]> sigrok.org Git - libsigrok.git/blob - src/hardware/saleae-logic16/protocol.h
Add support for mcupro Logic16, a Saleae Logic16 clone.
[libsigrok.git] / src / hardware / saleae-logic16 / protocol.h
1 /*
2  * This file is part of the libsigrok project.
3  *
4  * Copyright (C) 2013 Marcus Comstedt <marcus@mc.pp.se>
5  * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
6  * Copyright (C) 2012 Joel Holdsworth <joel@airwebreathe.org.uk>
7  *
8  * This program is free software: you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License as published by
10  * the Free Software Foundation, either version 3 of the License, or
11  * (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
20  */
21
22 #ifndef LIBSIGROK_HARDWARE_SALEAE_LOGIC16_PROTOCOL_H
23 #define LIBSIGROK_HARDWARE_SALEAE_LOGIC16_PROTOCOL_H
24
25 #include <stdint.h>
26 #include <glib.h>
27 #include "libsigrok.h"
28 #include "libsigrok-internal.h"
29
30 #define LOG_PREFIX "saleae-logic16"
31
32 enum voltage_range {
33         VOLTAGE_RANGE_UNKNOWN,
34         VOLTAGE_RANGE_18_33_V,  /* 1.8V and 3.3V logic */
35         VOLTAGE_RANGE_5_V,      /* 5V logic */
36 };
37
38 enum fpga_variant {
39         FPGA_VARIANT_ORIGINAL,
40         FPGA_VARIANT_MCUPRO    /* mcupro clone v4.6 with Actel FPGA */
41 };
42
43 /** Private, per-device-instance driver context. */
44 struct dev_context {
45         /** Distinguishing between original Logic16 and clones */
46         enum fpga_variant fpga_variant;
47
48         /*
49          * Since we can't keep track of a Logic16 device after upgrading
50          * the firmware (it renumerates into a different device address
51          * after the upgrade) this is like a global lock. No device will open
52          * until a proper delay after the last device was upgraded.
53          */
54         int64_t fw_updated;
55
56         /** The currently configured samplerate of the device. */
57         uint64_t cur_samplerate;
58
59         /** Maximum number of samples to capture, if nonzero. */
60         uint64_t limit_samples;
61
62         /** The currently configured input voltage of the device. */
63         enum voltage_range cur_voltage_range;
64
65         /** The input voltage selected by the user. */
66         enum voltage_range selected_voltage_range;
67
68         /** Channels to use. */
69         uint16_t cur_channels;
70
71         /* EEPROM data from address 8. */
72         uint8_t eeprom_data[8];
73
74         int64_t sent_samples;
75         int submitted_transfers;
76         int empty_transfer_count;
77         int num_channels;
78         int cur_channel;
79         uint16_t channel_masks[16];
80         uint16_t channel_data[16];
81         uint8_t *convbuffer;
82         size_t convbuffer_size;
83         struct soft_trigger_logic *stl;
84         gboolean trigger_fired;
85
86         void *cb_data;
87         unsigned int num_transfers;
88         struct libusb_transfer **transfers;
89         struct sr_context *ctx;
90 };
91
92 SR_PRIV int logic16_setup_acquisition(const struct sr_dev_inst *sdi,
93                         uint64_t samplerate, uint16_t channels);
94 SR_PRIV int logic16_start_acquisition(const struct sr_dev_inst *sdi);
95 SR_PRIV int logic16_abort_acquisition(const struct sr_dev_inst *sdi);
96 SR_PRIV int logic16_init_device(const struct sr_dev_inst *sdi);
97 SR_PRIV void logic16_receive_transfer(struct libusb_transfer *transfer);
98
99 #endif