONLY, { 0, 22, 0.1 }, NO_OCP_LIMITS },
 601 };
 602
 603 static const struct channel_spec hp_6613c_ch[] = {
 604         { "1", { 0, 51.188, 0.0125, 3, 4 }, { 0, 1.0238, 0.00025, 4, 5 }, { 0, 52.40627 }, FREQ_DC_ONLY, { 0, 55, 0.25 }, NO_OCP_LIMITS },
 605 };
 606
 607 static const struct channel_spec hp_6614c_ch[] = {
 608         { "1", { 0, 102.38, 0.025, 3, 4 }, { 0, 0.5118, 0.000125, 4, 5 }, { 0, 52.39808 }, FREQ_DC_ONLY, { 0, 110, 0.5 }, NO_OCP_LIMITS },
 609 };
 610
 611 static const struct channel_spec hp_6631b_ch[] = {
 612         { "1", { 0, 8.19, 0.002, 3, 4 }, { 0, 10.237, 0.00263, 4, 5 }, { 0, 83.84103 }, FREQ_DC_ONLY, { 0, 12, 0.06 }, NO_OCP_LIMITS },
 613 };
 614
 615 static const struct channel_spec hp_6632b_ch[] = {
 616         { "1", { 0, 20.475, 0.005, 3, 4 }, { 0, 5.1188, 0.00132, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY, { 0, 22, 0.1 }, NO_OCP_LIMITS },
 617 };
 618
 619 static const struct channel_spec hp_66312a_ch[] = {
 620         { "1", { 0, 20.475, 0.0001, 4, 5 }, { 0, 2.0475, 0.0001, 4, 5 }, { 0, 41.92256 }, FREQ_DC_ONLY, { 0, 22, 0.01 }, NO_OCP_LIMITS },
 621 };
 622
 623 static const struct channel_spec hp_66332a_ch[] = {
 624         { "1", { 0, 20.475, 0.005, 3, 4 }, { 0, 5.1188, 0.00132, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY, { 0, 22, 0.1 }, NO_OCP_LIMITS },
 625 };
 626
 627 static const struct channel_spec hp_6633b_ch[] = {
 628         { "1", { 0, 51.188, 0.0125, 3, 4 }, { 0, 2.0475, 0.000526, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY, { 0, 55, 0.25 }, NO_OCP_LIMITS },
 629 };
 630
 631 static const struct channel_spec hp_6634b_ch[] = {
 632         { "1", { 0, 102.38, 0.025, 3, 4 }, { 0, 1.0238, 0.000263, 4, 5 }, { 0, 104.81664 }, FREQ_DC_ONLY, { 0, 110, 0.5 }, NO_OCP_LIMITS },
 633 };
 634
 635 static const struct channel_group_spec hp_6630b_cg[] = {
 636         { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC },
 637 };
 638
 639 static const struct scpi_command hp_6630b_cmd[] = {
 640         /*
 641          * SCPI_CMD_REMOTE and SCPI_CMD_LOCAL are not used when GPIB is used,
 642          * otherwise the device will report (non critical) error 602.
 643          */
 644         { SCPI_CMD_REMOTE, "SYST:REM" },
 645         { SCPI_CMD_LOCAL, "SYST:LOC" },
 646         { SCPI_CMD_GET_OUTPUT_ENABLED, "OUTP:STAT?" },
 647         { SCPI_CMD_SET_OUTPUT_ENABLE, "OUTP:STAT ON" },
 648         { SCPI_CMD_SET_OUTPUT_DISABLE, "OUTP:STAT OFF" },
 649         { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" },
 650         { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" },
 651         { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" },
 652         { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" },
 653         { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" },
 654         { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" },
 655         { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ENABLED, ":CURR:PROT:STAT?" },
 656         { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, ":CURR:PROT:STAT 1" },
 657         { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, ":CURR:PROT:STAT 0" },
 658         { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, "STAT:QUES:COND?" },
 659         { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, "STAT:QUES:COND?" },
 660         { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":VOLT:PROT?" },
 661         { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":VOLT:PROT %.6f" },
 662         { SCPI_CMD_GET_OVER_TEMPERATURE_PROTECTION_ACTIVE, "STAT:QUES:COND?" },
 663         { SCPI_CMD_GET_OUTPUT_REGULATION, "STAT:OPER:COND?" },
 664         ALL_ZERO
 665 };
 666
 667 static int hp_6630b_init_acquisition(const struct sr_dev_inst *sdi)
 668 {
 669         struct sr_scpi_dev_inst *scpi;
 670         int ret;
 671
 672         scpi = sdi->conn;
 673
 674         /*
 675          * Monitor CV (256), CC+ (1024) and CC- (2048) bits of the
 676          * Operational Status Register.
 677          * Use both positive and negative transitions of the status bits.
 678          */
 679         ret = sr_scpi_send(scpi, "STAT:OPER:PTR 3328;NTR 3328;ENAB 3328");
 680         if (ret != SR_OK)
 681                 return ret;
 682
 683         /*
 684          * Monitor OVP (1), OCP (2), OTP (16) and Unreg (1024) bits of the
 685          * Questionable Status Register.
 686          * Use both positive and negative transitions of the status bits.
 687          */
 688         ret = sr_scpi_send(scpi, "STAT:QUES:PTR 1043;NTR 1043;ENAB 1043");
 689         if (ret != SR_OK)
 690                 return ret;
 691
 692         /*
 693          * Service Request Enable Register set for Operational Status Register
 694          * bits (128) and Questionable Status Register bits (8).
 695          * This masks the Status Register generating a SRQ/RQS. Not implemented yet!
 696          */
 697         /*
 698         ret = sr_scpi_send(scpi, "*SRE 136");
 699         if (ret != SR_OK)
 700                 return ret;
 701         */
 702
 703         return SR_OK;
 704 }
 705
 706 static int hp_6630b_update_status(const struct sr_dev_inst *sdi)
 707 {
 708         struct sr_scpi_dev_inst *scpi;
 709         int ret;
 710         int stb;
 711         int ques_even, ques_cond;
 712         int oper_even, oper_cond;
 713         gboolean output_enabled;
 714         gboolean unreg, cv, cc_pos, cc_neg;
 715         gboolean regulation_changed;
 716         char *regulation;
 717
 718         scpi = sdi->conn;
 719
 720         unreg = FALSE;
 721         cv = FALSE;
 722         cc_pos = FALSE;
 723         cc_neg = FALSE;
 724         regulation_changed = FALSE;
 725
 726         /*
 727          * Use SPoll when SCPI uses GPIB as transport layer.
 728          * SPoll is approx. twice as fast as a normal GPIB write + read would be!
 729          */
 730 #ifdef HAVE_LIBGPIB
 731         char spoll_buf;
 732
 733         if (scpi->transport == SCPI_TRANSPORT_LIBGPIB) {
 734                 ret = sr_scpi_gpib_spoll(scpi, &spoll_buf);
 735                 if (ret != SR_OK)
 736                         return ret;
 737                 stb = (uint8_t)spoll_buf;
 738         }
 739         else {
 740 #endif
 741                 ret = sr_scpi_get_int(scpi, "*STB?", &stb);
 742                 if (ret != SR_OK)
 743                         return ret;
 744 #ifdef HAVE_LIBGPIB
 745         }
 746 #endif
 747
 748         /* Questionable status summary bit */
 749         if (stb & (1 << 3)) {
 750                 /* Read the event register to clear it! */
 751                 ret = sr_scpi_get_int(scpi, "STAT:QUES:EVEN?", &ques_even);
 752                 if (ret != SR_OK)
 753                         return ret;
 754                 /* Now get the values. */
 755                 ret = sr_scpi_get_int(scpi, "STAT:QUES:COND?", &ques_cond);
 756                 if (ret != SR_OK)
 757                         return ret;
 758
 759                 /* OVP */
 760                 if (ques_even & (1 << 0))
 761                         sr_session_send_meta(sdi, SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE,
 762                                 g_variant_new_boolean(ques_cond & (1 << 0)));
 763
 764                 /* OCP */
 765                 if (ques_even & (1 << 1))
 766                         sr_session_send_meta(sdi, SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE,
 767                                 g_variant_new_boolean(ques_cond & (1 << 1)));
 768
 769                 /* OTP */
 770                 if (ques_even & (1 << 4))
 771                         sr_session_send_meta(sdi, SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE,
 772                                 g_variant_new_boolean(ques_cond & (1 << 4)));
 773
 774                 /* UNREG */
 775                 unreg = (ques_cond & (1 << 10));
 776                 regulation_changed = (ques_even & (1 << 10)) | regulation_changed;
 777
 778                 /*
 779                  * Check if output state has changed, due to one of the
 780                  * questionable states changed.
 781                  * NOTE: The output state is sent even if it hasn't changed,
 782                  * but that only happens rarely.
 783                  */
 784                 ret = sr_scpi_get_bool(scpi, "OUTP:STAT?", &output_enabled);
 785                 if (ret != SR_OK)
 786                         return ret;
 787                 sr_session_send_meta(sdi, SR_CONF_ENABLED,
 788                         g_variant_new_boolean(output_enabled));
 789         }
 790
 791         /* Operation status summary bit */
 792         if (stb & (1 << 7)) {
 793                 /* Read the event register to clear it! */
 794                 ret = sr_scpi_get_int(scpi, "STAT:OPER:EVEN?", &oper_even);
 795                 if (ret != SR_OK)
 796                         return ret;
 797                 /* Now get the values. */
 798                 ret = sr_scpi_get_int(scpi, "STAT:OPER:COND?", &oper_cond);
 799                 if (ret != SR_OK)
 800                         return ret;
 801
 802                 /* CV */
 803                 cv = (oper_cond & (1 << 8));
 804                 regulation_changed = (oper_even & (1 << 8)) | regulation_changed;
 805                 /* CC+ */
 806                 cc_pos = (oper_cond & (1 << 10));
 807                 regulation_changed = (oper_even & (1 << 10)) | regulation_changed;
 808                 /* CC- */
 809                 cc_neg = (oper_cond & (1 << 11));
 810                 regulation_changed = (oper_even & (1 << 11)) | regulation_changed;
 811         }
 812
 813         if (regulation_changed) {
 814                 if (cv && !cc_pos && !cc_neg && !unreg)
 815                         regulation = "CV";
 816                 else if (cc_pos && !cv && !cc_neg && !unreg)
 817                         regulation = "CC";
 818                 else if (cc_neg && !cv && !cc_pos && !unreg)
 819                         regulation = "CC-";
 820                 else if (unreg && !cv && !cc_pos && !cc_neg)
 821                         regulation = "UR";
 822                 else if (!cv && !cc_pos && !cc_neg && !unreg)
 823                         /* This happens in case of OCP active. */
 824                         regulation = "";
 825                 else {
 826                         /* This happens from time to time (CV and CC+ active). */
 827                         sr_dbg("Undefined regulation for HP 66xxB "
 828                                 "(CV=%i, CC+=%i, CC-=%i, UR=%i).",
 829                                 cv, cc_pos, cc_neg, unreg);
 830                         return FALSE;
 831                 }
 832                 sr_session_send_meta(sdi, SR_CONF_REGULATION,
 833                         g_variant_new_string(regulation));
 834         }
 835
 836         return SR_OK;
 837 }
 838
 839 /* Owon P4000 series */
 840 static const uint32_t owon_p4000_devopts[] = {
 841         SR_CONF_CONTINUOUS,
 842         SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
 843         SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET
 844 };
 845
 846 static const uint32_t owon_p4000_devopts_cg[] = {
 847         SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
 848         SR_CONF_VOLTAGE | SR_CONF_GET,
 849         SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
 850         SR_CONF_CURRENT | SR_CONF_GET,
 851         SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
 852         SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
 853         SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
 854 };
 855
 856 static const struct channel_spec owon_p4603_ch[] = {
 857         { "1", { 0.01, 60, 0.001, 3, 3 }, { 0.001, 3, 0.001, 3, 3 }, { 0, 180, 0, 3, 3 }, FREQ_DC_ONLY, { 0.01, 61, 0.001}, { 0.001, 3.1, 0.001} },
 858 };
 859
 860 static const struct channel_spec owon_p4305_ch[] = {
 861         { "1", { 0.01, 30, 0.001, 3, 3 }, { 0.001, 5, 0.001, 3, 3 }, { 0, 180, 0, 3, 3 }, FREQ_DC_ONLY, { 0.01, 31, 0.001}, { 0.001, 3.1, 0.001} },
 862 };
 863
 864 static const struct channel_group_spec owon_p4000_cg[] = {
 865         { "1", CH_IDX(0), PPS_OVP | PPS_OCP, SR_MQFLAG_DC },
 866 };
 867
 868 static const struct scpi_command owon_p4000_cmd[] = {
 869         { SCPI_CMD_GET_MEAS_VOLTAGE, "MEAS:VOLT?" },
 870         { SCPI_CMD_GET_MEAS_CURRENT, "MEAS:CURR?" },
 871         { SCPI_CMD_GET_MEAS_POWER, "MEAS:POW?" },
 872         { SCPI_CMD_GET_VOLTAGE_TARGET, "VOLT?" },
 873         { SCPI_CMD_SET_VOLTAGE_TARGET, "VOLT %.6f" },
 874         { SCPI_CMD_GET_CURRENT_LIMIT, "CURR?" },
 875         { SCPI_CMD_SET_CURRENT_LIMIT, "CURR %.6f" },
 876         { SCPI_CMD_GET_OUTPUT_ENABLED, "OUTP?" },
 877         { SCPI_CMD_SET_OUTPUT_ENABLE, "OUTP 1" },
 878         { SCPI_CMD_SET_OUTPUT_DISABLE, "OUTP 0" },
 879         { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:LIM?" },
 880         { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:LIM %.6f" },
 881         { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, "CURR:LIM?" },
 882         { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, "CURR:LIM %.6f" },
 883         ALL_ZERO
 884 };
 885
 886 /* Philips/Fluke PM2800 series */
 887 static const uint32_t philips_pm2800_devopts[] = {
 888         SR_CONF_CONTINUOUS,
 889         SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
 890         SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
 891 };
 892
 893 static const uint32_t philips_pm2800_devopts_cg[] = {
 894         SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
 895         SR_CONF_VOLTAGE | SR_CONF_GET,
 896         SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
 897         SR_CONF_CURRENT | SR_CONF_GET,
 898         SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
 899         SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET,
 900         SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
 901         SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
 902         SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | SR_CONF_GET,
 903         SR_CONF_REGULATION | SR_CONF_GET,
 904 };
 905
 906 enum philips_pm2800_modules {
 907         PM2800_MOD_30V_10A = 1,
 908         PM2800_MOD_60V_5A,
 909         PM2800_MOD_60V_10A,
 910         PM2800_MOD_8V_15A,
 911         PM2800_MOD_60V_2A,
 912         PM2800_MOD_120V_1A,
 913 };
 914
 915 static const struct philips_pm2800_module_spec {
 916         /* Min, max, programming resolution. */
 917         double voltage[5];
 918         double current[5];
 919         double power[5];
 920 } philips_pm2800_module_specs[] = {
 921         /* Autoranging modules. */
 922         [PM2800_MOD_30V_10A] = { { 0, 30, 0.0075, 2, 4 }, { 0, 10, 0.0025, 2, 4 }, { 0, 60 } },
 923         [PM2800_MOD_60V_5A] = { { 0, 60, 0.015, 2, 3 }, { 0, 5, 0.00125, 2, 5 }, { 0, 60 } },
 924         [PM2800_MOD_60V_10A] = { { 0, 60, 0.015, 2, 3 }, { 0, 10, 0.0025, 2, 5 }, { 0, 120 } },
 925         /* Linear modules. */
 926         [PM2800_MOD_8V_15A] = { { 0, 8, 0.002, 3, 3 }, { -15, 15, 0.00375, 3, 5 }, { 0, 120 } },
 927         [PM2800_MOD_60V_2A] = { { 0, 60, 0.015, 2, 3 }, { -2, 2, 0.0005, 3, 4 }, { 0, 120 } },
 928         [PM2800_MOD_120V_1A] = { { 0, 120, 0.030, 2, 2 }, { -1, 1, 0.00025, 3, 5 }, { 0, 120 } },
 929 };
 930
 931 static const struct philips_pm2800_model {
 932         unsigned int chassis;
 933         unsigned int num_modules;
 934         unsigned int set;
 935         unsigned int modules[3];
 936 } philips_pm2800_matrix[] = {
 937         /* Autoranging chassis. */
 938         { 1, 1, 0, { PM2800_MOD_30V_10A, 0, 0 } },
 939         { 1, 1, 1, { PM2800_MOD_60V_5A, 0, 0 } },
 940         { 1, 2, 0, { PM2800_MOD_30V_10A, PM2800_MOD_30V_10A, 0 } },
 941         { 1, 2, 1, { PM2800_MOD_60V_5A, PM2800_MOD_60V_5A, 0 } },
 942         { 1, 2, 2, { PM2800_MOD_30V_10A, PM2800_MOD_60V_5A, 0 } },
 943         { 1, 2, 3, { PM2800_MOD_30V_10A, PM2800_MOD_60V_10A, 0 } },
 944         { 1, 2, 4, { PM2800_MOD_60V_5A, PM2800_MOD_60V_10A, 0 } },
 945         { 1, 3, 0, { PM2800_MOD_30V_10A, PM2800_MOD_30V_10A, PM2800_MOD_30V_10A } },
 946         { 1, 3, 1, { PM2800_MOD_60V_5A, PM2800_MOD_60V_5A, PM2800_MOD_60V_5A } },
 947         { 1, 3, 2, { PM2800_MOD_30V_10A, PM2800_MOD_30V_10A, PM2800_MOD_60V_5A } },
 948         { 1, 3, 3, { PM2800_MOD_30V_10A, PM2800_MOD_60V_5A, PM2800_MOD_60V_5A } },
 949         /* Linear chassis. */
 950         { 3, 1, 0, { PM2800_MOD_60V_2A, 0, 0 } },
 951         { 3, 1, 1, { PM2800_MOD_120V_1A, 0, 0 } },
 952         { 3, 1, 2, { PM2800_MOD_8V_15A, 0, 0 } },
 953         { 3, 2, 0, { PM2800_MOD_60V_2A, 0, 0 } },
 954         { 3, 2, 1, { PM2800_MOD_120V_1A, 0, 0 } },
 955         { 3, 2, 2, { PM2800_MOD_60V_2A, PM2800_MOD_120V_1A, 0 } },
 956         { 3, 2, 3, { PM2800_MOD_8V_15A, PM2800_MOD_8V_15A, 0 } },
 957 };
 958
 959 static const char *philips_pm2800_names[] = { "1", "2", "3" };
 960
 961 static int philips_pm2800_probe_channels(struct sr_dev_inst *sdi,
 962                 struct sr_scpi_hw_info *hw_info,
 963                 struct channel_spec **channels, unsigned int *num_channels,
 964                 struct channel_group_spec **channel_groups, unsigned int *num_channel_groups)
 965 {
 966         const struct philips_pm2800_model *model;
 967         const struct philips_pm2800_module_spec *spec;
 968         unsigned int chassis, num_modules, set, module, m, i;
 969
 970         (void)sdi;
 971
 972         /*
 973          * The model number as reported by *IDN? looks like e.g. PM2813/11,
 974          * Where "PM28" is fixed, followed by the chassis code (1 = autoranging,
 975          * 3 = linear series) and the number of modules: 1-3 for autoranging,
 976          * 1-2 for linear.
 977          * After the slash, the first digit denotes the module set. The
 978          * digit after that denotes front (5) or rear (1) binding posts.
 979          */
 980         chassis = hw_info->model[4] - 0x30;
 981         num_modules = hw_info->model[5] - 0x30;
 982         set = hw_info->model[7] - 0x30;
 983         for (m = 0; m < ARRAY_SIZE(philips_pm2800_matrix); m++) {
 984                 model = &philips_pm2800_matrix[m];
 985                 if (model->chassis == chassis && model->num_modules == num_modules
 986                                 && model->set == set)
 987                         break;
 988         }
 989         if (m == ARRAY_SIZE(philips_pm2800_matrix)) {
 990                 sr_dbg("Model %s not found in matrix.", hw_info->model);
 991                 return SR_ERR;
 992         }
 993
 994         sr_dbg("Found %d output channel%s:", num_modules, num_modules > 1 ? "s" : "");
 995         *channels = g_malloc0(sizeof(struct channel_spec) * num_modules);
 996         *channel_groups = g_malloc0(sizeof(struct channel_group_spec) * num_modules);
 997         for (i = 0; i < num_modules; i++) {
 998                 module = model->modules[i];
 999                 spec = &philips_pm2800_module_specs[module];
1000                 sr_dbg("output %d: %.0f - %.0fV, %.0f - %.0fA, %.0f - %.0fW", i + 1,
1001                                 spec->voltage[0], spec->voltage[1],
1002                                 spec->current[0], spec->current[1],
1003                                 spec->power[0], spec->power[1]);
1004                 (*channels)[i].name = (char *)philips_pm2800_names[i];
1005                 memcpy(&((*channels)[i].voltage), spec, sizeof(double) * 15);
1006                 (*channel_groups)[i].name = (char *)philips_pm2800_names[i];
1007                 (*channel_groups)[i].channel_index_mask = 1 << i;
1008                 (*channel_groups)[i].features = PPS_OTP | PPS_OVP | PPS_OCP;
1009                 (*channel_groups)[i].mqflags = SR_MQFLAG_DC;
1010         }
1011         *num_channels = *num_channel_groups = num_modules;
1012
1013         return SR_OK;
1014 }
1015
1016 static const struct scpi_command philips_pm2800_cmd[] = {
1017         { SCPI_CMD_SELECT_CHANNEL, ":INST:NSEL %s" },
1018         { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" },
1019         { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" },
1020         { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" },
1021         { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" },
1022         { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" },
1023         { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" },
1024         { SCPI_CMD_GET_OUTPUT_ENABLED, ":OUTP?" },
1025         { SCPI_CMD_SET_OUTPUT_ENABLE, ":OUTP ON" },
1026         { SCPI_CMD_SET_OUTPUT_DISABLE, ":OUTP OFF" },
1027         { SCPI_CMD_GET_OUTPUT_REGULATION, ":SOUR:FUNC:MODE?" },
1028         { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, ":SOUR:VOLT:PROT:TRIP?" },
1029         { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT:LEV?" },
1030         { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT:LEV %.6f" },
1031         { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ENABLED, ":SOUR:CURR:PROT:STAT?" },
1032         { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, ":SOUR:CURR:PROT:STAT ON" },
1033         { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, ":SOUR:CURR:PROT:STAT OFF" },
1034         { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, ":SOUR:CURR:PROT:TRIP?" },
1035         ALL_ZERO
1036 };
1037
1038 static const uint32_t rs_hmc8043_devopts[] = {
1039         SR_CONF_CONTINUOUS,
1040         SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
1041         SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
1042 };
1043
1044 static const uint32_t rs_hmc8043_devopts_cg[] = {
1045         SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
1046         SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET,
1047         SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
1048         SR_CONF_VOLTAGE | SR_CONF_GET,
1049         SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
1050         SR_CONF_CURRENT | SR_CONF_GET,
1051         SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
1052         SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
1053 };
1054
1055 static const struct channel_spec rs_hmc8043_ch[] = {
1056         { "1", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 3, 0.001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
1057         { "2", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 3, 0.001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
1058         { "3", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 3, 0.001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
1059 };
1060
1061 static const struct channel_group_spec rs_hmc8043_cg[] = {
1062         { "1", CH_IDX(0), PPS_OVP, SR_MQFLAG_DC },
1063         { "2", CH_IDX(1), PPS_OVP, SR_MQFLAG_DC },
1064         { "3", CH_IDX(2), PPS_OVP, SR_MQFLAG_DC },
1065 };
1066
1067 static const struct scpi_command rs_hmc8043_cmd[] = {
1068         { SCPI_CMD_SELECT_CHANNEL, "INST:NSEL %s" },
1069         { SCPI_CMD_GET_MEAS_VOLTAGE, "MEAS:VOLT?" },
1070         { SCPI_CMD_GET_MEAS_CURRENT, "MEAS:CURR?" },
1071         { SCPI_CMD_GET_VOLTAGE_TARGET, "VOLT?" },
1072         { SCPI_CMD_SET_VOLTAGE_TARGET, "VOLT %.6f" },
1073         { SCPI_CMD_GET_CURRENT_LIMIT, "CURR?" },
1074         { SCPI_CMD_SET_CURRENT_LIMIT, "CURR %.6f" },
1075         { SCPI_CMD_GET_OUTPUT_ENABLED, "OUTP?" },
1076         { SCPI_CMD_SET_OUTPUT_ENABLE, "OUTP ON" },
1077         { SCPI_CMD_SET_OUTPUT_DISABLE, "OUTP OFF" },
1078         { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, "VOLT:PROT:TRIP?" },
1079         { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:PROT:LEV?" },
1080         { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:PROT:LEV %.6f" },
1081         { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ENABLED, "VOLT:PROT:STAT?" },
1082         { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_ENABLE, "VOLT:PROT:STAT ON" },
1083         { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_DISABLE, "VOLT:PROT:STAT OFF" },
1084         ALL_ZERO
1085 };
1086
1087 static const uint32_t rs_hmp4040_devopts[] = {
1088         SR_CONF_CONTINUOUS,
1089         SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
1090         SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
1091 };
1092
1093 static const uint32_t rs_hmp4040_devopts_cg[] = {
1094         SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED | SR_CONF_GET,
1095         SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET,
1096         SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET,
1097         SR_CONF_VOLTAGE | SR_CONF_GET,
1098         SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
1099         SR_CONF_CURRENT | SR_CONF_GET,
1100         SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
1101         SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
1102         SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE | SR_CONF_GET,
1103         SR_CONF_REGULATION | SR_CONF_GET,
1104 };
1105
1106 static const struct channel_spec rs_hmp2020_ch[] = {
1107         { "1", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 10.01, 0.0002, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
1108         { "2", { 0, 32.050, 0.001, 3, 4 }, { 0.001,  5.01, 0.0001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
1109 };
1110
1111 static const struct channel_spec rs_hmp2030_ch[] = {
1112         { "1", { 0, 32.050, 0.001, 3, 4 }, { 0.001,  5.01, 0.0001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
1113         { "2", { 0, 32.050, 0.001, 3, 4 }, { 0.001,  5.01, 0.0001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
1114         { "3", { 0, 32.050, 0.001, 3, 4 }, { 0.001,  5.01, 0.0001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
1115 };
1116
1117 static const struct channel_spec rs_hmp4040_ch[] = {
1118         { "1", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 10.01, 0.0002, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
1119         { "2", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 10.01, 0.0002, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
1120         { "3", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 10.01, 0.0002, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
1121         { "4", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 10.01, 0.0002, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS },
1122 };
1123
1124 static const struct channel_group_spec rs_hmp4040_cg[] = {
1125         { "1", CH_IDX(0), PPS_OVP | PPS_OTP, SR_MQFLAG_DC },
1126         { "2", CH_IDX(1), PPS_OVP | PPS_OTP, SR_MQFLAG_DC },
1127         { "3", CH_IDX(2), PPS_OVP | PPS_OTP, SR_MQFLAG_DC },
1128         { "4", CH_IDX(3), PPS_OVP | PPS_OTP, SR_MQFLAG_DC },
1129 };
1130
1131 /*
1132  * Developer's note: Currently unused device commands. Some of them
1133  * are not in use because SCPI_CMD codes are not defined yet.
1134  *   OUTP:GEN
1135  *   VOLT? MAX, CURR? MAX
1136  *   VOLT:PROT:CLE (could set SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE)
1137  *   VOLT:PROT:MODE
1138  *   FUSE:STAT, FUSE:TRIP?, FUSE:LINK, FUSE:UNL
1139  *   ARB:...
1140  *   SYST:LOC, SYST:REM, SYST:RWL, SYST:MIX
1141  *   SYST:BEEP:IMM
1142  */
1143 static const struct scpi_command rs_hmp4040_cmd[] = {
1144         { SCPI_CMD_REMOTE, "SYST:REM" },
1145         { SCPI_CMD_LOCAL, "SYST:LOC" },
1146         { SCPI_CMD_SELECT_CHANNEL, "INST:NSEL %s" },
1147         { SCPI_CMD_GET_MEAS_VOLTAGE, "MEAS:VOLT?" },
1148         { SCPI_CMD_GET_MEAS_CURRENT, "MEAS:CURR?" },
1149         { SCPI_CMD_GET_VOLTAGE_TARGET, "VOLT?" },
1150         { SCPI_CMD_SET_VOLTAGE_TARGET, "VOLT %.6f" },
1151         { SCPI_CMD_GET_CURRENT_LIMIT, "CURR?" },
1152         { SCPI_CMD_SET_CURRENT_LIMIT, "CURR %.6f" },
1153         { SCPI_CMD_GET_OUTPUT_ENABLED, "OUTP?" },
1154         { SCPI_CMD_SET_OUTPUT_ENABLE, "OUTP ON" },
1155         { SCPI_CMD_SET_OUTPUT_DISABLE, "OUTP OFF" },
1156         { SCPI_CMD_GET_OUTPUT_REGULATION, "STAT:QUES:INST:ISUM%s:COND?" },
1157         { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, "VOLT:PROT:TRIP?" },
1158         { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:PROT:LEV?" },
1159         { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:PROT:LEV %.6f" },
1160         { SCPI_CMD_GET_OVER_TEMPERATURE_PROTECTION_ACTIVE, "STAT:QUES:INST:ISUM%s:COND?" },
1161         ALL_ZERO
1162 };
1163
1164 SR_PRIV const struct scpi_pps pps_profiles[] = {
1165         /* Agilent N5763A */
1166         { "Agilent", "N5763A", SCPI_DIALECT_UNKNOWN, 0,
1167                 ARRAY_AND_SIZE(agilent_n5700a_devopts),
1168                 ARRAY_AND_SIZE(agilent_n5700a_devopts_cg),
1169                 ARRAY_AND_SIZE(agilent_n5763a_ch),
1170                 ARRAY_AND_SIZE(agilent_n5700a_cg),
1171                 agilent_n5700a_cmd,
1172                 .probe_channels = NULL,
1173                 .init_acquisition = NULL,
1174                 .update_status = NULL,
1175         },
1176
1177         /* Agilent N5767A */
1178         { "Agilent", "N5767A", SCPI_DIALECT_UNKNOWN, 0,
1179                 ARRAY_AND_SIZE(agilent_n5700a_devopts),
1180                 ARRAY_AND_SIZE(agilent_n5700a_devopts_cg),
1181                 ARRAY_AND_SIZE(agilent_n5767a_ch),
1182                 ARRAY_AND_SIZE(agilent_n5700a_cg),
1183                 agilent_n5700a_cmd,
1184                 .probe_channels = NULL,
1185                 .init_acquisition = NULL,
1186                 .update_status = NULL,
1187         },
1188
1189         /* BK Precision 9310 */
1190         { "BK", "^9130$", SCPI_DIALECT_UNKNOWN, 0,
1191                 ARRAY_AND_SIZE(bk_9130_devopts),
1192                 ARRAY_AND_SIZE(bk_9130_devopts_cg),
1193                 ARRAY_AND_SIZE(bk_9130_ch),
1194                 ARRAY_AND_SIZE(bk_9130_cg),
1195                 bk_9130_cmd,
1196                 .probe_channels = NULL,
1197                 .init_acquisition = NULL,
1198                 .update_status = NULL,
1199         },
1200
1201         /* Chroma 61604 */
1202         { "Chroma", "61604", SCPI_DIALECT_UNKNOWN, 0,
1203                 ARRAY_AND_SIZE(chroma_61604_devopts),
1204                 ARRAY_AND_SIZE(chroma_61604_devopts_cg),
1205                 ARRAY_AND_SIZE(chroma_61604_ch),
1206                 ARRAY_AND_SIZE(chroma_61604_cg),
1207                 chroma_61604_cmd,
1208                 .probe_channels = NULL,
1209                 .init_acquisition = NULL,
1210                 .update_status = NULL,
1211         },
1212
1213         /* Chroma 62000 series */
1214         { "Chroma", "620[0-9]{2}P-[0-9]{2,3}-[0-9]{1,3}", SCPI_DIALECT_UNKNOWN, 0,
1215                 ARRAY_AND_SIZE(chroma_62000_devopts),
1216                 ARRAY_AND_SIZE(chroma_62000_devopts_cg),
1217                 NULL, 0,
1218                 NULL, 0,
1219                 chroma_62000_cmd,
1220                 .probe_channels = chroma_62000p_probe_channels,
1221                 .init_acquisition = NULL,
1222                 .update_status = NULL,
1223         },
1224
1225         /*
1226          * This entry is for testing the HP COMP language with a HP 6632B power
1227          * supply switched to the COMP language ("SYST:LANG COMP"). When used,
1228          * disable the entry for the HP 6632B below!
1229          */
1230         /*
1231         { "HP", "6632B", SCPI_DIALECT_HP_COMP, 0,
1232                 ARRAY_AND_SIZE(hp_6630a_devopts),
1233                 ARRAY_AND_SIZE(hp_6630a_devopts_cg),
1234                 ARRAY_AND_SIZE(hp_6632a_ch),
1235                 ARRAY_AND_SIZE(hp_6630a_cg),
1236                 hp_6630a_cmd,
1237                 .probe_channels = NULL,
1238                 hp_6630a_init_acquisition,
1239                 hp_6630a_update_status,
1240         },
1241         */
1242
1243         /* HP 6632A */
1244         { "HP", "6632A", SCPI_DIALECT_HP_COMP, 0,
1245                 ARRAY_AND_SIZE(hp_6630a_devopts),
1246                 ARRAY_AND_SIZE(hp_6630a_devopts_cg),
1247                 ARRAY_AND_SIZE(hp_6632a_ch),
1248                 ARRAY_AND_SIZE(hp_6630a_cg),
1249                 hp_6630a_cmd,
1250                 .probe_channels = NULL,
1251                 hp_6630a_init_acquisition,
1252                 hp_6630a_update_status,
1253         },
1254
1255         /* HP 6633A */
1256         { "HP", "6633A", SCPI_DIALECT_HP_COMP, 0,
1257                 ARRAY_AND_SIZE(hp_6630a_devopts),
1258                 ARRAY_AND_SIZE(hp_6630a_devopts_cg),
1259                 ARRAY_AND_SIZE(hp_6633a_ch),
1260                 ARRAY_AND_SIZE(hp_6630a_cg),
1261                 hp_6630a_cmd,
1262                 .probe_channels = NULL,
1263                 hp_6630a_init_acquisition,
1264                 hp_6630a_update_status,
1265         },
1266
1267         /* HP 6634A */
1268         { "HP", "6634A", SCPI_DIALECT_HP_COMP, 0,
1269                 ARRAY_AND_SIZE(hp_6630a_devopts),
1270                 ARRAY_AND_SIZE(hp_6630a_devopts_cg),
1271                 ARRAY_AND_SIZE(hp_6634a_ch),
1272                 ARRAY_AND_SIZE(hp_6630a_cg),
1273                 hp_6630a_cmd,
1274                 .probe_channels = NULL,
1275                 hp_6630a_init_acquisition,
1276                 hp_6630a_update_status,
1277         },
1278
1279         /* HP 6611C */
1280         { "HP", "6611C", SCPI_DIALECT_HP_66XXB, PPS_OTP,
1281                 ARRAY_AND_SIZE(hp_6630b_devopts),
1282                 ARRAY_AND_SIZE(hp_6630b_devopts_cg),
1283                 ARRAY_AND_SIZE(hp_6611c_ch),
1284                 ARRAY_AND_SIZE(hp_6630b_cg),
1285                 hp_6630b_cmd,
1286                 .probe_channels = NULL,
1287                 hp_6630b_init_acquisition,
1288                 hp_6630b_update_status,
1289         },
1290
1291         /* HP 6612C */
1292         { "HP", "6612C", SCPI_DIALECT_HP_66XXB, PPS_OTP,
1293                 ARRAY_AND_SIZE(hp_6630b_devopts),
1294                 ARRAY_AND_SIZE(hp_6630b_devopts_cg),
1295                 ARRAY_AND_SIZE(hp_6612c_ch),
1296                 ARRAY_AND_SIZE(hp_6630b_cg),
1297                 hp_6630b_cmd,
1298                 .probe_channels = NULL,
1299                 hp_6630b_init_acquisition,
1300                 hp_6630b_update_status,
1301         },
1302
1303         /* HP 6613C */
1304         { "HP", "6613C", SCPI_DIALECT_HP_66XXB, PPS_OTP,
1305                 ARRAY_AND_SIZE(hp_6630b_devopts),
1306                 ARRAY_AND_SIZE(hp_6630b_devopts_cg),
1307                 ARRAY_AND_SIZE(hp_6613c_ch),
1308                 ARRAY_AND_SIZE(hp_6630b_cg),
1309                 hp_6630b_cmd,
1310                 .probe_channels = NULL,
1311                 hp_6630b_init_acquisition,
1312                 hp_6630b_update_status,
1313         },
1314
1315         /* HP 6614C */
1316         { "HP", "6614C", SCPI_DIALECT_HP_66XXB, PPS_OTP,
1317                 ARRAY_AND_SIZE(hp_6630b_devopts),
1318                 ARRAY_AND_SIZE(hp_6630b_devopts_cg),
1319                 ARRAY_AND_SIZE(hp_6614c_ch),
1320                 ARRAY_AND_SIZE(hp_6630b_cg),
1321                 hp_6630b_cmd,
1322                 .probe_channels = NULL,
1323                 hp_6630b_init_acquisition,
1324                 hp_6630b_update_status,
1325         },
1326
1327         /* HP 6631B */
1328         { "HP", "6631B", SCPI_DIALECT_HP_66XXB, PPS_OTP,
1329                 ARRAY_AND_SIZE(hp_6630b_devopts),
1330                 ARRAY_AND_SIZE(hp_6630b_devopts_cg),
1331                 ARRAY_AND_SIZE(hp_6631b_ch),
1332                 ARRAY_AND_SIZE(hp_6630b_cg),
1333                 hp_6630b_cmd,
1334                 .probe_channels = NULL,
1335                 hp_6630b_init_acquisition,
1336                 hp_6630b_update_status,
1337         },
1338
1339         /* HP 6632B */
1340         { "HP", "6632B", SCPI_DIALECT_HP_66XXB, PPS_OTP,
1341                 ARRAY_AND_SIZE(hp_6630b_devopts),
1342                 ARRAY_AND_SIZE(hp_6630b_devopts_cg),
1343                 ARRAY_AND_SIZE(hp_6632b_ch),
1344                 ARRAY_AND_SIZE(hp_6630b_cg),
1345                 hp_6630b_cmd,
1346                 .probe_channels = NULL,
1347                 hp_6630b_init_acquisition,
1348                 hp_6630b_update_status,
1349         },
1350
1351         /* HP 66312A */
1352         { "HP", "66312A", SCPI_DIALECT_HP_66XXB, PPS_OTP,
1353                 ARRAY_AND_SIZE(hp_6630b_devopts),
1354                 ARRAY_AND_SIZE(hp_6630b_devopts_cg),
1355                 ARRAY_AND_SIZE(hp_66312a_ch),
1356                 ARRAY_AND_SIZE(hp_6630b_cg),
1357                 hp_6630b_cmd,
1358                 .probe_channels = NULL,
1359                 hp_6630b_init_acquisition,
1360                 hp_6630b_update_status,
1361         },
1362
1363         /* HP 66332A */
1364         { "HP", "66332A", SCPI_DIALECT_HP_66XXB, PPS_OTP,
1365                 ARRAY_AND_SIZE(hp_6630b_devopts),
1366                 ARRAY_AND_SIZE(hp_6630b_devopts_cg),
1367                 ARRAY_AND_SIZE(hp_66332a_ch),
1368                 ARRAY_AND_SIZE(hp_6630b_cg),
1369                 hp_6630b_cmd,
1370                 .probe_channels = NULL,
1371                 hp_6630b_init_acquisition,
1372                 hp_6630b_update_status,
1373         },
1374
1375         /* HP 6633B */
1376         { "HP", "6633B", SCPI_DIALECT_HP_66XXB, PPS_OTP,
1377                 ARRAY_AND_SIZE(hp_6630b_devopts),
1378                 ARRAY_AND_SIZE(hp_6630b_devopts_cg),
1379                 ARRAY_AND_SIZE(hp_6633b_ch),
1380                 ARRAY_AND_SIZE(hp_6630b_cg),
1381                 hp_6630b_cmd,
1382                 .probe_channels = NULL,
1383                 hp_6630b_init_acquisition,
1384                 hp_6630b_update_status,
1385         },
1386
1387         /* HP 6634B */
1388         { "HP", "6634B", SCPI_DIALECT_HP_66XXB, PPS_OTP,
1389                 ARRAY_AND_SIZE(hp_6630b_devopts),
1390                 ARRAY_AND_SIZE(hp_6630b_devopts_cg),
1391                 ARRAY_AND_SIZE(hp_6634b_ch),
1392                 ARRAY_AND_SIZE(hp_6630b_cg),
1393                 hp_6630b_cmd,
1394                 .probe_channels = NULL,
1395                 hp_6630b_init_acquisition,
1396                 hp_6630b_update_status,
1397         },
1398
1399         /* Rigol DP700 series */
1400         { "Rigol", "^DP711$", SCPI_DIALECT_UNKNOWN, 0,
1401                 ARRAY_AND_SIZE(rigol_dp700_devopts),
1402                 ARRAY_AND_SIZE(rigol_dp700_devopts_cg),
1403                 ARRAY_AND_SIZE(rigol_dp711_ch),
1404                 ARRAY_AND_SIZE(rigol_dp700_cg),
1405                 rigol_dp700_cmd,
1406                 .probe_channels = NULL,
1407                 .init_acquisition = NULL,
1408                 .update_status = NULL,
1409         },
1410         { "Rigol", "^DP712$", SCPI_DIALECT_UNKNOWN, 0,
1411                 ARRAY_AND_SIZE(rigol_dp700_devopts),
1412                 ARRAY_AND_SIZE(rigol_dp700_devopts_cg),
1413                 ARRAY_AND_SIZE(rigol_dp712_ch),
1414                 ARRAY_AND_SIZE(rigol_dp700_cg),
1415                 rigol_dp700_cmd,
1416                 .probe_channels = NULL,
1417                 .init_acquisition = NULL,
1418                 .update_status = NULL,
1419         },
1420
1421         /* Rigol DP800 series */
1422         { "Rigol", "^DP821A$", SCPI_DIALECT_UNKNOWN, PPS_OTP,
1423                 ARRAY_AND_SIZE(rigol_dp800_devopts),
1424                 ARRAY_AND_SIZE(rigol_dp800_devopts_cg),
1425                 ARRAY_AND_SIZE(rigol_dp821a_ch),
1426                 ARRAY_AND_SIZE(rigol_dp820_cg),
1427                 rigol_dp800_cmd,
1428                 .probe_channels = NULL,
1429                 .init_acquisition = NULL,
1430                 .update_status = NULL,
1431         },
1432         { "Rigol", "^DP831A$", SCPI_DIALECT_UNKNOWN, PPS_OTP,
1433                 ARRAY_AND_SIZE(rigol_dp800_devopts),
1434                 ARRAY_AND_SIZE(rigol_dp800_devopts_cg),
1435                 ARRAY_AND_SIZE(rigol_dp831_ch),
1436                 ARRAY_AND_SIZE(rigol_dp830_cg),
1437                 rigol_dp800_cmd,
1438                 .probe_channels = NULL,
1439                 .init_acquisition = NULL,
1440                 .update_status = NULL,
1441         },
1442         { "Rigol", "^(DP832|DP832A)$", SCPI_DIALECT_UNKNOWN, PPS_OTP,
1443                 ARRAY_AND_SIZE(rigol_dp800_devopts),
1444                 ARRAY_AND_SIZE(rigol_dp800_devopts_cg),
1445                 ARRAY_AND_SIZE(rigol_dp832_ch),
1446                 ARRAY_AND_SIZE(rigol_dp830_cg),
1447                 rigol_dp800_cmd,
1448                 .probe_channels = NULL,
1449                 .init_acquisition = NULL,
1450                 .update_status = NULL,
1451         },
1452
1453         /* Owon P4000 series */
1454         { "OWON", "^P4305$", SCPI_DIALECT_UNKNOWN, 0,
1455                 ARRAY_AND_SIZE(owon_p4000_devopts),
1456                 ARRAY_AND_SIZE(owon_p4000_devopts_cg),
1457                 ARRAY_AND_SIZE(owon_p4305_ch),
1458                 ARRAY_AND_SIZE(owon_p4000_cg),
1459                 owon_p4000_cmd,
1460                 .probe_channels = NULL,
1461                 .init_acquisition = NULL,
1462                 .update_status = NULL,
1463         },
1464         { "OWON", "^P4603$", SCPI_DIALECT_UNKNOWN, 0,
1465                 ARRAY_AND_SIZE(owon_p4000_devopts),
1466                 ARRAY_AND_SIZE(owon_p4000_devopts_cg),
1467                 ARRAY_AND_SIZE(owon_p4603_ch),
1468                 ARRAY_AND_SIZE(owon_p4000_cg),
1469                 owon_p4000_cmd,
1470                 .probe_channels = NULL,
1471                 .init_acquisition = NULL,
1472                 .update_status = NULL,
1473         },
1474
1475         /* Philips/Fluke PM2800 series */
1476         { "Philips", "^PM28[13][123]/[01234]{1,2}$", SCPI_DIALECT_PHILIPS, 0,
1477                 ARRAY_AND_SIZE(philips_pm2800_devopts),
1478                 ARRAY_AND_SIZE(philips_pm2800_devopts_cg),
1479                 NULL, 0,
1480                 NULL, 0,
1481                 philips_pm2800_cmd,
1482                 philips_pm2800_probe_channels,
1483                 .init_acquisition = NULL,
1484                 .update_status = NULL,
1485         },
1486
1487         /* Rohde & Schwarz HMC8043 */
1488         { "Rohde&Schwarz", "HMC8043", SCPI_DIALECT_UNKNOWN, 0,
1489                 ARRAY_AND_SIZE(rs_hmc8043_devopts),
1490                 ARRAY_AND_SIZE(rs_hmc8043_devopts_cg),
1491                 ARRAY_AND_SIZE(rs_hmc8043_ch),
1492                 ARRAY_AND_SIZE(rs_hmc8043_cg),
1493                 rs_hmc8043_cmd,
1494                 .probe_channels = NULL,
1495                 .init_acquisition = NULL,
1496                 .update_status = NULL,
1497         },
1498
1499         /* Hameg / Rohde&Schwarz HMP4000 series */
1500         /* TODO Match on regex, pass scpi_pps item to .probe_channels(). */
1501         { "HAMEG", "HMP4030", SCPI_DIALECT_HMP, 0,
1502                 ARRAY_AND_SIZE(rs_hmp4040_devopts),
1503                 ARRAY_AND_SIZE(rs_hmp4040_devopts_cg),
1504                 rs_hmp4040_ch, 3,
1505                 rs_hmp4040_cg, 3,
1506                 rs_hmp4040_cmd,
1507                 .probe_channels = NULL,
1508                 .init_acquisition = NULL,
1509                 .update_status = NULL,
1510         },
1511         { "HAMEG", "HMP4040", SCPI_DIALECT_HMP, 0,
1512                 ARRAY_AND_SIZE(rs_hmp4040_devopts),
1513                 ARRAY_AND_SIZE(rs_hmp4040_devopts_cg),
1514                 ARRAY_AND_SIZE(rs_hmp4040_ch),
1515                 ARRAY_AND_SIZE(rs_hmp4040_cg),
1516                 rs_hmp4040_cmd,
1517                 .probe_channels = NULL,
1518                 .init_acquisition = NULL,
1519                 .update_status = NULL,
1520         },
1521         { "ROHDE&SCHWARZ", "HMP2020", SCPI_DIALECT_HMP, 0,
1522                 ARRAY_AND_SIZE(rs_hmp4040_devopts),
1523                 ARRAY_AND_SIZE(rs_hmp4040_devopts_cg),
1524                 rs_hmp2020_ch, 2,
1525                 rs_hmp4040_cg, 2,
1526                 rs_hmp4040_cmd,
1527                 .probe_channels = NULL,
1528                 .init_acquisition = NULL,
1529                 .update_status = NULL,
1530         },
1531         { "ROHDE&SCHWARZ", "HMP2030", SCPI_DIALECT_HMP, 0,
1532                 ARRAY_AND_SIZE(rs_hmp4040_devopts),
1533                 ARRAY_AND_SIZE(rs_hmp4040_devopts_cg),
1534                 rs_hmp2030_ch, 3,
1535                 rs_hmp4040_cg, 3,
1536                 rs_hmp4040_cmd,
1537                 .probe_channels = NULL,
1538                 .init_acquisition = NULL,
1539                 .update_status = NULL,
1540         },
1541         { "ROHDE&SCHWARZ", "HMP4030", SCPI_DIALECT_HMP, 0,
1542                 ARRAY_AND_SIZE(rs_hmp4040_devopts),
1543                 ARRAY_AND_SIZE(rs_hmp4040_devopts_cg),
1544                 rs_hmp4040_ch, 3,
1545                 rs_hmp4040_cg, 3,
1546                 rs_hmp4040_cmd,
1547                 .probe_channels = NULL,
1548                 .init_acquisition = NULL,
1549                 .update_status = NULL,
1550         },
1551         { "ROHDE&SCHWARZ", "HMP4040", SCPI_DIALECT_HMP, 0,
1552                 ARRAY_AND_SIZE(rs_hmp4040_devopts),
1553                 ARRAY_AND_SIZE(rs_hmp4040_devopts_cg),
1554                 ARRAY_AND_SIZE(rs_hmp4040_ch),
1555                 ARRAY_AND_SIZE(rs_hmp4040_cg),
1556                 rs_hmp4040_cmd,
1557                 .probe_channels = NULL,
1558                 .init_acquisition = NULL,
1559                 .update_status = NULL,
1560         },
1561 };
1562
1563 SR_PRIV unsigned int num_pps_profiles = ARRAY_SIZE(pps_profiles);